Regulation 2023/1190 - Amendment of Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products - Main contents

a glass-transition temperature of 210 °C or more,

a weight average molecular weight (Mw) of 35 000 or more but not more than 80 000 ,

an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram

each outer layer with a thickness of 7 μm or more but not more than 80 μm,

with a tensile strength of 300 N/cm2 or more (ASTM D-882),

with a total thickness of 200 μm or more but not more than 350 μm, and

with a width of 600 mm or more but not more than 1 600 mm,

covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites

having a weight of 20 g/m2 or more, but not more than 214 g/m2,

surface treated with an organosilane coupling agent,

in rolls,

having a humidity content by weight of 0,13 % or less, and

having not more than 3 hollow fibres out of 100 000 fibres,

of the inline type,

with a cylinder capacity of 7 000 cm3 or more but not more than 18 100 cm3,

with a power of 205 kW or more but not more than 597 kW,

with an exhaust after-treatment module,

with external width/height/depth dimensions of not more than 1 310 /1 300 /1 040 mm or 2 005 /1 505 /1 300 mm or 2 005 /1 505 /1 800 mm,

a multiple-phase winding,

an external diameter of 24 mm or more but not more than 38 mm,

a rated speed of not more than 12 000 rpm,

a power supply voltage of 8 V or more but not more than 27 V,

with or without a pulley,

with or without a gear wheel

a length of 16,8 mm or more, but not more than 110,2 mm,

a width of 14,8 mm or more, but not more than 75,2 mm,

a thickness of 4,8 mm or more, but not more than 13,2 mm,

a length of 150 mm or more, but not more than 1 310 mm,

a width of 100 mm or more, but not more than 1 000 mm,

a height of 200 mm or more, but not more than 1 500 mm,

a weight of 75 kg or more, but not more than 200 kg,

a nominal capacity not less than 58 Ah and not more than 500 Ah,

a nominal output voltage of 230V AC (line to neutral) or a nominal voltage of 50V (± 10 %)

a coil operating voltage of 12 VDC (Voltage Direct Current) or more, but not more than 24 VDC (Voltage Direct Current),

a contact current carrying capacity of 5A or more, but not more than 15A,

a contact voltage of 80 VAC (Voltage Alternating Current) or more, but not more than 270 VAC (Voltage Alternating Current),

outer dimensions of 19 mm (± 0,4 mm) x 15,2 mm (± 0,4 mm) x 15,5 mm (± 0,4 mm),

AC socket (for power cord connection) of 230 V,

integrated noise filter composed of capacitors and inductors,

cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,

comprising at least a plastic box with printed circuit board, with operating direct voltage of 9 V or more, but not more than 16 V,

whether or not with metal holder,

able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,

with or without a metal housing,

with or without a graphite carbon shield mounted in a mini-Vogel type system,

with or without separate pyrolytic carbon blocks used as heating elements, and

a cathode temperature of less than 1 800 K at a filament current of 1,26 A

dual clutch,

7 or more forward gears,

1 reverse gear,

a maximum torque of 390 Nm,

whether or not with electric motor integrated,

a height of 400 mm or more but not more than 600 mm,

a width 350 mm or more but not more than 600 mm, and

a weight of 70 kg or more but not more than 110 kg,

rear derailleur and mounting articles,

with or without front derailleur,

motorized focus, zoom, aperture,

electronically switchable infrared cut filter,

an adjustable focal length not less than 2,7 mm and not more than 55mm,

a weight of not more than 120 g,

a length of less than 70 mm,

a diameter of not more than 70 mm

not more than 75 % of tetrabutyltin (CAS RN 1461-25-2),

not more than 20 % of tributyltin chloride (CAS RN 1461-22-9),

not more than 4 % of dibutyltin dichloride (CAS RN 683-18-1),

tributyltin chloride (CAS RN 1461-22-9) with a purity by weight of 80 % or more,

not more than 5 % tetrabutyltin (CAS RN 1461-25-2),

not more than 6 % dibutyltin dichloride (CAS RN 683-18-1),

not more than 11 % o-xylene (CAS RN 95-47-6),

60 % or more but not more than 70 % of calcium rel-(1R,2S)-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1),

30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1),

1 % or more but not more than 5 % of CI Pigment Blue 29 (CAS RN 57455-37-5) and

1 % or more but not more than 5 % of CI Pigment Violet 15 (CAS RN 12769-96-9)

of iron or steel alloy,

with a heat resistance of 830 °C or more but not more than 1 050  °C,

with an external diameter of not more than 92 mm,

with holes for holding the gas flow control blades,

of iron or steel alloy,

with a heat resistance of 830 °C or more but not more than 1 050  °C,

with an external diameter of not more than 92,5 mm,

with an internal diameter of not more than 62 mm,

with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm,

with a weight of 0,02 kg or more, but not more than 0,25 kg,

containing by weight 0,55 %, or more but not more than 0,61 % of magnesium,

containing by weight 0,55 %, or more but not more than 0,61 % of silicon,

with a hardening state of T5 or T6,

with a mass of 0,05 kg or more, but not more than 0,2 kg,

with a weight of 3 g or more but not more than 400 g,

manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade,

being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly,

with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line),

with sockets designed for brazing or fastening,

with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm,

a weight of 4,0 kg or more but not more than 5,5 kg,

a wall thickness of 2,0 mm or more but not more than 6,0 mm,

with an outer diameter of 54 mm or more but not more than 130 mm,

with a height of 8 mm or more but not more than 30 mm,

with two discs connected by blades of involute shape,

with or without dowel, and with or without washer,

a heat resistance of 200 °C or more but not more than 250 °C,

one or more fixing points suitable for mounting an actuator,

consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding,

containing internal baffles responsible for the proper flow of coolant,

with a length of 190 mm or more, but not more than 460 mm,

with a diameter of 9 mm or more, but not more than 42 mm,

with a weight of 0,01 kg or more, but not more than 0,45 kg,

whether or not having aluminium connection blocks,

a continuous power of 140 kW or more but not more than 180 kW,

a liquid cooled system,

a total length of 580 mm or more but not more than 730 mm,

a total width of 550 mm or more but not more than 670 mm,

a total height of 510 mm or more but not more than 630 mm,

with a weight of not more than 390 kg,

with or without reduction gear,

with or without starter generator,

2 mounting points,

a length of 200 mm or more but not more than 205 mm,

a width of 58 mm or more but not more than 62 mm,

a height of 25 mm or more but not more than 30 mm,

containing at least printed circuit board and loudspeaker,

in a plastic housing with a holder,

a printed circuit board in plastic housing,

LIN and CAN buses,

a programmable memory,

a signal processor,

an operating direct current voltage of 9 V or more but not more than 16 V,

at least one connector,

whether or not with metal mounting bracket,

two cardan rods,

central universal joint,

central bearing with suspension in a plastic cover,

universal joints on both ends of the shaft,

slip, tube and end yokes,

of a length of 1,4 m or more but not more than 2,4 m,