Annexes to COM(2024)297 - EU position in the Partnership Council regarding modifications to Annex 3 to the Trade and Cooperation Agreement with the United Kingdom

Please note

This page contains a limited version of this dossier in the EU Monitor.

dossier COM(2024)297 - EU position in the Partnership Council regarding modifications to Annex 3 to the Trade and Cooperation Agreement with the ...
document COM(2024)297 EN
date September 23, 2024
Agreement between the European Union and the European Atomic Energy Community, of the one part, and the United Kingdom of Great Britain and Northern Ireland, of the other part, and of the Agreement between the European Union and the United Kingdom of Great Britain and Northern Ireland concerning security procedures for exchanging and protecting classified information (OJ L 149, 30.4.2021, p. 2).

(2) Decision No 1/2023 of the Partnership Council established by the Trade and Cooperation Agreement between the European Union and the European Atomic Energy Community, of the one part, and the United Kingdom of Great Britain and Northern Ireland, of the other part of 21 December 2023 as regards the transitional product-specific rules of origin for electric accumulators and electrified vehicles (OJ L, 2023/2891, 28.12.2023, ELI: http://data.europa.eu/eli/dec/2023/2891/oj).


DRAFT

DECISION No …/… OF THE PARTNERSHIP COUNCIL ESTABLISHED BY THE TRADE AND COOPERATION AGREEMENT BETWEEN THE EUROPEAN UNION AND THE EUROPEAN ATOMIC ENERGY COMMUNITY, OF THE ONE PART, AND THE UNITED KINGDOM OF GREAT BRITAIN AND NORTHERN IRELAND, OF THE OTHER PART

of …

modifying Annex 3 to the Trade and Cooperation Agreement between the European Union and the European Atomic Energy Community, of the one part, and the United Kingdom of Great Britain and Northern Ireland, of the other part (Product Specific Rules of Origin)

THE PARTNERSHIP COUNCIL,

Having regard to the Trade and Cooperation Agreement between the European Union and the European Atomic Energy Community, of the one part, and the United Kingdom of Great Britain and Northern Ireland, of the other part, and in particular Article 7(4)(c) and Article 68 thereof,

Whereas:

(1)Pursuant to Articles 7 and 68 of the Trade and Cooperation Agreement between the European Union and the European Atomic Energy Community, of the one part, and the United Kingdom of Great Britain and Northern Ireland, of the other part (the ‘Trade and Cooperation Agreement’), the Partnership Council may amend Chapter 2, ‘Rules of origin’, of Title I, ‘Trade in Goods’, of Heading One, ‘Trade’, of Part Two, ‘Trade, transport, fisheries and other arrangements’, and its annexes such as Annex 3, which concerns the Product Specific Rules of Origin indicating the working or processing required to be carried out on non-originating materials in order that the product manufactured can obtain originating status.

(2)The current Annex 3 to the Trade and Cooperation Agreement contains descriptions of Harmonised System (‘HS’) chapters, headings or sub-headings and product-specific rules of origin that reflect the HS 2017.

(3)Amendments were introduced on 1 January 2022 into the Nomenclature governed by the International Convention on the Harmonized Commodity Description and Coding System. The Parties to the Trade and Cooperation Agreement have therefore agreed upon updating Annex 3 to reflect the HS 2022.

(4)Annex 3 to the Trade and Cooperation Agreement shall be modified to reflect changes in the wording of the HS 2022 chapters, headings or sub-headings.

(5)For those chapters of the HS, which now include products from other chapters or headings because of the changes to the HS, the product-specific rules of origin were in principle subject to modification to keep the rules unchanged for the products moving to these HS headings. In reality, this was needed in only a few instances (in particular concerning headings 24.03, 24.04, 38.27, 84.79 and 85.24).

(6)In its Decision No 1/2023, the Partnership Council provided that Annex 3 to the Trade and Cooperation Agreement shall not be amended for products listed in Annex 5 to the Trade and Cooperation Agreement, except when the amendment is due to updates of the HS. This Decision is therefore compliant with Decision No 1/2023 of the Partnership Council.

(7)For the sake of better readability, the Section and Chapter headings should appear in bold.

(8)Annex 3 to the Trade and Cooperation Agreement should therefore be modified. Those modifications do not constitute substantive changes to the negotiated rules of origin,

HAS ADOPTED THIS DECISION:

Article 1

Annex 3 to the Trade and Cooperation Agreement containing the Product Specific Rules of Origin is hereby replaced by Annex 3 set out in Annex 1 to this Decision.

Article 2

This Decision shall enter into force 60 days after the date of its adoption.

Done at …, …

For the Partnership Council

The Co-Chairs

ANNEX 1

‘ANNEX 3

PRODUCT-SPECIFIC RULES OF ORIGIN

Column 1

Harmonised System classification (2022) including specific description
Column 2

Product-specific rule of origin
SECTION ILIVE ANIMALS; ANIMAL PRODUCTS
Chapter 1Live animals
01.01-01.06All animals of Chapter 1 are wholly obtained
Chapter 2Meat and edible meat offal
02.01-02.10Production in which all the materials of Chapters 1 and 2 used are wholly obtained
Chapter 3Fish and crustaceans, molluscs and other aquatic invertebrates
03.01-03.09Production in which all the materials of Chapter 3 used are wholly obtained
Chapter 4Dairy produce; birds’ eggs; natural honey; edible products of animal origin, not elsewhere specified or included
04.01-04.10Production in which:

—all the materials of Chapter 4 used are wholly obtained; and

—the total weight of non-originating materials of headings 17.01 and 17.02 does not exceed 20 % of the weight of the product
Chapter 5Products of animal origin, not elsewhere specified or included
05.01-05.11Production from non-originating materials of any heading
SECTION IIVEGETABLE PRODUCTS
Chapter 6Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliage
06.01-06.04Production in which all the materials of Chapter 6 used are wholly obtained
Chapter 7Edible vegetables and certain roots and tubers
07.01-07.14Production in which all the materials of Chapter 7 used are wholly obtained
Chapter 8Edible fruit and nuts; peel of citrus fruit or melons
08.01-08.14Production in which:

—all the materials of Chapter 8 used are wholly obtained; and

—the total weight of non-originating materials of headings 17.01 and 17.02 does not exceed 20 % of the weight of the product
Chapter 9Coffee, tea, maté and spices
09.01-09.10Production from non-originating materials of any heading
Chapter 10Cereals
10.01-10.08Production in which all the materials of Chapter 10 used are wholly obtained
Chapter 11Products of the milling industry; malt; starches; inulin; wheat gluten
11.01-11.09Production in which all materials of Chapters 10 and 11, headings 07.01, 07.14, 23.02 to 23.03 or subheading 0710.10 used are wholly obtained
Chapter 12Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodder
12.01-12.14CTH
Chapter 13Lac; gums, resins and other vegetable saps and extracts
13.01-13.02Production from non-originating materials of any heading in which the total weight of non-originating materials of headings 17.01 and 17.02 does not exceed 20 % of the weight of the product
Chapter 14Vegetable plaiting materials; vegetable products not elsewhere specified or included
14.01-14.04Production from non-originating materials of any heading
SECTION IIIANIMAL, VEGETABLE OR MICROBIAL FATS AND OILS AND THEIR CLEAVAGE PRODUCTS; PREPARED EDIBLE FATS; ANIMAL OR VEGETABLE WAXES
Chapter 15Animal or vegetable or microbial fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes
15.01-15.04CTH
15.05-15.06Production from non-originating materials of any heading
15.07-15.08CTSH
15.09-15.10Production in which all the vegetable materials used are wholly obtained
15.11-15.15CTSH
15.16-15.17CTH
15.18-15.19CTSH
15.20Production from non-originating materials of any heading
15.21-15.22CTSH
SECTION IVPREPARED FOODSTUFFS; BEVERAGES, SPIRITS AND VINEGAR; TOBACCO AND MANUFACTURED TOBACCO SUBSTITUTES; PRODUCTS, WHETHER OR NOT CONTAINING NICOTINE, INTENDED FOR INHALATION WITHOUT COMBUSTION; OTHER NICOTINE CONTAINING PRODUCTS INTENDED FOR THE INTAKE OF NICOTINE INTO THE HUMAN BODY
Chapter 16Preparations of meat, of fish or of crustaceans, molluscs or other aquatic invertebrates, or of insects
1601.00-1604.18Production in which all the materials of Chapters 1, 2, 3 and 16 used are wholly obtained (1)
1604.19CC
1604.20
–Preparations of surimi:
CC
–Others:
Production in which all the materials of Chapters 3 and 16 used are wholly obtained (2)
1604.31-1605.69Production in which all the materials of Chapters 3 and 16 used are wholly obtained
Chapter 17Sugars and sugar confectionery
17.01CTH
17.02CTH, provided that the total weight of non-originating materials of headings 11.01 to 11.08, 17.01 and 17.03 used does not exceed 20 % of the weight of the product
17.03CTH
17.04
–White chocolate:
CTH, provided that:

(a)all the materials of Chapter 4 used are wholly obtained; and

(b)
(i)the total weight of non-originating materials of headings 17.01 and 17.02 used does not exceed 40 % of the weight of the product; or

(ii)the value of non-originating materials of headings 17.01 and 17.02 used does not exceed 30 % of the ex-works price of the product
–Others:
CTH, provided that:

—all the materials of Chapter 4 used are wholly obtained; and

—the total weight of non-originating materials of headings 17.01 and 17.02 used does not exceed 40 % of the weight of the product
Chapter 18Cocoa and cocoa preparations
18.01-18.05CTH
1806.10CTH, provided that:

—all the materials of Chapter 4 used are wholly obtained, and

—the total weight of non-originating materials of headings 17.01 and 17.02 used does not exceed 40 % of the weight of the product
1806.20-1806.90CTH, provided that:

(a)all the materials of Chapter 4 used are wholly obtained, and

(b)
(i)the total weight of non-originating materials of headings 17.01 and 17.02 used does not exceed 40 % of the weight of the product; or

(ii)the value of non-originating materials of headings 17.01 and 17.02 used does not exceed 30 % of the ex-works price of the product
Chapter 19Preparations of cereals, flour, starch or milk; pastrycooks’ products
19.01-19.05CTH, provided that:

—all the materials of Chapter 4 used are wholly obtained,

—the total weight of non-originating materials of Chapters 2, 3 and 16 used does not exceed 20 % of the weight of the product,

—the total weight of non-originating materials of headings 10.06 and 11.08 used does not exceed 20 % of the weight of the product, and

—the total weight of non-originating materials of headings 17.01 and 17.02 used does not exceed 40 % of the weight of the product
Chapter 20Preparations of vegetables, fruit, nuts or other parts of plants
20.01CTH
20.02-20.03Production in which all the materials of Chapter 7 used are wholly obtained
20.04-20.09CTH, provided that the total weight of non-originating materials of headings 17.01 and 17.02 used does not exceed 40 % of the weight of the product
Chapter 21Miscellaneous edible preparations
21.01-21.02CTH, provided that:

—all the materials of Chapter 4 used are wholly obtained, and

—the total weight of non-originating materials of headings 17.01 and 17.02 used does not exceed 20 % of the weight of the product
2103.10

2103.20

2103.90
CTH; however, non-originating mustard flour or meal or prepared mustard may be used
2103.30Production from non-originating materials of any heading
21.04-21.06CTH, provided that:

—all the materials of Chapter 4 used are wholly obtained, and

—the total weight of non-originating materials of headings 17.01 and 17.02 used does not exceed 20 % of the weight of the product
Chapter 22Beverages, spirits and vinegar
22.01-22.06CTH except from non-originating materials of headings 22.07 and 22.08, provided that:

—all the materials of subheadings 0806.10, 2009.61, 2009.69 used are wholly obtained,

—all the materials of Chapter 4 used are wholly obtained, and

—the total weight of non-originating materials of headings 17.01 and 17.02 used does not exceed 20 % of the weight of the product
22.07CTH except from non-originating materials of heading 22.08, provided that all the materials of Chapter 10, subheadings 0806.10, 2009.61 and 2009.69 used are wholly obtained
22.08-22.09CTH except from non-originating materials of headings 22.07 and 22.08, provided that all the materials of subheadings 0806.10, 2009.61 and 2009.69 used are wholly obtained
Chapter 23Residues and waste from the food industries; prepared animal fodder
23.01CTH
2302.10-2303.10CTH, provided that the total weight of non-originating materials of Chapter 10 used does not exceed 20 % of the weight of the product
2303.20-2308.00CTH
23.09CTH, provided that:

—all the materials of Chapters 2 and 4 used are wholly obtained,

—the total weight of non-originating materials of headings 10.01 to 10.04, 10.07 to 10.08, Chapter 11, and headings 23.02 and 23.03 used does not exceed 20 % of the weight of the product, and

—the total weight of non-originating materials of headings 17.01 and 17.02 used does not exceed 20 % of the weight of the product
Chapter 24Tobacco and manufactured tobacco substitutes; products, whether or not containing nicotine, intended for inhalation without combustion; other nicotine containing products intended for the intake of nicotine into the human body
24.01Production in which all materials of heading 24.01 are wholly obtained
2402.10Production from non-originating materials of any heading, provided that the total weight of non-originating materials of heading 24.01 used does not exceed 30 % of the weight of materials of Chapter 24 used
2402.20Production from non-originating materials of any heading, except that of the product and of smoking tobacco of subheading 2403.19, and in which at least 10 % by weight of all materials of heading 24.01 used is wholly obtained
2402.90Production from non-originating materials of any heading, provided that the total weight of non-originating materials of heading 24.01 used does not exceed 30 % of the weight of materials of Chapter 24 used
2403.11-2404.11CTH, in which at least 10 % by weight of all materials of heading 24.01 used are wholly obtained
2404.12-2404.99CTH
SECTION VMINERAL PRODUCTS

Section note: For definitions of horizontal processing rules within this Section, see Note 5 of Annex 2
Chapter 25Salt; sulphur; earths and stone; plastering materials, lime and cement
25.01-25.30CTH;

or

MaxNOM 70 % (EXW)
Chapter 26Ores, slag and ash
26.01-26.21CTH
Chapter 27Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes
27.01-27.09Production from non-originating materials of any heading
27.10CTH except from non-originating biodiesel of subheading 3824.99 or 3826.00;

or

Distillation or a chemical reaction is undergone, provided that biodiesel (including hydrotreated vegetable oil) of heading 27.10 and subheadings 3824.99 and 3826.00 used is obtained by esterification, transesterification or hydrotreatment
27.11-27.15Production from non-originating materials of any heading
SECTION VIPRODUCTS OF THE CHEMICAL OR ALLIED INDUSTRIES

Section note: For definitions of horizontal processing rules within this Section, see Note 5 of Annex 2
Chapter 28Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes
28.01-28.53CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
Chapter 29Organic chemicals
2901.10-2905.42CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
2905.43-2905.44CTH except from non-originating materials of heading 17.02 and subheading 3824.60
2905.45CTSH, however, non-originating materials of the same subheading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product;

or

MaxNOM 50 % (EXW)
2905.49-2942CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
Chapter 30Pharmaceutical products
30.01-30.06CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
Chapter 31Fertilisers
31.01-31.04CTH, however, non-originating materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the EXW of the product;

or

MaxNOM 40 % (EXW)
31.05
–Sodium nitrate

–Calcium cyanamide

–Potassium sulphate

–Magnesium potassium sulphate
CTH, however, non-originating materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the EXW of the product;

or

MaxNOM 40 % (EXW)
–Others
CTH, however, non-originating materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the EXW of the product, and in which the value of all non-originating materials used does not exceed 50 % of the EXW of the product;

or

MaxNOM 40 % (EXW)
Chapter 32Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks
32.01-32.15CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
Chapter 33Essential oils and resinoids; perfumery, cosmetic or toilet preparations
33.01CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
3302.10CTH, however, non-originating materials of subheading 3302.10 may be used, provided that their total value does not exceed 20 % of the EXW of the product
3302.90CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
33.03Production from non-originating materials of any heading
33.04-33.07CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
Chapter 34Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, “dental waxes” and dental preparations with a basis of plaster
34.01-34.07CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
Chapter 35Albuminoidal substances; modified starches; glues; enzymes
35.01-35.04CTH except from non-originating materials of Chapter 4
35.05CTH except from non-originating materials of heading 11.08
35.06-35.07CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
Chapter 36Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations
36.01-36.06CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
Chapter 37Photographic or cinematographic goods
37.01-37.07CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
Chapter 38Miscellaneous chemical products
38.01-38.08CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
3809.10CTH except from non-originating materials of headings 11.08 and 35.05
3809.91-3822.90CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
38.23Production from non-originating material of any heading
3824.10-3824.50CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
3824.60CTH except from non-originating materials of subheadings 2905.43 and 2905.44
3824.81-3825.90CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
38.26Production in which biodiesel is obtained through transesterification, esterification or hydro-treatment
38.27CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
SECTION VIIPLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF

Section note: For definitions of horizontal processing rules within this Section, see Note 5 of Annex 2
Chapter 39Plastics and articles thereof
39.01-39.15CTSH;

A chemical reaction, purification, mixing and blending, production of standard materials, a change in particle size, isomer separation, or biotechnological processing is undergone;

or

MaxNOM 50 % (EXW)
39.16-39.19CTH;

or

MaxNOM 50 % (EXW)
39.20CTSH;

or

MaxNOM 50 % (EXW)
39.21-39.22CTH;

or

MaxNOM 50 % (EXW)
3923.10-3923.50CTSH;

or

MaxNOM 50 % (EXW)
3923.90-3925.90CTH;

or

MaxNOM 50 % (EXW)
39.26CTSH;

or

MaxNOM 50 % (EXW)
Chapter 40Rubber and articles thereof
40.01-40.11CTH;

or

MaxNOM 50 % (EXW)
4012.11-4012.19CTSH;

or

Retreading of used tyres
4012.20-4017.00CTH;

or

MaxNOM 50 % (EXW)
SECTION VIIIRAW HIDES AND SKINS, LEATHER, FURSKINS AND ARTICLES THEREOF; SADDLERY AND HARNESS; TRAVEL GOODS, HANDBAGS AND SIMILAR CONTAINERS; ARTICLE OF ANIMAL GUT (OTHER THAN SILK-WORM GUT)
Chapter 41Raw hides and skins (other than furskins) and leather
41.01-4104.19CTH
4104.41-4104.49CTSH except from non-originating materials of subheadings 4104.41 to 4104.49
4105.10CTH
4105.30CTSH
4106.21CTH
4106.22CTSH
4106.31CTH
4106.32-4106.40CTSH
4106.91CTH
4106.92CTSH
41.07-41.13CTH except from non-originating materials of subheadings 4104.41, 4104.49, 4105.30, 4106.22, 4106.32 and 4106.92. However, non-originating materials of subheadings 4104.41, 4104.49, 4105.30, 4106.22, 4106.32 or 4106.92 may be used provided that they undergo a retanning operation
4114.10CTH
4114.20CTH except from non-originating materials of subheadings 4104.41, 4104.49, 4105.30, 4106.22, 4106.32, 4106.92 and 4107. However, non-originating materials of subheadings 4104.41, 4104.49, 4105.30, 4106.22, 4106.32, 4106.92 and heading 41.07 may be used provided that they undergo a retanning operation
41.15CTH
Chapter 42Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk-worm gut)
42.01-42.06CTH;

or

MaxNOM 50 % (EXW)
Chapter 43Furskins and artificial fur; manufactures thereof
4301.10-4302.20CTH;

or

MaxNOM 50 % (EXW)
4302.30CTSH
43.03-43.04CTH;

or

MaxNOM 50 % (EXW)
SECTION IXWOOD AND ARTICLES OF WOOD; WOOD CHARCOAL; CORK AND ARTICLES OF CORK; MANUFACTURES OF STRAW, OF ESPARTO OR OTHER PLAITING MATERIALS; BASKETWARE AND WICKERWORK
Chapter 44Wood and articles of wood; wood charcoal
44.01-44.21CTH;

or

MaxNOM 50 % (EXW)
Chapter 45Cork and articles of cork
45.01-45.04CTH;

or

MaxNOM 50 % (EXW)
Chapter 46Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork
46.01-46.02CTH;

or

MaxNOM 50 % (EXW)
SECTION XPULP OF WOOD OR OF OTHER FIBROUS CELLULOSIC MATERIAL; RECOVERED (WASTE AND SCRAP) PAPAER OR PAPERBOARD; PAPER AND PAPERBOARD AND ARTICLES THEREOF
Chapter 47Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboard
47.01-47.07CTH;

or

MaxNOM 50 % (EXW)
Chapter 48Paper and paperboard; articles of paper pulp, of paper or of paperboard
48.01-48.23CTH;

or

MaxNOM 50 % (EXW)
Chapter 49Printed books, newspapers, pictures and other products of the printing

industry; manuscripts, typescripts and plans
49.01-49.11CTH;

or

MaxNOM 50 % (EXW)
SECTION XITEXTILES AND TEXTILE ARTICLES

Section note: For definitions of terms used for tolerances applicable to certain products made of textile materials, see Notes 6, 7 and 8 of Annex 2
Chapter 50Silk
50.01-50.02CTH
50.03
–Carded or combed:
Carding or combing of silk waste
–Others:
CTH
50.04-50.05Spinning of natural fibres;

Extrusion of man-made continuous filament combined with spinning;

Extrusion of man-made continuous filament combined with twisting;

or

Twisting combined with any mechanical operation
50.06
–Silk yarn and yarn spun from silk waste:
Spinning of natural fibres;

Extrusion of man-made continuous filament combined with spinning;

Extrusion of man-made continuous filament combined with twisting;

or

Twisting combined with any mechanical operation
–Silk-worm gut:
CTH
50.07Spinning of natural or man-made staple fibres combined with weaving;

Extrusion of man-made filament yarn combined with weaving;

Twisting or any mechanical operation combined with weaving;

Weaving combined with dyeing;

Yarn dyeing combined with weaving;

Weaving combined with printing;

or

Printing (as standalone operation)
Chapter 51Wool, fine or coarse animal hair; horsehair yarn and woven fabric
51.01-51.05CTH
51.06-51.10Spinning of natural fibres;

Extrusion of man-made fibres combined with spinning;

or

Twisting combined with any mechanical operation
51.11-51.13Spinning of natural or man-made staple fibres combined with weaving;

Extrusion of man-made filament yarn combined with weaving;

Weaving combined with dyeing;

Yarn dyeing combined with weaving;

Weaving combined with printing;

or

Printing (as standalone operation)
Chapter 52Cotton
52.01-52.03CTH
52.04-52.07Spinning of natural fibres;

Extrusion of man-made fibres combined with spinning;

or

Twisting combined with any mechanical operation
52.08-52.12Spinning of natural or man-made staple fibres combined with weaving;

Extrusion of man-made filament yarn combined with weaving;

Twisting or any mechanical operation combined with weaving;

Weaving combined with dyeing or with coating or with laminating;

Yarn dyeing combined with weaving;

Weaving combined with printing;

or

Printing (as standalone operation)
Chapter 53Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn
53.01-53.05CTH
53.06-53.08Spinning of natural fibres;

Extrusion of man-made fibres combined with spinning;

or

Twisting combined with any mechanical operation
53.09-53.11Spinning of natural or man-made staple fibres combined with weaving;

Extrusion of man-made filament yarn combined with weaving;

Weaving combined with dyeing or with coating or with laminating;

Yarn dyeing combined with weaving;

Weaving combined with printing;

or

Printing (as standalone operation)
Chapter 54Man-made filaments; strip and the like of man-made textile materials
54.01-54.06Spinning of natural fibres;

Extrusion of man-made fibres combined with spinning;

or

Twisting combined with any mechanical operation
54.07-54.08Spinning of natural or man-made staple fibres combined with weaving;

Extrusion of man-made filament yarn combined with weaving;

Yarn dyeing combined with weaving;

Weaving combined with dyeing or with coating or with laminating;

Twisting or any mechanical operation combined with weaving;

Weaving combined with printing;

or

Printing (as standalone operation)
Chapter 55Man-made staple fibres
55.01-55.07Extrusion of man-made fibres
55.08-55.11Spinning of natural fibres;

Extrusion of man-made fibres combined with spinning;

or

Twisting combined with any mechanical operation
55.12-55.16Spinning of natural or man-made staple fibres combined with weaving;

Extrusion of man-made filament yarn combined with weaving;

Twisting or any mechanical operation combined with weaving;

Weaving combined with dyeing or with coating or with laminating;

Yarn dyeing combined with weaving;

Weaving combined with printing;

or

Printing (as standalone operation)
Chapter 56Wadding, felt and nonwovens; special yarns; twine, cordage, ropes and cables and articles thereof
56.01Spinning or bonding of natural fibres;

Extrusion of man-made fibres combined with spinning or bonding;

Flocking combined with dyeing or with printing;

or

Coating, flocking, laminating, or metalizing combined with at least two other main preparatory or finishing operations (such as calendering, shrink-resistance processes, heat setting, permanent finishing), provided that the value of non-originating materials used does not exceed 50 % of the EXW of the product
56.02
–Needleloom Felt:
Extrusion of man-made fibres combined with fabric formation; however:

—non-originating polypropylene filament of heading 54.02,

—non-originating polypropylene fibres of heading 55.03 or 55.06, or

—non-originating polypropylene filament tow of heading 55.01,

of which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 % of the EXW of the product;

or

Non-woven fabric formation alone in the case of felt made from natural fibres
–Others:
Extrusion of man-made fibres combined with fabric formation;

or

Non-woven fabric formation alone in the case of other felt made from natural fibres
5603.11-5603.14Production from

—directionally or randomly oriented filaments; or

—substances or polymers of natural or man-made origin;

followed in both cases by bonding into a nonwoven
5603.91-5603.94Production from

—directionally or randomly oriented staple fibres; or

—chopped yarns, of natural or man-made origin;

followed in both cases by bonding into a nonwoven
5604.10Production from rubber thread or cord, not textile covered
5604.90Spinning of natural fibres;

Extrusion of man-made fibres combined with spinning;

or

Twisting combined with any mechanical operation
56.05Spinning of natural or man-made staple fibres;

Extrusion of man-made fibres combined with spinning;

or

Twisting combined with any mechanical operation
56.06Extrusion of man-made fibres combined with spinning;

Twisting combined with gimping;

Spinning of natural or man-made staple fibres;

or

Flocking combined with dyeing
56.07-56.09Spinning of natural fibres;

or

Extrusion of man-made fibres combined with spinning
Chapter 57Carpets and other textile floor coverings

Chapter note: For products of this Chapter non-originating jute fabric may be used as a backing
57.01-57.05Spinning of natural or man-made staple fibres combined with weaving or with tufting;

Extrusion of man-made filament yarn combined with weaving or with tufting;

Production from coir yarn or sisal yarn or jute yarn or classical ring spun viscose yarn;

Tufting combined with dyeing or with printing;

Tufting or weaving of man-made filament yarn combined with coating or with laminating;

Flocking combined with dyeing or with printing;

or

Extrusion of man-made fibres combined with nonwoven techniques including needle punching
Chapter 58Special woven fabrics; tufted textile fabrics; lace; tapestries; trimmings; embroidery
58.01-58.04Spinning of natural or man-made staple fibres combined with weaving or with tufting;

Extrusion of man-made filament yarn combined with weaving or with tufting;

Weaving combined with dyeing or with flocking or with coating or with laminating or with metalizing;

Tufting combined with dyeing or with printing;

Flocking combined with dyeing or with printing;

Yarn dyeing combined with weaving;

Weaving combined with printing;

or

Printing (as standalone operation)
58.05CTH
58.06-58.09Spinning of natural or man-made staple fibres combined with weaving or with tufting;

Extrusion of man-made filament yarn combined with weaving or with tufting;

Weaving combined with dyeing or with flocking or with coating or with laminating or with metalizing;

Tufting combined with dyeing or with printing;

Flocking combined with dyeing or with printing;

Yarn dyeing combined with weaving;

Weaving combined with printing;

or

Printing (as standalone operation)
58.10Embroidering in which the value of non-originating materials of any heading, except that of the product, used does not exceed 50 % of the EXW of the product
58.11Spinning of natural or man-made staple fibres combined with weaving or with tufting;

Extrusion of man-made filament yarn combined with weaving or with tufting;

Weaving combined with dyeing or with flocking or with coating or with laminating or with metalizing;

Tufting combined with dyeing or with printing;

Flocking combined with dyeing or with printing;

Yarn dyeing combined with weaving;

Weaving combined with printing;

or

Printing (as standalone operation)
Chapter 59Impregnated, coated, covered or laminated textile fabrics; textile articles of a kind suitable for industrial use
59.01Weaving combined with dyeing or with flocking or with coating or with laminating or with metalising;

or

Flocking combined with dyeing or with printing
59.02
–Containing not more than 90 % by weight of textile materials:
Weaving
–Others:
Extrusion of man-made fibres combined with weaving
59.03Weaving, knitting or crocheting combined with impregnating or with coating or with covering or with laminating or with metalising;

Weaving combined with printing; or

Printing (as standalone operation)
59.04Calendaring combined with dyeing, coating, laminating or metalizing. Non-originating jute fabric may be used as a backing;

or

Weaving combined with dyeing or with coating or with laminating or with metalising. Non-originating jute fabric may be used as a backing
59.05
–Impregnated, coated, covered or laminated with rubber, plastics or other materials:
Weaving, knitting or non-woven fabric formation combined with impregnating or with coating or with covering or with laminating or with metalising
–Others:
Spinning of natural or man-made staple fibres combined with weaving;

Extrusion of man-made filament yarn combined with weaving;

Weaving, knitting or nonwoven fabric formation combined with dyeing or with coating or with laminating;

Weaving combined with printing;

or

Printing (as standalone operation)
59.06
–Knitted or crocheted fabrics:
Spinning of natural or man-made staple fibres combined with knitting or with crocheting;

Extrusion of man-made filament yarn combined with knitting or with crocheting;

Knitting or crocheting combined with rubberising; or

Rubberising combined with at least two other main preparatory or finishing operations (such as calendering, shrink-resistance processes, heat setting, permanent finishing) provided that the value of non-originating materials used does not exceed 50 % of the EXW of the product
–Other fabrics made of synthetic filament yarn, containing more than 90 % by weight of textile materials:
Extrusion of man-made fibres combined with weaving
–Others:
Weaving, knitting or nonwoven process combined with dyeing or with coating or with rubberising;

Yarn dyeing combined with weaving, knitting or nonwoven process;

or

Rubberising combined with at least two other main preparatory or finishing operations (such as calendering, shrink-resistance processes, heat setting, permanent finishing) provided that the value of non-originating materials used does not exceed 50 % of the EXW of the product
59.07Weaving, knitting or nonwoven fabric formation combined with dyeing or with printing or with coating or with impregnating or with covering;

Flocking combined with dyeing or with printing;

or

Printing (as standalone operation)
59.08
–Incandescent gas mantles, impregnated:
Production from tubular knitted or crocheted gas-mantle fabric
–Others:
CTH
59.09-59.11Spinning of natural or of man-made staple fibres combined with weaving;

Extrusion of man-made fibres combined with weaving;

Weaving combined with dyeing or with coating or with laminating;

or

Coating, flocking, laminating or metalizing combined with at least two other main preparatory or finishing operations (such as calendering, shrink-resistance processes, heat setting, permanent finishing) provided that the value of non-originating materials used does not exceed 50 % of the EXW of the product
Chapter 60Knitted or crocheted fabrics
60.01-60.06Spinning of natural or man-made staple fibres combined with knitting or with crocheting;

Extrusion of man-made filament yarn combined with knitting or with crocheting;

Knitting or crocheting combined with dyeing or with flocking or with coating or with laminating or with printing;

Flocking combined with dyeing or with printing;

Yarn dyeing combined with knitting or with crocheting; or

Twisting or texturing combined with knitting or with crocheting provided that the value of non-originating non-twisted or non-textured yarns used does not exceed 50 % of the EXW of the product
Chapter 61Articles of apparel and clothing accessories, knitted or crocheted
61.01-61.17
–Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form:
Knitting or crocheting combined with making-up including cutting of fabric
–Others:
Spinning of natural or man-made staple fibres combined with knitting or with crocheting;

Extrusion of man-made filament yarn combined with knitting or with crocheting; or

Knitting and making-up in one operation
Chapter 62Articles of apparel and clothing accessories, not knitted or crocheted
62.01Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.02
–Embroidered:
Weaving combined with making-up including cutting of fabric;

or

Production from unembroidered fabric, provided that the value of non-originating unembroidered fabric used does not exceed 40 % of the EXW of the product
–Others:
Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.03Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.04
–Embroidered:
Weaving combined with making-up including cutting of fabric;

or

Production from unembroidered fabric, provided that the value of non-originating unembroidered fabric used does not exceed 40 % of the EXW of the product
–Others:
Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.05Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.06
–Embroidered:
Weaving combined with making-up including cutting of fabric;

or

Production from unembroidered fabric, provided that the value of non-originating unembroidered fabric used does not exceed 40 % of the EXW of the product
–Others:
Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.07-62.08Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.09
–Embroidered:
Weaving combined with making-up including cutting of fabric;

or

Production from unembroidered fabric, provided that the value of non-originating unembroidered fabric used does not exceed 40 % of the EXW of the product
–Others:
Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.10
–Fire-resistant equipment of fabric covered with foil of aluminised polyester:
Weaving combined with making-up including cutting of fabric;

or

Coating or laminating combined with making-up including cutting of fabric, provided that the value of non-originating uncoated or unlaminated fabric used does not exceed 40 % of the EXW of the product
–Others:
Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.11
–Women’s, or girls’ garments, embroidered:
Weaving combined with making-up including cutting of fabric;

or

Production from unembroidered fabric, provided that the value of non-originating unembroidered fabric used does not exceed 40 % of the EXW of the product
–Others:
Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.12
–Knitted or crocheted obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form:
Knitting combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
–Others:
Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.13-62.14
–Embroidered:
Weaving combined with making-up including cutting of fabric;

Production from unembroidered fabric, provided that the value of non-originating unembroidered fabric used does not exceed 40 % of the EXW of the product;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
–Others:
Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.15Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.16
–Fire-resistant equipment of fabric covered with foil of aluminised polyester:
Weaving combined with making-up including cutting of fabric;

or

Coating or laminating combined with making-up including cutting of fabric, provided that the value of non-originating uncoated or unlaminated fabric used does not exceed 40 % of the EXW of the product
–Others:
Weaving combined with making-up including cutting of fabric;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
62.17
–Embroidered:
Weaving combined with making-up including cutting of fabric;

Production from unembroidered fabric, provided that the value of non-originating unembroidered fabric used does not exceed 40 % of the EXW of the product;

or

Making-up including cutting of fabric preceded by printing (as standalone operation)
–Fire-resistant equipment of fabric covered with foil of aluminised polyester:
Weaving combined with making-up including cutting of fabric;

or

Coating or laminating combined with making-up including cutting of fabric, provided that the value of non-originating uncoated or unlaminated fabric used does not exceed 40 % of the EXW of the product
–Interlinings for collars and cuffs, cut out:
CTH, provided that the value of all the non-originating materials used does not exceed 40 % of the EXW of the product
–Others:
Weaving combined with making-up including cutting of fabric
Chapter 63Other made up textile articles; sets; worn clothing and worn textile articles; rags
63.01-63.04
–Of felt, of nonwovens:
Nonwoven fabric formation combined with making-up including cutting of fabric
–Others:
– –Embroidered:
Weaving or knitting or crocheting combined with making-up including cutting of fabric;

or

Production from unembroidered fabric (other than knitted or crocheted), provided that the value of non-originating unembroidered fabric used does not exceed 40 % of the EXW of the product
– –Others:
Weaving, knitting or crocheting combined with making-up including cutting of fabric
63.05Extrusion of man-made fibres or spinning of natural or man-made staple fibres, combined with weaving or with knitting and making-up including cutting of fabric
63.06
–Of nonwovens:
Nonwoven fabric formation combined with making-up including cutting of fabric
–Others:
Weaving combined with making-up including cutting of fabric
63.07MaxNOM 40 % (EXW)
63.08Each item in the set must satisfy the rule which would apply to it if it were not included in the set; however, non-originating articles may be incorporated, provided that their total value does not exceed 15 % of the EXW of the set
63.09-63.10CTH
SECTION XIIFOOTWEAR, HEADGEAR, UMBRELLAS, SUN UMBRELLAS, WALKING-STICKS, SEAT-STICKS, WHIPS, RIDING-CROPS AND PARTS THEREOF; PREPARED FEATHERS AND ARTICLES MADE THEREWITH; ARTIFICIAL FLOWERS; ARTICLE OF HUMAN HAIR
Chapter 64Footwear, gaiters and the like; parts of such articles
64.01-64.05Production from non-originating materials of any heading, except from non-originating assemblies of uppers affixed to inner soles or to other sole components of heading 64.06
64.06CTH
Chapter 65Headgear and parts thereof
65.01-65.07CTH
Chapter 66Umbrellas, sun umbrellas, walking-sticks, seat-sticks, whips, riding-crops and parts thereof
66.01-66.03CTH;

or

MaxNOM 50 % (EXW)
Chapter 67Prepared feathers and down and articles made of feathers or of down; artificial flowers; articles of human hair
67.01-67.04CTH
SECTION XIIIARTICLES OF STONE, PLASTER, CEMENT, ASBESTOS, MICA OR SIMILAR MATERIALS; CERAMIC PRODUCTS; GLASS AND GLASSWARE
Chapter 68Articles of stone, plaster, cement, asbestos, mica or similar materials
68.01-68.15CTH;

or

MaxNOM 70 % (EXW)
Chapter 69Ceramic products
69.01-69.14CTH
Chapter 70Glass and glassware
70.01-70.09CTH;

or

MaxNOM 50 % (EXW)
70.10CTH
70.11CTH;

or

MaxNOM 50 % (EXW)
70.13CTH except from non-originating materials of heading 70.10
70.14-70.20CTH;

or

MaxNOM 50 % (EXW)
SECTION XIVNATURAL OR CULTURED PEARLS, PRECIOUS OR SEMI-PRECIOUS STONES, PRECIOUS METALS, METALS CLAD WITH PRECIOUS METAL, AND ARTICLES THEREOF; IMITATION JEWELLERY; COIN
Chapter 71Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin
71.01-71.05Production from non-originating materials of any heading
71.06
–Unwrought:
CTH except from non-originating materials of headings 71.06, 71.08 and 71.10;

Electrolytic, thermal or chemical separation of non-originating precious metals of headings 71.06, 71.08 and 71.10;

or

Fusion or alloying of non-originating precious metals of headings 71.06, 71.08 and 71.10 with each other or with base metals or purification
–Semi-manufactured or in powder form:
Production from non-originating unwrought precious metals
71.07Production from non-originating materials of any heading
71.08
–Unwrought:
CTH except from non-originating materials of headings 71.06, 71.08 and 71.10;

Electrolytic, thermal or chemical separation of non-originating precious metals of headings 71.06, 71.08 and 71.10;

or

Fusion or alloying of non-originating precious metals of headings 71.06, 71.08 and 71.10 with each other or with base metals or purification
–Semi-manufactured or in powder form:
Production from non-originating unwrought precious metals
71.09Production from non-originating materials of any heading
71.10
–Unwrought:
CTH except from non-originating materials of headings 71.06, 71.08 and 71.10;

Electrolytic, thermal or chemical separation of non-originating precious metals of headings 71.06, 71.08 and 71.10;

or

Fusion or alloying of non-originating precious metals of headings 71.06, 71.08 and 71.10 with each other or with base metals or purification
–Semi-manufactured or in powder form:
Production from non-originating unwrought precious metals
71.11Production from non-originating materials of any heading
71.12-71.18CTH
SECTION XVBASE METALS AND ARTICLES OF BASE METAL
Chapter 72Iron and Steel
72.01-72.06CTH
72.07CTH except from non-originating materials of heading 72.06
72.08-72.17CTH except from non-originating materials of headings 72.08 to 72.17
72.18CTH
72.19-72.23CTH except from non-originating materials of headings 72.19 to 72.23
72.24CTH
72.25-72.29CTH except from non-originating materials of headings 72.25 to 72.29
Chapter 73Articles of iron or steel
7301.10CC except from non-originating materials of headings 72.08 to 72.17
7301.20CTH
73.02CC except from non-originating materials of headings 72.08 to 72.17
73.03CTH
73.04-73.06CC except from non-originating materials of headings 72.13 to 72.17, 72.21 to 72.23 and 72.25 to 72.29
73.07
–Tube or pipe fittings of stainless steel:
CTH except from non-originating forged blanks; however, non-originating forged blanks may be used provided that their value does not exceed 50 % of the EXW of the product
–Others:
CTH
73.08CTH except from non-originating materials of subheading 7301.20
7309.00-7315.19CTH
7315.20CTH;

or

MaxNOM 50 % (EXW)
7315.81-7326.90CTH
Chapter 74Copper and articles thereof
74.01-74.02CTH
74.03Production from non-originating materials of any heading
74.04-74.07CTH
74.08CTH and MaxNOM 50 % (EXW)
74.09-74.19CTH
Chapter 75Nickel and articles thereof
75.01CTH
75.02Production from non-originating materials of any heading
75.03-75.08CTH
Chapter 76Aluminium and articles thereof
76.01CTH and MaxNOM 50 % (EXW);

or

Thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
76.02CTH
76.03-76.16CTH and MaxNOM 50 % (EXW) (3)
Chapter 78Lead and articles thereof
7801.10Production from non-originating materials of any heading
7801.91-7806.00CTH
Chapter 79Zinc and articles thereof
79.01-79.07CTH
Chapter 80Tin and articles thereof
80.01-80.07CTH
Chapter 81Other base metals; cermets; articles thereof
81.01-81.13Production from non-originating materials of any heading
Chapter 82Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
8201.10-8205.70CTH;

or

MaxNOM 50 % (EXW)
8205.90CTH, however, non-originating tools of heading 82.05 may be incorporated into the set, provided that their total value does not exceed 15 % of the EXW of the set
82.06CTH except from non-originating materials of headings 82.02 to 82.05; however, non-originating tools of headings 82.02 to 82.05 may be incorporated into the set, provided that their total value does not exceed 15 % of the EXW of the set
82.07-82.15CTH;

or

MaxNOM 50 % (EXW)
Chapter 83Miscellaneous articles of base metal
83.01-83.11CTH;

or

MaxNOM 50 % (EXW)
SECTION XVIMACHINERY AND MECHANICAL APPLIANCE; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
Chapter 84Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
84.01-84.06CTH;

or

MaxNOM 50 % (EXW)
84.07-84.08MaxNOM 50 % (EXW)
84.09-84.12CTH;

or

MaxNOM 50 % (EXW)
8413.11-8415.10CTSH;

or

MaxNOM 50 % (EXW)
8415.20CTH;

or

MaxNOM 50 % (EXW)
8415.81-8415.90CTSH;

or

MaxNOM 50 % (EXW)
84.16-84.20CTH;

or

MaxNOM 50 % (EXW)
84.21CTSH;

or

MaxNOM 50 % (EXW)
84.22-84.24CTH;

or

MaxNOM 50 % (EXW).
84.25-84.30CTH except from non-originating materials of heading 84.31;

or

MaxNOM 50 % (EXW)
84.31-84.43CTH;

or

MaxNOM 50 % (EXW)
84.44-84.47CTH except from non-originating materials of heading 84.48;

or

MaxNOM 50 % (EXW)
84.48-84.55CTH;

or

MaxNOM 50 % (EXW)
84.56-84.65CTH except from non-originating materials of heading 84.66;

or

MaxNOM 50 % (EXW)
84.66-84.68CTH;

or

MaxNOM 50 % (EXW)
84.70-84.72CTH except from non-originating materials of heading 84.73;

or

MaxNOM 50 % (EXW)
84.73-84.78CTH;

or

MaxNOM 50 % (EXW)
8479.10CTSH;

or

MaxNOM 50 % (EXW)
8479.20
–Machinery for the extraction or preparation of microbial fats and oils
CTH

or

MaxNOM 50 % (EXW)
–Others
CTSH;

or

MaxNOM 50 % (EXW)
8479.30-8479.40CTSH;

or

MaxNOM 50 % (EXW)
8479.50CTH;

or

MaxNOM 50 % (EXW)
8479.60-8479.83CTSH;

or

MaxNOM 50 % (EXW)
8479.89CTH;

or

MaxNOM 50 % (EXW)
8479.90CTSH;

or

MaxNOM 50 % (EXW)
84.80CTH;

or

MaxNOM 50 % (EXW)
84.81CTSH;

or

MaxNOM 50 % (EXW)
84.82-84.87CTH;

or

MaxNOM 50 % (EXW)
Chapter 85Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
85.01-85.02CTH except from non-originating materials of heading 85.03;

or

MaxNOM 50 % (EXW)
85.03-85.06CTH;

or

MaxNOM 50 % (EXW)
85.07
–Accumulators containing one or more battery cells or battery modules and the circuitry to interconnect them amongst themselves,

often referred to as “battery packs”, of a kind used as the primary source of electrical power for propulsion of vehicles of headings 87.02, 87.03 and 87.04
CTH except from non-originating active cathode materials;

or

MaxNOM 30 % (EXW) (4)
–Battery cells, battery modules and parts thereof, intended to be incorporated into an electric accumulator of a kind used as the primary source of electrical power for propulsion of vehicles of headings 87.02, 87.03 and 87.04
CTH except from non-originating active cathode materials;

or

MaxNOM 35 % (EXW) (5)
–Others
CTH;

or

MaxNOM 50 % (EXW)
85.08-85.18CTH;

or

MaxNOM 50 % (EXW)
85.19-85.21CTH except from non-originating materials of heading 85.22;

or

MaxNOM 50 % (EXW)
85.22-85.24CTH;

or

MaxNOM 50 % (EXW)
85.25-85.27CTH except from non-originating materials of heading 85.29;

or

MaxNOM 50 % (EXW)
85.28-85.34CTH;

or

MaxNOM 50 % (EXW)
85.35-85.37CTH except from non-originating materials of heading 85.38;

or

MaxNOM 50 % (EXW)
8538.10-8541.90CTH;

or

MaxNOM 50 % (EXW)
8542.31-8542.39CTH;

Non-originating materials undergo a diffusion;

or

MaxNOM 50 % (EXW)
8542.90-8543.90CTH;

or

MaxNOM 50 % (EXW)
85.44-85.49MaxNOM 50 % (EXW)
SECTION XVIIVEHICLES, AIRCRAFT, VESSELS AND ASSOCIATED TRANSPORT EQUIPMENT
Chapter 86Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds
86.01-86.09CTH except from non-originating materials of heading 86.07;

or

MaxNOM 50 % (EXW)
Chapter 87Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof
87.01MaxNOM 45 % (EXW)
87.02-87.04
–vehicles with both internal combustion piston engine and electric motor as motors for propulsion capable of being charged by plugging to external source of electric power (“plug-in hybrid”);

–vehicles with only electric motor for propulsion
MaxNOM 45 % (EXW) and battery packs of heading 85.07 of a kind used as the primary source of electrical power for propulsion of the vehicle must be originating (6)
–others
MaxNOM 45 % (EXW) (7)
87.05-87.07MaxNOM 45 % (EXW)
87.08-87.11CTH;

or

MaxNOM 50 % (EXW)
87.12MaxNOM 45 % (EXW)
87.13-87.16CTH;

or

MaxNOM 50 % (EXW)
Chapter 88Aircraft, spacecraft, and parts thereof
88.01-88.07CTH;

or

MaxNOM 50 % (EXW)
Chapter 89Ships, boats and floating structures
89.01-89.08CC;

or

MaxNOM 40 % (EXW)
SECTION XVIIIOPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; CLOCKS AND WATCHES; MUSICAL INSTRUMENTS; PARTS AND ACCESSORIES THEREOF
Chapter 90Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof
9001.10-90.01.40CTH;

or

MaxNOM 50 % (EXW)
9001.50CTH;

Surfacing of the semi-finished lens into a finished ophthalmic lens with optical corrective power meant to be mounted on a pair of spectacles;

Coating of the lens through appropriated treatments to improve vision and ensure protection of the wearer;

or

MaxNOM 50 % (EXW)
9001.90-9033.00CTH;

or

MaxNOM 50 % (EXW)
Chapter 91Clocks and watches and parts thereof
91.01-91.14CTH;

or

MaxNOM 50 % (EXW)
Chapter 92Musical instruments; parts and accessories of such articles
92.01-92.09MaxNOM 50 % (EXW)
SECTION XIXARMS AND AMMUNITION; PARTS AND ACCESSORIES THEREOF
Chapter 93Arms and ammunition; parts and accessories thereof
93.01-93.07MaxNOM 50 % (EXW)
SECTION XXMISCELLANEOUS MANUFACTURED ARTICLES
Chapter 94Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings
94.01-94.06CTH;

or

MaxNOM 50 % (EXW)
Chapter 95Toys, games and sports requisites; parts and accessories thereof
95.03-95.08CTH;

or

MaxNOM 50 % (EXW)
Chapter 96Miscellaneous manufactured articles
96.01-96.04CTH;

or

MaxNOM 50 % (EXW)
96.05Each item in the set shall satisfy the rule which would apply to it if it were not included in the set, provided that non-originating articles may be incorporated, provided that their total value does not exceed 15 % of the EXW of the set
96.06-9608.40CTH;

or

MaxNOM 50 % (EXW)
96.08.50Each item in the set shall satisfy the rule which would apply to it if it were not included in the set, provided that non-originating articles may be incorporated, provided that their total value does not exceed 15 % of the EXW of the set
96.08.60-96.20CTH;

or

MaxNOM 50 % (EXW)
SECTION XXIWORKS OF ART, COLLECTORS’ PIECES AND ANTIQUES
Chapter 97Works of Art, Collectors’ Pieces and Antiques
97.01-97.06CTH

’.


(1) Prepared or preserved tunas, skipjack and bonito (Sarda spp.), whole or in pieces (excl. minced) classified under subheading 1604.14 may be considered as originating under alternative product-specific rules of origin within annual quotas as specified in Annex 4.

(2) Prepared or preserved tunas, skipjack or other fish of genus Euthynnus (excl. whole or in pieces) classified under subheading 1604.20 may be considered as originating under alternative product-specific rules of origin within annual quotas as specified in Annex 4.

(3) Certain aluminium products may be considered as originating under alternative product-specific rules of origin with annual quotas as specified in Annex 4.

(4) For the period from the entry into force of this Agreement until 31 December 2026 alternative product-specific rules of origin apply, as specified in Annex 5.

(5) For the period from the entry into force of this Agreement until 31 December 2026 alternative product-specific rules of origin apply, as specified in Annex 5.

(6) For the period from the entry into force of this Agreement until 31 December 2026 alternative product-specific rules of origin apply, as specified in Annex 5.

(7) For hybrid vehicles with both internal combustion engine and electric motor as motors for propulsion, other than those capable of being charged by plugging to external source of electric power, alternative product-specific rules of origin apply for the period from the entry into force of this Agreement until 31 December 2026, as specified in Annex 5.


ELI: http://data.europa.eu/eli/dec/2024/2606/oj

ISSN 1977-0677 (electronic edition)