Considerations on COM(2021)254 - Amendment of Regulation (EU) 2016/1628 as regards the transitional provisions of certain machinery fitted with engines in the power range between 56kW and 130kW, and above 300kW in order to address the impact of COVID-19 crisis - Main contents
Please note
This page contains a limited version of this dossier in the EU Monitor.
| dossier | COM(2021)254 - Amendment of Regulation (EU) 2016/1628 as regards the transitional provisions of certain machinery fitted with engines in ... |
|---|---|
| document | COM(2021)254  |
| date | June 24, 2021 |
| (2) | The dates applicable to the new emission limit values, referred to as ‘Stage V’ in Regulation (EU) 2016/1628, are set out in order to provide manufacturers with clear and comprehensive information and an appropriate period of time for the transition to Stage V, whilst at the same time substantially reducing the administrative burden for approval authorities. |
| (3) | Due to the COVID-19 outbreak and the associated supply chain and production disruptions, non-road mobile machinery manufacturers, referred to as ‘original equipment manufacturers’ or ‘OEMs’ in Regulation (EU) 2016/1628, had difficulties meeting the deadlines of 30 June 2020 and 31 December 2020 set out in that Regulation for the production and the placing on the market of machinery fitted with certain categories of engines that comply with less stringent emission limit values than those of Stage V. Therefore, Regulation (EU) 2016/1628 was amended by Regulation (EU) 2020/1040 of the European Parliament and of the Council (4) in order to prolong those deadlines by 12 months. |
| (4) | Since the continued supply chain and production disruptions caused by the COVID-19 pandemic still lead to delays in the production and the placing on the market of machinery fitted with other categories of engines (namely, engines in the power ranges greater than or equal to 56 kW and less than 130 kW, and greater than or equal to 300 kW) that comply with less stringent emission limit values than those of Stage V, it is very likely that OEMs will not be able to meet the deadlines of 30 June 2021 and 31 December 2021 set out in Regulation (EU) 2016/1628 for the production and the placing on the market of the machinery fitted with those engines without those manufacturers sustaining serious economic damage. |
| (5) | Given the current circumstances, and in order to ensure the smooth functioning of the internal market, to provide legal certainty and to avoid potential market disruption, it is necessary to prolong the transitional provisions of Regulation (EU) 2016/1628 for those categories of engines. |
| (6) | Given that the prolongation of the transitional provisions will have no environmental impact, as the transition engines concerned have already been produced, the extension of the relevant periods should be six months for the production of the machinery fitted with those engines and nine months for the placing on the market of the machinery fitted with those engines. |
| (7) | Since the objective of this Regulation, namely to prolong certain transitional provisions of Regulation (EU) 2016/1628, cannot be sufficiently achieved by the Member States but can rather, by reason of its scale and effects, be better achieved at Union level, the Union may adopt measures, in accordance with the principle of subsidiarity as set out in Article 5 of the Treaty on European Union (‘TEU’). In accordance with the principle of proportionality as set out in that Article, this Regulation does not go beyond what is necessary in order to achieve that objective. |
| (8) | In view of the urgency entailed by the exceptional circumstances caused by the COVID-19 pandemic, it is considered to be appropriate to provide for an exception to the eight-week period referred to in Article 4 of Protocol No 1 on the role of national Parliaments in the European Union, annexed to the TEU, to the Treaty on the Functioning of the European Union and to the Treaty establishing the European Atomic Energy Community. |
| (9) | Regulation (EU) 2016/1628 should therefore be amended accordingly. |
| (10) | In view of the fact that the transition period provided for in Regulation (EU) 2016/1628 for certain engine sub-categories is to expire on 31 December 2021 and that OEMs have until 30 June 2021 to produce non-road mobile machinery fitted with transition engines of those sub-categories, this Regulation should enter into force as a matter of urgency on the day of its publication in the Official Journal of the European Union, |