COM(2012)108 - Conclusion of the Agreement with the Government of the USA on the coordination of energy-efficiency labelling programmes for office equipment

Please note

This page contains a limited version of this dossier in the EU Monitor.

Contents

  1. Key information
  2. Key dates
  3. Related information
  4. Resulting legislation
  5. Full version
  6. EU Monitor

1.

Key information

official title

Proposal for a COUNCIL DECISION on the conclusion of the Agreement between the Government of the United States of America and the European Union on the coordination of energy-efficiency labelling programmes for office equipment
 
Legal instrument Decision
Decision making procedure non-legislative procedure;Non legislative enactments (NLE)
reference by COM-number49 COM(2012)108 EN
Additional COM-numbers COM(2012)108
procedure number51 2012/0048(NLE)
CELEX number52 52012PC0108

2.

Key dates

Document 15-03-2012
Online publication 15-03-2012
Decision 13-11-2012; Besluit 2013/107
Publication in Official Journal53 06-03-2013; OJ L 63, 6.3.2013,Special edition in Croatian: Chapter 11 Volume 117

3.

Related information

4.

Resulting legislation

 

5.

Full version

This page is also available in a full version containing the latest state of affairs, the summary of the European Parliament Legislative Observatory, the legal context, other dossiers related to the dossier at hand, the stakeholders involved (e.g. European Commission directorates-general, European Parliament committees, Council configurations and even individual EU Commissioners and Members of the European Parliament), consultations relevant to the dossier at hand and finally documents of the European Parliament, the Council of Ministers and the European Commission.

The full version is available for registered users of the EU Monitor by ANP and PDC Informatie Architectuur.

6.

EU Monitor

The EU Monitor enables its users to keep track of the European process of lawmaking, focusing on the relevant dossiers. It automatically signals developments in your chosen topics of interest. Apologies to unregistered users, we can no longer add new users.This service will discontinue in the near future.

  • 1. 
    Using the three bar video signal (Lt) static test image referenced in section 11
     
  • 2. 
    Report in OPS the measured luminance value in candelas per square meter (cd
     
  • 3. 
    All luminance measurements should be performed in accordance with the test conditions outlined above for large displays
     
  • 4. 
    Reporting results
     
  • 5. 
    Testing of displays with Automatic Brightness Control
     
  • 6. 
    Set the proper display mode (Refer to Product Test Setup, Section G, Resolution and Refresh Rate)
     
  • 7. 
    Set the power meter current range
     
  • 8. 
    The following alternate test procedure is used to calculate maximum On Mode power consumption for displays shipped with Automatic Brightness Control enabled by default
     
  • 9. 
    Record power consumption and total pixel format (horizontal x vertical pixels displayed), to calculate pixels
     
  • 10. 
    Using the three bar video signal (Lt) static test image referenced in section 11
     
  • 11. 
    Set the power meter current range
     
  • 12. 
    Reporting results
     
  • 13. 
    Using the three bar video signal (Lt) static test image referenced in section 11
     
  • 14. 
    Report in OPS the measured luminance value in candelas per square meter (cd
     
  • 15. 
    Reporting results
     
  • 16. 
    Report in OPS the measured luminance value in candelas per square meter (cd
     
  • 17. 
    Using the three bar video signal (Lt) static test image referenced in section 11
     
  • 18. 
    Report in OPS the measured luminance value in candelas per square meter (cd
     
  • 19. 
    All luminance measurements should be performed in accordance with the test conditions outlined above for large displays
     
  • 20. 
    Using the three bar video signal (Lt) static test image referenced in section 11
     
  • 21. 
    Report in OPS the measured luminance value in candelas per square meter (cd
     
  • 22. 
    exceeds the ENERGY STAR specification
     
  • 23. 
    Allow the readings on the power meter to stabilize and then take the true power reading in watts from the power meter
     
  • 24. 
    exceeds the ENERGY STAR specification
     
  • 25. 
    Using the three bar video signal (Lt) static test image referenced in section 11
     
  • 26. 
    Report in OPS the measured luminance value in candelas per square meter (cd
     
  • 27. 
    All luminance measurements should be performed in accordance with the test conditions outlined above for large displays
     
  • 28. 
    Reporting results
     
  • 29. 
    Testing of displays with Automatic Brightness Control
     
  • 30. 
    Set the proper display mode (Refer to Product Test Setup, Section G, Resolution and Refresh Rate)
     
  • 31. 
    Set the power meter current range
     
  • 32. 
    The following alternate test procedure is used to calculate maximum On Mode power consumption for displays shipped with Automatic Brightness Control enabled by default
     
  • 33. 
    Record power consumption and total pixel format (horizontal x vertical pixels displayed), to calculate pixels
     
  • 34. 
    Using the three bar video signal (Lt) static test image referenced in section 11
     
  • 35. 
    Set the power meter current range
     
  • 36. 
    Reporting results
     
  • 37. 
    Using the three bar video signal (Lt) static test image referenced in section 11
     
  • 38. 
    Report in OPS the measured luminance value in candelas per square meter (cd
     
  • 39. 
    Reporting results
     
  • 40. 
    Report in OPS the measured luminance value in candelas per square meter (cd
     
  • 41. 
    Using the three bar video signal (Lt) static test image referenced in section 11
     
  • 42. 
    Report in OPS the measured luminance value in candelas per square meter (cd
     
  • 43. 
    All luminance measurements should be performed in accordance with the test conditions outlined above for large displays
     
  • 44. 
    Using the three bar video signal (Lt) static test image referenced in section 11
     
  • 45. 
    Report in OPS the measured luminance value in candelas per square meter (cd
     
  • 46. 
    exceeds the ENERGY STAR specification
     
  • 47. 
    Allow the readings on the power meter to stabilize and then take the true power reading in watts from the power meter
     
  • 48. 
    exceeds the ENERGY STAR specification
     
  • 49. 
    De Europese Commissie kent nummers toe aan officiële documenten van de Europese Unie. De Commissie maakt onderscheid in een aantal typen documenten door middel van het toekennen van verschillende nummerseries. Het onderscheid is gebaseerd op het soort document en/of de instelling van de Unie van wie het document afkomstig is.
     
  • 50. 
    De Raad van de Europese Unie kent aan wetgevingsdossiers een uniek toe. Dit nummer bestaat uit een vijfcijferig volgnummer gevolgd door een schuine streep met de laatste twee cijfers van het jaartal, bijvoorbeeld 12345/00 - een document met nummer 12345 uit het jaar 2000.
     
  • 51. 
    Het interinstitutionele nummer is een nummerreeks die binnen de Europese Unie toegekend wordt aan voorstellen voor regelgeving van de Europese Commissie.
    Binnen de Europese Unie worden nog een aantal andere nummerseries gebruikt. Iedere instelling heeft één of meerdere sets documenten met ieder een eigen nummering. Die reeksen komen niet overeen met elkaar of het interinstitutioneel nummer.
     
  • 52. 
    Deze databank van de Europese Unie biedt de mogelijkheid de actuele werkzaamheden (workflow) van de Europese instellingen (Europees Parlement, Raad, ESC, Comité van de Regio's, Europese Centrale Bank, Hof van Justitie enz.) te volgen. EURlex volgt alle voorstellen (zoals wetgevende en begrotingsdossiers) en mededelingen van de Commissie, vanaf het moment dat ze aan de Raad of het Europees Parlement worden voorgelegd.
     
  • 53. 
    Als dag van bekendmaking van een Europees besluit geldt de dag waarop het besluit in het Publicatieblad wordt bekendgemaakt, en daardoor in alle officiële talen van de Europese Unie bij het Publicatiebureau beschikbaar is.