Proposal for a Council Regulation suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products - Main contents
Contents
| Document date | 05-12-2011 |
|---|---|
| Publication date | 07-12-2011 |
| Reference | 18133/11 |
| From | Commission |
| External link | original PDF |
| Original document in PDF |  |
COUNCIL OF Brussels, 5 December 2011
THE EUROPEAN UNION
18133/11
Interinstitutional File:
2011/0408 (NLE)
TDC 29
PROPOSAL from: Commission dated: 5 December 2011 No Cion doc.: COM(2011) 850 final i Subject: Proposal for a Council Regulation suspending the autonomous Common
Customs Tariff duties on certain agricultural, fishery and industrial products
Delegations will find attached a proposal from the Commission, submitted under a covering letter from Mr Jordi AYET PUIGARNAU, Director, to Mr Uwe CORSEPIUS, Secretary-General of the Council of the European Union.
________________________
Encl.: COM(2011) 850 final i
EUROPEAN COMMISSION
Brussels, 5.12.2011 COM(2011) 850 final i 2011/0408 (NLE)
Proposal for a
COUNCIL REGULATION
suspending the autonomous Common Customs Tariff duties on certain agricultural,
fishery and industrial products
EXPLANATORY MEMORANDUM
1. CONTEXT OF THE PROPOSAL
The Commission decided to propose a new base regulation on autonomous tariff suspensions.
This became necessary as Council Regulation (EC) 1255/96 i of 27 June 1996 1 has been
amended 30 times and corrected thrice. Therefore, in the interests of transparency, it is proposed to repeal the said Regulation and replace it by the current proposal. The production in the Union of the products specified in this regulation does not exist or is inadequate and, therefore, by allowing enterprises to obtain supplies at a lower cost for a certain period, it would become possible to stimulate economic activity within the Union, to improve the competitive capacity of these enterprises and, in particular, to enable the latter to maintain or create employment, modernise their structures, etc. In this context, it should be pointed out that goods imported under the tariff suspension arrangements enjoy freedom of movement throughout the Union; consequently, once a tarif suspension is granted, any operator in any Member State is eligible to benefit from it. Since autonomous tariff suspensions constitute an exception to the general rule represented by the Common Customs Tariff, they must, like all derogations, surveilled and reviewed systematically on a regular basis (at least every five years). This should not exclude the termination of certain measures earlier if it is no longer in the Union's interest to maintain suspension of autonomous Common Customs Tariff duties or because of technical product developments and economic trends on the market justify it or changed circumstances. The Annex in the attached proposal consists of products which have been published already by Council Regulation (EC) No 1255/96 i as last amended by Regulation (EC) No 631/2011 i as well as a number of agricultural and industrial products which were reviewed following this last amendment. The Commission assisted by the ETQG, has reviewed all the new requests for temporary suspension of autonomous Common Customs Tariff duties presented to it by the Member States. These new requests for suspension were examined in the light of the criteria set out in the Communication from the Commission concerning autonomous tariff suspensions and quotas (see OJ C 128, 25.4.1998, p. 2). The proposal is in line with the trade, entreprise, development and external relations policies. Especially this proposal is not at the expense of countries enjoying a preferential trading agreement with the EU (e.g. GSP, ACP regime, candidate countries and potential candidates).
2. RESULTS OF CONSULTATIONS WITH THE INTERESTED PARTIES AND
IMPACT ASSESSMENTS
The Economic Tariff Questions Group representing the industries of each Member State was
consulted. All listed suspensions correspond to agreements or compromises reached in the
discussions of the group.
EN 2 EN
There was no mention of potentially serious risks with irreversible consequences.
This proposal will follow an inter-service consultation procedure and will be published after its adoption by the Council. 3. LEGAL ELEMENTS OF THE PROPOSAL The legal basis of this regulation proposal is Article 31 of the Treaty on the Functioning of the European Union. The proposal falls under the exclusive competence of the Union. The proposal complies with the principle of proportionality as this set of measures is in line with the principles set out to simplify the procedures for the operators engaged in foreign trade and in accordance with the Commission communication concerning autonomous tariff suspensions and quotas (C 128, 25.4.1998, p.2). By virtue of Article 31 of the Treaty on the Functioning of the European Union autonomous tariff suspensions and quotas are approved by the Council acting by qualified majority on the basis of a Commission proposal, therefore a regulation is the appropriate instrument. 4. BUDGETARY IMPLICATION Uncollected customs duties of a total amount of approximately 1 032 Mio €/year. The effect on the traditional own resources of the budget is -774 Mio €/year (75% x 1 032 Mio €/year).
2011/0408 (NLE)
Proposal for a
COUNCIL REGULATION
suspending the autonomous Common Customs Tariff duties on certain agricultural,
fishery and industrial products
THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the European Commission, Whereas: (1) The production in the European Union of certain industrial, agricultural and fishery products specified in this Regulation is currently inadequate or non-existent and thus, the needs of user industries in the Union cannot be met. (2) It is therefore in the interest of the Union to suspend partially or totally the autonomous Common Customs Tariff duties for those products. (3) Regulation (EC) No 1255/96 i of 27 June 1996 temporarily suspending the autonomous
Common Customs Tariff duties on certain agricultural, fishery and industrial products 2
has been amended many times. In the interest of transparency it should therefore be replaced in its entirety.
(4) The Regulations suspending the autonomous Common Customs Tariff duties on
certain industrial, agricultural and fishery products have largely renewed previous
measures. Therefore, in the interests of rationalizing implementation of the measures
concerned it is appropriate not to limit the period of validity of this Regulation as its
scope can be adapted and products added to or removed from the Annex through a
Council Regulation.
(5) In view of their temporary nature, the suspensions listed in the Annex to this
Regulation should be reviewed systematically, at the latest five years after their
application or renewal. Moreover, closure of certain suspensions should be warranted
at any time, as a result of a proposal of the Commission on the basis of a review
carried out on initiative of the Commission or on request of one or more Member
States if the suspensions are no longer in the Union's interest to be maintained or due
to technical product developments, to changed circumstances or to economic trends on
the market.
EN 4 EN
(6) In accordance with the principle of proportionality it is necessary and appropriate for the achievement of the basic objectives of this regulation (i.e. to improve the competitive capacity of the EU industry, to enable the latter to maintain or create employment, modernise their structures, etc.) to lay down rules on the suspension of the Common Customs Tariff duties for certain products. This regulation does not go beyond what is necessary to achieve the objectives pursued in accordance with Article 5(4) of the Treaty on European Union, HAS ADOPTED THIS REGULATION:
Article 1
The autonomous Common Customs Tariff duties for the agricultural, fishery and industrial
products listed in the Annex shall be suspended as set out in the Annex.
Article 2
-
1.The Commission may at any time review the suspensions for the products listed in the
Annex in the following cases:
(a) at its own initiative;
(b) at the request of a Member State or Member States.
-
2.The Commission shall carry out a mandatory review of the suspensions in the year set out
in the Annex.
-
3.For the purpose of the review the Commission shall be assisted by a group of experts from
the Member States.
Article 3
Where the Commission considers, on the basis of the review provided for in Article 2, that a
suspension for a certain product is to be changed or terminated, it shall submit to the Council
a proposal to amend the list set out in the Annex accordingly.
Article 4
Regulation (EC) No 1255/96 i is repealed.
Article 5
This Regulation shall enter into force on the day of its publication in the Official Journal of
the European Union.
It shall apply from 1 January 2012.
This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels,
For the Council The President
ANNEX
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 0302 59 90 30 Red snapper (Lutjanus purpureus), fresh, chilled, for processing(1)(2) 0 % 31.12.2013 ex 0302 90 00 95 Hard fish roes, fresh, chilled or frozen 0 % 31.12.2013 ex 0303 90 90 91 ex 0305 20 00 11 Hard fish roes, salted or in brine 0 % 31.12.2013 ex 0305 20 00 30 ex 0710 21 00 10 Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, 0 % 31.12.2013
of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals(1)(2)
ex 0710 80 95 50 Bamboo shoots, frozen, not put up for retail sale 0 % 31.12.2013 ex 0711 59 00 11 Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, 0 % 31.12.2016
Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally
preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable
in that state for immediate consumption, for the food-canning industry(1)
ex 0712 32 00 10 Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in 0 % 31.12.2013
identifiable slices or pieces, for treatment other than simple repacking for retail
ex 0712 33 00 10 sale(1)(2)
ex 0712 39 00 31
ex 0804 10 00 30 Dates, fresh or dried, for use in the manufacture (excluding packing) of products of 0 % 31.12.2013 drink or food industries
(1) ex 0810 40 50 10 Cranberries of the species Vaccinium macrocarpon, fresh, for use in the manufacture 0 % 31.12.2013
(excluding packing) of products of drink or food industries (1)
0811 90 50 Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, 0 % 31.12.2013 frozen, not containing added sugar or other sweetening matter
0811 90 70 ex 0811 90 95 70
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 0811 90 95 20 Boysenberries, frozen, not containing added sugar, not put up for retail sale 0 % 31.12.2013
ex 0811 90 95 30 Pineapple (Ananas comosus), in pieces, frozen 0 % 31.12.2013
ex 0811 90 95 40 Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not 0 % 31.12.2013
containing added sugar or other sweetening matter
ex 1511 90 19 10 Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: 0 % 31.12.2013
ex 1511 90 91 10 — industrial monocarboxylic fatty acids of subheading 3823 19 10,
ex 1513 11 10 10 — methyl esters of fatty acids of heading 2915 or 2916,
ex 1513 19 30 10 — fatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the
manufacture of cosmetics, washing products or pharmaceutical products,
ex 1513 21 10 10
— fatty alcohols of subheading 2905 16, pure or mixed, used for the
ex 1513 29 30 10 manufacture of cosmetics, washing products or pharmaceutical products,
— stearic acid of subheading 3823 11 00 or — goods of heading 3401 (1)
ex 1515 90 99 92 Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of 0 % 31.12.2013 arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid
ex 1516 20 96 20 Jojoba oil, hydrogenated and interesterified, without any further chemical 0 % 31.12.2014 modification and not subjected to any texturisation process
ex 1517 90 99 10 Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % 0 % 31.12.2016 arachidonic acid or 12 % or more but not more than 50 % docosahexaenoic acid and
standardized with high oleic sunflower oil (HOSO) ex 1604 11 00 20 Pacific salmon (Oncorhynchus spp.), for the processing industry for manufacture into 0 % 31.12.2013
pastes or spreads(1) ex 1604 32 00 10 Hard fish roes, washed, cleaned of adherent organs and simply salted or in brine, for 0 % 31.12.2013
processing(1) ex 1605 10 00 11 Crabs of the species "King" (Paralithodes camchaticus), "Hanasaki" (Paralithodes 0 % 31.12.2013
brevipes), "Kegani" (Erimacrus isenbecki), "Queen" and "Snow" (Chionoecetes
ex 1605 10 00 19 spp.), "Red" (Geryon quinquedens), "Rough stone" ( eolithodes asperrimus),
Lithodes santolla, "Mud" (Scylla serrata), "Blue" (Portunus spp.), simply boiled in water and shelled, whether or not frozen, in immediate packings of a net content of
EN 8 EN
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 1902 30 10 10 Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) 0 % 31.12.2013 Wilczek), not put up for retail sale
ex 1903 00 00 20
ex 2005 91 00 10 Bamboo shoots, prepared or preserved, in immediate packings of a net content of 0 % 31.12.2013 more than 5 kg
ex 2007 99 50 40 Mango puree concentrate: 6 %(3) 31.12.2015 ex 2008 99 48 93 — of the genus Mangifera, — of a Brix value of 27 or more but not more than 31, used in the manufacture of products of drink industry (1) ex 2007 99 50 50 Acerola puree concentrate: 9 %(3) 31.12.2015 ex 2008 99 49 50 — of the genus Malpighia, — of a Brix value of 19 or more but not more than 31, for use in the manufacture of products of drink industry (1) ex 2007 99 50 60 Guava puree concentrate: 6 %(3) 31.12.2015 ex 2008 99 48 20 — of the genus Psidium, — of a Brix value of 19 or more but not more than 31, for use in the manufacture of products of drink industry (1) ex 2008 60 19 30 Sweet cherries containing added spirit, whether or not with a sugar content of 9 % by 10 %(3) 31.12.2012 weight, of a diameter of not more than 19,9 mm, with stone, for use in chocolate
ex 2008 60 39 30 products(1)
ex 2008 93 91 20 Sweetened dried cranberries, excluding packing alone as processing, for the 0 % 31.12.2012 manufacture of products of food processing industries (4)
— not from concentrate, — of the genus Mangifera,
EN 9 EN
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— of a Brix value of 14 or more, but not more than 20 used in the manufacture of products of drink industry (1)
ex 2008 99 49 30 Seedless boysenberry puree not containing added spirit, whether or not containing 0 % 31.12.2014 added sugar
ex 2008 99 99 40
ex 2009 41 92 70 Pineapple juice: 8 % 31.12.2015 ex 2009 41 99 70 — not from concentrate,
— of the genus Ananas, — of a Brix value of 11 or more but not more than 16, used in the manufacture of products of drink industry (1)
ex 2009 49 30 91 Pineapple juice, other than in powder form: 0 % 31.12.2014 — with a Brix value of more than 20 but not more than 67,
— a value of more than €30 per 100 kg net weight, — containing added sugars used in the manufacture of products of drink industry (1)
ex 2009 81 31 10 Cranberry juice concentrate: 0 % 31.12.2014 — of a Brix value of 40 or more but not more than 66,
— in immediate packings of a content of 50 litres or more ex 2009 89 79 85 Acai berry juice concentrate: 0 % 31.12.2016
— of the species Euterpe oleracea, — frozen, — not sweetened, — not in powder form, — of a Brix value of 23 or more but not more than 32,
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
in immediate packings of a content of 10 kg or more ex 2009 89 79 92 Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more 0 % 31.12.2016
than 67, in immediate packing of a content of 50 litres or more ex 2009 89 99 93 Untreated frozen coconut water, in immediate packing of a content of 50 litres or 0 % 31.12.2016
more ex 2106 10 20 10 Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of 0 % 31.12.2013
calcium phosphate ex 2106 90 92 45 Preparation containing by weight: 0 % 31.12.2016
— more than 30 % but not more than 35 % licorice extract, — more than 65 % but not more than 70 % tricaprylin, standardized by weight to 3 % or more but not more than 4 % glabridin
ex 2519 90 10 10 Fused magnesia with a purity by weight of 97 % or more 0 % 31.12.2016 ex 2710 12 25 10 Mixture of isomers 2,4,4-trimethylpent-1-ene and 2,4,4-trimethylpent-2-ene 0 % 31.12.2013 ex 2804 50 90 10 Tellurium of a purity by weight of 99,99 % or more, but not more than 99,999 % by 0 % 31.12.2013
weight, (CAS RN 13494-80-9) ex 2805 30 10 10 Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of 0 % 31.12.2013
cerium ex 2805 30 90 30 Rare earth metals, scandium and yttrium of a purity by weight of 98,5 % or more 0 % 31.12.2015 ex 2811 19 80 10 Sulphamidic acid (CAS RN 5329-14-6) 0 % 31.12.2013 ex 2811 22 00 10 Silicon dioxide in the form of powder, for use in the manufacture of high 0 % 31.12.2013
performance liquid chromatography columns (HPLC) and sample preparation cartridges(1)
ex 2811 22 00 30 Balls of porous white silica of a particle size of more than 1 µm for use in the 0 % 31.12.2016 manufacture of cosmetic products(1)
ex 2812 90 00 10 Nitrogen trifluoride (CAS RN 7783-54-2) 0 % 31.12.2013 ex 2812 90 00 20 Silicon tetrafluoride (CAS RN 7783-61-1) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2818 10 91 10 Sintered corundum with micro crystalline structure, containing by weight: 0 % 31.12.2015 — 94 % or more, but not more than 98,5 % of α-Al 2 O 3 ,
— 2 % (± 1,5 %) of magnesium spinel, — 1 % (± 0,6 %) of yttrium oxide and — 2 % (± 1,2 %) of each lanthanum oxide and neodymium oxide with less than 50 % of the total weight having a particle size of more than 10 mm
ex 2818 20 00 10 Activated alumina with a specific surface area of at least 350 m 2 /g 0 % 31.12.2014
ex 2818 30 00 10 Aluminium hydroxide oxide in the form of pseudo-boehmite 4 % 31.12.2013 2819 10 00 Chromium trioxide 0 % 31.12.2016 ex 2823 00 00 10 Titanium dioxide with a purity by weight of 99 % or more, (CAS RN 13463-67-7) 0 % 31.12.2013 ex 2825 50 00 20 Copper (I or II) oxide containing by weight 78 % or more of copper and not more 0 % 31.12.2013
than 0,03 % of chloride ex 2826 19 90 10 Tungsten hexafluoride with a purity of 99,9 % by weight or more, (CAS RN 7783- 0 % 31.12.2015
82-6) ex 2827 39 85 10 Copper monochloride of a purity by weight of 96 % or more but not more than 99 % 0 % 31.12.2013 ex 2827 39 85 20 Antimony pentachloride of a purity by weight of 99 % or more, (CAS RN 7647-18-9) 0 % 31.12.2016 ex 2827 39 85 30 Manganese dichloride (CAS RN 7773-01-5) 0 % 31.12.2013 ex 2827 49 90 10 Hydrated zirconium dichloride oxide 0 % 31.12.2013 ex 2830 10 00 10 Disodium tetrasulphide, containing by weight 38 % or less of sodium calculated on 0 % 31.12.2013
the dry weight ex 2833 29 80 20 Manganese sulphate monohydrate 0 % 31.12.2013 ex 2833 29 80 30 Zirconium sulphate (CAS RN 14644-61-2) 0 % 31.12.2015 ex 2835 10 00 10 Sodium hypophosphite monohydrate (CAS RN 10039-56-2) 0 % 31.12.2012
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2836 91 00 20 Lithium carbonate, containing one or more of the following impurities at the 0 % 31.12.2013 concentrations indicated:
— 2 mg/kg or more of arsenic, — 200 mg/kg or more of calcium, — 200 mg/kg or more of chlorides, — 20 mg/kg or more of iron, — 150 mg/kg or more of magnesium, — 20 mg/kg or more of heavy metals, — 300 mg/kg or more of potassium, — 300 mg/kg or more of sodium, — 200 mg/kg or more of sulphates, determined according to the methods specified in the European Pharmacopœia
ex 2836 99 17 20 Zirconium (IV) basic carbonate 0 % 31.12.2013 ex 2837 19 00 20 Copper cyanide (CAS RN 544-92-3) 0 % 31.12.2013 ex 2837 20 00 10 Tetrasodium hexacyanoferrate (II), (CAS RN 13601-19-9) 0 % 31.12.2016 ex 2839 19 00 10 Disodium disilicate (CAS RN 13870-28-5) 0 % 31.12.2012 ex 2839 90 00 10 Lead silicate hydrate, of a lead content by weight of (84,5 ± 1,5) %, evaluated as lead 0 % 31.12.2013
monoxide, in the form of powder ex 2839 90 00 20 Calcium silicate (CAS RN 1344-95-2) 0 % 31.12.2013 2841 30 00 Sodium dichromate (CAS RN 10588-01-9) 0 % 31.12.2013 ex 2841 80 00 10 Diammonium wolframate (ammonium paratungstate), (CAS RN 11120-25-5) 0 % 31.12.2012 ex 2841 90 85 10 Lithium cobalt(III) oxide with a cobalt content of at least 59 %, (CAS RN 12190-79- 0 % 31.12.2012
-
3)ex 2842 10 00 10 Synthetic Beta Zeolite powder 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2842 10 00 20 Synthetic Chabasite Zeolite Powder 0 % 31.12.2014 ex 2842 90 10 10 Sodium selenate (CAS RN 13410-01-0) 0 % 31.12.2014 ex 2843 29 00 10 Silver oxide, nitrate- and carbonate-free, with a silver content of at least 99,99 % by 0 % 31.12.2016
weight of the metal content, for the manufacture of silver oxide batteries(1)
2845 10 00 Heavy water (deuterium oxide) (Euratom) 0 % 31.12.2013 2845 90 10 Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in 0 % 31.12.2013
deuterium; mixtures and solutions containing these products (Euratom) ex 2845 90 90 10 Helium-3 0 % 31.12.2016 ex 2845 90 90 20 Water enriched at a level of 95 % or more by weight with oxygen-18 0 % 31.12.2013
ex 2845 90 90 30 Carbon monoxide 13 C 0 % 31.12.2016
ex 2845 90 90 40 Iron boride enriched at a level of more than 95 % by weight with boron-10 0 % 31.12.2013 ex 2846 10 00 10 Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of 0 % 31.12.2013
rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide
ex 3824 90 97 48 or iron oxide, and having a loss on ignition of 5 % or more by weight
ex 2846 10 00 20 Dicerium tricarbonate, whether or not hydrated (CAS RN 537-01-9) 0 % 31.12.2013 ex 2846 10 00 30 Cerium lanthanum carbonate, whether or not hydrated 0 % 31.12.2013 ex 2846 10 00 40 Cerium lanthanum neodymium praseodymium carbonate, whether or not hydrated 0 % 31.12.2013 2846 90 00 Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or 0 % 31.12.2013
of mixtures of these metals, other than those of subheading 2846 10 00 ex 2848 00 00 10 Phosphine (CAS RN 7803-51-2) 0 % 31.12.2013 ex 2850 00 20 10 Silane (CAS RN 7803-62-5) 0 % 31.12.2013 ex 2850 00 20 20 Arsine (CAS RN 7784-42-1) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2850 00 20 30 Titanium nitride with a particle size of not more than 250 nm, (CAS RN 25583-20-4) 0 % 31.12.2012 ex 2850 00 60 10 Sodium azide (CAS RN 26628-22-8) 0 % 31.12.2013 ex 2853 00 90 10 Chlorosulphonyl isocyanate (CAS RN 1189-71-5) 0 % 31.12.2016 ex 2903 39 90 10 Carbon tetrafluoride (tetrafluoromethane), (CAS RN 75-73-0) 0 % 31.12.2013 ex 2903 39 90 30 Perfluoroethane (CAS RN 76-16-4) 0 % 31.12.2013 ex 2903 39 90 40 1,1-Difluoroethane (CAS RN 75-37-6) 0 % 31.12.2013 ex 2903 39 90 50 1,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1) 0 % 31.12.2013 ex 2903 39 90 70 1,1,1,2-Tetrafluoroethane, certified odourless containing a maximum : 0 % 31.12.2016
— 600 ppm by weight of 1,1,2,2-tetrafluoroethane, — 2 ppm by weight of pentafluoroethane, — 2 ppm by weight of chlorodifluoromethane, — 2 ppm by weight of chloropentafluoroethane, — 2 ppm by weight of dichlorodifluoromethane for use in the manufacture of pharmaceutical grade propellant for medical metred dose inhalers, (CAS RN 811-97-2)(1)
ex 2903 39 90 75 Trans-1,3,3,3-tetrafluoroprop-1-ene (CAS RN 1645-83-6 ) 0 % 31.12.2013 ex 2903 39 90 80 Hexafluoropropene (CAS RN 116-15-4) 0 % 31.12.2016 ex 2903 77 30 10 1,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5) 0 % 31.12.2013 ex 2903 77 90 10 Chlorotrifluoroethylene (CAS RN 79-38-9) 0 % 31.12.2016 ex 2903 89 90 10 1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo 0 % 31.12.2013
[12.2.1.1 6,9 .0 2,13 .0 5,10 ]octadeca-7,15-diene, (CAS RN 13560-89-9)
ex 2903 89 90 30 Octafluorocyclopentene (CAS RN 559-40-0) 0 % 31.12.2016
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2903 99 90 10 Di- or tetrachlorotricyclo[8.2.2.2 4,7 ]hexadeca-1(12),4,6,10,13,15-hexaene, mixed 0 % 31.12.2013
isomers ex 2903 99 90 20 1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9) 0 % 31.12.2013 ex 2903 99 90 40 2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing: 0 % 31.12.2013
— 0,001 mg/kg or less of tetrachlorodibenzodioxines, — 0,001 mg/kg or less of tetrachlorodibenzofurans, — 0,2 mg/kg or less of tetrachlorobiphenyls
ex 2903 99 90 50 Fluorobenzene (CAS RN 462-06-6) 0 % 31.12.2013 ex 2903 99 90 60 α-Chloro(ethyl)toluenes 0 % 31.12.2013 ex 2903 99 90 70 α,α,α’,α’-Tetrachloro-o-xylen (CAS RN 25641-99-0) 0 % 31.12.2015 ex 2904 10 00 30 Sodium p-styrenesulphonate (CAS RN 2695-37-6) 0 % 31.12.2014 ex 2904 10 00 40 Sodium toluene-4-sulphonate (CAS RN 657-84-1) 0 % 31.12.2012 ex 2904 10 00 50 Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8) 0 % 31.12.2014 ex 2904 20 00 10 Nitromethane (CAS RN 75-52-5) 0 % 31.12.2015 ex 2904 20 00 20 Nitroethane (CAS RN 79-24-3) 0 % 31.12.2015 ex 2904 20 00 30 1-Nitropropane (CAS RN 108-03-2) 0 % 31.12.2015 ex 2904 20 00 40 2-Nitropropane (CAS RN 79-46-9) 0 % 31.12.2013 ex 2904 90 40 10 Trichloronitromethane, for the manufacture of goods of subheading 3808 92, (CAS 0 % 31.12.2013
RN 76-06-2) (1) ex 2904 90 95 20 1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7) 0 % 31.12.2013 ex 2904 90 95 30 Tosyl chloride (CAS RN 98-59-9) 0 % 31.12.2014
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2905 19 00 11 Potassium tert-butanolate (potassium tert-butoxide), whether or not in the form of a 0 % 31.12.2013 solution in tetrahydrofuran
ex 3824 90 97 56
ex 2905 19 00 30 2,6-Dimethylheptan-4-ol (CAS RN 108-82-7) 0 % 31.12.2013 ex 2905 19 00 40 2,6-Dimethylheptan-2-ol (CAS RN 13254-34-7) 0 % 31.12.2014 ex 2905 22 00 20 Linalool (CAS RN 78-70-6) 0 % 31.12.2016 ex 2905 29 90 10 3,5-Dimethylhex-1-yn-3-ol (CAS RN 107-54-0) 0 % 31.12.2014 ex 2905 29 90 20 Dec-9-en-1-ol (CAS RN 13019-22-2) 0 % 31.12.2014 ex 2905 29 90 30 Dodeca-8,10-dien-1-ol (CAS RN 33956-49-9) 0 % 31.12.2015 ex 2905 39 95 10 Propane-1,3-diol (CAS RN 504-63-2) 0 % 31.12.2015 ex 2905 39 95 20 Butane-1,2-diol (CAS RN 584-03-2) 0 % 31.12.2016 ex 2905 39 95 30 2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7) 0 % 31.12.2016 ex 2905 49 00 10 Ethylidynetrimethanol (CAS RN 77-85-0) 0 % 31.12.2014 ex 2905 59 98 20 2,2,2-Trifluoroethanol (CAS RN 75-89-8) 0 % 31.12.2014 2906 11 00 Menthol 0 % 31.12.2013 ex 2906 19 00 10 Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8) 0 % 31.12.2013 ex 2906 19 00 20 4,4’-Isopropylidenedicyclohexanol 0 % 31.12.2013 ex 2906 29 00 10 2,2’-(m-Phenylene)dipropan-2-ol (CAS RN 1999-85-5) 0 % 31.12.2014 ex 2906 29 00 20 1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7) 0 % 31.12.2013 ex 2907 15 90 10 2-Naphthol (CAS RN 135-19-3) 0 % 31.12.2016
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2907 19 90 10 2,3,5-Trimethylphenol (CAS RN 697-82-5) 0 % 31.12.2013 ex 2907 19 90 20 Biphenyl-4-ol (CAS RN 92-69-3) 0 % 31.12.2013 ex 2907 21 00 10 Resorcinol (CAS RN 108-46-3) 0 % 31.12.2013 ex 2907 29 00 20 4,4'-(3,3,5-Trimethylcyclohexylidene)diphenol 0 % 31.12.2013 ex 2907 29 00 30 4,4',4"-Ethylidynetriphenol 0 % 31.12.2013 ex 2907 29 00 35 4-[2-(4-Hydroxy-3-prop-2-enylphenyl)propan-2-yl]-2-prop-2-enylphenol, (CAS RN 0 % 31.12.2016
1745-89-7) ex 2907 29 00 50 6,6',6"-Tricyclohexyl-4,4',4"-butane-1,1,3-triyltri(m-cresol) 0 % 31.12.2013 ex 2907 29 00 70 2,2’,2",6,6’,6"-Hexa-tert-butyl-α,α’,α"-(mesitylene-2,4,6-triyl)tri-p-cresol, (CAS RN 0 % 31.12.2013
1709-70-2) ex 2907 29 00 85 Phloroglucinol whether or not hydrated 0 % 31.12.2013 ex 2908 99 00 30 4-Nitrophenol (CAS RN 100-02-7) 0 % 31.12.2013 ex 2909 19 90 20 Bis(2-chloroethyl) ether 0 % 31.12.2013 ex 2909 19 90 30 Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of 0 % 31.12.2013
a purity by weight of 99 % or more ex 2909 19 90 50 3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9) 0 % 31.12.2016 ex 2909 19 90 60 1-Methoxyheptafluoropropane (CAS RN 375-03-1) 0 % 31.12.2013 ex 2909 30 38 10 Bis(pentabromophenyl) ether 0 % 31.12.2013 ex 2909 30 90 10 2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7) 0 % 31.12.2014 ex 2909 30 90 20 1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1) 0 % 31.12.2014 ex 2909 30 90 30 3,4,5-Trimethoxytoluene (CAS RN 6443-69-2) 0 % 31.12.2015
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2909 50 00 10 4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9) 0 % 31.12.2013 ex 2909 50 00 20 Ubiquinol (CAS RN 992-78-9) 0 % 31.12.2015 ex 2909 60 00 10 Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3) 0 % 31.12.2013 ex 2909 60 00 20 1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3) 0 % 31.12.2016 ex 2910 90 00 30 2,3-Epoxypropan-1-ol (glycidol) 0 % 31.12.2013 ex 2910 90 00 60 1,2-Epoxyoctadecane, of a purity by weight of 82 % or more 0 % 31.12.2013 ex 2912 29 00 30 α,α,3-Trimethylbenzenepropanal (CAS RN 107737-97-3) 0 % 31.12.2013 ex 2912 29 00 40 (2E,4E,6E,8E,10E,12E)-2,7,11-Trimethyl-13-(2,6,6-trimethyl-1-cyclohexen-1-yl)- 0 % 31.12.2016
2,4,6,8,10,12-tridecahexaenal, (CAS RN 1638-05-7) ex 2912 49 00 10 3-Phenoxybenzaldehyde (CAS RN 39515-51-0) 0 % 31.12.2013 ex 2912 49 00 30 Salicylaldehyde (CAS RN 90-02-8) 0 % 31.12.2015 ex 2914 19 90 20 Heptan-2-one (CAS RN 110-43-0) 0 % 31.12.2012 ex 2914 19 90 30 3-Methylbutanone (CAS RN 563-80-4) 0 % 31.12.2012 ex 2914 19 90 40 Pentan-2-one (CAS RN 108-10-1) 0 % 31.12.2012 ex 2914 29 00 20 Cyclohexadec-8-enone (CAS RN 3100-36–5) 0 % 31.12.2013 ex 2914 29 00 30 (R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1) 0 % 31.12.2015 ex 2914 29 00 40 Camphor 0 % 31.12.2013 ex 2914 39 00 20 Stearoyl benzoyl methane (CAS RN 58446-52-9) 0 % 31.12.2012 ex 2914 39 00 30 Benzophenone (CAS RN 119-61-9) 0 % 31.12.2012
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2914 39 00 40 1,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7) 0 % 31.12.2012 ex 2914 39 00 50 4-Phenylbenzophenone (CAS RN 2128-93-0) 0 % 31.12.2013 ex 2914 39 00 60 4-Methylbenzophenone (CAS RN 134-84-9) 0 % 31.12.2013 ex 2914 50 00 20 3’-Hydroxyacetophenone (CAS RN 121-71-1) 0 % 31.12.2015 ex 2914 50 00 30 2´-Hydroxyacetophenone 0 % 31.12.2013 ex 2914 50 00 60 2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8) 0 % 31.12.2012 ex 2914 50 00 70 16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one, (CAS RN 974-23-2) 0 % 31.12.2012 ex 2914 50 00 80 2’,6’-Dihydroxyacetophenone (CAS RN 699-83-2) 0 % 31.12.2013 ex 2914 69 90 10 2-Ethylanthraquinone (CAS RN 84-51-5) 0 % 31.12.2013 ex 2914 69 90 20 2-Pentylanthraquinone (CAS RN 13936-21-5) 0 % 31.12.2013 ex 2914 69 90 30 1,4-Dihydroxyanthraquinone (CAS RN 81-64-1) 0 % 31.12.2013 ex 2914 70 00 10 1-Chloro-3,3-dimethylbutan-2-one (CAS RN 13547-70-1) 0 % 31.12.2013 ex 2914 70 00 40 Perfluoro(2-methylpentan-3-one), (CAS RN 756-13-8) 0 % 31.12.2013 ex 2914 70 00 50 3’-Chloropropiophenone (CAS RN 6285-05-8) 0 % 31.12.2013 ex 2914 70 00 60 4’-tert-Butyl-2’,6’-dimethyl-3’,5’-dinitroacetophenone (CAS RN 81-14-1) 0 % 31.12.2015 ex 2914 70 00 70 4-Chloro-4’-hydroxybenzophenone (CAS RN 42019-78-3) 0 % 31.12.2016 ex 2915 29 00 10 Antimony triacetate (CAS RN 6923-52-0) 0 % 31.12.2013 ex 2915 39 00 40 tert-Butyl acetate (CAS RN 540-88-5) 0 % 31.12.2013 ex 2915 39 00 50 3-Acetylphenyl acetate (CAS RN 2454-35-5) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2915 39 00 60 Dodec-8-enyl acetate (CAS RN 28079-04-1) 0 % 31.12.2015 ex 2915 39 00 65 Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4) 0 % 31.12.2015 ex 2915 39 00 70 Dodec-9-enyl acetate (CAS RN 16974-11-1) 0 % 31.12.2015 ex 2915 39 00 75 Isobornyl acetate (CAS RN 125-12-2) 0 % 31.12.2016 ex 2915 39 00 80 1-Phenylethyl acetate (CAS RN 93-92-5) 0 % 31.12.2016 ex 2915 90 70 40 Nonanoic acid (pelargonic acid), (CAS RN 112-05-0) 0 % 31.12.2013 ex 2915 90 70 50 Allyl heptanoate (CAS RN 142-19-8) 0 % 31.12.2014 ex 2915 90 70 60 Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0) 0 % 31.12.2015 ex 2915 90 70 70 Cobalt borate neodecanoate complexes, with a purity by weight of 92 % or more, 0 % 31.12.2016
(CAS RN 68457-13-6) ex 2915 90 70 80 Ethyl difluoroacetate (CAS RN 454-31-9) 0 % 31.12.2016 ex 2916 12 00 10 2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate 0 % 31.12.2013 ex 2916 12 00 20 2-Ethoxyethyl acrylate (CAS RN 106-74-1) 0 % 31.12.2013 ex 2916 12 00 30 Isobutyl acrylate (CAS RN 106-63-8) 0 % 31.12.2013 ex 2916 12 00 40 2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate, 0 % 31.12.2013
(CAS RN 123968-25-2) ex 2916 13 00 10 Hydroxyzinc methacrylate powder (CAS RN 63451-47-8) 0 % 31.12.2014 ex 2916 13 00 20 Zinc dimethacrylate, in the form of powder 0 % 31.12.2013 ex 2916 14 00 10 2,3-Epoxypropyl methacrylate (CAS RN 106-91-2) 0 % 31.12.2013 ex 2916 19 95 20 Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2916 19 95 30 Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5) 0 % 31.12.2016 ex 2916 20 00 50 Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate, (CAS RN 97-41- 0 % 31.12.2013
-
6)ex 2916 20 00 60 3-Cyclohexylpropionic acid (CAS RN 701-97-3) 0 % 31.12.2015 ex 2916 39 90 10 2,3,4,5-Tetrafluorobenzoic acid (CAS RN 1201-31-6) 0 % 31.12.2016 ex 2916 39 90 15 2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3) 0 % 31.12.2016 ex 2916 39 90 20 3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6) 3.6 % 31.12.2013 ex 2916 39 90 25 2-Methyl-3-(4-Fluorophenyl)-propionyl chloride 0 % 31.12.2015 ex 2916 39 90 30 2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1) 0 % 31.12.2015 ex 2916 39 90 40 Vinyl 4-tert-butylbenzoate (CAS RN 15484-80-7) 0 % 31.12.2013 ex 2916 39 90 45 2-Chlorobenzoic acid (CAS RN 118-91-2) 0 % 31.12.2016 ex 2916 39 90 50 3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1) 0 % 31.12.2013 ex 2916 39 90 55 4-tert-Butylbenzoic acid (CAS RN 98-73-7 ) 0 % 31.12.2012 ex 2916 39 90 60 4-Ethylbenzoyl chloride (CAS RN 16331-45-6) 0 % 31.12.2013 ex 2916 39 90 65 2-(4-Nitrophenyl)butyric acid (CAS RN 7463-53-8) 0 % 31.12.2013 ex 2916 39 90 70 Ibuprofen (INN) (CAS RN 15687-27-1) 0 % 31.12.2013 ex 2916 39 90 80 Ethyl 2-(4-nitrophenyl)butyrate 0 % 31.12.2013 ex 2917 11 00 20 Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1) 0 % 31.12.2013 ex 2917 11 00 30 Cobalt oxalate (CAS RN 814-89-1) 0 % 31.12.2014
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2917 12 00 20 Dimethyl adipate (CAS RN 627-93-0) 0 % 31.12.2015 ex 2917 19 10 10 Dimethyl malonate (CAS RN 108-59-8) 0 % 31.12.2014 ex 2917 19 90 20 Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate 0 % 31.12.2013 ex 2917 19 90 30 Ethylene brassylate (CAS RN 105-95-3) 0 % 31.12.2014 ex 2917 19 90 50 Tetradecanedioic acid (CAS RN 821-38-5) 0 % 31.12.2015 ex 2917 19 90 70 Itaconic acid (CAS RN 97-65-4) 0 % 31.12.2013 ex 2917 20 00 30 1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride 0 % 31.12.2013 ex 2917 20 00 40 3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6) 0 % 31.12.2013 ex 2917 34 00 10 Diallyl phthalate (CAS RN 131-17-9) 0 % 31.12.2013 ex 2917 39 95 10 Bis(2-ethylhexyl)-1,4-benzenedicarboxylate (CAS RN 6422-86-2) 0 % 31.12.2014 ex 2917 39 95 20 Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0) 0 % 31.12.2015 ex 2917 39 95 30 Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7) 0 % 31.12.2015 ex 2917 39 95 40 Benzene-1,2,4-tricarboxylic acid 1,2-anhydride (CAS RN 552-30-7) 0 % 31.12.2015 ex 2918 19 98 20 L-Malic acid (CAS RN 97-67-6) 0 % 31.12.2013 ex 2918 23 00 10 Benzyl salicylate (CAS RN 118-58-1) 0 % 31.12.2016 ex 2918 29 00 10 Monohydroxynaphthoic acids 0 % 31.12.2013 ex 2918 29 00 30 Octadecyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate, (CAS RN 2082-79-3) 0 % 31.12.2016 ex 2918 29 00 50 Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate], (CAS RN 0 % 31.12.2013
35074-77-2)
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2918 29 00 60 Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium 0 % 31.12.2016 salts, (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-
47-8, 36457-20-2 or 4247-02-3) ex 2918 30 00 30 Methyl-2-benzoylbenzoate (CAS RN 606-28-0) 0 % 31.12.2013 ex 2918 30 00 40 Phthalaldehydic acid (CAS RN 119-67-5) 0 % 31.12.2013 ex 2918 30 00 50 Methyl (3-oxo-2-pentylcyclopentyl)acetate (CAS RN 24851-98-7) 0 % 31.12.2015 ex 2918 99 90 10 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate, (CAS RN 2386-87- 0 % 31.12.2013
-
0)ex 2918 99 90 20 Methyl 3-methoxyacrylate (CAS RN 5788-17-0) 0 % 31.12.2014 ex 2918 99 90 30 Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2) 0 % 31.12.2013 ex 2918 99 90 40 trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6) 0 % 31.12.2013 ex 2918 99 90 50 Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0) 0 % 31.12.2013 ex 2918 99 90 60 3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2) 0 % 31.12.2013 ex 2918 99 90 70 Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8) 0 % 31.12.2014 ex 2919 90 00 10 2,2’-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt 0 % 31.12.2013 ex 2919 90 00 30 Aluminium hydroxybis[2,2’-methylenebis(4,6-di-tert-butylphenyl)phosphate], (CAS 0 % 31.12.2013
RN 151841-65-5) ex 2919 90 00 40 Tri-n-hexylphosphate (CAS RN 2528-39-4) 0 % 31.12.2013 ex 2920 19 00 10 Fenitrothion (ISO) (CAS RN 122-14-5) 0 % 31.12.2013 ex 2920 19 00 20 Tolclofos-methyl (ISO) (CAS RN 57018-04-9) 0 % 31.12.2013 ex 2920 90 10 10 Diethyl sulphate 0 % 31.12.2013 ex 2920 90 10 20 Diallyl 2,2’-oxydiethyl dicarbonate (CAS RN 142-22-3) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2920 90 10 40 Dimethyl carbonate (CAS RN 616-38-6) 0 % 31.12.2013 ex 2920 90 10 50 Di-tert-butyl dicarbonate (CAS RN 24424-99-5) 0 % 31.12.2013 2920 90 30 Trimethyl phosphite (CAS RN 121-45-9) 0 % 31.12.2013 2920 90 40 Triethyl phosphite (CAS RN 122-52-1) 0 % 31.12.2016 ex 2920 90 85 10 O,O’-Dioctadecyl pentaerythritol bis(phosphite) 0 % 31.12.2013 ex 2920 90 85 20 Tris(methylphenyl)phosphite (CAS RN 25586-42-9) 0 % 31.12.2015 ex 2920 90 85 30 2,2’-[[3,3’,5,5’-Tetrakis(1,1-dimethylethyl)[1,1’-biphenyl]-2,2’- 0 % 31.12.2015
diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine], (CAS RN 138776-88-2) ex 2920 90 85 40 Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8) 0 % 31.12.2015 ex 2921 19 50 10 Diethylamino-triethoxysilane 0 % 31.12.2014 ex 2929 90 00 20 ex 2921 19 99 20 Ethyl(2-methylallyl)amine 0 % 31.12.2013 ex 2921 19 99 30 Allylamine (CAS RN 107-11-9) 0 % 31.12.2013 ex 2921 19 99 40 Tris(diethylamido)tert-butylimido tantalum (V), (CAS RN 169896-41-7) 0 % 31.12.2013 ex 2921 19 99 50 Tetrakis (Ethylmethylamino) hafnium (IV), (CAS RN 352535-01-4) 0 % 31.12.2013 ex 2921 19 99 60 Tetrakis(ethylmethylamino) zirconium (IV), (CAS RN 175923-04-3) 0 % 31.12.2013 ex 2921 29 00 10 , , ´, ´-Tetrabutylhexamethylenediamine 0 % 31.12.2013 ex 2921 29 00 20 Tris[3-(dimethylamino)propyl]amine 0 % 31.12.2013 ex 2921 29 00 30 Bis[3-(dimethylamino)propyl]methylamine 0 % 31.12.2013 ex 2921 29 00 40 Decamethylenediamine (CAS RN 646-25-3) 0 % 31.12.2015
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2921 29 00 50 ’-[3-(Dimethylamino)propyl]- , -dimethylpropane-1,3-diamine, (CAS RN 6711- 0 % 31.12.2016 48-4)
ex 2921 30 99 10 Dicyclohexyl(methyl)amine 0 % 31.12.2013 ex 2921 30 99 20 Cyclohex-1,3-ylenebis(methylamine), for the manufacture of dishwashing products, 0 % 31.12.2013
(CAS RN 2579-20-6)(1) ex 2921 30 99 30 1,3-Cyclohexanedimethanamine (CAS RN 1477-55-0) 0 % 31.12.2015 ex 2921 42 00 10 2,6-Dichloro-4-nitroaniline (CAS RN 99-30-9) 0 % 31.12.2013 ex 2921 42 00 15 4-Amino-3-nitrobenzenesulphonic acid (CAS RN 616-84-2) 0 % 31.12.2013 ex 2921 42 00 25 Sodium hydrogen 2-aminobenzene-1,4-disulphonate 0 % 31.12.2013 ex 2921 42 00 35 2-Nitroaniline (CAS RN 88-74-4) 0 % 31.12.2013 ex 2921 42 00 45 2,4,5-Trichloroaniline (CAS RN 636-30-6) 0 % 31.12.2013 ex 2921 42 00 50 3-Aminobenzenesulfonic acid (CAS RN 121-47-1) 0 % 31.12.2013 ex 2921 42 00 70 2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2) 0 % 31.12.2013 ex 2921 42 00 80 4-Chloro-2-nitroaniline (CAS RN 89-63-4) 0 % 31.12.2013 ex 2921 42 00 82 2-Chloro-4-nitroaniline (CAS RN 121-87-9) 0 % 31.12.2015 ex 2921 42 00 85 3,5-Dichloroaniline (CAS RN 626-43-7) 0 % 31.12.2013 ex 2921 43 00 10 5-Amino-2-chlorotoluene-4-sulphonic acid (CAS RN 88-53-9) 0 % 31.12.2013 ex 2921 43 00 20 4-Amino-6-chlorotoluene-3-sulphonic acid 0 % 31.12.2013 ex 2921 43 00 30 3-Nitro-p-toluidine (CAS RN 119-32-4) 0 % 31.12.2013 ex 2921 43 00 40 4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2921 43 00 50 4-Aminobenzotrifluoride (CAS RN 455-14-1) 0 % 31.12.2015 ex 2921 43 00 60 3-Aminobenzotrifluoride (CAS RN 98-16-8) 0 % 31.12.2015 ex 2921 43 00 70 -Ethyl-m-toluidine (CAS RN 102-27-2) 0 % 31.12.2016 ex 2921 44 00 20 Diphenylamine (CAS RN 122-39-4) 0 % 31.12.2013 ex 2921 45 00 10 Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate 0 % 31.12.2013 ex 2921 45 00 20 2-Aminonaphthalene-1,5-disulphonic acid and its sodium salts 0 % 31.12.2013 ex 2921 45 00 40 1-Naphthylamine (CAS RN 134-32-7) 0 % 31.12.2013 ex 2921 49 00 20 Pendimethalin (ISO) (CAS RN 40487-42-1) 3.5 % 31.12.2013 ex 2921 49 00 40 -1-Naphthylaniline (CAS RN 90-30-2) 0 % 31.12.2013 ex 2921 49 00 60 -Benzyl- -ethylaniline (CAS RN 92-59-1) 0 % 31.12.2014 ex 2921 49 00 70 2-Chlorobenzylamine (CAS RN 89-97-4) 0 % 31.12.2015 ex 2921 49 00 80 4-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5) 0 % 31.12.2015 ex 2921 51 19 20 Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % 0 % 31.12.2013
of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2- methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight
ex 2921 51 19 30 2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9) 0 % 31.12.2013 ex 2921 51 19 40 p-Phenylenediamine (CAS RN 106-50-3) 0 % 31.12.2016 ex 2921 51 19 50 Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene 0 % 31.12.2013 ex 2921 59 90 10 Mixture of isomers of 3,5-diethyltoluenediamine 0 % 31.12.2013 ex 2921 59 90 30 3,3’-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9) 0 % 31.12.2012
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2921 59 90 40 4,4’-Diaminostilbene-2,2’-disulphonic acid (CAS RN 81-11-8) 0 % 31.12.2013 ex 2921 59 90 50 -Ethyl- ’, ’-dimethyl- -phenyl-ethylene-1,2-diamine (CAS RN 27692-91-7) 0 % 31.12.2014 ex 2922 19 85 30 , , ’, ’-Tetramethyl-2,2’-oxybis(ethylamine) (CAS RN 3033-62-3) 0 % 31.12.2013 ex 2922 19 85 40 2-(Dimethylamino) ethyl benzoate (CAS RN 2208-05-1) 0 % 31.12.2014 ex 2922 19 85 45 2-[2-Hydroxyethyl(octadecyl)amino]ethanol (CAS RN 10213-78-2) 0 % 31.12.2016 ex 2922 19 85 50 2-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0) 0 % 31.12.2013 ex 2922 19 85 55 2-[ -(2-Hydroxyethyl)-4-methylanilino]ethanol (CAS RN 3077-12-1) 0 % 31.12.2016 ex 2922 19 85 60 , , ’-trimethyl- ’-(2-hydroxy-ethyl) 2,2’-oxybis(ethylamine), (CAS RN 83016- 0 % 31.12.2013
70-0) ex 2922 19 85 70 D-(-)-threo-2-amino-1-(p-nitrophenyl)propane-1,3-diol (CAS RN 716-61-0) 0 % 31.12.2016 ex 2922 19 85 80 -[2-[2-(Dimethylamino)ethoxy]ethyl]- -methyl-1,3-propanediamine, (CAS RN 0 % 31.12.2014
189253-72-3) ex 2922 21 00 10 2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid and its salts, of a purity by 0 % 31.12.2013
weight of 60 % or more ex 2922 21 00 30 6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7) 0 % 31.12.2013 ex 2922 21 00 40 7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5) 0 % 31.12.2013 ex 2922 21 00 50 Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate, (CAS RN 5460- 0 % 31.12.2013
09-3) ex 2922 29 00 10 2-Methyl- -phenyl-p-anisidine 0 % 31.12.2013 ex 2922 29 00 20 3-Aminophenol (CAS RN 591-27-5) 0 % 31.12.2013 ex 2922 29 00 25 5-Amino-o-cresol (CAS RN 2835-95-2) 0 % 31.12.2013 ex 2922 29 00 45 Anisidines 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2922 29 00 46 p-Anisidine-3-sulphonic acid (CAS RN 13244-33-2) 0 % 31.12.2013 ex 2922 29 00 50 6-Methoxy-m-toluidine 0 % 31.12.2013 ex 2922 29 00 55 3-Amino-4-hydroxybenzenesulphonic acid (CAS RN 98-37-3) 0 % 31.12.2014 ex 2922 29 00 65 4-Trifluoromethoxyaniline (CAS RN 461-82-5) 0 % 31.12.2014 ex 2922 29 00 70 4-Nitro-o-anisidine (CAS RN 97-52-9) 0 % 31.12.2013 ex 2922 29 00 75 4-(2-Aminoethyl)phenol (CAS RN 51-67-2) 0 % 31.12.2015 ex 2922 29 00 80 3-Diethylaminophenol (CAS RN 91-68-9) 0 % 31.12.2013 ex 2922 39 00 10 1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts 0 % 31.12.2013 ex 2922 39 00 20 2-Amino-5-chlorobenzophenone (CAS RN 719-59-5) 0 % 31.12.2015 ex 2922 39 00 70 p-[(2-Chloroethyl)ethylamino]benzaldehyde (CAS RN 2643-07-4) 0 % 31.12.2016 ex 2922 43 00 10 Anthranilic acid (CAS RN 118-92-3) 0 % 31.12.2013 ex 2922 49 85 10 Ornithine aspartate (INNM) 0 % 31.12.2013 ex 2922 49 85 15 DL-Aspartic acid used for the manufacture of food-integrators, (CAS RN 617-45-8) 0 % 31.12.2014
(1) ex 2922 49 85 40 Norvaline 0 % 31.12.2013 ex 2922 49 85 45 Glycine (CAS RN 56-40-6) 0 % 31.12.2015 ex 2922 49 85 50 D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9) 0 % 31.12.2013 ex 2922 49 85 60 Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3) 0 % 31.12.2012 ex 2922 49 85 70 2-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2922 50 00 20 1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride, (CAS RN 0 % 31.12.2014 130198-05-9)
ex 2922 50 00 40 4,4-Dimethoxybutylamine (CAS RN 19060-15-2) 0 % 31.12.2013 ex 2922 50 00 70 2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate 0 % 31.12.2013 ex 2923 90 00 10 Tetramethylammonium hydroxide, in the form of an aqueous solution containing 0 % 31.12.2013
25 % (± 0,5 %) by weight of tetramethylammonium hydroxide ex 2923 90 00 25 Tetrakis(dimethylditetradecylammonium) molybdate, (CAS RN 117342-25-3) 0 % 31.12.2013 ex 2923 90 00 45 Tetrabutylammonium hydroxide in the form of an aqueous solution containing 55 % 0 % 31.12.2014
(± 1 %) by weight of tetrabutylammonium hydroxide, (CAS RN 2052-49-5) ex 2923 90 00 70 Tetrapropylammonium hydroxide, in the form of an aqueous solution containing: 0 % 31.12.2013
— 40 % (± 2 %) by weight of tetrapropylammonium hydroxide, — 0,3 % by weight or less of carbonate, — 0,1 % by weight or less of tripropylamine, — 500 mg/kg or less of bromide and — 25 mg/kg or less of potassium and sodium taken together
ex 2923 90 00 75 Tetraethylammonium hydroxide, in the form of an aqueous solution containing: 0 % 31.12.2015 — 35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,
— not more than 1 000 mg/kg of chloride, — not more than 2 mg/kg of iron and — not more than 10 mg/kg of potassium
ex 2923 90 00 80 Diallyldimethylammonium chloride, in the form of an aqueous solution containing by 0 % 31.12.2013 weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride,
(CAS RN 7398-69-8) ex 2924 19 00 10 2-Acrylamido-2-methylpropanesulphonic acid and its sodium or ammonium salts 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2924 19 00 30 Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0) 0 % 31.12.2013 ex 2924 19 00 40 -(1,1-Dimethyl-3-oxobutyl)acrylamide (CAS RN 2873-97-4) 0 % 31.12.2013 ex 2924 19 00 50 Acrylamide (CAS RN 79-06-1) 0 % 31.12.2013 ex 2924 19 00 60 , -Dimethylacrylamide (CAS RN 2680-03-7) 0 % 31.12.2016 ex 2924 19 00 70 Methylcarbamate (CAS RN 598-55-0) 0 % 31.12.2013 ex 2924 21 00 10 4,4’-Dihydroxy-7,7’-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts 0 % 31.12.2013 ex 2924 29 98 10 Alachlor (ISO), (CAS RN 15972-60-8) 0 % 31.12.2013 ex 2924 29 98 15 Acetochlor (ISO), (CAS RN 34256-82-1) 0 % 31.12.2013 ex 2924 29 98 20 2-Chloro- -(2-ethyl-6-methylphenyl)- -(propan-2-yloxymethyl)acetamide, (CAS 0 % 31.12.2014
RN 86763-47-5) ex 2924 29 98 22 3,3’-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)- , ’- 0 % 31.12.2016
hexamethylenedipropionamide (CAS RN 23128-74-7) ex 2924 29 98 25 3'-Diethylaminoacetanilide 0 % 31.12.2013 ex 2924 29 98 27 2-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9) 0 % 31.12.2016 ex 2924 29 98 30 Propachlor (ISO) (CAS RN 1918-16-7) 0 % 31.12.2013 ex 2924 29 98 35 2´-Methoxyacetoacetanilide (CAS RN 92-15-9) 0 % 31.12.2015 ex 2924 29 98 40 N,N’-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5) 0 % 31.12.2015 ex 2924 29 98 45 Propoxur (ISO) (CAS RN 114-26-1) 0 % 31.12.2015 ex 2924 29 98 50 N,N’-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 42487-09-2) 0 % 31.12.2015 ex 2924 29 98 55 N,N’-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 24304-50-5) 0 % 31.12.2015
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2924 29 98 60 N,N’-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 41131-65- 0 % 31.12.2015 1)
ex 2924 29 98 65 2-(4-Hydroxyphenyl)acetamide (CAS RN 17194-82-0) 0 % 31.12.2013 ex 2924 29 98 75 3-Amino-p-anisanilide (CAS RN 120-35-4) 0 % 31.12.2013 ex 2924 29 98 80 5’-Chloro-3-hydroxy-2’,4’-dimethoxy-2-naphthanilide 0 % 31.12.2013 ex 2924 29 98 85 p-Aminobenzamide (CAS RN 2835-68-9) 0 % 31.12.2013 ex 2924 29 98 86 Anthranilamide of a purity by weight of 99,5 % or more (CAS RN 88-68-6) 0 % 31.12.2012 ex 2924 29 98 87 Paracetamol (INN) (CAS RN 103-90-2) 0 % 31.12.2013 ex 2924 29 98 88 5’-Chloro-3-hydroxy-2’-methyl-2-naphthanilide (CAS RN 135-63-7) 0 % 31.12.2013 ex 2924 29 98 89 Flutolanil (ISO) (CAS RN 66332-96-5) 0 % 31.12.2013 ex 2924 29 98 91 3-Hydroxy-2’-methoxy-2-naphthanilide (CAS RN 135-62-6) 0 % 31.12.2013 ex 2924 29 98 92 3-Hydroxy-2-naphthanilide (CAS RN 92-77-3) 0 % 31.12.2013 ex 2924 29 98 93 3-Hydroxy-2'-methyl-2-naphthanilide 0 % 31.12.2013 ex 2924 29 98 94 2’-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0) 0 % 31.12.2013 ex 2924 29 98 96 4’-Chloro-3-hydroxy-2’,5’-dimethoxy-2-naphthanilide (CAS RN 4273-92-1) 0 % 31.12.2013 ex 2924 29 98 97 1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3) 0 % 31.12.2013 ex 2925 11 00 20 Saccharin and its sodium salt 0 % 31.12.2013 ex 2925 19 95 10 -Phenylmaleimide (CAS RN 941-69-5) 0 % 31.12.2013 ex 2925 29 00 10 Dicyclohexylcarbodiimide (CAS RN 538-75-0) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2926 90 95 20 2-(m-Benzoylphenyl)propiononitrile 0 % 31.12.2013 ex 2926 90 95 25 2,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2) 0 % 31.12.2016 ex 2926 90 95 30 2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanenitrile hydrochloride, (CAS RN 0 % 31.12.2015
2544-13-0) ex 2926 90 95 35 2-Bromo-2(bromomethyl)pentanedinitrile 0 % 31.12.2013 ex 2926 90 95 45 2-Cyanoacetamide (CAS RN 107-91-5) 0 % 31.12.2013 ex 2926 90 95 50 Alkyl or alkoxyalkyl esters of cyanoacetic acid 0 % 31.12.2013 ex 2926 90 95 55 Methyl-2-cyano-2-phenylbutyrate (CAS RN 24131-07-5) 0 % 31.12.2016 ex 2926 90 95 60 Cyanoacetic acid in crystalline form 0 % 31.12.2013 ex 2926 90 95 61 m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3) 0 % 31.12.2016 ex 2926 90 95 63 1-(Cyanoacetyl)-3-ethylurea (CAS RN 41078-06-2) 0 % 31.12.2014 ex 2926 90 95 64 Esfenvalerate of a purity by weight of 83 % or more in a mixture of its own isomers 0 % 31.12.2014
(CAS RN 66230-04-4) ex 2926 90 95 65 Malononitrile 0 % 31.12.2013 ex 2926 90 95 70 Methacrylonitrile (CAS RN 126-98-7) 0 % 31.12.2014 ex 2926 90 95 74 Chlorothalonil (ISO) (CAS RN 1897-45-6) 0 % 31.12.2014 ex 2926 90 95 75 Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0) 0 % 31.12.2014 ex 2926 90 95 80 Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8) 0 % 31.12.2013 ex 2926 90 95 81 4-Aminobenzonitrile (CAS RN 873-74-5) 0 % 31.12.2013 ex 2926 90 95 86 Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2926 90 95 87 Nitrilotriacetonitrile (CAS RN 7327-60-8) 0 % 31.12.2013 ex 2926 90 95 88 1,3-Propylenediaminetetraacetonitrile 0 % 31.12.2013 ex 2926 90 95 89 Butyronitrile 0 % 31.12.2013 ex 2927 00 00 10 2,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride 0 % 31.12.2013 ex 2927 00 00 20 4-Anilino-2-methoxybenzenediazonium hydrogen sulphate 0 % 31.12.2013 ex 2927 00 00 30 4’-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4) 0 % 31.12.2013 ex 2927 00 00 40 2-Hydroxynaphthalene-1-diazonium-4-sulphonate 0 % 31.12.2013 ex 2927 00 00 50 2-Hydroxy-6-nitronaphthalene-1-diazonium-4-sulphonate, of a purity by weight of 0 % 31.12.2013
60 % or more ex 2927 00 00 60 4,4’-Dicyano-4,4’-azodivaleric acid (CAS RN 2638-94-0) 0 % 31.12.2013 ex 2927 00 00 70 Tetrasodium 3,3’-[azoxybis[(2-methoxy-4,1-phenylene)azo]]bis[4,5- 0 % 31.12.2014
dihydroxynaphthalene-2,7-disulphonate], (CAS RN 83968-64-3) ex 2928 00 90 10 3,3´-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)- , ´-bipropionamide 0 % 31.12.2013 ex 2928 00 90 20 2,4,6-Trichlorophenylhydrazine 0 % 31.12.2013 ex 2928 00 90 25 Acetaldehyde oxime in an aqueous solution (CAS RN 107-29-9) 0 % 31.12.2015 ex 2928 00 90 40 O-Ethylhydroxylamine, in the form of an aqueous solution 0 % 31.12.2013 ex 2928 00 90 60 Adipohydrazide 0 % 31.12.2013 ex 2928 00 90 70 Butanone oxime (CAS RN 96-29-7) 0 % 31.12.2013 ex 2928 00 90 75 Metaflumizone (ISO), (CAS RN 139968-49-3) 0 % 31.12.2016 ex 2928 00 90 80 Cyflufenamid (ISO) (CAS RN 180409-60-3) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2928 00 90 85 Daminozide (ISO) with a purity by weight of 99 % or more, (CAS RN 1596-84-5) 0 % 31.12.2016 ex 2929 10 00 10 Methylenedicyclohexyl diisocyanates 0 % 31.12.2013 ex 2929 10 00 15 3,3’-Dimethylbiphenyl-4,4’-diyl diisocyanate (CAS RN 91-97-4) 0 % 31.12.2014 ex 2929 10 00 40 m-Isopropenyl-α,α-dimethylbenzyl isocyanate 0 % 31.12.2013 ex 2929 10 00 50 m-Phenylenediisopropylidene diisocyanate 0 % 31.12.2013 ex 2929 10 00 55 2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8) 0 % 31.12.2015 ex 2929 10 00 60 Trimethylhexamethylene diisocyanate, mixed isomers 0 % 31.12.2013 ex 2929 10 00 80 1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1) 0 % 31.12.2016 ex 2930 20 00 10 Prosulfocarb (ISO) (CAS RN 52888-80-9) 0 % 31.12.2012 ex 2930 20 00 20 2-Isopropylethylthiocarbamate (CAS RN 141-98-0) 0 % 31.12.2016 ex 2930 90 99 10 2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6) 0 % 31.12.2015 ex 2930 90 99 15 Ethoprophos (ISO) (CAS RN 13194-48-4) 0 % 31.12.2013 ex 2930 90 99 20 2-Methoxy-N-[2-nitro-5-(phenylthio)phenyl]acetamide (CAS RN 63470-85-9) 0 % 31.12.2015 ex 2930 90 99 25 Thiophanate-methyl (ISO) 0 % 31.12.2013 ex 2930 90 99 30 4-(4-Isopropoxyphenylsulphonyl)phenol 0 % 31.12.2013 ex 2930 90 99 35 Glutathione (CAS RN 70-18-8) 0 % 31.12.2016 ex 2930 90 99 40 3,3´-Thiodi(propionic acid) (CAS RN 111-17-1) 0 % 31.12.2013 ex 2930 90 99 45 2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate 0 % 31.12.2013 ex 2930 90 99 50 [S-(R*,R*)]-2-Amino-1-[4-(methylthio)-phenyl]-1,3-propanediol, (CAS RN 23150- 0 % 31.12.2015
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
35-8) ex 2930 90 99 55 Thiourea (CAS RN 62-56-6) 0 % 31.12.2015 ex 2930 90 99 60 Methyl phenyl sulphide 0 % 31.12.2013 ex 2930 90 99 62 Zinc bis(benzenesulfinate) (CAS RN 24308-84-7) 0 % 31.12.2014 ex 2930 90 99 64 3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2) 0 % 31.12.2014 ex 2930 90 99 65 Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7) 0 % 31.12.2015 ex 2930 90 99 66 Diphenyl sulphide (CAS RN 139-66-2) 0 % 31.12.2012 ex 2930 90 99 67 3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid 0 % 31.12.2012 ex 2930 90 99 68 Clethodim (ISO) (CAS RN 99129-21-2) 0 % 31.12.2012 ex 2930 90 99 69 2-Amino-4-methylsulphonyl- -methylaniline (CAS RN 73097-51-5) 0 % 31.12.2012 ex 2930 90 99 71 Triphenylsulphonium chloride (CAS RN 4270-70-6) 0 % 31.12.2012 ex 2930 90 99 76 2,2’-Dithiodi(benzoic acid) (CAS RN 119-80-2) 0 % 31.12.2013 ex 2930 90 99 77 4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7) 0 % 31.12.2013 ex 2930 90 99 78 4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6) 0 % 31.12.2016 ex 2930 90 99 80 Captan (ISO) (CAS RN 133-06-2) 0 % 31.12.2013 ex 2930 90 99 81 Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3) 3 % 31.12.2014 ex 2930 90 99 82 Sodium toluene-4-sulphinate (CAS RN 824-79-3) 0 % 31.12.2012 ex 2930 90 99 83 Methyl-p-tolyl sulphone (CAS RN 3185-99-7) 0 % 31.12.2012 ex 2930 90 99 84 2-Chloro-4-(methylsulphonyl)benzoic acid (CAS RN 53250-83-2) 0 % 31.12.2014
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2930 90 99 86 4-Hydroxybenzenethiol (CAS RN 637-89-8) 0 % 31.12.2013 ex 2930 90 99 87 3-Sulphinobenzoic acid 0 % 31.12.2013 ex 2930 90 99 89 Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O- 0 % 31.12.2016
pentyl-dithiocarbonates
2931 90 10 Dimethyl methylphosphonate (CAS RN 756-79-6) 0 % 31.12.2013 ex 2931 90 90 05 Butylethylmagnesium, in the form of a solution in heptane 0 % 31.12.2013 ex 2931 90 90 10 Diethylmethoxyborane (CAS RN 7397-46-8) 0 % 31.12.2015 ex 2931 90 90 15 Triethylborane (CAS RN 97-94-9) 0 % 31.12.2015 ex 2931 90 90 20 Methylcyclopentadienyl manganese tricarbonyl containing not more than 4,9 % by 0 % 31.12.2013
weight of cyclopentadienyl manganese tricarbonyl, (CAS RN 12108-13-3) ex 2931 90 90 25 Methyl tris (2-pentanoneoxime) silane 0 % 31.12.2014 ex 2931 90 90 30 Diethylborane isopropoxide (CAS RN 74953-03-0) 0 % 31.12.2015 ex 2931 90 90 40 -(Phosphonomethyl)iminodiacetic acid 0 % 31.12.2013 ex 2931 90 90 50 Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6) 0 % 31.12.2013 ex 2931 90 90 55 Dimethyl[dimethylsilyldiindenyl]hafnium 0 % 31.12.2014 ex 2931 90 90 70 , -Dimethylanilinium tetrakis(pentafluorophenyl)borate 0 % 31.12.2014 ex 2931 90 90 72 Phenylphosphonic dichloride (CAS RN 824-72-6) 0 % 31.12.2016 ex 2931 90 90 75 Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1) 0 % 31.12.2016 ex 2931 90 90 85 Tributyl(tetradecyl)phosphonium chloride, whether or not in the form of an aqueous 0 % 31.12.2013
solution ex 2931 90 90 86 Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9- 0 % 31.12.2013
phosphabicyclo[4.2.1]nonane
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2931 90 90 87 Tris(4-methylpentan-2-oximino)methylsilane 0 % 31.12.2013 ex 2931 90 90 89 Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345- 0 % 31.12.2014
49-4) ex 2931 90 90 91 Trimethylsilane 0 % 31.12.2016 ex 2931 90 90 92 Trimethylborane (CAS RN 593-90-8) 0 % 31.12.2014
ex 2931 90 90 96 3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8) 0 % 31.12.2013 ex 2931 90 90 97 Potassium 4-tolylphosphinate, in the form of an aqueous solution (CAS RN 208534- 0 % 31.12.2013
39-8) ex 2932 13 00 10 Tetrahydrofurfuryl alcohol (CAS RN 97-99-4) 0 % 31.12.2013 ex 2932 19 00 40 Furan of a purity by weight of 99 % or more 0 % 31.12.2013 ex 2932 19 00 41 2,2 di(tetrahydrofuryl)propane (CAS RN 89686-69-1) 0 % 31.12.2013 ex 2932 19 00 45 1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D- 0 % 31.12.2014
galactopyranoside, (CAS RN 56038-13-2) ex 2932 19 00 50 2-Methylfuran (CAS RN 534-22-5) 0 % 31.12.2015 ex 2932 19 00 70 Furfurylamine (CAS RN 617-89-0) 0 % 31.12.2013 ex 2932 19 00 75 Tetrahydro-2-methylfuran (CAS RN 96-47-9) 0 % 31.12.2013 ex 2932 19 00 80 5-Nitrofurfurylidene di(acetate), (CAS RN 92-55-7) 0 % 31.12.2016 ex 2932 20 90 10 2'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3H),9'- 0 % 31.12.2013
xanthen]-3-one ex 2932 20 90 15 Coumarin (CAS RN 91-64-5) 0 % 31.12.2016 ex 2932 20 90 35 6'-Diethylamino-3'-methyl-2'-(2,4-xylidino)spiro[isobenzofuran-1(3H),9'-xanthen]-3- 0 % 31.12.2013
one
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2932 20 90 55 6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide 0 % 31.12.2013 ex 2932 20 90 60 6’-(Diethylamino)-3’-methyl-2’-(phenylamino)-spiro[isobenzofuran-1(3H),9’- 0 % 31.12.2016
[9H]xanthen]-3-one ex 2932 20 90 70 3’,6’-Bis(ethylamino)-2’,7’-dimethylspiro[isobenzofuran-1(3H),9’-[9H]-xanthen]-3- 0 % 31.12.2013
one, (CAS RN 41382-37-0) ex 2932 20 90 71 2’-[Bis(phenylmethyl)amino]-6’-(diethylamino)-spiro[isobenzofuran-1(3H),9’- 0 % 31.12.2016
[9H]xanthen]-3-one ex 2932 20 90 72 6’-(Dibutylamino)-3’-methyl-2’-(phenylamino)-spiro[isobenzofuran-1(3H),9’- 0 % 31.12.2016
[9H]xanthen]-3-one ex 2932 20 90 80 Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5) 0 % 31.12.2013 ex 2932 20 90 84 Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20- 0 % 31.12.2013
-
5)ex 2932 20 90 85 Hexan-4-olide (CAS RN 695-06-7) 0 % 31.12.2013 ex 2932 99 00 10 Bendiocarb (ISO) (CAS RN 22781-23-3) 0 % 31.12.2013 ex 2932 99 00 15 1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222- 0 % 31.12.2016
05-5) ex 2932 99 00 30 Carbofuran (ISO) (CAS RN 1563-66-2) 0 % 31.12.2013 ex 2932 99 00 35 1,2,3-Trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol, (CAS RN 0 % 31.12.2013
882073-43-0) ex 2932 99 00 40 1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2) 0 % 31.12.2013 ex 2932 99 00 50 7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6) 0 % 31.12.2015 ex 2932 99 00 60 (3aR,5aS,9aS,9bR)-3a,6,6,9a-Tetramethyl-2,4,5,5a,7,8,9,9b-octahydro-1H- 0 % 31.12.2015
benzo[e][1]benzofuran, (CAS RN 6790-58-5) ex 2932 99 00 70 1,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9) 0 % 31.12.2016
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2932 99 00 75 3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0) 0 % 31.12.2016 ex 2932 99 00 80 1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 32647-67-9) 0 % 31.12.2016 ex 2933 19 90 30 3-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0) 0 % 31.12.2013 ex 2933 19 90 40 Edaravone (INN) (CAS RN 89-25-8) 0 % 31.12.2013 ex 2933 19 90 50 Fenpyroximate (ISO) (CAS RN 134098-61-6) 0 % 31.12.2013 ex 2933 19 90 60 Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9) 0 % 31.12.2013 ex 2933 19 90 70 4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2) 0 % 31.12.2013 ex 2933 21 00 10 Hydantoin (CAS RN 461-72-3) 0 % 31.12.2013 ex 2933 21 00 50 1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) 0 % 31.12.2016 ex 2933 21 00 60 DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9) 0 % 31.12.2016 ex 2933 21 00 70 α-(4-Methoxybenzoyl)-α-(1-benzyl-5-ethoxy-3-hydantoinyl)-2-chloro-5- 0 % 31.12.2016
dodecyloxycarbonylacetanilide, (CAS RN 70950-45-7) ex 2933 21 00 80 5,5-Dimethylhydantoin 0 % 31.12.2015 ex 2933 29 90 40 Triflumizole (ISO) 0 % 31.12.2013 ex 2933 29 90 50 1,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9) 0 % 31.12.2013 ex 2933 29 90 60 1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea, (CAS 0 % 31.12.2016
RN 52378-40-2) ex 2933 39 99 15 Pyridine-2,3-dicarboxylic acid (CAS RN 89-00-9) 0 % 31.12.2013 ex 2933 39 99 20 Copper pyrithione powder (CAS RN 14915-37-8) 0 % 31.12.2014 ex 2933 39 99 24 2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75- 0 % 31.12.2014
3)
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2933 39 99 25 Imazethapyr (ISO) 0 % 31.12.2013 ex 2933 39 99 30 Fluazinam (ISO) (CAS RN 79622-59-6) 0 % 31.12.2014 ex 2933 39 99 32 2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2) 0 % 31.12.2016 ex 2933 39 99 35 Aminopyralid (ISO) (CAS RN 150114-71-9) 0 % 31.12.2013 ex 2933 39 99 37 Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2) 0 % 31.12.2016 ex 2933 39 99 40 2-Chloropyridine (CAS RN 109-09-1) 0 % 31.12.2013 ex 2933 39 99 42 2,2,6,6-Tetramethylpiperidine (CAS RN 768-66-1) 0 % 31.12.2016 ex 2933 39 99 45 5-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole, 0 % 31.12.2014
(CAS RN 102625-64-9) ex 2933 39 99 47 (-)-trans-4-(4’-Fluorophenyl)-3-hydroxymethyl- -methylpiperidine (CAS RN 0 % 31.12.2014
105812-81-5) ex 2933 39 99 48 Flonicamid (ISO) (CAS RN 158062-67-0) 0 % 31.12.2014 ex 2933 39 99 49 2-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]thio]-1H-benzimidazole, 0 % 31.12.2015
(CAS RN 103577-40-8) ex 2933 39 99 50 -Fluoro-2,6-dichloropyridinium tetrafluoroborate (CAS RN 140623-89-8) 0 % 31.12.2016 ex 2933 39 99 55 Pyriproxyfen (ISO) of a purity by weight of 97 % or more (CAS RN 95737-68-1) 0 % 31.12.2014 ex 2933 39 99 60 2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0) 0 % 31.12.2013 ex 2933 39 99 65 Acetamiprid (ISO) (CAS RN 135410-20-7) 0 % 31.12.2013 ex 2933 39 99 75 Picolinafen (ISO) (CAS RN 137641-05-5) 0 % 31.12.2013 ex 2933 39 99 85 2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3) 0 % 31.12.2015 ex 2933 49 10 10 Quinmerac (ISO) (CAS RN 90717-03-6) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2933 49 10 20 3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7) 0 % 31.12.2013 ex 2933 49 90 30 Quinoline (CAS RN 91-22-5) 0 % 31.12.2015 ex 2933 49 90 40 Isoquinoline (CAS RN 119-65-3) 0 % 31.12.2015 ex 2933 49 90 50 Methyl 2-[(S)-3-{(E)-3-[2-(7-chloro-2-quinolyl)vinyl]phenyl}-3-hydroxypropyl] 0 % 31.12.2013
benzoate monohydrate ex 2933 49 90 60 5,6,7,8-Tetrahydroquinoline (CAS RN 10500-57-9) 0 % 31.12.2013 ex 2933 49 90 70 Quinolin-8-ol (CAS RN 148-24-3) 0 % 31.12.2013 ex 2933 52 00 10 Malonylurea (barbituric acid) (CAS RN 67-52-7) 0 % 31.12.2016 ex 2933 59 95 15 (2R)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a] pyrazin-7(8H)- 0 % 31.12.2013
yl]-1-(2,4,5-trifluorophenyl)butyl-2-ammonium phosphate monohydrate ex 2933 59 95 20 2,4-Diamino-6-chloropyrimidine 0 % 31.12.2013 ex 2933 59 95 25 2,5-Diamino-4,6-dihydroxypyrimidine monohydrochloride monohydrate 0 % 31.12.2013 ex 2933 59 95 30 Mepanipyrim (ISO) (CAS RN 110235-47-7) 0 % 31.12.2013 ex 2933 59 95 40 Guanine (CAS RN 73-40-5) 0 % 31.12.2013 ex 2933 59 95 45 1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337- 0 % 31.12.2014
89-1) ex 2933 59 95 50 2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1) 0 % 31.12.2014 ex 2933 59 95 55 Thiopental (INNM) (CAS RN 76-75-5) 0 % 31.12.2014 ex 2933 59 95 60 2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8) 0 % 31.12.2013 ex 2933 59 95 65 1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate), 0 % 31.12.2014
(CAS RN 140681-55-6) ex 2933 59 95 70 -(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422- 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
71-9) ex 2933 59 95 75 (2R,3S/2S,3R)-3-(6-Chloro-5-fluoro pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1H- 0 % 31.12.2014
1,2,4-triazol-1-yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8) ex 2933 69 80 20 1,3,5-Tris[(3,5-di-tert-butyl-4-hydroxyphenyl)methyl]-1,3,5-triazine 0 % 31.12.2013
2,4,6(1H,3H,5H)-trione ex 2933 69 80 25 1,3,5-Triazine-2,4,6-triamine monophosphate (CAS RN 20208-95-1) 0 % 31.12.2016 ex 2933 69 80 30 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5) 0 % 31.12.2014 ex 2933 69 80 35 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, compound with 1,3,5-triazine-2,4,6-triamine 0 % 31.12.2016
(1:1), (CAS RN 37640-57-6) ex 2933 69 80 40 Troclosene sodium (INNM), (CAS RN 2893-78-9) 0 % 31.12.2016 ex 2933 69 80 50 1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9) 0 % 31.12.2013 ex 2933 69 80 55 Terbutryn (ISO) (CAS RN 886-50-0) 0 % 31.12.2015 ex 2933 69 80 60 Cyanuric acid (CAS RN 108-80-5) 0 % 31.12.2015 ex 2933 69 80 65 2-(4,6-Diphenyl-1,3,5-triazin-2-yl)-5-[(hexyl)oxy]-phenol (CAS RN 147315-50-2) 0 % 31.12.2016 ex 2933 69 80 80 Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7) 0 % 31.12.2013 ex 2933 79 00 10 Ezetimibe (INN) (CAS RN 163222-33-1) 0 % 31.12.2013 ex 2933 79 00 30 5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0) 0 % 31.12.2012 ex 2933 79 00 50 6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6) 0 % 31.12.2013 ex 2933 79 00 60 3,3-Pentamethylene-4-butyrolactam (CAS RN 64744-50-9) 0 % 31.12.2014 ex 2933 79 00 70 (S)- -[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)- 0 % 31.12.2015
tartrate, (CAS RN 754186-36-2) ex 2933 99 80 10 2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol (CAS RN 3846-71-7) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2933 99 80 13 5-Difluormethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7) 0 % 31.12.2016 ex 2933 99 80 15 2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1) 0 % 31.12.2013 ex 2933 99 80 20 2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol 0 % 31.12.2013 ex 2933 99 80 25 6,6'-Di-2H-benzotriazol-2-yl-4,4'-bis(1,1,3,3-tetramethylbutyl)-2,2'- 0 % 31.12.2013
methylenediphenol ex 2933 99 80 30 Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3) 0 % 31.12.2013 ex 2933 99 80 32 5-[4’-(Bromomethyl)biphenyl-2-yl]-2-trityl-2H-tetrazole (CAS RN 133051-88-4) 0 % 31.12.2014 ex 2933 99 80 35 1,3,3-Trimethyl-2-methyleneindoline (CAS RN 118-12-7) 0 % 31.12.2014 ex 2933 99 80 37 8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62- 0 % 31.12.2014
-
1)ex 2933 99 80 40 trans-4-Hydroxy-L-proline (CAS RN 51-35-4) 0 % 31.12.2013 ex 2933 99 80 45 Maleic hydrazide (ISO) 0 % 31.12.2013 ex 2933 99 80 50 Metconazole (ISO) (CAS RN 125116-23-6) 3.2 % 31.12.2013 ex 2933 99 80 55 Pyridaben (ISO) (CAS RN 96489-71-3) 0 % 31.12.2014 ex 2933 99 80 60 1,3-Bis(3-isocyanatomethylphenyl)-1,3-diazetidine-2,4-dione (dimeric 2,4-toluene 0 % 31.12.2013
diisocyanate) ex 2933 99 80 64 ((3R)-1-{(1R,2R)-2-[2-(3,4-Dimethoxyphenyl) ethoxy]cyclohexyl}pyrrolidin-3- 0 % 31.12.2015
ol.hydrochloride, (CAS RN 748810-28-8) ex 2933 99 80 65 Candesartan cilexetil (INNM) 0 % 31.12.2013 ex 2933 99 80 70 6,7-Dihydro-5H-cyclopenta[b]pyridine (CAS RN 533-37-9) 0 % 31.12.2013 ex 2933 99 80 71 10-methoxyiminostilbene (CAS RN 4698-11-7) 0 % 31.12.2013 ex 2933 99 80 72 1,4,7-Trimethyl-1,4,7-Triazacyclononane 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2933 99 80 73 5-(acetoacetylamino)benzimidazolone (CAS RN 26576-46-5) 0 % 31.12.2013 ex 2933 99 80 74 Imidazo[1,2-b] pyridazine-hydrochloride (CAS RN 18087-70-2) 0 % 31.12.2013 ex 2933 99 80 76 Manganese(2+), bis(octahydro-1,4,7-trimethyl-1H-1,4,7-triazonine-N1,N4,N7)tri-µ- 0 % 31.12.2013
oxodi-, acetate (1:2) ex 2933 99 80 77 Manganese(2+), bis(octahydro-1,4,7-trimethyl-1H-1,4,7-triazonine-N1,N4,N7)tri-µ- 0 % 31.12.2013
oxodi-, sulphate (1:1) ex 2933 99 80 78 3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7) 0 % 31.12.2013 ex 2933 99 80 81 1,2,3-Benzotriazole (CAS RN 95-14-7) 0 % 31.12.2016 ex 2933 99 80 82 Tolytriazole (CAS RN 29385-43-1) 0 % 31.12.2013 ex 2933 99 80 88 2,6-Dichloroquinoxaline (CAS RN 18671-97-1) 0 % 31.12.2013 ex 2933 99 80 89 Carbendazim (ISO) (CAS RN 10605-21-7) 0 % 31.12.2013 ex 2934 10 00 10 Hexythiazox (ISO) (CAS RN 78587-05-0) 0 % 31.12.2013 ex 2934 10 00 20 2-(4-Methylthiazol-5-yl)ethanol 0 % 31.12.2013 ex 2934 10 00 40 (Z )-2-(2-tert-butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid (CAS RN 86978- 0 % 31.12.2013
24-7) ex 2934 10 00 50 2-(2-Formylaminothiazol-4-yl)acetic acid (CAS RN 75890-68-5) 0 % 31.12.2013 ex 2934 10 00 60 Fosthiazate (ISO) (CAS RN 98886-44-3) 0 % 31.12.2014 ex 2934 10 00 70 2-(Formylamino)-4-thiazoleacetyl chloride, hydrochloride (CAS RN 372092-18-7) 0 % 31.12.2016 ex 2934 10 00 80 3,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0) 0 % 31.12.2016 ex 2934 20 80 10 4-Chloro-1,3-benzothiazol-2(3H)-one 0 % 31.12.2013 ex 2934 20 80 20 S-1,3-Benzothiazol-2-yl (2Z)-(5-amino-1,2,4-thiadiazol-3- 0 % 31.12.2016
yl)(methoxyimino)ethanethioate, (CAS RN 89604-91-1)
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2934 20 80 30 2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2- 0 % 31.12.2016 oxoethylidene]amino]oxy]-acetic acid, methyl ester, (CAS RN 246035-38-1)
ex 2934 20 80 40 1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5) 0 % 31.12.2012 ex 2934 20 80 50 S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2- 0 % 31.12.2013
(acetyloxyimino)thioacetate, (CAS RN 104797-47-9) ex 2934 20 80 60 Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS 0 % 31.12.2015
RN 143183-03-3) ex 2934 20 80 70 , -Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741- 0 % 31.12.2015
80-8) ex 2934 99 90 15 Carboxin (ISO) (CAS RN 5234-68-4) 0 % 31.12.2013 ex 2934 99 90 17 Methyl(1,8-diethyl-1,3,4,9-tetrahydropyrano[3,4-b]indol-1-yl)acetate, (CAS RN 0 % 31.12.2016
122188-02-7) ex 2934 99 90 20 Thiophene (CAS RN 110-02-1) 0 % 31.12.2014 ex 2934 99 90 23 Bromuconazole (ISO) with a purity by weight of 96 % or more, (CAS RN 116255- 0 % 31.12.2016
48-2) ex 2934 99 90 25 2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8) 0 % 31.12.2015 ex 2934 99 90 28 11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride, (CAS RN 111974- 0 % 31.12.2016
74-4) ex 2934 99 90 30 Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7) 0 % 31.12.2014 ex 2934 99 90 33 [2,2’-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel, (CAS RN 14516-71-3) 0 % 31.12.2016 ex 2934 99 90 35 Dimethenamide (ISO) 0 % 31.12.2013 ex 2934 99 90 40 2-Thiophene ethylamine (CAS RN 30433-91-1) 0 % 31.12.2015 ex 2934 99 90 45 Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione 0 % 31.12.2013 ex 2934 99 90 50 10-[1,1’-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium 0 % 31.12.2015
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
hexafluorophosphate, (CAS RN 591773-92-1) ex 2934 99 90 55 Olmesartan medoxomil (INN) 0 % 31.12.2013 ex 2934 99 90 60 DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3) 0 % 31.12.2013 ex 2934 99 90 65 Methyl 3-aminothiophene-2-carboxylate (CAS RN 22288-78-4) 0 % 31.12.2013 ex 2934 99 90 66 Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0) 0 % 31.12.2013 ex 2934 99 90 72 1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione (CAS RN 1672-88-4) 0 % 31.12.2013 ex 2934 99 90 74 2-Isopropylthioxanthone (CAS RN 5495-84-1) 0 % 31.12.2012 ex 2934 99 90 75 (4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4- 0 % 31.12.2016
[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate, (CAS RN 125971-95-1)
ex 2934 99 90 76 2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5) 0 % 31.12.2016 ex 3204 20 00 10 ex 2934 99 90 77 Potassium 5-methyl-1,3,4-oxadiazole-2-carboxylate 0 % 31.12.2016 ex 2934 99 90 78 1,2,4-Thiadiazole-3-acetic acid 5-[(ethoxycarbonyl)amino]- methyl ester (CAS RN 0 % 31.12.2012
150215-07-9) ex 2934 99 90 79 Thiophen-2-ethanol (CAS RN 5402-55-1) 0 % 31.12.2013 ex 2934 99 90 81 2-(5-Amino-1,2,4-thiadiazol-3-yl)-(Z)-2-methoxyiminoacetic acid (CAS RN 72217- 0 % 31.12.2013
12-0) ex 2934 99 90 82 2-Methyl-1-[4-(methylthio)phenyl]-2-morpholinopropan-1-one (CAS RN 71868-10- 0 % 31.12.2013
-
5)ex 2934 99 90 83 Flumioxazin (ISO) of a purity by weight of 96 % or more (CAS RN 103361-09-7) 0 % 31.12.2014 ex 2934 99 90 84 Etoxazole (ISO) of a purity by weight of 94,8 % or more (CAS RN 153233-91-1) 0 % 31.12.2014 ex 2934 99 90 85 N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy 0 % 31.12.2015
anhydride, (CAS RN 126586-91-2)
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2934 99 90 86 Dithianon (ISO) (CAS RN 3347-22-6) 0 % 31.12.2015 ex 2934 99 90 87 2,2’-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4) 0 % 31.12.2015 ex 2935 00 90 15 Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5) 0 % 31.12.2013 ex 2935 00 90 20 Toluenesulphonamides 0 % 31.12.2013 ex 2935 00 90 23 -[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4) 0 % 31.12.2016 ex 2935 00 90 25 Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7) 0 % 31.12.2013 ex 2935 00 90 27 Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2- 0 % 31.12.2016
[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate, (CAS RN 147118-40-9)
ex 2935 00 90 30 Mixture of isomers consisting of -ethyltoluene-2-sulphonamide and -ethyltoluene 0 % 31.12.2014 4-sulphonamide
ex 2935 00 90 35 Chlorsulfuron (ISO) (CAS RN 64902-72-3) 0 % 31.12.2013 ex 2935 00 90 40 Imazosulfuron (ISO), of a purity by weight of 98 % or more (CAS RN 122548-33-8) 0 % 31.12.2015 ex 2935 00 90 42 Penoxsulam (ISO) (CAS RN 219714-96-2) 0 % 31.12.2015 ex 2935 00 90 45 Rimsulfuron (ISO) (CAS RN 122931-48-0) 0 % 31.12.2013 ex 2935 00 90 50 4,4'-Oxydi(benzenesulphonohydrazide) 0 % 31.12.2013 ex 2935 00 90 53 2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4) 0 % 31.12.2014 ex 2935 00 90 55 Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3) 0 % 31.12.2013 ex 2935 00 90 63 Nicosulphuron (ISO), of a purity by weight of 91 % or more (CAS RN 111991-09-4) 0 % 31.12.2014 ex 2935 00 90 65 Tribenuron-methyl (ISO) (CAS RN 101200-48-0) 0 % 31.12.2013 ex 2935 00 90 75 Metsulfuron-methyl (ISO) (CAS RN 74223-64-6) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 2935 00 90 77 [[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1H-pyrrol-1-yl)carbonyl]amino] 0 % 31.12.2014 ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7)
ex 2935 00 90 81 4-Amino- -(4-aminophenyl)benzenesulphonamide (CAS RN 16803-97-7) 0 % 31.12.2013 ex 2935 00 90 82 -(5,7-Dimethoxy[1,2,4]triazolo[1,5-a]pyrimidin-2-yl)-2-methoxy-4- 0 % 31.12.2013
(trifluoromethyl)pyridine-3-sulphonamide, (CAS RN 422556-08-9) ex 2935 00 90 83 3-Amino-N,N-diethyl-4-methoxybenzenesulphonamide (CAS RN 97-35-8) 0 % 31.12.2013 ex 2935 00 90 85 -[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride 0 % 31.12.2013 ex 2935 00 90 86 4-(m-Tolylamino)pyridine-3-sulphonamide 0 % 31.12.2013 ex 2935 00 90 88 N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate 0 % 31.12.2013
monohydrate, (CAS RN 25646-71-3) ex 2935 00 90 89 3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)- , -dimethyl-1,2,4-triazol-1- 0 % 31.12.2016
sulphonamide, (CAS RN 348635-87-0) ex 2938 90 30 10 Ammonium glycyrrhizate (CAS RN 53956-04-0) 0 % 31.12.2015 ex 2938 90 90 10 Hesperidin (CAS RN 520-26-3) 0 % 31.12.2013 ex 2941 20 30 10 Dihydrostreptomycin sulphate (CAS RN 5490-27-7) 0 % 31.12.2016 3201 20 00 Wattle extract 0 % 31.12.2013 ex 3201 90 90 20 Tanning extracts derived from gambier and myrobalan fruits 0 % 31.12.2013 ex 3204 11 00 10 Dye C.I. Disperse Yellow 54 also known as C.I. Solvent Yellow 114 0 % 31.12.2015 ex 3204 11 00 20 Dye C.I. Disperse Yellow 241 0 % 31.12.2015 ex 3204 11 00 30 Preparation of dispersion dyes, containing: 0 % 31.12.2015
— C.I. Disperse Orange 61, — C.I. Disperse Blue 291:1, — C.I. Disperse Violet 93:1,
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— C.I. Disperse Red 54
ex 3204 11 00 40 Dye C.I. Disperse Red 60 0 % 31.12.2016 ex 3204 11 00 50 Dye C.I. Disperse Blue 72 0 % 31.12.2016 ex 3204 11 00 60 Dye C.I. Disperse Blue 359 0 % 31.12.2016 ex 3204 13 00 10 Dye C.I. Basic Red 1 0 % 31.12.2016 ex 3204 15 00 10 Dye C.I. Vat Orange 7 (C.I. Pigment Orange 43) 0 % 31.12.2012 ex 3204 15 00 60 Dyestuff C.I. Vat Blue 4 0 % 31.12.2013 ex 3204 17 00 10 Dye C.I. Pigment Yellow 81 0 % 31.12.2013 ex 3204 17 00 30 Dye C.I. Pigment Yellow 97 0 % 31.12.2012 ex 3204 17 00 40 Dye C.I. Pigment Yellow 120 0 % 31.12.2014 ex 3204 17 00 50 Dye C.I. Pigment Yellow 180 0 % 31.12.2014 ex 3204 17 00 55 Dye C.I. Pigment Red 169 0 % 31.12.2016 ex 3204 17 00 60 Dye C.I. Pigment Red 53:1 0 % 31.12.2016 ex 3204 17 00 65 Dye C.I. Pigment Red 53 0 % 31.12.2016 ex 3204 17 00 70 Dye C.I. Pigment Yellow 13 0 % 31.12.2016 ex 3204 17 00 75 Dye C.I. Pigment Red 2 0 % 31.12.2016 ex 3204 19 00 11 Photochromic dye, 3-(4-butoxyphenyl-6,7-dimethoxy-3-(4-methoxyphenyl)-13,13- 0 % 31.12.2014
dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile ex 3204 19 00 15 4-{4-[3-(4-Methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1- 0 % 31.12.2013
f]chromen-3-yl]phenyl}morpholine
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3204 19 00 21 Photochromic dye, 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13- 0 % 31.12.2014 dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-7-
yl)morpholine ex 3204 19 00 25 Cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate 0 % 31.12.2013 ex 3204 19 00 31 Photochromic dye, -hexyl -6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13- 0 % 31.12.2014
dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carboxamide ex 3204 19 00 41 Photochromic dye, 4,4’-(13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1- 0 % 31.12.2014
f]chromene-3,3-diyl)diphenol ex 3204 19 00 51 Photochromic dye, 4-(4-(6,11-difluoro-13,13-dimethyl-3-phenyl-3,13- 0 % 31.12.2014
dihydrobenzo[h]indeno[2,1-f ]chromen-3-yl)phenyl)morpholine ex 3204 19 00 61 Photochromic dye, 3-(4-butoxyphenyl)-6,7-dimethoxy-3-(4-methoxyphenyl)-13,13- 0 % 31.12.2014
dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f ]chromene ex 3204 19 00 65 6-Methoxy-7-morpholino-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13- 0 % 31.12.2013
dihydrobenzo[h]indeno[2,1-f]chromene ex 3204 19 00 70 Dye C.I. Solvent Red 49 0 % 31.12.2013 ex 3204 19 00 71 Dye C.I. Solvent Brown 53 0 % 31.12.2015 ex 3204 19 00 72 Dye C.I. Solvent Yellow 93 0 % 31.12.2015 ex 3204 19 00 73 Dye C.I. Solvent Blue 104 0 % 31.12.2015 ex 3204 19 00 75 6,7-Dimethoxy-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13- 0 % 31.12.2013
dihydrobenzo[h]indeno[2,1-f]chromene ex 3204 19 00 77 Dye C.I. Solvent Yellow 98 0 % 31.12.2016 ex 3204 19 00 80 ((R) and (S) isomers of 6,7-Dimethoxy-13-ethyl-13-[2-(2-methoxyethoxy)-ethoxy]-3- 0 % 31.12.2013
(4-methoxyphenyl)-3-(4-fluorophenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene ex 3204 19 00 81 6,11-Difluoro-3,3-di-(4-methoxyphenyl)-13,13-dimethyl-3,13- 0 % 31.12.2013
dihydrobenzo[h]indeno[2,1-f]chromene ex 3204 19 00 82 3-(4-Fluorophenyl)-3-(4-piperidinophenyl)-13,13-dimethyl-3,13- 0 % 31.12.2013
dihydrobenzo[h]indeno[2,1-f]chromene
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3204 19 00 83 6,7-Dimethoxy-11-cyano-3,3-di-(4-methoxyphenyl)-13,13-dimethyl-3,13- 0 % 31.12.2013 dihydrobenzo[h]indeno[2,1-f]chromene
ex 3205 00 00 10 Aluminium lakes prepared from dyes for use in the manufacture of pigments for the 0 % 31.12.2013 pharmaceutical industry(1)
ex 3206 11 00 10 Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 0 % 31.12.2013 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate
ex 3206 11 00 20 Rutile titanium dioxide, containing by weight: 0 % 31.12.2016 — 90 % or more of titanium dioxide,
— not more than 4 % of aluminium hydroxide, — not more than 6 % of silicon dioxide
ex 3206 42 00 10 Lithopone 0 % 31.12.2013 3206 50 00 Inorganic products of a kind used as luminophores 0 % 31.12.2013 ex 3207 30 00 10 Preparation containing : 0 % 31.12.2013
— not more than 85 % by weight of silver, — not less than 2 % by weight of palladium, — barium titanate, — terpineol, and — ethyl cellulose, used for screen printing in the manufacture of multilayer ceramic capacitors(1)
ex 3207 40 85 20 Glass flakes coated with silver, of an average diameter of 40 (± 10) µm 0 % 31.12.2013 ex 3207 40 85 30 Glass frit, for use in the manufacture of cathode-ray tubes(1) 0 % 31.12.2013 ex 3208 10 90 10 Anti-reflection coating, consisting of an ester based polymer modified with a 0 % 31.12.2013
chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-
ex 3707 90 90 60 methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by
weight not more than 10 % of polymer
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3208 20 10 10 Copolymer of -vinylcaprolactam, -vinyl-2-pyrrolidone and dimethylaminoethyl 0 % 31.12.2013 methacrylate, in the form of a solution in ethanol containing by weight 34 % or more
but not more than 40 % of copolymer ex 3208 20 10 20 Immersion topcoat solution containing by weight 0,5 % or more but not more than 0 % 31.12.2013
15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether
ex 3208 90 19 10 Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or 0 % 31.12.2013 isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and
butanol, isopropanol or isopropanol and butanol ex 3208 90 19 15 Modified, chlorinated polyolefins, whether or not in a solution or dispersion 0 % 31.12.2013 ex 3902 90 90 94 ex 3208 90 19 40 Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, 0 % 31.12.2013
ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane
ex 3208 90 19 50 Solution containing by weight: 0 % 31.12.2013 — (65 ± 10) % of γ-butyrolactone,
— (30 ± 10) % of polyamide resin, — (3,5 ± 1,5) % of naphthoquinone ester derivative and — (1,5 ± 0,5) % of arylsilicic acid
ex 3208 90 19 60 Copolymer of hydroxystyrene with one or more of the following: 0 % 31.12.2016 — styrene
— alkoxystyrene — alkylacrylates dissolved in ethyl lactate
ex 3208 90 19 75 Acenaphthalene copolymer in ethyl lactate solution 0 % 31.12.2012 ex 3208 90 19 85 Mixture containing by weight : 0 % 31.12.2013
— 30-45 % polyamide resin, — 2-10 % diazonaphthoquinone,
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— 50-65 % γ-butyrolactone
ex 3208 90 91 10 Preparation on the basis of polyhydroxyamide containing at least naphthoquinone 0 % 31.12.2012 ester derivate or tosylate dissolved in γ-butyrolactone and/or 2-methoxy-1-
methylethyl acetate ex 3208 90 99 10 Solution based on chemically modified natural polymers, containing two or more of 0 % 31.12.2013
the following dyes: — methyl 8’-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole 2,3’-naphtho[2,1-b][1,4]oxazine]-9’-carboxylate, — methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5- carboxylate, — 13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13- dihydrobenzo[h]indeno[2,1-f]chromen-13-ol, — ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5- carboxylate, — 13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13- dihydrobenzo[h]indeno[2,1-f]chromen-13-ol
ex 3208 90 99 20 Solution based on chemically modified natural polymers, containing two or more of 0 % 31.12.2013 the following dyes:
— 4-[4-(13,13-dimethyl-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1- f]chromen-3-yl)phenyl]morpholine, — 4-{4-[3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine, — cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate, — ethoxycarbonylmethyl 6-acetoxy-2,2-diphenyl-2H-benzo[h]chromene-5- carboxylate, — 2-pentyl-7,7-diphenylbenzo[h]chromeno[6,5-d]-1,3-dioxin-4(7H)-one, — 13-butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13- dihydrobenzo [h]indeno[2,1-f]chromene, — 3-(4-methoxyphenyl)-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromene, — 6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13- dihydrobenzo [h]indeno[2,1-f]chromene
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3215 11 00 10 Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and 0 % 31.12.2013 colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl
ex 3215 19 00 10 acrylate copolymer and colour pigments
ex 3215 90 00 10 Ink formulation, for use in the manufacture of ink-jet cartridges(1) 0 % 31.12.2013 ex 3215 90 00 20 Heat sensitive ink fixed on a plastic film 0 % 31.12.2013 ex 3215 90 00 30 Disposable cartridge ink, containing by weight 0 % 31.12.2013
— 5 % or more, but not more than 10 % of amorphous silicon dioxide or — 3,8 % or more of dye C.I. Solvent Black 7 in organic solvents for use in the marking of integrated circuits (1)
ex 3215 90 00 40 Dry ink powder with a base of hybrid resin (made from polystyrene acrilyc resin and 0 % 31.12.2015 polyester resin) mixed with:
— wax; — a vinyl-based polymer and — a colouring agent for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices (1)
3301 12 10 Essential oil of orange, not deterpenated 0 % 31.12.2013 ex 3402 11 90 10 Sodium lauroyl methyl isethionate 0 % 31.12.2015 ex 3402 13 00 10 Vinyl copolymer surface active agent based on polypropylene glycol 0 % 31.12.2013 ex 3402 13 00 20 Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, 0 % 31.12.2012
polymerized with oxirane, methyl terminated ex 3402 90 10 20 Mixture of docusate sodium (INN) and sodium benzoate 0 % 31.12.2013 ex 3402 90 10 30 Surface-active preparation, consisting of a mixture of sodium docusate and 0 % 31.12.2015
ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3402 90 10 40 Amphoteric fluorinated surfactant in a mixture of water and ethanol, containing by 0 % 31.12.2013 weight 25 % or more but not more than 30 % surfactant
ex 3402 90 10 50 Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene 0 % 31.12.2015 glycol)
ex 3402 90 10 60 Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane 0 % 31.12.2014 ex 3402 90 10 70 Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7- 0 % 31.12.2014
diol ex 3403 99 00 10 Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides 0 % 31.12.2013 ex 3504 00 90 10 Avidin (CAS RN 1405-69-2) 0 % 31.12.2014 ex 3505 10 50 20 O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch 0 % 31.12.2013 ex 3506 91 00 10 Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a 0 % 31.12.2013
copolymer of ethylene and vinyl acetate (EVA) ex 3506 91 00 30 Two component microencapsulated epoxy adhesive dispersed in a solvent 0 % 31.12.2013 ex 3506 91 00 40 Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but 0 % 31.12.2014
not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more
than 132 cm supplied on a release liner with an initial peel adhesion release value of
not less than 15 N/25 mm (measured according to ASTM D3330)
ex 3601 00 00 10 Pyrotechnical powder in the form of granulate of cylindrical shape, composed of 0 % 31.12.2016
strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and
additives, used as a component of airbag inflators(1)
ex 3701 30 00 10 Relief printing plate, of a kind used for printing on newsprint, consisting of a metal 0 % 31.12.2013
substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not
more than 0,8 mm, not covered with a release film, of a total thickness of not more
than 1 mm
ex 3701 30 00 20 Photosensitive plate consisting of a photopolymer layer on a polyester foil of a total 0 % 31.12.2014
thickness of more than 0,43 mm but not more than 3,18 mm
ex 3701 99 00 10 Plate of quartz or of glass, covered with a film of chromium and coated with a 0 % 31.12.2013
photosensitive or electron-sensitive resin, for the manufacture of masks for the goods
of heading No 8541 or 8542(1)
ex 3705 90 90 10 Photomasks for photographically transferring circuit diagram patterns onto 0 % 31.12.2014
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
semiconductor wafers ex 3707 10 00 10 Photosensitive emulsion for the sensitization of silicon discs(1) 0 % 31.12.2013 ex 3707 10 00 15 Sensitising emulsion consisting of: 0 % 31.12.2013
— by weight not more than 12 % of diazooxonapthtalenesulphonic acid ester — phenolic resins in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone
ex 3707 10 00 25 Sensitising emulsion containing: 0 % 31.12.2013 — phenolic or acrylic resins
— a maximum 2 % by weight of light sensitive acid precursor, in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate
ex 3707 10 00 30 Preparation based on photosensitive acrylic containing polymer, containing colour 0 % 31.12.2013 pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not
containing ethyl-3-ethoxypropionate ex 3707 10 00 35 Sensitising emulsion or preparation containing one or more of: 0 % 31.12.2016 ex 3707 90 90 70 — acrylate polymers,
— methacrylate polymers, — derivatives of styrene polymers, containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate
ex 3707 10 00 40 Sensitising emulsion, containing: 0 % 31.12.2016 — not more than 10 % by weight of naphthoquinonediazide esters,
— 2 % or more but not more than 20 % by weight of copolymers of hydroxystyrene — not more than 7 % by weight of epoxy-containing derivatives dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate
ex 3707 10 00 45 Photosensitive emulsion consisting of cyclized polyisoprene containing: 0 % 31.12.2014
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— 55 % or more but not more than 75 % by weight of xylene and — 12 % or more but not more than 18 % by weight of ethylbenzene
ex 3707 10 00 50 Photosensitive emulsion containing by weight: 0 % 31.12.2014 — 20 % or more but not more than 45 % of copolymers of acrylates
and/or methacrylates and hydroxystyrene derivatives, — 25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate, — 5 % or more but not more than 30 % of acrylates, — not more than 12 % of a photoinitiator
ex 3707 90 20 10 Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl 0 % 31.12.2013 acrylate and either magnetite or carbon black, for use as a developer in the
manufacture of cartridges for facsimile machines, computer printers or copiers(1) ex 3707 90 20 20 Dry ink powder or toner blend, based on a polyol resin, for use as a developer in the 0 % 31.12.2013
manufacture of cartridges for facsimile machines, computer printers or copiers(1) ex 3707 90 20 40 Dry ink powder or toner blend, based on a polyester resin, manufactured by a 0 % 31.12.2013
polymerisation process, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1)
ex 3707 90 90 10 Anti-reflection coating, consisting of a modified methacrylic polymer, containing by 0 % 31.12.2013 weight not more than 10 % of polymer, in the form of a solution in 2-methoxy-1-
methylethyl acetate and 1-methoxypropan-2-ol ex 3707 90 90 30 Anti-reflection coating, in the form of an aqueous solution, containing by weight: 0 % 31.12.2013 ex 3824 90 97 91 — not more than 2 % of perhalogenated sulphonic acid derivatives,
— not more than 1 % of a vinyl polymer
ex 3707 90 90 40 Anti reflection coating, in the form of an aqueous solution, containing by weight not 0 % 31.12.2014 more than:
EN 58 EN
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— 5 % of a fluorinated polymer
ex 3707 90 90 80 Anti-reflection coating, consisting of either a siloxane polymer or an organic polymer 0 % 31.12.2015 having a phenolic hydroxy group modified with a chromophore group, in the form of
a solution of an organic solvent containing either 1-ethoxy-2-propanol or 2-methoxy 1-methylethyl acetate containing by weight not more than 10 % of polymer
ex 3707 90 90 85 Rolls, containing: 0 % 31.12.2014 — a dry layer of a photosensitive acrylic resin,
— on one side a poly(ethylene terephthalate) protecting foil and — on the other side a polyethylene protecting foil
ex 3801 20 90 10 Colloidal graphite in suspension in water, for use as internal coating in colour 0 % 31.12.2013 cathode-ray tubes(1)
3805 90 10 Pine oil 1.7 % 31.12.2013 ex 3806 10 00 20 Rosin modified phenolic resin, 0 % 31.12.2016
— containing 60 % or more but not more than 75 % by weight of rosin, — with an acid value of not more than 25, of a kind used in offset printing
ex 3808 91 90 10 Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide 0 % 31.12.2013 ex 3808 91 90 30 Preparation containing endospores or spores and protein crystals derived from either: 0 % 31.12.2014
— Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or, — Bacillus thuringiensis subsp. kurstaki or, — Bacillus thuringiensis subsp. israelensis or, — Bacillus thuringiensis subsp. aizawai or, — Bacillus thuringiensis subsp. tenebrionis
ex 3808 91 90 40 Spinosad (ISO) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3808 91 90 50 Spodoptera exigua nuclear polyhedrosis virus (SeNPV) in an aqueous glycerol 0 % 31.12.2013 suspension
ex 3808 92 90 10 Fungicide in the form of a powder, containing by weight 65 % or more but not more 0 % 31.12.2013 than 75 % of hymexazole (ISO), not put up for retail sale
ex 3808 92 90 30 Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing 0 % 31.12.2013 by weight:
— 24 % or more but not more than 26 % of pyrithione zinc (INN), or — 39 % or more but not more than 41 % of pyrithione zinc (INN)
ex 3808 92 90 50 Preparations based on copper pyrithione 0 % 31.12.2014 ex 3808 93 15 10 Preparation based on a concentrate containing by weight 45 % or more but not more 0 % 31.12.2012
than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension ex 3808 93 23 10 Herbicide containing flazasulfuron (ISO) as an active ingredient 0 % 31.12.2014 ex 3808 93 27 20 Organic solution of Clethodim (ISO), with a Clethodim content of 37 % (± 2 %) or 0 % 31.12.2012
70 % (± 2 %) by weight ex 3808 93 27 40 Preparation, consisting of a suspension of Tepraloxydim (ISO), containing by weight: 0 % 31.12.2016
— 30 % or more of Tepraloxydim (ISO) and — not more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons
ex 3808 93 90 10 Preparation, in the form of granules, containing by weight: 0 % 31.12.2014 — 38,8 % or more but not more than 41,2 % of Gibberellin A3, or
— 9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7
ex 3808 93 90 20 Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by 0 % 31.12.2015 weight:
— 1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine of a kind used in plant growth regulators
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3808 93 90 30 Aqueous solution containing by weight: 0 % 31.12.2015 — 1,8 % of sodium para-nitrophenolate,
— 1,2 % of sodium ortho-nitrophenolate, — 0,6 % of sodium 5-nitroguaiacolate for use in the manufacture of a plant growth regulator (1)
ex 3808 93 90 40 Mixed white powder containing by weight: 0 % 31.12.2015 — 3 % or more but not more than 3,6 % of 1-methylcyclopropene with a
purity more than 96 % and — containing less than 0,05 % of each impurity of 1-chloro-2-methylpropene and 3-chloro-2-methylpropene for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator (1)
ex 3808 93 90 50 Preparation in the form of powder, containing by weight: 0 % 31.12.2015 — 55 % or more of Gibberellin A4,
— 1 % or more but not more than 35 % of Gibberellin A7, — 90 % or more of Gibberellin A4 and Gibberellin A7 combined — not more than 10 % of a combination of water and other naturally occurring Gibberellins of a kind used in plant growth regulators
ex 3808 99 90 10 Oxamyl (ISO) in a solution of cyclohexanone and water 0 % 31.12.2015
ex 3809 91 00 10 Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ 5 -dioxaphosphoran-5-ylmethyl methyl 0 % 31.12.2013 methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ 5 -dioxaphosphoran-5-
ylmethyl) methylphosphonate ex 3809 92 00 10 Paper anti-fading agent, consisting of a mixture of magnesium trisilicate and 0 % 31.12.2013
monosodium salt of 2,2’-methylenebis(4,6-di-tert-butylphenyl) phosphate ex 3809 92 00 20 Defoamer, consisting of a mixture of oxydipropanol and 2,5,8,11-tetramethyldodec 0 % 31.12.2014
6-yn-5,8-diol ex 3810 10 00 10 Soldering paste, consisting of a mixture of metals and resin containing by weight: 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— 70 % or more, but not more than 90 % of tin — not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium for use in the electro technical industry(1)
ex 3811 19 00 10 Solution of more than 61 % but not more than 63 % by weight of 0 % 31.12.2013 methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent,
containing by weight not more than: — 4,9 % of 1,2,4-trimethyl-benzene, — 4,9 % of naphthalene, and — 0,5 % of 1,3,5-trimethyl-benzene
ex 3811 21 00 10 Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils 0 % 31.12.2013 ex 3811 21 00 20 Additives for lubricating oils, based on complex organic molybdenum compounds, in 0 % 31.12.2013
the form of a solution in mineral oil ex 3811 90 00 10 Dinonylnaphthylsulphonic acid salt, in a mineral oil solution 0 % 31.12.2013 ex 3812 10 00 10 Rubber accelerator based on diphenyl guanidine granules 0 % 31.12.2016 ex 3812 30 80 20 Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) 0 % 31.12.2013
sebacate ex 3812 30 80 30 Compound stabilisers containing by weight 15 % or more but not more than 40 % of 0 % 31.12.2013
sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol ex 3812 30 80 40 Mixture of: 0 % 31.12.2013
— 80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8- oxa-3,5-dithia-4-stannatetradecanoate, and — 20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2- ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4- stannatetradecanoate
ex 3812 30 80 50 Preparation consisting of poly-{[6-[(1,1,3,3-tetramethylbutyl)-imino]-1,3,5-triazine 0 % 31.12.2016 2,4-diyl][2-(2,2,6,6-tetramethylpiperidyl)-amino]-hexamethylene-[4-(2,2,6,6-
tetramethylpiperidyl)-imino]}, (CAS RN 71878-19-8) with an average chain length of less than 5 monomer units, and poly-(N-hydroxyethyl-2,2,6,6-tetramethyl-4-
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
hydroxy-piperidyl succinate), (CAS RN 65447-77-0) ex 3814 00 90 20 Mixture containing by weight: 0 % 31.12.2013
— 69 % or more but not more than 71 % of 1-methoxypropan-2-ol, — 29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate
ex 3814 00 90 40 Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or 0 % 31.12.2013 nonafluorobutyl ethyl ether
ex 3815 12 00 10 Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more 0 % 31.12.2013 than 10 mm, consisting of silver on an aluminium oxide support and containing by
weight 8 % or more but not more than 40 % of silver ex 3815 12 00 20 Carbon supported platinum catalyst powder, containing by weight 9,5 % or more but 0 % 31.12.2015
not more than 10,5 % of platinum, for use as a fuel cell catalyst(1) ex 3815 12 00 30 Carbon supported platinum alloy catalyst, containing by weight 11 % or more but not 0 % 31.12.2015
more than 12,6 % of platinum, for use as a fuel cell catalyst(1) ex 3815 19 90 10 Catalyst, consisting of chromium trioxide or dichromium trioxide fixed on a support 0 % 31.12.2013
of silicon dioxide, of a pore volume, as determined by the nitrogen absorption
method, of 2 cm 3 /g or more
ex 3815 19 90 15 Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a 0 % 31.12.2013 support of silicon dioxide, containing by weight 20 % or more but not more than
40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile(1)
ex 3815 19 90 30 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for 0 % 31.12.2013 use in the manufacture of polypropylene(1)
ex 3815 19 90 40 Catalyst, in the form of spheres of a diameter of 4,2 mm or more but not more than 0 % 31.12.2013 9 mm, consisting of a mixture of metals oxides containing predominantly oxides of
molybdenum, vanadium and copper, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid(1)
ex 3815 19 90 41 Catalysts in the form of tablets, consisting of 60 % (± 2 %) by weight of copper oxide 0 % 31.12.2012 on a support of aluminium oxide
ex 3815 19 90 50 Catalyst consisting of organo-metallic compounds of titanium, magnesium and 0 % 31.12.2013 aluminium on a support of silicon dioxide, in the form of a suspension in
tetrahydrofuran
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3815 19 90 60 Catalyst consisting of dichromium trioxide, fixed on a support of aluminium oxide 0 % 31.12.2013 ex 3815 19 90 65 Catalyst consisting of phosphoric acid chemically bonded to a support of silicon 0 % 31.12.2013
dioxide ex 3815 19 90 70 Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed 0 % 31.12.2013
on a support of silicon dioxide ex 3815 19 90 75 Catalyst consisting of organo-metallic compounds of aluminium and chromium, 0 % 31.12.2013
fixed on a support of silicon dioxide ex 3815 19 90 80 Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed 0 % 31.12.2013
on a support of silicon dioxide, in the form of a suspension in mineral oil ex 3815 19 90 85 Catalyst consisting of organo-metallic compounds of aluminium, magnesium and 0 % 31.12.2013
titanium, fixed on a support of silicon dioxide, in the form of powder ex 3815 19 90 86 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for 0 % 31.12.2013
use in the manufacture of polyolefins(1) ex 3815 90 90 16 Initiator based on dimethylaminopropyl urea 0 % 31.12.2012 ex 3815 90 90 20 Catalyst, in powder form, consisting of a mixture of titanium trichloride and 0 % 31.12.2013
aluminium chloride, containing by weight: — 20 % or more but not more than 30 % of titanium and — 55 % or more but not more than 72 % of chlorine
ex 3815 90 90 30 Catalyst, consisting of a suspension in mineral oil of: 0 % 31.12.2015 — tetrahydrofuran complexes of magnesium chloride and titanium(III)
chloride; and — silicon dioxide — containing 6,6 % (± 0,6 %) by weight of magnesium, and — containing 2,3 % (± 0,2 %) by weight of titanium
ex 3815 90 90 50 Catalyst containing titanium trichloride, in the form of a suspension in hexane or 0 % 31.12.2013 heptane containing by weight, in the hexane- or heptane-free material, 9 % or more
but not more than 30 % of titanium
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3815 90 90 70 Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate 0 % 31.12.2013 and dipropylene glycols
ex 3815 90 90 71 Catalyst, containing -(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2- 0 % 31.12.2016 ethyl hexanoate, dissolved in ethane-1,2-diol
ex 3815 90 90 77 Catalyst powder in an aqueous suspension containing by weight: 0 % 31.12.2013 — 1 % or more but not more than 3 % of palladium,
— 0,25 % or more but not more than 3 % of lead, — 0,25 % or more but not more than 0,5 % of lead hydroxide, — 5,5 % or more but not more than 10 % of aluminium, — 4 % or more but not more than 10 % of magnesium, — 30 % or more but not more than 50 % of silicon dioxide
ex 3815 90 90 80 Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form 0 % 31.12.2013 of a solution in isobutanol
ex 3815 90 90 81 Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy 0 % 31.12.2013 1-methylethyl)trimethylammonium 2-ethylhexanoate
ex 3815 90 90 84 Powder catalyst containing by weight a minimum 96 % of oxides of copper, 0 % 31.12.2013 chromium and iron
ex 3815 90 90 85 Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic 0 % 31.12.2012 hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the
oligomerization of olefins(1) ex 3815 90 90 86 Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing 0 % 31.12.2013
by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide
ex 3815 90 90 87 Reaction initiator, consisting of diisopropyl peroxydicarbonate, in the form of a 0 % 31.12.2013 solution in diallyl 2,2’-oxydiethyl dicarbonate
ex 3815 90 90 88 Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by 0 % 31.12.2013 weight on an oil- and hexane-free basis:
— 4 % or more but not more than 10 % of titanium and
EN 65 EN
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3815 90 90 89 Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a 0 % 31.12.2016 polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide
by the hydration of acrylonitrile(1) ex 3817 00 50 10 Mixture of alkylbenzenes (C14-26) containing by weight: 0 % 31.12.2013
— 35 % or more but not more than 60 % of eicosylbenzene, — 25 % or more but not more than 50 % of docosylbenzene, — 5 % or more but not more than 25 % of tetracosylbenzene
ex 3817 00 80 10 Mixture of alkylnaphthalenes, containing by weight: 0 % 31.12.2013 — 88 % or more but not more than 98 % of hexadecylnaphthalene
— 2 % or more but not more than 12 % of dihexadecylnaphthalene
ex 3817 00 80 20 Mixture of branched alkyl benzenes mainly containing dodecyl benzenes 0 % 31.12.2013 ex 3819 00 00 20 Fire resistant hydraulic fluid based on phosphate ester 0 % 31.12.2013 ex 3824 90 15 10 Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing 0 % 31.12.2013
by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets
ex 3824 90 97 05 Mixture of methylmethacrylate monomer and butylacrylate monomer in a solution of 0 % 31.12.2014 xylene and butylacetate, containing by weight more than 54 % but not more than
56 % of solvents ex 3824 90 97 06 Paraffin with a level of chlorination of 70 % or more 0 % 31.12.2014 ex 3824 90 97 07 Film containing oxides of barium or calcium combined with either oxides of titanium 0 % 31.12.2014
or zirconium, in an acrylic binding material ex 3824 90 97 08 Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by 0 % 31.12.2014
weight 56 % or more but not more than 80 % of divinylbenzene ex 3824 90 97 09 Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, 0 % 31.12.2013
either:
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— on a support of mineral wax, whether or not modified chemically, or — in the form of a solution in an organic solvent
ex 3824 90 97 10 Calcined bauxite (refractory grade) 0 % 31.12.2013 ex 3824 90 97 11 Mixture of phytosterols, not in powder form, containing by weight: 0 % 31.12.2014
— 40 % or more, but not more than 58 % of beta-sitosterols — 20 % or more, but not more than 28 % of campesterols — 14 % or more, but not more than 23 % of stigmasterols — 0 % or more, but not more than 15 % of other sterols
ex 3824 90 97 12 Oligomer of tetrafluoroethylene, having one iodoethyl end-group 0 % 31.12.2013 ex 3824 90 97 13 Preparations containing not less than 92 % but not more than 96,5 % by weight of 0 % 31.12.2016
1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate
ex 3824 90 97 14 Calcium phosphonate phenate, dissolved in mineral oil 0 % 31.12.2016 ex 3824 90 97 15 Structured silica alumina phosphate 0 % 31.12.2013 ex 3824 90 97 16 Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, 0 % 31.12.2013
diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3- phenoxycarbonylamino-tolyl)-urea
ex 3824 90 97 17 Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more 0 % 31.12.2013 but not more than 90 %
ex 3824 90 97 20 Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7- 0 % 31.12.2013 methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by
weight 7 % or more of tricyclopentadiene, and: — either an aluminium-alkyl compound, — or an organic complex of tungsten — or an organic complex of molybdenum
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3824 90 97 21 Mixture of 2-propenoic acid, (1-methylethylidene)bis(4,1-phenyleneoxy-2,1- 0 % 31.12.2014 ethanediyloxy-2,1-ethanediyl)ester with 2-propenoic acid, (2,4,6-trioxo-1,3,5-
triazine-1,3,5(2H,4H,6H)-triyl)tri-2,1-ethanediyl ester and 1-hydroxy-cyclohexylphenyl ketone in the solution of methyl ethyl ketone and toluene
ex 3824 90 97 22 Preparations containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene 0 % 31.12.2016 D-glucitol
ex 3824 90 97 23 Mixture of urethane acrylates, tripropylene glycoldiacrylate, ethoxylated bisphenol A 0 % 31.12.2014 acrylate and poly(ethyleneglycol) 400 diacrylate
ex 3824 90 97 24 Solution of (chloromethyl)bis(4-fluorophenyl)methylsilane of a nominal 0 % 31.12.2015 concentration of 65 % in toluene
ex 3824 90 97 25 Lithium tantalate wafers, undoped 0 % 31.12.2013 ex 3824 90 97 27 Preparation, consisting of a mixture of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and 0 % 31.12.2015
propan-2-ol ex 3824 90 97 28 Preparation containing by weight: 0 % 31.12.2015
— 85 % or more but not more than 95 % of α-4-(2-cyano-2- butoxycarbonyl)vinyl-2-methoxy-phenyl-ω-hydroxyhexa(oxyethylene), and — 5 % or more but not more than 15 % of polyoxyethylene (20) sorbitan monopalmitate
ex 3824 90 97 29 Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium 0 % 31.12.2013 salts, for the manufacture of electrolytic capacitors(1)
ex 3824 90 97 30 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated 0 % 31.12.2013 ex 3824 90 97 34 Mixture of phytosterols in the form of a crystalline waxy powder, containing by 0 % 31.12.2013
weight: — 36 % or more, but not more than 79 % of sitosterols, — 15 % or more, but not more than 34 % of sitostanols, — 4 % or more, but not more than 25 % of campesterols, — 0 % or more, but not more than 14 % of campestanols
ex 3824 90 97 36 Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate 0 % 31.12.2012
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3824 90 97 37 Liquid crystal mixture for use in the manufacture of displays(1) 0 % 31.12.2012 ex 3824 90 97 38 Alkyl carbonate-based preparation, also containing a UV absorber, for use in the 0 % 31.12.2012
manufacture of spectacle lenses(1) ex 3824 90 97 39 Mixture containing by weight 40 % or more but not more than 50 % of 2- 0 % 31.12.2013
hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid
ex 3824 90 97 40 Azelaic acid of a purity by weight of 75 % or more but not more than 85 % 0 % 31.12.2013 ex 3824 90 97 42 Mixed metals oxides, in the form of powder, containing by weight: 0 % 31.12.2013
— either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium, — or 30 % or more of lead and 5 % or more of niobium, for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors(1)
ex 3824 90 97 44 Mixture of phytosterols, not in the form of powder, containing by weight: 0 % 31.12.2012 — 75 % or more of sterols,
— not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters (1)
ex 3824 90 97 45 Preparations consisting predominantly of ethylene glycol and: 0 % 31.12.2013 — either diethylene glycol, dodecandioic acid and ammonia water,
— or N,N-dimethylformamide, — or γ-butyrolactone, — or silicon oxide, — or ammonium hydrogen azelate, — or ammonium hydrogen azelate and silicon oxide, — or dodecandioic acid, ammonia water and silicon oxide, for the manufacture of electrolytic capacitors(1)
ex 3824 90 97 46 Carboxylic acid anhydride based hardener for epoxide resin, in liquid form, of a 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
specific weight at 25 ºC of 1,15 g/cm 3 or more but not more than 1,20 g/cm 3
ex 3824 90 97 47 4-Methoxysalicylaldehyde, dissolved in -methyl pyrrolidone 0 % 31.12.2012
ex 3824 90 97 52 Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average 0 % 31.12.2013
polymer chain length of less than 5 monomer units
ex 3824 90 97 53 Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain 0 % 31.12.2013
length of less than 5 monomer units
ex 3824 90 97 54 2-Hydroxybenzonitrile, in the form of a solution in , -dimethylformamide, 0 % 31.12.2013
containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile
ex 3824 90 97 58 N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy 0 % 31.12.2015
anhydride in a solution of dichloromethane at 37 %
ex 3824 90 97 59 3’,4’,5’-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by 0 % 31.12.2015
weight 80 % or more but not more than 90 % of 3’,4’,5’-trifluorobiphenyl-2-amine
ex 3824 90 97 60 α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) 0 % 31.12.2013
isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]
ex 3824 90 97 62 Fused magnesia containing by weight 15 % or more of dichromium trioxide 0 % 31.12.2016
ex 3824 90 97 63 Triethylborane, in the form of a solution in tetrahydrofuran 0 % 31.12.2013
ex 3824 90 97 64 Aluminium sodium silicate, in the form of spheres of a diameter of: 0 % 31.12.2013
— either 1,6 mm or more but not more than 3,4 mm,
— or 4 mm or more but not more than 6 mm
ex 3824 90 97 65 Preparation containing by weight: 0 % 31.12.2016 — 89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-
[(4-propylphenyl)methylene]-nonitol — 0,1 % or more but not more than 1 % of colorants
EN 70 EN
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3824 90 97 66 Mixture of primary tert-alkylamines 0 % 31.12.2014 ex 3824 90 97 70 Paste containing by weight 75 % or more, but not more than 85 % of copper, and also 0 % 31.12.2012
containing inorganic oxides, ethyl cellulose and a solvent ex 3824 90 97 72 Solution containing by weight 80 % or more of 2,4,6-trimethylbenzaldehyde in 0 % 31.12.2013
acetone ex 3824 90 97 73 Particles of silicon dioxide on which are covalently bonded organic compounds, for 0 % 31.12.2013
use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges(1)
ex 3824 90 97 75 Poly(tetramethylene glycol) bis(9-oxo-9H-thioxanthen-1-yloxy)acetate with an 0 % 31.12.2013 average polymer chain length of less than 5 monomer units
ex 3824 90 97 77 Diethylmethoxyborane, in the form of a solution in tetrahydrofuran 0 % 31.12.2013 ex 3824 90 97 78 Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form 0 % 31.12.2012
of powder with a particle size not more than 300 µm, containing by weight: — 60 % or more, but not more than 80 % of sitosterols, — not more than 15 % of campesterols, — not more than 5 % of stigmasterols, — not more than 15 % of betasitostanols
ex 3824 90 97 79 Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 0 % 31.12.2013 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine
ex 3824 90 97 82 α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4- 0 % 31.12.2013 phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]
ex 3824 90 97 84 Reaction product, containing by weight: 0 % 31.12.2013 — 1 % or more but not more than 40 % of molybdenum oxide,
— 10 % or more but not more than 50 % of nickel oxide, — 30 % or more but not more than 70 % of tungsten oxide
ex 3824 90 97 88 Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1’- 0 % 31.12.2014
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
oxybis(2-chloroethane) ex 3824 90 97 89 Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups 0 % 31.12.2013 ex 3824 90 97 90 Hollow spheres of fused aluminosilicate containing 65-80 % amorphous 0 % 31.12.2013
aluminosilicate, with the following characteristics: — a melting point of between 1 600 °C and 1 800 °C,
— a density of 0,6 - 0,8 g/cm 3 ,
for use in the manufacture of particle filters in motor vehicles(1) ex 3824 90 97 92 Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide 0 % 31.12.2014 ex 3824 90 97 95 Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or 0 % 31.12.2014
more of sterols and not more than 4 % of stanols ex 3824 90 97 97 Preparation containing by weight either 10 % or more but not more than 20 % of 0 % 31.12.2013
lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents
ex 3901 10 10 10 Linear low density polyethylene, of a specific gravity of 0,90 or more but not more 0 % 31.12.2016 than 0,95, and containing by weight:
ex 3901 20 90 30
— 96 (± 1) % of ethylene, and — not more than 4 % of hexene
ex 3901 10 90 20 Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt 0 % 31.12.2013 flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a
haze value not more than 6 % and an elongation at break (MD/TD) of 210/340(1) ex 3901 10 90 30 Polyethylene granules, containing by weight 15 % or more but not more than 25 % of 0 % 31.12.2016
copper ex 3901 20 90 10 Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific 0 % 31.12.2013
gravity of 0,945 or more but not more than 0,985, for the manufacture of films for typewriter ribbon or similar ribbon(1)
ex 3901 20 90 20 Polyethylene, containing by weight 35 % or more but not more than 45 % of mica 0 % 31.12.2013 ex 3901 30 00 80 Ethylene-vinyl acetate copolymer, 0 % 31.12.2015
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— containing 27,8 % or more but not more than 29,3 % by weight of vinyl acetate — with a melt flow index of 22 g/10 min or more but no more than 28 g/10 min — containing not more than 15 mg/kg vinyl acetate monomer
ex 3901 30 00 82 Ethylene-vinyl acetate copolymer, 0 % 31.12.2015 — containing 9,8 % or more but not more than 10,8 % by weight of vinyl
acetate — with a melt flow index of 2,5 g/10 min or more but no more than 3,5 g/10 min — containing not more than 15 mg/kg vinyl acetate monomer
ex 3901 90 90 80 Block copolymer of ethylene with octene in the form of pellets: 0 % 31.12.2015 — with a specific gravity of 0,862 or more, but not more than 0,865,
— able to stretch to at least 200 % its original length, — with a hysteresis of 50% (±10 %), — with permanent deformation of not more than 20 %, for use in the manufacture of napkin liners for babies (1)
ex 3901 90 90 82 Copolymer of ethylene and methacrylic acid 0 % 31.12.2015 ex 3901 90 90 91 Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid 4 % 31.12.2013 ex 3901 90 90 92 Chlorosulphonated polyethylene 0 % 31.12.2013 ex 3901 90 90 93 Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in 0 % 31.12.2013
the manufacture of roof sheets(1) ex 3901 90 90 94 Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer 0 % 31.12.2013
and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3901 90 90 97 Chlorinated polyethylene, in the form of powder 0 % 31.12.2013 ex 3902 10 00 10 Polypropylene containing no plasticizer and not more than: 0 % 31.12.2013
— 7 mg/kg of aluminium, — 2 mg/kg of iron, — 1 mg/kg of magnesium, — 8 mg/kg of chloride
ex 3902 10 00 20 Polypropylene, containing no plasticiser, 0 % 31.12.2013 — of a melting point of more than 150 °C (as determined by the ASTM D
3417 method), — of a heat of fusion of 15 J/g or more but not more than 70 J/g, — of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method), — of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)
ex 3902 10 00 30 Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 0 % 31.12.2013 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of
packaging for disposable contact lenses(1) ex 3902 10 00 40 Polypropylene, containing no plasticizer: 0 % 31.12.2014
— of a tensile strength: of 32-60 MPa (as determined by the ASTM D638 method); — of a flexural strength of 50-90 MPa (as determined by the ASTM D790 method); — of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5-15 g/10 min (as determined by the ASTM D1238 method); — with 40 % or more but not more than 80 % by weight of polypropylene, — with 10 % or more but not more than 30 % by weight of glass fibre, — with 10 % or more but not more than 30 % by weight of mica
ex 3902 10 00 50 High isotactic polypropylene (HIPP), whether or not coloured, intended for the 0 % 31.12.2015
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
manufacture of plastic components for air freshener with the following properties:
— a density of 0,880 g/cm 3 or more but not more than 0,913 g/cm 3 (as
determined by test method ASTM D1505),
— a tensile strength at yield of 350 kg/cm 2 or more but not more than 390 kg/cm 2 (as determined by test method ASTM D638)
— a heat deflection temperature of 135 °C or more under load of 0,45 MPa (as determined by test method ASTM 648) (1)
ex 3902 20 00 10 Polyisobutylene, of a number average molecular weight (M n ) of 700 or more but not 0 % 31.12.2013 more than 800
ex 3902 20 00 20 Hydrogenated polyisobutene, in liquid form 0 % 31.12.2013 ex 3902 30 00 91 A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, 0 % 31.12.2013
containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39
ex 3902 30 00 95 A-B-A block copolymer, consisting of: 0 % 31.12.2016 — a copolymer of propylene and ethylene and
— 21 % (± 3 %) by weight of polystyrene
ex 3902 30 00 97 Liquid ethylene-propylene-copolymer with: 0 % 31.12.2016 — a flashpoint of 250° C or more,
— a viscosity index of 150 or more, — of a number average molecular weight (M n ) of 650 or more
ex 3902 90 90 52 Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and 0 % 31.12.2013 petroleum hydrocarbon resin
ex 3902 90 90 55 Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, 0 % 31.12.2013 polyisobutylene and polystyrene containing by weight 10 % or more but not more
than 35 % of polystyrene ex 3902 90 90 60 Non-hydrogenated 100 % aliphatic resin (polymer), with the following 0 % 31.12.2014
characteristics:
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— liquid at room temperature — obtained by cationic polymerisation of C-5 alkenes monomers — with a number average molecular weight (Mn) of 370 (± 50) — with a weight average molecular weight (Mw) of 500 (± 100)
ex 3902 90 90 84 Blend of hydrogenated styrenic block copolymer, polyethylene wax, and tackifier 0 % 31.12.2015 resin, in the form of pellets, containing by weight:
— 70 (±5) % of styrenic block copolymer, — 15 (±5) % of polyethylene wax, and — 15 (±5) % of tackifier resin with the following physical properties: — able to stretch to at least 200 % of its original length — with a hysteresis of 50 (± 10) % — with a permanent deformation of no more than 20 % for use in the manufacture of napkins and napkin liners for babies (1)
ex 3902 90 90 92 Polymers of 4-methylpent-1-ene 0 % 31.12.2013
ex 3902 90 90 93 Synthetic poly-alpha-olefin having a viscosity of at least 38 x 10 -6 m 2 s -1 (38 0 % 31.12.2016
centistokes) at 100°C measured using the ASTM D 445 method ex 3902 90 90 98 Synthetic poly-alpha-olefin with a viscosity at 100° Celsius (measured according to 0 % 31.12.2016
method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene ex 3903 11 00 10 White expandable polystyrene beads with a thermal conductivity of not more than 0 % 31.12.2013
0,034 W/mK at a density of 14,0 kg/m 3 (± 1,5 kg/m 3 ), containing 50 % recycled
material ex 3903 19 00 30 Crystalline polystyrene with a melting point of 268 °C or more but not more than 0 % 31.12.2016
272 °C and a setting point of 232 °C or more but not more than 242 °C, whether or not containing additives and filling material
ex 3903 90 90 10 Butadiene-styrene copolymer pellets or granules, with: 0 % 31.12.2016
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— a specific gravity of 1,05 (±0,02), — a melt flow index at 200° C/5 kg of 13 g/10 min (±1 g/10 min)
ex 3903 90 90 15 Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, 0 % 31.12.2016 n-butyl methacrylate, methacrylic acid and polyolefin wax, for use as a developer in
the manufacture of cartridges for facsimile machines, computer printers or copiers (1)
ex 3903 90 90 20 Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, 0 % 31.12.2016 n-butyl methacrylate and polyolefin wax, for use as a developer in the manufacture of
cartridges for facsimile machines, computer printers or copiers (1)
ex 3903 90 90 25 Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, 0 % 31.12.2016 methacrylic acid and polyolefin wax, for use as a developer in the manufacture of
cartridges for facsimile machines, computer printers or copiers (1)
ex 3903 90 90 30 Butadiene-styrene copolymer pellets with a melting point of 85° C (±5° C), 0 % 31.12.2016 containing by weight:
— 2 % or more but not more than 4 % of tris(tribromophenyl) triazine, — 5 % or more but not more than 10 % of ethane-1,2- bis(pentabromophenyl), — 3 % or more but not more than 5 % of antimony trioxide
ex 3903 90 90 35 Copolymer of α-methylstyrene and styrene, having a softening point of more than 0 % 31.12.2013 113 ºC
ex 3903 90 90 40 Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average 0 % 31.12.2013 molecular weight (M n ) of 500 or more but not more than 6 000
ex 3911 90 99 50
ex 3903 90 90 45 Styrene copolymer granules in primary forms, containing by weight: 0 % 31.12.2016 — 91 % (± 0,5 %) of styrene,
— 8 % (± 0,8 %) of butadiene,
EN 77 EN
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3903 90 90 50 Crystalline copolymer of styrene and p-methylstyrene: 0 % 31.12.2015 — with a melting point of 240 °C or more but not more than 260 °C,
— containing 5 % or more but not more than 15 % by weight of pmethylstyrene
ex 3903 90 90 65 Copolymer of styrene, butyl acrylate, butyl methacrylate, methyl methacrylate and 0 % 31.12.2013 acrylic acid, in the form of powder, containing by weight 81 % (± 1 %) of styrene,
6 % (± 1 %) of butyl acrylate, 5 % (± 1 %) of butyl methacrylate, 7 % (± 1 %) of methyl methacrylate and 1 % (± 0,5 %) of acrylic acid
ex 3903 90 90 75 Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1 % 0 % 31.12.2013 of sodium dodecyl sulphate, in the form of an aqueous emulsion, for the manufacture
of goods of subheading 3305 20 00 or of hair dyes of subheading 3305 90 (1) ex 3903 90 90 80 Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 0 % 31.12.2013
150 µm and a maximum diameter of 800 µm and containing by weight: — minimum 65 % styrene, — maximum 25 % divinylbenzene for use in the manufacture of ion exchange resins(1)
ex 3903 90 90 86 Mixture containing by weight: 0 % 31.12.2013 — 45 % or more but not more than 65 % of polymers of styrene
— 35 % or more but not more than 45 % of poly(phenylene ether) — not more than 10 % of other additives and with one or more of the following special colour effects: — metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment — fluorescent, as characterized by emitting light during absorption of ultraviolet radiation — bright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale
ex 3904 10 00 20 Poly(vinyl chloride) powder, not mixed with any other substances or containing any 0 % 31.12.2014 vinyl acetate monomers, with:
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— a degree of polymerisation of 1 000 (± 300) monomer units, — a coefficient of heat transmission (K-value) of 60 or more, but not more than 70, — a volatile material content of less than 2,00 % by weight, — a sieve non-passing fraction at a mesh width of 120 µm of not more than 1 % by weight, for use in the manufacture of battery separators (1)
ex 3904 30 00 20 Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by 0 % 31.12.2014 weight:
— 80,5 % or more but not more than 81,5 % of vinyl chloride, — 16,5 % or more but not more than 17,5 % of vinyl acetate and — 1,5 % or more but not more than 2,5 % of maleic acid, for use in the heat-sealing of plastics onto steel substrate for industrial uses(1)
ex 3904 40 00 91 Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by 0 % 31.12.2013 weight:
— 87 % or more but not more than 92 % of vinyl chloride, — 2 % or more but not more than 9 % of vinyl acetate and — 1 % or more but not more than 8 % of vinyl alcohol, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink(1)
ex 3904 40 00 93 Copolymer of vinyl chloride and methyl acrylate, containing by weight 80 % (± 1 %) 0 % 31.12.2013 of vinyl chloride and 20 % (± 1 %) of methyl acrylate, in the form of a aqueous
emulsion ex 3904 50 90 92 Vinylidene-chloride methacrylate co-polymer for use in the manufacture of 0 % 31.12.2014
monofilaments (1)
ex 3904 61 00 10 Mixture of polytetrafluoroethylene and mica, in one of the forms mentioned in note 6 0 % 31.12.2013 (b) to Chapter 39
ex 3904 61 00 20 Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, 0 % 31.12.2013 containing 3,2 % or more but not more than 4,6 % by weight of
trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ions
ex 3904 61 00 30 Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m 2 /g or 0 % 31.12.2013 more but not more than 12 m 2 /g, a particle size distribution of 10 % of less than
10 µm and 90 % of less than 35 µm and an average particle size of 20 µm ex 3904 69 80 81 Poly(vinylidene fluoride) 0 % 31.12.2015 ex 3904 69 80 93 Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in 0 % 31.12.2013
note 6 (b) to Chapter 39 ex 3904 69 80 94 Copolymer of ethylene and tetrafluoroethylene 0 % 31.12.2013 ex 3904 69 80 96 Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to 0 % 31.12.2013
Chapter 39 ex 3904 69 80 97 Copolymer of chlorotrifluoroethylene and vinylidene difluoride 0 % 31.12.2013 ex 3905 99 90 92 Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by 0 % 31.12.2013
weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water
ex 3905 99 90 95 Hexadecylated or eicosylated polyvinylpyrrolidone 0 % 31.12.2013 ex 3905 99 90 96 Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, 0 % 31.12.2013
of a weight average molecular weight (M w ) of 25 000 or more but not more than 150 000 and containing by weight: — 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and — 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol
ex 3905 99 90 97 Povidone (INN)-iodine 0 % 31.12.2013 ex 3905 99 90 98 Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by 0 % 31.12.2013
weight 78 % or more but not more than 82 % of triacontyl groups ex 3906 10 00 10 Poly(methyl methacrylate) pellets or granules with a specific gravity of 1,19 (±0,03), 0 % 31.12.2016
and containing by weight 0,02 % or more but not more than 1,2 % of anti-oxidant
3906 90 60 Copolymer of methyl acrylate with ethylene and a monomer containing a non 0 % 31.12.2013 terminal carboxy group as a substituent, containing by weight 50 % or more of
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
methyl acrylate, whether or not mixed with silicon dioxide ex 3906 90 90 10 Polymerization product of acrylic acid with small quantities of a polyunsaturated 0 % 31.12.2013
monomer, for the manufacture of medicaments of heading No 3003 or 3004(1) ex 3906 90 90 15 Photosensitive resin consisting of modified acrylate, acrylic monomer, catalyst 0 % 31.12.2013
(photoinitiator) and stabilizer ex 3906 90 90 20 Polymerization product of acrylic acid with small quantities of a polyunsaturated 6 % 31.12.2013
monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13(1)
ex 3906 90 90 25 Transparent liquid, insoluble in water, containing by weight: 0 % 31.12.2013 — 50 % or more, but not more than 51 % of poly(methyl metacrylate)
copolymer, — 37 % or more, but not more than 39 % of xylene and — 11 % or more, but not more than 13 % of n-butyl acetate
ex 3906 90 90 30 Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a 0 % 31.12.2013 number average molecular weight (M n ) of 500 or more but not more than 6 000
ex 3906 90 90 35 White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a 0 % 31.12.2013 particle size of not more than 18 µm, insoluble in water
ex 3906 90 90 40 Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale 0 % 31.12.2015 with:
— a viscosity of not more than 50 000 Pa.s at 120 °C as determined by the test method ASTM D 3835 — a weight average molecular weight (M w ) of more than 500 000 but not more than 1 200 000 according to the Gel Permeation Chromatography (GPC) test, — a residual monomer content of less than 1 %
ex 3906 90 90 41 Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30 0 % 31.12.2014 ex 3906 90 90 45 Acrylonitrile-butadiene-styrene-methylmethacrylate copolymer pellets with: 0 % 31.12.2016
— a melting point of 96° C (±3° C), — a specific gravity of 1,03 or more but not more than 1,07, and
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
containing by weight: — 25 % or more but not more than 50 % of acrylonitrile-butadiene-styrene, and — 50 % or more but not more than 75 % of methylmethacrylate
ex 3906 90 90 50 Polymers of esters of acrylic acid with one or more of the following monomers in the 0 % 31.12.2013 chain:
— chloromethyl vinyl ether, — chloroethyl vinyl ether, — chloromethylstyrene, — vinyl chloroacetate, — methacrylic acid, — butenedioic acid monobutyl ester, containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39
ex 3906 90 90 65 Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) 0 % 31.12.2013 of 65 °C (± 5 °C), measured with Differential Scanning Calorimetry (DSC)
ex 3906 90 90 80 Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates) 0 % 31.12.2013 ex 3906 90 90 85 Non aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable 0 % 31.12.2013
silyl group at one or both polymer ends ex 3907 20 11 10 Poly(ethylene oxide) of a number average molecular weight (M n ) of 100 000 or more 0 % 31.12.2013 ex 3907 20 11 20 Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified 0 % 31.12.2013
with lysine, of a number average molecular weight (M n ) of 40 000 ex 3907 20 11 30 Bis[Methoxypoly[ethyleneglycol)], chemically modified with lysine, bis(maleimide) 0 % 31.12.2013
terminated, of a number average molecular weight (M n ) of 40 000 ex 3907 20 11 40 Polyethylene glycol with an ethylene oxide chain length of not more than 30, having 0 % 31.12.2015
butyl-2-cyano 3-(4-hydroxyphenyl) acrylate end groups, for use as a UV barrier in liquid masterbatches (1)
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3907 20 20 11 Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of 0 % 31.12.2013 glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a
copolymer of dibutyl maleate and -vinyl-2-pyrrolidone ex 3907 20 20 12 Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average 0 % 31.12.2013
molecular weight (M n ) of 3 500 (± 100) ex 3907 20 99 15 Poly(oxypropylene) having alkoxysilyl end-groups 0 % 31.12.2013 ex 3907 20 99 30 Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) 0 % 31.12.2013 ex 3907 20 99 35 Polyethylene glycol chemically modified with an isocyanate group containing a 0 % 31.12.2013
carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate ex 3907 20 99 45 Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy 0 % 31.12.2013
end-groups ex 3907 20 99 50 Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two 0 % 31.12.2013
components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient
ex 3907 20 99 55 Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number 0 % 31.12.2013 average molecular weight (Mn) of 5 000
ex 3907 20 99 60 Polytetramethylene oxide di-p-aminobenzoate 0 % 31.12.2016 ex 3907 30 00 40 Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the 0 % 31.12.2013
encapsulation of goods of heading No 8533, 8535, 8536, 8541, 8542 or 8548(1) ex 3926 90 97 70
ex 3907 30 00 50 Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not 0 % 31.12.2013 containing any solvent, with:
— a zinc borate hydrate content of not more than 40 % by weight, — a diantimony trioxide content of not more than 5 % by weight
ex 3907 40 00 10 Polycarbonate pellets: 0 % 31.12.2016 — containing not more than 15 % of non halogen flame retardant, and
— with a specific gravity of 1,20 ( ±0,01)
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3907 40 00 20 Polycarbonate pellets with a specific gravity of 1,32 (±0,03), containing 20 % ( 0 % 31.12.2016 ±5 %) of glass fibre
ex 3907 40 00 30 Polycarbonate pellets with a specific gravity of 1,18 or more but not more than 1,25, 0 % 31.12.2016 containing by weight:
— 77 % or more but not more than 90 % of polycarbonate, — 8 % or more but not more than 20 % of phosphoric acid ester, — 0,1 % or more but not more than 1 % of anti-oxidant, and whether or not containing 1 % or more but not more than 5 % of flame retardant
ex 3907 40 00 40 Polycarbonate granules with: 0 % 31.12.2016 — a melt flow rate of 18 g/10 min/300° C/1,2 kg (according to
ASTM D 1238) — a tensile strength of 69 MPa according to ASTM D 638 and — a flexural strength of 112 MPa according to ASTM D 790
ex 3907 40 00 50 Polycarbonate resin, with: 0 % 31.12.2016 — a specific gravity of 1,20 (±0,05),
— a heat deflection temperature of 146° C (±3° C) at 4,6 kgf/cm 2 , and
— a melt flow index of 20 (±10) g/10 min at 300° C/1,2 kg
ex 3907 40 00 60 Polycarbonate acrylonitrile-butadiene-styrene pellets with specific gravity of 1,20 0 % 31.12.2016 (±0,05), containing by weight:
— 65 % or more but not more than 90 % of polycarbonate, — 5 % or more but not more than 15 % of acrylonitrile-butadiene-styrene, — 5 % or more but not more than 20 % of phosphoric acid ester and, — 0,1 % or more but not more than 5 % of anti oxidant
ex 3907 60 80 10 Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4- 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
diol and hexane-1,6-diol ex 3907 60 80 30 Oxygen binding concentrate consisting of a blend of: 0 % 31.12.2013
— a copolymer obtained from polyethylene terephthalate, pyromellitic dianhydride (PMDA) and a hydroxyl substituted polybutadiene — a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, and — organic dyes and/or organic and inorganic pigments where the first co-polymer predominates
ex 3907 60 80 40 Poly(ethylene terephthalate) pellets: 0 % 31.12.2016 — with a specific gravity of 1,23 or more but not more than 1,27 at 23° C,
and — containing not more than 10 % of other modifiers or additives
3907 70 00 Poly(lactic acid) 0 % 31.12.2013 ex 3907 91 90 10 Diallyl phthalate prepolymer, in powder form 0 % 31.12.2014 ex 3907 99 90 10 Poly(oxy-1,4-phenylenecarbonyl), in the form of powder 0 % 31.12.2013 ex 3907 99 90 15 Poly[1-(2’-hydroxyethyl)-2,2,6,6-tetramethyl-4-hydroxy-piperidylsuccinate] 0 % 31.12.2016 ex 3907 99 90 20 Liquid crystal copolyester with a melting point of not less than 270 ºC, whether or 0 % 31.12.2013
not containing fillers ex 3907 99 90 30 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) 0 % 31.12.2015 ex 3907 99 90 60 Copolymer of terephthalic acid and isophthalic acid with bisphenol A 0 % 31.12.2012 ex 3907 99 90 70 Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing 0 % 31.12.2014
more than 10 % by weight of cyclohexane dimethanol ex 3907 99 90 80 Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or 0 % 31.12.2015
derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3908 90 00 10 Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms 0 % 31.12.2013 mentioned in note 6 (b) to Chapter 39
ex 3908 90 00 30 Reaction product of mixtures of octadecanecarboxylic acids polymerised with an 0 % 31.12.2013 aliphatic polyetherdiamine
ex 3908 90 00 50 Oxygen binding concentrate consisting of a blend of: 0 % 31.12.2013 — a copolymer obtained from poly(ethyleneterephthalate), pyromellitic
dianhydride (PMDA) and a hydroxyl substituted polybutadiene — a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, and — organic dyes and/or organic and inorganic pigments where the second co-polymer predominates
ex 3909 40 00 10 Polycondensation product of phenol with formaldehyde, in the form of hollow 0 % 31.12.2013 spheres of a diameter of less than 150 µm
ex 3909 40 00 20 Powder of thermosetting resin in which magnetic particles have been evenly 0 % 31.12.2015 distributed, for use in the manufacture of toner bottles for photocopiers, fax
machines, printers and multifunction devices (1)
ex 3909 50 90 10 UV-curable liquid photopolymer consisting of a mixture containing by weight 60 % 0 % 31.12.2014 or more of polyurethanes and 30 % (± 8 %) of acrylates
ex 3910 00 00 20 Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and 0 % 31.12.2013 poly[methyl(vinyl)siloxane]
ex 3910 00 00 40 Biocompatible silicones for the manufacture of long term surgical implants(1) 0 % 31.12.2016 ex 3910 00 00 50 Silicone based pressure sensitive adhesive in solvent containing 0 % 31.12.2012
copoly(dimethylsiloxane/diphenylsiloxane) gum ex 3910 00 00 60 Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl 0 % 31.12.2014
substituted, with methacrylate end groups ex 3911 10 00 81 Non-hydrogenated Hydrocarbon Resin, obtained by polymerization of C-5 to C-10 0 % 31.12.2013
alkenes, cyclopentadiene and dicyclopentadiene, with a Gardner Colour of more than 10 for the pure product or with a Gardner Colour of more than 8 for the 50 % solution by volume in toluene (as determined by the ASTM method D6166) ex 3911 90 19 10 Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4’-biphenylene) 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3911 90 19 30 Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous 0 % 31.12.2012 solution of sodium hydroxide
ex 3911 90 19 40 m- Xylene formaldehyde resin 0 % 31.12.2016 ex 3911 90 99 25 Copolymer of vinyltoluene and α-methylstyrene 0 % 31.12.2013 ex 3911 90 99 30 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer 0 % 31.12.2015
with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated ex 3911 90 99 31 Copolymers of butadiene and maleic acid, whether or not containing its ammonium 0 % 31.12.2014
salts ex 3911 90 99 35 Alternated copolymer of ethylene and maleic anhydride (EMA) 0 % 31.12.2015 ex 3911 90 99 40 Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, 0 % 31.12.2013
having a calcium content of 9 % or more but not more than 16 % by weight ex 3911 90 99 45 Copolymer of maleic acid and methyl vinyl ether 0 % 31.12.2013 ex 3911 90 99 65 Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether 0 % 31.12.2013 ex 3911 90 99 70 Aqueous solution containing by weight: 0 % 31.12.2016
— 30 % or more but not more than 40 % of poly-4-vinylpyridine-N-oxide, — 0,1 % or more but not more than 4 % of isonicotinic acid-N-oxide, — 0,1 % or more but not more than 3,5 % of sodium sulphate, — 0,1 % or more but not more than 2 % of 4-acetylpyridine-N-oxide
ex 3911 90 99 75 Poly(ethyleneimine) 0 % 31.12.2016 ex 3911 90 99 86 Copolymer of methyl vinyl ether and maleic acid anhydride 0 % 31.12.2016 ex 3912 11 00 30 Cellulose triacetate 0 % 31.12.2016 ex 3912 11 00 40 Cellulose diacetate powder 0 % 31.12.2015
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3912 39 85 10 Ethylcellulose, not plasticized 0 % 31.12.2013 ex 3912 39 85 20 Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and 0 % 31.12.2013
sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose ex 3912 39 85 30 Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more 0 % 31.12.2013
carbon atoms ex 3912 39 85 40 Hypromellose (INN) 0 % 31.12.2016 ex 3912 90 10 10 Cellulose acetate propionate, non-plasticised, in the form of powder: 0 % 31.12.2013
— containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method) and — of a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method), for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings(1)
ex 3912 90 10 20 Hydroxypropyl methylcellulose phthalate 0 % 31.12.2013 ex 3913 90 00 81 Blend of cyanoethyl pullulan and cyanoethyl poly(vinyl alcohol) 0 % 31.12.2013 ex 3913 90 00 85 Sterile sodium hyaluronate 0 % 31.12.2013 ex 3913 90 00 92 Protein, chemically modified by carboxylation and/or phthalic acid addition, having a 0 % 31.12.2013
weight average molecular weight (M w ) of 100 000 to 300 000 ex 3913 90 00 94 Granules containing by weight: 0 % 31.12.2016
— 35 % or more but less than 75 % of a high amylose extruded biopolymer produced from corn starch, — 5 % or more but less than 16 % polyvinyl alcohol, — 10 % or more but less than 46 % of polyol plasticisers, — 0,25 % or more but less than 3 % of stearic acid, — whether or not containing 30 % (± 10 %) of biodegradable polyester resin but never to a level that exceeds the amount of the high amylose biopolymer
ex 3913 90 00 95 Chondroitinsulphuric acid, sodium salt 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3913 90 00 96 Powder consisting of 90 % (± 5 %) by weight of a high amylose extruded biopolymer 0 % 31.12.2016 produced from corn starch, 10 % (± 5 %) by weight of a synthetic polymer and 0,5 %
(± 0,25 %) of stearic acid ex 3916 20 00 91 Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and 0 % 31.12.2014
facings, containing the following additives: — titanium dioxide — poly(methyl methacrylate) — calcium carbonate — binding agents
ex 3917 32 00 91 Pipe consisting of a block copolymer of polytetrafluoroethylene and 0 % 31.12.2013 polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a
diameter of not more than 85 mm and a wall-thickness of 30 µm or more but not more than 110 µm
ex 3917 40 00 91 Plastic connectors containing O-rings, a retainer clip and a release system for 0 % 31.12.2014 insertion into car fuel hoses
ex 3919 10 19 10 Reflecting film, consisting of a layer of polyurethane, with, on one side, security 0 % 31.12.2013 imprints against counterfeiting, alteration or substitution of data or duplication, or an
ex 3919 10 80 25 official mark for an intended use, and embedded glass beads and, on the other side,
an adhesive layer, covered on one side or on both sides with a release film ex 3919 90 00 31 ex 3919 10 19 20 Rolls of two-sided adhesive tape: 0 % 31.12.2013
— coated with non-vulcanised natural or synthetic rubber — with a width of 20 mm or more but not more than 40 mm — containing silicone, aluminium hydroxide, acryl and urethane
ex 3919 10 80 21 Reflecting sheet, consisting of: 0 % 31.12.2013 ex 3919 90 00 21 — a polycarbonate or acrylic polymer film totally embossed on one side in a
regular shaped pattern, ex 3920 61 00 20
— covered on both sides with one or more layers of plastic material, — whether or not covered on one side with a self-adhesive layer and a release sheet
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3919 10 80 23 Reflecting film, consisting of several layers including: 0 % 31.12.2014 — poly(vinyl chloride);
— polyurethane with, on one side, imprints against counterfeiting, alteration or substitution of data or duplication, and on the other side, a layer of glass microspheres; — a layer incorporating a security and/or official mark which changes appearance with angle of view; — metallized aluminium; — and adhesive, covered on one side with a release liner
ex 3919 10 80 27 Polyester film: 0 % 31.12.2014 ex 3919 90 00 20 — coated on one side with an acrylic thermal release adhesive that debonds
at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and
— on the other side not coated or coated with an acrylic pressure sensitive
adhesive or with an acrylic thermal release adhesive that debonds at temperatures
of 90 °C or more but not more than 200 °C, and a polyester liner
ex 3919 10 80 30 Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 10 to 20 cm 0 % 31.12.2016
wide, 10 to 210 m long and with a total thickness of 10 to 50 µm, not for retail sale
ex 3919 10 80 32 Polytetrafluoroethylene film: 0 % 31.12.2014
— with a thickness of 110 µm or more,
— with a surface resistance of between 10 2 -10 14 ohms as determined by test
method ASTM D 257, — coated on one side with an acrylic pressure sensitive adhesive
ex 3919 10 80 35 Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd 0 % 31.12.2013 polyester, with, on one side, security imprints against counterfeiting, alteration or
substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film ex 3919 10 80 37 Polytetrafluoroethylene film: 0 % 31.12.2014
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— with a thickness of 100 µm or more, — an elongation at break of not more than 100 %, — coated on one side with a pressure sensitive silicon adhesive
ex 3919 10 80 40 Black poly(vinyl chloride) film: 0 % 31.12.2016 ex 3919 90 00 43 — with a gloss of more than 30 degrees according to ASTM D2457,
— whether or not covered on one side with a protective
poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive
adhesive with channels and a release liner
ex 3919 10 80 45 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro 0 % 31.12.2012
channelled pressure sensitive adhesive and on one side a liner, with an application
ex 3919 90 00 45 thickness of 0,38 mm or more but not more than 1,53 mm
ex 3919 10 80 50 Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate 0 % 31.12.2013 (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a
ex 3919 90 00 41 thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs
ex 3920 10 89 25 (1)
ex 3919 10 80 55 Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic 0 % 31.12.2012 pressure sensitive adhesive and on the other side with an acrylic pressure sensitive
ex 3919 90 00 53 adhesive and a release sheet, of a peel adhesion at an angle of 90 º of more than 25 N/cm (as determined by the ASTM D 3330 method)
ex 3919 10 80 60 Reflecting laminated sheet showing a regular pattern, consisting of a film of 0 % 31.12.2013 poly(methylmethacrylate), followed by a layer of acrylic polymer containing
microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet
ex 3919 10 80 65 Self-adhesive reflecting sheet whether or not in segmented pieces: 0 % 31.12.2013 ex 3919 90 00 57 — showing a regular pattern,
— with or without an application tape layer, — consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) containing microprisms, — whether or not containing an additional layer of polyester and — an adhesive with a final release sheet
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3919 10 80 70 Rolls of polyethylene foil: 0 % 31.12.2016 ex 3919 90 00 75 — self-adhesive on one side,
— of a total thickness of 0,025 mm or more, but not more than 0,09 mm, — of a total width of 60 mm or more, but not more than 910 mm, of a kind used for the protection of the surface of products of headings 8521 and 8528
ex 3919 10 80 75 Self adhesive reflecting film, consisting of several layers including: 0 % 31.12.2016 ex 3919 90 00 80 — a copolymer of acrylic resin,
— polyurethane, — a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, — glass microspheres, and — an adhesive layer, with a release liner on one or both sides
ex 3919 90 00 19 Transparent poly(ethylene terephthalate) self-adhesive film: 0 % 31.12.2013 — free from impurities or faults,
— coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound, — whether or not with a printable dust-proof layer of modified long chain alkyl organic compound, — with a total thickness without the liner of 54 µm or more but not more than 64 µm, and — a width of more than 1 295 mm but not more than 1 305 mm
ex 3919 90 00 22 Black polypropylene film: 0 % 31.12.2014 — with a gloss of more than 20 degrees as determined by test method ASTM
D2457, — whether or not covered on one side with a protective poly(ethylene terephthalate) film and on the other side with a pressure sensitive adhesive with channels and a release liner
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3919 90 00 23 Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a 0 % 31.12.2013 copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side
with an acrylic abrasion resistant coating and on the other side with an acrylic
pressure sensitive adhesive, a water soluble methylcellulose coating and a
poly(ethylene terephthalate) protective liner
ex 3919 90 00 24 Reflecting laminated sheet: 0 % 31.12.2014
— consisting of an epoxy acrylate layer embossed on one side in a regular
shaped pattern,
— covered on both sides with one or more layers of plastic material and
— covered on one side with an adhesive layer and a release sheet
ex 3919 90 00 25 Film consisting of a multi-layer construction of poly(ethylene terephthalate) and 0 % 31.12.2012 copolymer of butylacrylate and methylmethacrylate, coated on one side with an
acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide
and carbon black, and on the other side with an acrylic pressure sensitive adhesive
and a silicone-coated poly(ethylene terephthalate) protective liner
ex 3919 90 00 26 Ethylene vinyl acetate film: 0 % 31.12.2014
— of a thickness of 100 µm or more,
— coated on one side with an acrylic pressure sensitive or UV-sensitive
adhesive and a polyester liner
ex 3919 90 00 27 Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0 % 31.12.2013 0,147 N/25 mm and an electrostatic discharge of not more than 500 V
ex 3919 90 00 28 Poly(vinyl chloride) or polyethylene or any other polyolefine film: 0 % 31.12.2014 — of a thickness of 65 µm or more,
— coated on one side with an acrylic UV-sensitive adhesive and a polyester liner
ex 3919 90 00 29 Polyester film coated on both sides with an acrylic and/or rubber (pressure sensitive) 0 % 31.12.2014 adhesive put up in rolls of a width of 45,7 cm or more but not more than 132 cm
(supplied with a release liner) ex 3919 90 00 33 Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated 0 % 31.12.2013
on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 µm or more, but not more than 70 µm, and with a width of more than 1 245 mm but not more than 1 255 mm
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3919 90 00 35 Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an 0 % 31.12.2013 embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side
with: — a layer of polyurethane containing glass micro beads, — a layer of poly(ethylene vinyl acetate), — an adhesive layer, and — a release sheet
ex 3919 90 00 37 UV-absorbing film of poly (vinyl chloride): 0 % 31.12.2014 — with a thickness of 78 µm or more,
— covered on one side with an adhesive layer and with a release sheet, — with an adhesive strength of 1 764 mN/25 mm or more
ex 3919 90 00 39 Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an 0 % 31.12.2013 adhesive in which are embedded glass balls of a diameter of not more than 100 µm
ex 3919 90 00 47 Polarizer film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported 0 % 31.12.2012 on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and
ex 9001 20 00 40 release film on one side
ex 3919 90 00 49 Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) 0 % 31.12.2013 embossed on one side in a regular shaped pattern, a film of a polymer containing
glass microspheres, an adhesive layer and a release sheet ex 3919 90 00 51 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 µm or 0 % 31.12.2013
more but not more than 90 µm, whether or not covered on one side with an adhesive
ex 3920 51 00 30 layer and a release sheet
ex 3919 90 00 55 Rolls of biaxially oriented polypropylene film with: 0 % 31.12.2012 — a self adhesive coating,
— a width of 363 mm or more, but not more than 507 mm, — a total film thickness of 10 µm or more but not more than 100 µm, for use in the protection of LCD displays during the manufacturing of LCD
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
modules(1) ex 3919 90 00 60 Reflecting film containing: 0 % 31.12.2015
— a poly(vinyl chloride) layer, — a polyurethane layer, — a glass microspheres layer, — a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view, — a metallised aluminium layer, and — an adhesive, covered on one side with a release liner
ex 3919 90 00 63 Co-extruded trilayer film, 0 % 31.12.2015 — each layer containing a mixture of polypropylene and polyethylene,
— containing not more than 3 % by weight of other polymers, — whether or not containing titanium dioxide in the core layer, — coated with an acrylic pressure sensitive adhesive and — with a release liner — of an overall thickness of not more than 110 µm
ex 3919 90 00 65 Self-adhesive film with a thickness of 40 µm or more, but not more than 400 µm, 0 % 31.12.2015 consisting of one or more layers of transparent, metallized or dyed poly(ethylene
terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner
ex 3919 90 00 70 Self-adhesive polishing discs of microporous polyurethane, whether or not coated 0 % 31.12.2015 with a pad
ex 3920 10 25 10 Film of a thickness of not more than 0,20 mm, of a blend of polyethylene and a 0 % 31.12.2013 copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for
ex 3920 10 89 20 coating both sides of a layer of unvulcanized rubber(1)
ex 3920 10 25 20 Film of polyethylene, of a kind used for typewriter ribbon 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3920 10 28 91 Poly(ethylene) film of a thickness of 19 µm (± 1), printed with a graphic design 0 % 31.12.2013 which consists of eight different colours on one side of the film, and one colour on
the opposite side, the graphic design also has the following characteristics: — is repetitive and equally spaced along the length of the film — is equally and visibly aligned when viewed from the back or front of the film
ex 3920 10 89 30 Ethylene vinyl acetate (EVA) film with: 0 % 31.12.2016 — a raised relief surface with embossed undulations, and
— a thickness of more than 0,125 mm ex 3920 10 89 40 Composite sheet containing an acrylic coating and laminated to a high-density 0 % 31.12.2016
polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm ex 3920 20 21 30 Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one 0 % 31.12.2013
side and a total thickness of 11,5 µm or more but not more than 13,5 µm ex 3920 20 29 92 Mono-axial oriented film, of a total thickness of not more than 75 µm, consisting of 0 % 31.12.2013
two or three layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: — a tensile strength in the machine direction of 140 MPa or more but not more than 270 MPa and — a tensile strength in the transverse direction of 20 MPa or more but not more than 40 MPa as determined by test method ASTM D882/ISO 527-3
ex 3920 20 29 93 Mono-axial oriented film, consisting of three layers, each layer consisting of a 0 % 31.12.2014 mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having:
— a thickness of 55 µm or more but not more than 97 µm, — a tensile modulus in the machine direction of 0,75 GPa or more but not more than 1,45 GPa, and — a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,55 GPa
ex 3920 20 29 94 Co-extruded trilayer film, 0 % 31.12.2016 — each layer containing a mixture of polypropylene and polyethylene,
— containing not more than 3 % by weight of other polymers, — whether or not containing titanium dioxide in the core layer,
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— of an overall thickness of not more than 70 µm ex 3920 20 80 92 Laminated sheet or strip, consisting of a film of a thickness of 181 µm or more but 0 % 31.12.2013
not more than 223 µm composed of a blend of a copolymer of propylene with
ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or
covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene
(SEBS) and a layer of polyester
ex 3920 43 10 92 Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any 0 % 31.12.2013
holes, even microscopic, of a thickness of 60 µm or more but not more than 80 µm,
containing 30 or more but not more than 40 parts of plasticizer to 100 parts of
poly(vinyl chloride)
ex 3920 43 10 94 Film of a specular gloss of 70 or more, measured at an angle of 60 ° using a 0 % 31.12.2013
glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two
ex 3920 49 10 93 layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a
thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss
surface with a protective film of polyethylene, in rolls of a width of 1 000 mm or
more but not more than 1 450 mm, for use in the manufacture of goods of heading
No 9403(1)
ex 3920 43 10 95 Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of 0 % 31.12.2013
an other plastic totally embossed in a regular pyramidal pattern, covered on one side
with a release sheet
ex 3920 43 10 96 Film, of a specular gloss of 70 or more measured at an angle of 60 ° using a 0 % 31.12.2013
glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of
poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), for coating
panels and doors of a kind used in the manufacture of domestic appliances(1)
ex 3920 43 10 97 Film embossed to a depth of not more than 12 µm, of a specular gloss of 7 or more 0 % 31.12.2013
but not more than 17, measured at an angle of 60 ° using a glossmeter (as determined
by the ISO 2813:2000 method), consisting of at least two layers of poly(vinyl
chloride), of a total thickness of not more than 0,5 mm, covered on the embossed side
with a protective film, in rolls of a width of 1 400 mm or more but not more than
1 420 mm, for use in the manufacture of goods of heading No 9403(1)
ex 3920 51 00 10 Poly(methyl methacrylate) plate, with an antistatic coating, of dimensions of 0 % 31.12.2013
738 × 972 mm (± 1,5 mm)
ex 3920 51 00 20 Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness 0 % 31.12.2013
of 3,5 mm or more but not more than 19 mm
ex 3920 51 00 40 Sheets of polymethylmethacrylate plastic complying with standards EN 4364 (MIL- 0 % 31.12.2013
P-5425E), EN 4365 (MIL-P-8184) and EN 4366 (MIL-PRF-25690)
ex 3920 59 90 10 Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl 0 % 31.12.2016
acrylate with a thickness of 1,0 mm or more but not more than 1,3 mm, put up in rolls
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3920 59 90 20 Reflecting laminated sheet, consisting of an epoxy acrylate layer embossed on one 0 % 31.12.2014 side in a regular shaped pattern, covered on both sides with one or more layers of
plastic material ex 3920 59 90 30 Non- self adhesive reflecting film, consisting of several layers including: 0 % 31.12.2016
— a copolymer of acrylic resin — polyurethane — a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use — glass microspheres, and — a permanent liner of poly(ethyleneterephthalate)
ex 3920 62 19 01 Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 µm or 0 % 31.12.2013 more but not more than 350 µm, consisting especially of a layer containing carbon
ex 3920 62 19 03 black
ex 3920 62 19 07 Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not 0 % 31.12.2013 more than 25 µm, either:
ex 3920 62 19 09
— only dyed in the mass, or — dyed in the mass and metallized on one side
ex 3920 62 19 11 Film of poly(ethylene terephthalate) only, of a total thickness of not more than 0 % 31.12.2013 120 µm, consisting of one or two layers each containing a colouring and/or UV-
ex 3920 62 19 13 absorbing material throughout the mass, uncoated with an adhesive or any other
material ex 3920 62 19 17 Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more 0 % 31.12.2013
than 120 µm, consisting of one layer which is metallised only and one or two layers
ex 3920 62 19 19 each containing a colouring and/or UV-absorbing material throughout the mass,
uncoated with an adhesive or any other material
ex 3920 62 19 20 Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of 0 % 31.12.2013 safety stickers and badges, safety clothing and accessories thereof, or of school
satchels, bags or similar containers(1) ex 3920 62 19 21 Film of poly(ethylene terephthalate), coated or covered on one side or on both sides 0 % 31.12.2013
with a layer of modified polyester, of a total thickness of 7 µm or more but not more
ex 3920 62 19 23 than 11 µm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm(1)
ex 3920 62 19 24 Film of poly(ethylene terephthalate) of a thickness of 186 µm or more but not more 0 % 31.12.2014
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3920 62 19 26 than 191 µm coated on one side with an acrylic layer in a matrix pattern
ex 3920 62 19 37 Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on 0 % 31.12.2013 one side with a layer of aluminium oxide of a thickness of not more than 35 nm
ex 3920 62 19 39 ex 3920 62 19 41 Poly(ethylene terephthalate) film, of a thickness of 18 µm or more but not more than 0 % 31.12.2013
25 µm, having: ex 3920 62 19 43
— a shrinkage of (3,4 ± 0,1) % in the machine direction (as determined by the ASTM D 1204 method) and — a shrinkage of (0,3 ± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method)
ex 3920 62 19 47 Sheets or rolls of poly(ethylene terephthalate): 0 % 31.12.2015 ex 3920 62 19 49 — coated on both sides with a layer of epoxy acrylic resin,
— of a total thickness of 37 µm (± 3 µm) ex 3920 62 19 51 Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, 0 % 31.12.2013
coated on one side with metal and/or metal oxides, containing by weight less than
ex 3920 62 19 53 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface
resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257-99 method)
ex 3920 62 19 54 Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an 0 % 31.12.2013 angle of 45 ° and 18 measured at an angle of 60 ° using a glossmeter (as determined
ex 3920 62 19 56 by the ISO 2813:2000 method) and a width of 1 600 mm or more
ex 3920 62 19 57 Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 0 % 31.12.2013 185 µm or more but not more than 253 µm, coated on both sides with an antistatic
ex 3920 62 19 59 layer
ex 3920 62 19 73 Iridescent film of polyester and poly(methyl methacrylate) 0 % 31.12.2013 ex 3920 69 00 40 ex 3920 62 19 75 Transparent polyethylene terephthalate film: 0 % 31.12.2013 ex 3920 62 19 77 — coated on both sides with layers of organic substances on the basis of
acryl of a thickness of 7 nm or more but not more than 80 nm, — with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, — with a light transmission of more than 93 %, — with a haze value of not more than 1,3 %,
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— with a total thickness of 10 µm or more but not more than 350 µm, — with a width of 800 mm or more but not more than 1 600 mm
ex 3920 62 19 80 Poly(ethylene terephtalate) film of a thickness of not more than 20 µm, coated on 0 % 31.12.2012 both sides with a gas barrier layer consisting of a polymeric matrix in which silica
ex 3920 62 19 82 has been dispersed and of a thickness of not more than 2 µm
ex 3920 69 00 20 Film of poly(ethylene naphthalene-2,6-dicarboxylate) 0 % 31.12.2013 ex 3920 79 90 10 Cellulose acetyl butyrate film, whether or not combined with a polycarbonate layer, 0 % 31.12.2012
of a thickness of not more than 0,81 mm containing a micro-louvre with a typical viewing angle of 30 degrees measured on each side of the surface normal
ex 3920 91 00 51 Poly(vinyl butyral) film containing by weight 25 % or more but not more than 28 % 0 % 31.12.2014 of tri-isobutyl phosphate as a plasticizer
ex 3920 91 00 52 Poly(vinyl butyral) film: 0 % 31.12.2014 — containing by weight 26 % or more but not more than 30 % of
triethyleneglycol bis(2-ethyl hexanoate) as a plasticizer, — with a thickness of 0,73 mm or more but not more than 1,50 mm
ex 3920 91 00 91 Poly(vinyl butyral) film having a graduated coloured band 3 % 31.12.2013 ex 3920 91 00 92 Plasticised film of polyvinyl butyral, containing by weight: 0 % 31.12.2013
— either 14,5 % or more but not more than 17,5 % of dihexyl adipate, — or 14,5 % or more but not more than 28,5 % of dibutyl sebacate
ex 3920 91 00 93 Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, 0 % 31.12.2013 or laminated film of poly(ethylene terephthalate) films, metallised on the external
sides only, and having the following characteristics: — a visible light transmission of 50 % or more, — coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), — a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account, for use in the manufacture of heat-reflecting or decorative laminated glass(1)
ex 3920 91 00 95 Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing 0 % 31.12.2013 by weight 29 % or more but not more than 31 % of 2,2’-ethylenedioxydiethyl bis(2-
ethylhexanoate) as a plasticiser
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3920 92 00 30 Polyamide film of a thickness of not more than 20 µm, coated on both sides with a 0 % 31.12.2012 gas barrier layer which consists of a polymeric matrix in which silica has been
dispersed and of a thickness of not more than 2 µm ex 3920 99 28 40 Polymer film containing the following monomers: 0 % 31.12.2013
— poly (tetramethylene ether glycol), — bis (4-isocyanotocyclohexyl) methane, — 1,4-butanediol or 1,3-butanediol, — with a thickness of 0,25 mm or more but not more than 5,0 mm, — embossed with a regular pattern on one surface, — and covered with a release sheet
ex 3920 99 28 50 Thermoplastic polyurethane film, of a thickness of 250 µm or more but not more than 0 % 31.12.2016 350 µm, covered on one side with a removable protective film
ex 3920 99 28 60 Silicone tape, plate or strip: 0 % 31.12.2016 — of a total thickness of 2,5 mm or more, but not more than 8,8 mm,
— of a total width of 12 mm or more, but not more than 65 mm, for use in the manufacture of products of headings 8521 and 8528 (1)
ex 3920 99 28 70 Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: 0 % 31.12.2016 — microspheres with a coating of metal, whether or not alloyed with gold,
— an adhesive layer, — with a protective layer of silicone or poly(ethylene terephthalate) on one side, — with a protective layer of poly(ethylene terephthalate) on the other side, and — with a width of 5 cm or more but not more than 100 cm — with a length of not more than 2000 m
ex 3920 99 59 25 Poly(1-chlorotrifluoroethylene) film 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3920 99 59 50 Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0 % 31.12.2013 0,019 mm or more but not more than 0,14 mm, impermeable to water vapour
ex 3920 99 59 55 Ion-exchange membranes of fluorinated plastic material 0 % 31.12.2013 ex 3920 99 59 60 Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 µm or 0 % 31.12.2013
more but not more than 90 µm, a tensile strength at break of 20 MPa or more but not
more than 45 MPa and an elongation at break of 250 % or more but not more than
900 %
ex 3920 99 90 20 Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not more than 0 % 31.12.2013
3,15 mm and a maximum length of 300 m, used for joining electronic components in
the production of LCD or plasma displays
ex 3921 13 10 10 Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific 0 % 31.12.2013
gravity of 0,09435 or more but not more than 0,10092
ex 3921 19 00 91 Microporous polypropylene film of a thickness of not more than 100 µm 0 % 31.12.2013
ex 3921 19 00 93 Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in 0 % 31.12.2013
the manufacture of filters for kidney dialysis equipment(1)
ex 3921 19 00 95 Film of polyethersulfone, of a thickness of not more than 200 µm 0 % 31.12.2013
ex 3921 19 00 96 Cellular film, consisting of a layer of polyethylene of a thickness of 90 µm or more 0 % 31.12.2013
but not more than 140 µm and a layer of regenerated cellulose of a thickness of
10 µm or more but not more than 40 µm
ex 3921 90 10 10 Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), 0 % 31.12.2013
reinforced with glass fibres
ex 3921 90 10 20 Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer 0 % 31.12.2013
of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with
polyurethane or epoxide resin
ex 3921 90 55 20 Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide 0 % 31.12.2013
(B) triazine (T) resin mixed with epoxide resin, measuring:
— 469,9 mm (± 2 mm) x 622,3 mm (± 2 mm), or
— 469,9 mm (± 2 mm) x 414,2 mm (± 2 mm), or
— 546,1 mm (± 2 mm) x 622,3 mm (± 2 mm)
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3921 90 55 25 Prepreg sheets or rolls containing polyimide resin 0 % 31.12.2014 ex 7019 40 00 21 ex 7019 40 00 29 ex 3921 90 55 30 Prepreg sheets or rolls containing brominated epoxy resin reinforced with glass 0 % 31.12.2014
fabric, having — a flow of not more than 3,6 mm (as determined by IPC-TM 650.2.3.17.2), and — a glass transition temperature (Tg) of more than 170 °C (as determined by IPC-TM 650.2.4.25) for use in the manufacture of printed circuit boards (1)
ex 3921 90 60 91 Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of 0 % 31.12.2013 tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains
ex 5407 71 00 20 ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium
or sodium salt form ex 5903 90 99 10 ex 3921 90 60 93 Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 0 % 31.12.2013
60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of
a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride),
joined by a metallised adhesive coating, for coating panels and doors of a kind used
in the manufacture of domestic appliances(1)
ex 3923 30 90 10 Polyethylene container, for compressed hydrogen: 0 % 31.12.2013
— with aluminium bosses at both ends,
— wholly embedded in an overwrap of carbon fibres impregnated with
epoxide resin,
— of a diameter of 213 mm or more, but not more than 368 mm,
— a length of 860 mm or more, but not more than 1 260 mm and
— a capacity of 18 litres or more, but not more than 50 litres
ex 3926 90 92 20 Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) 0 % 31.12.2013
embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a gridpattern
to a backing-strip of plastic material, or of knitted or woven fabric covered on
one side with plastic material
ex 3926 90 97 10 Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 µm or more but 0 % 31.12.2013
not more than 80 µm
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 3926 90 97 15 Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor 0 % 31.12.2013 vehicle suspension systems(1)
ex 3926 90 97 25 Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and 0 % 31.12.2013 isobornyl methacrylate, of a diameter of 3 µm or more but not more than 4,6 µm
ex 3926 90 97 55 Flat product of polyethylene, perforated in opposing directions, of a thickness of 0 % 31.12.2013
600 µm or more but not more than 1 200 µm and of a weight of 21 g/m 2 or more but not more than 42 g/m 2
ex 4007 00 00 10 Siliconated vulcanised rubber thread and cord 0 % 31.12.2013 ex 4016 99 97 20 Soft rubber sealing stoppers for the manufacture of electrolytic capacitors(1) 0 % 31.12.2013 ex 4016 99 97 30 Tyre moulding bladder 0 % 31.12.2016 4105 10 00 Sheep or lamb skin leather, without wool on, tanned or retanned but not further 0 % 31.12.2013
prepared, whether or not split, other than leather of heading 4114
4105 30 90
4106 21 00 Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, 0 % 31.12.2013 whether or not split, other than leather of heading 4114
4106 22 90
4106 31 00 Leather of other animals, without hair on, not further prepared than tanned, other than 0 % 31.12.2013 leather of heading 4114
4106 32 00
4106 40 90
4106 92 00 ex 5004 00 10 10 Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, 0 % 31.12.2016
scoured or bleached, entirely of silk ex 5005 00 10 10 Yarn spun entirely from silk waste (noil), not put up for retail sale 0 % 31.12.2013 ex 5005 00 90 10 ex 5205 31 00 10 Six ply yarn of bleached cotton, measuring 925 dtex or more but not more than 989 0 % 31.12.2013
dtex per single yarn, for the manufacture of tampons(1)
5208 11 10 Fabrics for the manufacture of bandages, dressings and medical gauzes 5.2 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 5402 45 00 20 Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the 0 % 31.12.2013 polycondensation of m-phenylenediamine and isophthalic acid
ex 5402 47 00 10 Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1 650 0 % 31.12.2016 decitex or more but not more than 1 800 decitex, consisting of 110 filaments or more
but not more than 120 filaments, each having a core of poly(ethylene terephthalate)
and a skin of polyamide-6, containing by weight 75 % or more but not more than
77 % of poly(ethylene terephthalate), for use in the manufacture of roofings(1)
ex 5402 47 00 20 Bicomponent monofilament yarn of not more than 30 dtex, consisting of: 0 % 31.12.2015
— a polyethylene terephthalate core, and
— an outer layer of a copolymer of polyethylene terephthalate and
polyethylene isophthalate,
for use in the manufacture of filtration fabrics
(1)
ex 5402 49 00 30 Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical 0 % 31.12.2013
sutures(1)
ex 5402 49 00 50 Non-textured filament yarn of poly(vinyl alcohol) 0 % 31.12.2013
ex 5402 49 00 70 Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, 0 % 31.12.2013
in the form of a wick containing 1 000 continuous filaments or more but not more
than 25 000 continuous filaments, of a weight per metre of 0,12 g or more but not
more than 3,75 g and of a length of 100 m or more, for the manufacture of carbonfibre
yarn(1)
ex 5404 19 00 20 Monofilament of poly(1,4-dioxanone) 0 % 31.12.2013
ex 5404 19 00 30 Unsterilised monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5- 0 % 31.12.2014
dione, for the manufacture of surgical sutures(1)
ex 5404 19 00 50 Monofilaments of polyester or poly(butylene terephthalate), with crosssectional 0 % 31.12.2013
dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of
zippers(1)
ex 5404 90 90 20 Strip of polyimide 0 % 31.12.2013
ex 5407 10 00 10 Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament 0 % 31.12.2012
yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-
phenylenediamine and 3,4’–oxybis (phenyleneamine)
ex 5503 11 00 10 Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 5601 30 00 40 3,4’-oxybis(phenyleneamine), of a length of not more than 7 mm
ex 5503 40 00 10 Hollow polypropylene staple fibres: 0 % 31.12.2016 — measuring 6 decitex or more but not more than 10 decitex,
— of a strength of 3,5 cN/dtex or more — of a diameter of 30 µm or more for use in the manufacture of napkins and napkin liners for babies and other sanitary products(1)
ex 5503 90 00 20 Poly(vinyl alcohol) fibres, whether or not acetalized 0 % 31.12.2013 ex 5506 90 00 10 ex 5601 30 00 10 ex 5603 11 10 10 Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: 0 % 31.12.2013 ex 5603 11 90 10 — of a thickness of 200 µm or more but not more than 280 µm and
ex 5603 12 10 10 — of a weight of 20 g/m 2 or more but not more than 50 g/m 2
ex 5603 12 90 10 ex 5603 91 10 10 ex 5603 91 90 10 ex 5603 92 10 10 ex 5603 92 90 10
ex 5603 11 10 20 Nonwovens, not weighing more than 20 g/m 2 , containing spunbonded and meltblown 0 % 31.12.2012
filaments put together in a sandwich way with the two outer layers containing fine
ex 5603 11 90 20 endless filaments (not less than 10 µm but not more than 20 µm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 µm but not more
than 5 µm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins(1)
ex 5603 12 90 30 Non-wovens of aromatic polyamide fibres obtained by polycondensation of m- 0 % 31.12.2013 phenylenediamine and isophthalic acid, in the piece or cut into rectangles
ex 5603 13 90 30 ex 5603 14 90 10 ex 5603 92 90 60 ex 5603 93 90 40
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 5603 94 90 30 ex 5603 12 90 50 Non-woven: 0 % 31.12.2012
— weighing 30g/m 2 or more, but not more than 60g/m 2 ,
— containing fibres of polypropylene or of polypropylene and polyethylene, — whether or not printed, with: — on one side, 65 % of the total surface area having circular bobbles of 4mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded, — and on other side a smooth untextured surface, for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles(1)
ex 5603 12 90 60 Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m 2 but not 0 % 31.12.2013 more than 80 g/m 2 and an air resistance (Gurley) of 8 s or more but not more than
ex 5603 13 90 60 36 s (as determined by the ISO 5636/5 method)
ex 5603 12 90 70 Non-wovens of polypropylene: 0 % 31.12.2013 ex 5603 13 90 70 — with a melt blown layer, laminated on each side with spun-bonded
filaments of polypropylene, ex 5603 92 90 40
— with a thickness of not more than 550 µm, ex 5603 93 90 10
— with a weight of not more than 150 g/m², — in the piece, or simply cut into squares or rectangles, and — not impregnated
ex 5603 13 10 10 Electrically nonconductive nonwovens, consisting of a central film of poly(ethylene 0 % 31.12.2013 terephthalate) laminated on each side with unidirectionally aligned fibres of
ex 5603 14 10 10 poly(ethylene terephthalate), coated on both sides with high grade temperature
resistant electrical nonconductive resin, weighing 147 g/m 2 or more but not more
than 265 g/m 2 , with non-isotropic tensile strength on both directions, to be used as
electrical insulation material ex 5603 13 10 20 Non-woven of spunbonded polyethylene, with a coating, 0 % 31.12.2015
— of a weight of more than 80 g/m² but not more than 105 g/m² and — an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 5603 14 90 30 Non-wovens, consisting of a central elastomeric film laminated on each side with 0 % 31.12.2013
spunbonded filaments of polypropylene, of a weight of 200 g/m 2 or more but not more than 300 g/m 2
ex 5603 92 90 20 Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer 0 % 31.12.2013 laminated on each side with spunbonded filaments of polypropylene
ex 5603 93 90 20
ex 5603 92 90 70 Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and 0 % 31.12.2013 staple fibres of polypropylene and polyester, whether or not laminated on one side or
ex 5603 94 90 40 on both sides with spunbonded filaments of polypropylene, of a total thickness of not
more than 50 mm
ex 5603 92 90 80 Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each 0 % 31.12.2016 side with polyolefin filaments:
ex 5603 93 90 50
— of a thickness of not more than 550 µm, — a weight of 25 g/m² or more but not more than 150 g/m², — in the piece or simply cut into squares or rectangles, — not impregnated, — with cross-directional or machine-directional stretch properties, for use in the manufacture of infant/child care products (1)
ex 5603 94 90 20 Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of 0 % 31.12.2013 pen tips(1)
ex 5607 50 90 10 Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers 0 % 31.12.2014 with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical
sutures(1) ex 5803 00 10 91 Gauze of cotton, of a width of less than 1 500 mm 0 % 31.12.2013 ex 5903 10 90 10 Knitted or woven fabrics, coated or covered on one side with artificial plastic 0 % 31.12.2013
material in which are embedded microspheres ex 5903 20 90 10 ex 5903 90 99 20
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 5906 99 90 10 Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns 0 % 31.12.2013 of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-
phenylenediamine and 3,4’-oxybis(phenyleneamine) ex 5907 00 00 10 Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of 0 % 31.12.2016
not more than 150 µm ex 5911 10 00 10 Needle-punched synthetic-fibre felts, not containing polyester, whether or not 0 % 31.12.2013
containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products(1)
ex 5911 90 90 30 Parts of equipment for the purification of water by reverse osmosis, consisting 0 % 31.12.2013 essentially of plastic-based membranes, supported internally by woven or non-woven
ex 8421 99 00 92 textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not
housed in a cylinder of a wall-thickness of 5 mm or more ex 5911 90 90 40 Multi-layered non-woven polyester polishing pads, impregnated with polyurethane 0 % 31.12.2014 ex 6805 10 00 10 Abrasive in the form of identically shaped particles on a support 0 % 31.12.2013 ex 6805 20 00 10 ex 6805 30 00 10 ex 6813 89 00 10 Friction material, of a thickness of less than 20 mm, not mounted, for the 0 % 31.12.2013
manufacture of friction components of a kind used in automatic transmissions and clutches(1)
ex 6903 90 90 20 Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion 0 % 31.12.2013 and oxidation furnaces for production of semiconductor materials
ex 6909 19 00 20 Silicon nitride (Si 3 N 4 ) rollers or balls 0 % 31.12.2015
ex 6909 19 00 30 Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an 0 % 31.12.2013
overall volume of not more than 65 l, having, per cm 2 of the cross-section, not less
than one continuous channel which may be open at both ends or stopped at one end ex 6909 19 00 50 Ceramic articles made of continuous filaments of ceramic oxides, containing by 0 % 31.12.2013
weight: ex 6914 90 00 20
— 2 % or more of diboron trioxide, — 28 % or less of silicon dioxide and
EN 109 EN
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 6909 19 00 60 Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon 0 % 31.12.2013 carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total
volume of not more than 65 litres, having, per cm² of the surface of the cross section one or more closed channels at the tail end
ex 6909 19 00 70 Supports for catalysts or filters, consisting of porous ceramics made primarily from 0 % 31.12.2013 oxides of aluminium and titanium; with a total volume of not more than 65 litres and
at least one duct (open on one or both ends) per cm² of cross section ex 6909 19 00 80 Ceramic heat sinks, containing by weight: 0 % 31.12.2016
— 66 % or more of silicon carbide, — 15 % or more of aluminium oxide for maintaining the operating temperature of transistors, diodes and integrated circuits in products of headings 8521 and 8528 (1)
ex 6914 90 00 30 Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium 0 % 31.12.2013 dioxide, of a diameter of more than 125 µm
ex 7002 10 00 10 Balls of E-glass, of a diameter of 18,5 mm or more but not more than 26 mm 0 % 31.12.2013 ex 7005 10 25 10 Float glass: 0 % 31.12.2012
— of a thickness of 2,0 mm or more but not more than 2,4 mm, — coated on one surface with a fluorine doped tin dioxide reflective layer
ex 7005 10 30 10 Float glass: 0 % 31.12.2012 — of a thickness of 4,0 mm or more but not more than 4,2 mm,
— with a light transmission of 91 % or more measured using a D-type light source, — coated on one surface with a fluorine doped tin dioxide reflective layer
ex 7006 00 90 50 Glass plate of a diagonal size of 81 cm or more, but not more than 186 cm, provided 0 % 31.12.2013 either with a mesh film or a sputtered conductive layer for EMC shielding and a nearinfrared
absorbing film, with optional additional anti-reflex/colour enhancement layers on one or both sides
ex 7006 00 90 60 Soda-lime glass plates with: 0 % 31.12.2012 ex 8529 90 92 46 — a strain point of more than 570 °C
— a thickness of 1,7 mm or more but not more than 2,9 mm
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— dimensions of 1 144 mm (± 0,5 mm) x 670 mm (± 0,5 mm) or 1 164 mm (± 0,5 mm) x 649 mm (± 0,5 mm) and — whether or not containing: — an indium-tin oxide film, or — a grid of electrodes made from silver paste covered by dielectric material
ex 7006 00 90 70 Float glass: 0 % 31.12.2016 — with a thickness of 1,7 mm or more but not more than 1,9 mm,
— with light transmission of 91 % or more, measured with a D-type light source, — coated on one side with fluorine-doped tin dioxide as a reflecting layer, — with worked edges
ex 7007 19 20 10 Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 0 % 31.12.2013 185,42 cm (± 1,5 cm), consisting of tempered glass; provided either with a mesh film
and a near-infrared absorbing film or a sputtered conductive layer, with optional
additional anti-reflex layer on one or both sides, for use in the manufacture of
products falling within heading 8528(1)
ex 7007 19 20 20 Tempered or semi-tempered glass plate of a diagonal size of 81 cm or more, but not 0 % 31.12.2012
more than 186 cm, with one or more polymer layers, whether or not painted or with
coloured or black ceramics around the surrounding edges, for use in the manufacture
of goods falling within heading 8528(1)
ex 7007 29 00 10 Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 0 % 31.12.2013
185,42 cm (± 1,5 cm), consisting of 2 sandwich plates laminated together; provided
either with a mesh film and a near-infrared absorbing film or a sputtered conductive
layer, with optional additional anti-reflex layer on one or both sides
ex 7009 91 00 10 Unframed glass mirrors with: 0 % 31.12.2015
— a length of 1516 mm (± 1 mm);
— a width of 553 mm (± 1 mm);
— a thickness of 3 mm (± 0,1 mm);
— the back of the mirror covered with protective polyethylene (PE) film,
with a thickness of 0,11 mm or more but not more than 0,13 mm;
— a lead content of not more than 90 mg/kg and
— a corrosion resistance of 72 hours or more according to ISO 9227 salt
spray test
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 7011 10 00 10 Glass lenses with a stippled front refractor or with a front refractor composed of 0 % 31.12.2013 prismatic elements, with an external diameter of more than 121 mm but not more
than 125 mm
7011 20 00 Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without 0 % 31.12.2013 fittings, for cathode ray tubes
ex 7014 00 00 10 Optical elements of glass (other than those of heading 7015), not optically worked, 0 % 31.12.2013 other than signalling glassware
ex 7019 12 00 01 Rovings, measuring 2 600 tex or more but not more than 3 300 tex and of a loss on 0 % 31.12.2013 ignition of 4 % or more but not more than 8 % by weight (as determined by the
ex 7019 12 00 21 ASTM D 2584-94 method)
ex 7019 12 00 02 Rovings, measuring 650 tex or more but not more than 2 500 tex, coated with a layer 0 % 31.12.2013 of polyurethane whether or not mixed with other materials
ex 7019 12 00 22 ex 7019 12 00 03 Rovings, measuring 392 tex or more but not more than 2 884 tex, coated with a layer 0 % 31.12.2013
of an acrylic copolymer ex 7019 12 00 23 ex 7019 12 00 04 Rovings, measuring 417 tex or more but not more than 3 180 tex, coated with a layer 0 % 31.12.2013
of poly(sodium acrylate) and poly(acrylic acid) ex 7019 12 00 24 ex 7019 19 10 10 Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass 0 % 31.12.2013
filaments of a nominal diameter of 3,5 µm or of 4,5 µm, in which filaments of a
diameter of 3 µm or more but not more than 5,2 µm predominate, other than those
treated so as to improve their adhesion to elastomers
ex 7019 19 10 20 Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun 0 % 31.12.2015
glass filaments, in which filaments of a diameter of 4,83 µm or more but not more
than 5,83 µm predominate
ex 7019 19 10 25 Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous glass 0 % 31.12.2015
spun filaments, in which filaments of a diameter of 4,83 µm or more but not more
than 5,83 µm predominate
ex 7019 19 10 30 Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments 0 % 31.12.2013
of a nominal diameter of 7 µm, in which filaments of a diameter of 6,35 µm or more
but not more than 7,61 µm predominate
ex 7019 19 10 50 Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass 0 % 31.12.2016
filaments, containing 93 percent by weight or more of silicon dioxide, of a nominal
diameter of 6 µm or 9 µm, other than those treated
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 7019 19 10 55 Glass cord impregnated with rubber or plastic, obtained from K or U glass filaments, 0 % 31.12.2014 made up of:
— 9 % or more but not more than 16 % of magnesium oxide, — 19 % or more but not more than 25 % of aluminium oxide, — 0 % or more but not more than 2 % of boron oxide, — without calcium oxide, coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene
ex 7019 19 10 60 High modulus glass cord (K) impregnated with rubber, obtained from twisted high 0 % 31.12.2013 modulus glass filament yarns, coated with a latex comprising a resorcinolex
7019 90 00 30 formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrilebutadiene rubber (HNBR)
ex 7019 19 10 70 Glass cord impregnated with rubber or plastic, obtained from twisted glass filament 0 % 31.12.2013 yarns, coated with a latex comprising at least a resorcinol-formaldehydeex
7019 90 00 20 vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)
ex 7019 19 10 80 Glass cord impregnated with rubber or plastic, obtained from twisted glass filament 0 % 31.12.2013 yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and
ex 7019 90 00 40 chlorosulphonated polyethylene
ex 7019 39 00 50 Non-woven product of non-textile glass fibre, for the manufacture of air filters or 0 % 31.12.2016 catalysts(1)
ex 7019 40 00 11 Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of 0 % 31.12.2013 thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650)
ex 7019 40 00 19 of:
— 10 ppm per °C or more but not more than 12 ppm per °C in the length and width, and — 20 ppm per °C or more but not more than 30 ppm per °C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)
ex 7019 90 00 10 Non-textile glass fibres in which fibres of a diameter of less than 4,6 µm predominate 0 % 31.12.2013 ex 7201 10 11 10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 0 % 31.12.2016
150 mm, a height of not more than 150 mm ex 7201 10 30 10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 0 % 31.12.2016
150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
7202 50 00 Ferro-silico-chromium 0 % 31.12.2013 ex 7202 99 80 10 Ferro-dysprosium, containing by weight: 0 % 31.12.2015
— 78 % or more of dysprosium, and — 18 % or more but not more than 22 % of iron
ex 7320 90 10 91 Flat spiral spring of tempered steel, with: 0 % 31.12.2013 — a thickness of 2,67 mm or more, but not more than 4,11 mm,
— a width of 12,57 mm or more, but not more than 16,01 mm, — a torque of 18,05 Nm or more, but not more than 73,5 Nm — an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218° for use in the manufacture of tensioners for power transmission belts, for internal combustion engines(1)
ex 7325 99 10 20 Anchor head of hot dipped galvanized ductile cast iron of the kind used in the 0 % 31.12.2014 production of earth anchors
ex 7326 20 00 20 Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,017 mm 0 % 31.12.2016 or more but not more than 0,070 mm, compacted by sintering and rolling
ex 7410 21 00 10 Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium 0 % 31.12.2013 dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with
copper foil ex 7410 21 00 30 Film of polyimide, whether or not containing epoxide resin and/or glass fibre, 0 % 31.12.2013
covered on one side or on both sides with a copper foil ex 7410 21 00 40 Sheet or plates 0 % 31.12.2013
— consisting of at least a central layer of paper or one central sheet of any
type of nonwoven fibre, laminated on each side with glass-fibre fabric and
impregnated with epoxide resin, or
— consisting of multiple layers of paper, impregnated with phenolic resin,
coated on one or both sides with a copper film with a maximum thickness of 0,15
mm
ex 7410 21 00 50 Plates 0 % 31.12.2013
— consisting of at least one layer of fibreglass fabric impregnated with
epoxide resin,
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— covered on one or both sides with copper foilwith a thickness of not more than 0,15 mm and — with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC- TM-650
ex 7419 99 90 91 Disc (target) with deposition material, consisting of molybdenum silicide: 0 % 31.12.2013 ex 7616 99 90 60 — containing 1 mg/kg or less of sodium and
— mounted on a copper or aluminium support ex 7601 20 99 10 Sheets and billets of secondary aluminium alloy containing lithium 0 % 31.12.2012 ex 7604 21 00 10 Profiles made of aluminium alloy conforming to EN standard AW-6063 T5 0 % 31.12.2013 ex 7604 29 90 30 — anodized
— whether or not lacquered — with a wall thickness of 0,5 mm (± 1,2 %) or more but not more than 0,8 mm (± 1,2 %) for use in the manufacture of goods of subheading 8302 (1)
ex 7604 29 10 10 Sheets and bars of aluminium-lithium alloys 0 % 31.12.2015 ex 7606 12 99 20 ex 7605 19 00 10 Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, 0 % 31.12.2013
covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm
ex 7606 12 92 20 Aluminium and magnesium alloy strip: 0 % 31.12.2012 ex 7607 11 90 20 — in rolls,
— of a thickness of 0,14 mm or more but not more than 0,40 mm, — a width of 12,5 mm or more but not more than 359 mm,
— a tensile strength of 285 N/mm 2 or more, and
— an elongation at break of 1 % or more, and containing by weight: — 93,3 % or more of aluminium,
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— 2,2 % or more but not more than 5 % of magnesium, and — not more than 1,8 % of other elements
ex 7607 11 90 10 Plain aluminium foil with the following parameters: 0 % 31.12.2016 — an aluminium content of 99,98 % or more
— a thickness of 0,070 mm or more but not more than 0,125 mm — with a cubic texture of a kind used for high voltage etching(1)
ex 7607 11 90 30 Laminated aluminium foil with: 0 % 31.12.2016 — 99 % or more of aluminium,
— a silica and water glass free hydrophilic coating, — a total thickness of not more than 0,120 mm, — a tensile strength of 100 N/mm² or more (as determined by test method ASTM E8), and — an elongation at break of 1 % or more
ex 7607 20 90 10 Aluminium laminated film of a total thickness of not more than 0,123 mm, 0 % 31.12.2012 comprising of a layer of aluminium of a thickness of not more than 0,040 mm,
polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries(1)
ex 7607 20 90 20 Lubricating entry sheet of a total thickness of not more than 350 µm, comprising of: 0 % 31.12.2015 — a layer of aluminium foil of a thickness of 70 µm or more but not more
than 150 µm, — a water soluble lubricant of a thickness of 20 µm or more but not more than 200 µm and solid at room temperature, for use in the manufacture of printed circuit boards (1)
ex 7613 00 00 20 Aluminium container, seamless, for compressed natural gas or compressed hydrogen, 0 % 31.12.2013 wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage
capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg ex 7616 99 90 15 Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts 0 % 31.12.2013 8104 11 00 Unwrought magnesium, containing at least 99,8 % by weight of magnesium 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8104 30 00 10 Magnesium powder: 0 % 31.12.2015 — of purity by weight of 98 % or more,
— with a particle size of 0,2 mm or more but not more than 0,8 mm ex 8104 90 00 10 Ground and polished magnesium sheets, of dimensions not more than 0 % 31.12.2013
1 500 mm× 2 000 mm, coated on one side with an epoxy resin insensitive to light ex 8108 20 00 10 Titanium sponge 0 % 31.12.2013 ex 8108 20 00 20 Raw ingots from the fusion of titanium and titanium alloys, of a diameter of not more 0 % 31.12.2013
than 380 mm ex 8108 20 00 30 Titanium powder of which 90 % by weight or more passes through a sieve with an 0 % 31.12.2013
aperture of 0,224 mm ex 8108 30 00 10 Waste and scrap of titanium and titanium alloys, except those containing by weight 0 % 31.12.2013
1 % or more but not more than 2 % of aluminium ex 8108 90 30 10 Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 65040 0 % 31.12.2014 ex 8108 90 30 20 Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or 0 % 31.12.2012
more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708 92 or 8714 10 00(1)
ex 8108 90 30 30 Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with 0 % 31.12.2015 AMS standards 4928 and 4967
ex 8108 90 50 10 Alloy of titanium and aluminium, containing by weight 1 % or more but not more 0 % 31.12.2013 than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not
more than 3,1 mm, of a width of 1 000 mm or more but not more than 1 254 mm, for the manufacture of goods of subheading 8714 10 00(1)
ex 8108 90 50 20 Alloy of titanium, aluminium and vanadium, containing by weight 2,5 % or more but 0 % 31.12.2013 not more than 3,5 % of aluminium and 2,0 % or more but not more than 3,0 % of
vanadium, in sheets or rolls, of a thickness of 0,6 mm or more but not more than
0,9 mm, of a width of not more than 1 000 mm, for the manufacture of goods of
subheading 8714 10 00(1)
ex 8108 90 50 30 Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0 % 31.12.2012
0,60 % of silicon, in sheets or rolls, for use in the manufacture of:
— exhaust systems for internal combustion engines or
— tubes and pipes of subheading 8108 90 60
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
(1) ex 8108 90 50 40 Titanium-alloy sheets for the manufacture of structural parts of aircrafts(1) 0 % 31.12.2012 ex 8108 90 50 50 Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing 0 % 31.12.2012
by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium
ex 8108 90 50 60 Plates, sheets, strips and foils of an alloy of titanium, aluminium, silicon and 0 % 31.12.2013 niobium, containing by weight:
— 0,4 % or more but not more than 0,6 % of aluminium, — 0,35 % or more but not more than 0,55 % of silicon and — 0,1 % or more but not more than 0,3 % of niobium
ex 8109 20 00 10 Non-alloy zirconium, in the form of ingots, containing by weight more than 0,01 % 0 % 31.12.2013 of hafnium, for use in the manufacture of tubes for the chemical industry(1)
ex 8110 10 00 10 Antimony in the form of ingots 0 % 31.12.2013
ex 8112 99 30 10 Alloy of niobium (columbium) and titanium, in the form of bars and rods 0 % 31.12.2013
ex 8113 00 90 10 Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits 0 % 31.12.2012
ex 8302 42 00 80 Ratchet disk of a kind used in the manufacture of reclining car seats 0 % 31.12.2015
ex 9401 90 80 10
ex 8305 20 00 10 Staples of a width of 12 mm (± 1 mm) and a depth of 8 mm (± 1 mm) for use in 0 % 31.12.2013
copiers and printers(1)
ex 8309 90 90 10 Aluminium can ends with so-called "ring pull" full aperture with a diameter of 0 % 31.12.2013
136,5 mm (± 1 mm)
ex 8401 30 00 20 Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors(1) 0 % 31.12.2013
ex 8405 90 00 10 Metal casing for automobile safety belt pre-tension gas generators 0 % 31.12.2014
ex 8708 21 10 10
EN 118 EN
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8407 31 00 10 Two stroke internal combustion engines, of a cylinder capacity of not more than 0 % 31.12.2012
30 cm 3 for use in the manufacture of portable motorised scooters falling within
subheading 8711 10 00(1) ex 8407 33 00 10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a 0 % 31.12.2012
cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW but not
ex 8407 90 80 10 exceeding 20,0 kW, for the manufacture of: ex 8407 90 90 10 — self-propelled lawn mowers, with a seat of sub-heading 8433 11 51
— tractors of subheading 8701 90 11, whose main function is that of a lawn mower — four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 8433 20 10 or — snowploughs and snow blowers of subheading 8430 20 (1)
ex 8407 90 10 10 Four-stroke petrol engines of a cylinder capacity of not more than 250 cm³ for use in 0 % 31.12.2016 the manufacture of lawnmowers of sub-heading 8433 11, mowers with motor of
subheading 8433 20 10, rotovators of sub-heading 8432 29 50, garden shredders of sub-heading 8436 80 90 or scarifiers of subheading 8432 29 10(1)
ex 8407 90 10 20 Two-stroke internal combustion engines, having a cylinder capacity of not more than 0 % 31.12.2013
125 cm 3 , for the manufacture of lawnmowers of sub-heading 8433 11 or
snowploughs and snow blowers of subheading 8430 20(1) ex 8407 90 90 20 Compact Liquid Petroleum Gas (LPG) Engine System, with: 0 % 31.12.2015
— 6 cylinders, — an output of 75 kW or more, but not more than 80 kW, — inlet and exhaust valves modified to operate continuously in heavy duty applications, for use in the manufacture of vehicles of heading 8427 (1)
ex 8408 90 41 20 Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in 0 % 31.12.2013 the manufacture of vehicle mounted temperature control systems(1)
ex 8408 90 43 20 Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the 0 % 31.12.2013 manufacture of vehicle mounted temperature control systems(1)
ex 8409 99 00 10 Injectors with solenoid valve for optimised atomisation in the engine combustion 0 % 31.12.2016 chamber
ex 8479 90 80 85
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8412 21 80 50 Hydraulic cylinder of a kind used in the manufacture of a wheel loader bucket 0 % 31.12.2016 ex 8413 70 35 20 Single phase centrifugal pump: 0 % 31.12.2015
— discharging at least 400 cm³ fluid per minute — with a noise level limited to 6 dBA, — with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, and — working at ambient temperatures down to -10°C
ex 8414 30 81 50 Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal 0 % 31.12.2014 power rating of 0,5 kW or more but not more than 10 kW, with a displacement
volume of not more than 35 cm 3 , of the type used in refrigeration equipment
ex 8414 30 89 20 Vehicle air conditioning system part, consisting of an open shaft reciprocating 0 % 31.12.2013 compressor of a power of more than 0,4 kW but not more than 10 kW
ex 8414 59 20 30 Axial fan: 0 % 31.12.2013 — with an electric motor,
— of an output of not more than 125 W for use in the manufacture of computers(1)
ex 8414 59 20 40 Axial fan with an electric motor, of an output of not more than 2 W, for use in the 0 % 31.12.2015 manufacture of products of heading 8528 (1)
ex 8414 90 00 20 Aluminium pistons, for incorporation into compressors of air conditioning machines 0 % 31.12.2014 of motor vehicles(1)
ex 8414 90 00 30 Pressure-regulating system, for incorporation into compressors of air conditioning 0 % 31.12.2013 machines of motor vehicles(1)
ex 8414 90 00 40 Drive part, for compressors of air conditioning machines of motor vehicles(1) 0 % 31.12.2013 ex 8415 90 00 20 Evaporator made of aluminium for use in the manufacture of air conditioning 0 % 31.12.2016
machines for automobiles(1) ex 8418 99 10 50 Evaporator composed of aluminium fins and a copper coil of the kind used in 0 % 31.12.2014
refrigeration equipment ex 8418 99 10 60 Condenser composed of two concentric copper tubes of the kind used in refrigeration 0 % 31.12.2014
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
equipment ex 8419 89 98 30 Apparatus for vapour deposition of parylene for use in the manufacture of drug 0 % 31.12.2012
eluting stents(1) ex 8419 89 98 40 Solution preparation apparatus for the treatment of materials by a process involving a 0 % 31.12.2012
change of temperature for use in the manufacture of drug-eluting stents(1) ex 8421 99 00 91 Parts of equipment, for the purification of water by reverse osmosis, consisting of a 0 % 31.12.2013
bundle of hollow fibres of artificial plastic material with permeable walls, embedded
in a block of artificial plastic material at one end and passing through a block of
artificial plastic material at the other end, whether or not housed in a cylinder
ex 8421 99 00 93 Components of separators for the separation or purification of gases from gas 0 % 31.12.2013
mixtures, consisting of a bundle of permeable hollow fibres enclosed within a
container, whether or not perforated, of an overall length of 300 mm or more but not
more than 3 700 mm and a diameter of not more than 500 mm
ex 8422 30 00 10 Machines and apparatus, other than injection moulding machines, for the 0 % 31.12.2013
manufacture of ink-jet printer cartridges(1)
ex 8479 89 97 30
ex 8439 99 00 10 Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy 0 % 31.12.2013
steel tubes, of a length of 3 000 mm or more and an external diameter of 550 mm or
more
ex 8462 21 80 10 Numerically controlled stent crimping machine comprising a base, a pneumatic crimp 0 % 31.12.2012
head and a motorised product positioning mechanism (V-block) to crimp a stent onto
the balloon of a catheter using radial pressure in the manufacture of drug eluting
stents(1)
ex 8467 99 00 10 Mechanical switches for connecting electrical circuits, with: 0 % 31.12.2014
ex 8536 50 11 35 — a voltage of 14,4 V or more but not more than 42 V,
— an amperage of 10 A or more but not more than 42 A,
for use in the manufacture of machines falling within heading 8467
(1)
ex 8477 59 80 10 Machinery for working rubber or plastic for use in the manufacture of drug-eluting 0 % 31.12.2012 stents(1)
ex 8477 80 99 10 Machines for casting or for surface modification of plastic membranes of 0 % 31.12.2013 heading 3921
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8479 89 97 40 Isobaric pressure exchanger with a flow rate of not more than 50 m 3 /hr, whether or 0 % 31.12.2014
not with a booster pump ex 8479 89 97 50 Machinery, being components of a production line for the manufacture of lithium ion 0 % 31.12.2015
batteries for passenger electric motor vehicles, for the construction of such a
ex 8479 90 80 80 production line
(1)
ex 8481 30 91 91 Steel check (non-return) valves with: 0 % 31.12.2014 — an opening pressure of not more than 800 kPa
— an external diameter not more than 37 mm
ex 8481 80 59 10 Air control valve, consisting of a stepping motor and a valve pintle, for the regulation 0 % 31.12.2013 of idle air flow in fuel injection engines
ex 8481 80 79 20 Solenoid valve device that can withstand a pressure of 875 bar 0 % 31.12.2013 ex 8481 80 99 50 Service valve, consisting a combination of a two way valve on the liquid line and a 0 % 31.12.2016
three way valve on the gas line with: — a minimum enclosing pressure of 30 kgf/cm², — a minimum withstanding pressure of 45 kgf/cm², for use in the manufacture of outdoor air conditioning units(1)
ex 8481 80 99 60 Four way valve, consisting of: 0 % 31.12.2016 — a core plunger,
— a sealing plunger, — a 220 V-240 V AC 50/60 Hz solenoid coil, — a working pressure up to 4,3 MPa, — a housing for directing the flow of the refrigerant, for use in the manufacture of outdoor air conditioning units(1)
ex 8483 40 29 50 Gear set of cycloid gear type with: 0 % 31.12.2016
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— a rated torque of 50 Nm or more but not more than 7000 Nm, — standard ratios of 1:50 or more but not more than 1:270, — lost motion of not more than one arc minute, — an efficiency of more than 80 %, of a kind used in robot arms
ex 8483 40 51 20 Gear box, having a differential with wheel axle, for use in the manufacture of self 0 % 31.12.2013 propelled lawnmowers with a seat of subheading 8433 11 51(1)
ex 8483 40 59 20 Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, 0 % 31.12.2013 for use in the manufacture of self-propelled lawnmowers with a seat of subheading
8433 11 51(1) ex 8483 40 90 80 Transmission gearbox, with: 0 % 31.12.2015
— not more than 3 gears, — an automatic deceleration system and — a power reversal system, for use in the manufacture of goods of heading 8427 (1)
ex 8501 10 99 54 DC motor, brushless, with an external diameter of not more than 25,4 mm, a rated 0 % 31.12.2013 speed of 2 260 (±15 %) rpm or 5 420 (±15 %) rpm, a supply voltage of 1,5 V or 3 V
ex 8501 10 99 79 DC motor with brushes and an internal rotor with a three-phase winding, whether or 0 % 31.12.2013 not equipped with a worm, of a specified temperature range covering at least - 20 °C
to + 70 °C ex 8501 10 99 80 DC stepping motor, with: 0 % 31.12.2013
— an angle of step of 7,5° (± 0,5°), — a pull-out torque at 25 °C of 25 mNm or more, — a pull-out pulse rate of 1 960 pps or more, — a two-phase winding, and — a rated voltage of 10,5 V or more, but not more than 16,0 V
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8501 10 99 81 DC stepping motor, with an angle of step of 18 ° or more, a holding torque of 0,5 0 % 31.12.2013 mNm or more, a coupling bracket the exterior dimensions of which do not exceed
22 mm x 68 mm, a two phase winding and an output of not more than 5 W ex 8501 10 99 82 DC motor, brushless, with an external diameter of not more than 29 mm, a rated 0 % 31.12.2013
speed of 1 500 (±15 %) rpm or 6 800 (±15 %) rpm, a supply voltage of 2 V or 8 V ex 8501 31 00 30 DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or 0 % 31.12.2016
more, but not more than 115 mm, a nominal torque of 2,23 Nm (± 1,0 Nm), of an
output of more than 120 W but not more than 520 W, calculated with 1 550 rpm
(± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors
using the Hall effect, for use with an electric power steering control module (power
steering motor)(1)
ex 8501 31 00 40 Permanently excited DC-motor with 0 % 31.12.2014
— a multiple-phase winding,
— an external diameter of 30 mm or more, but not more than 80 mm,
— a rated speed of not more than 15 000 rpm,
— an output of 45 W or more but not more than 300 W and
— a supply voltage of 9 V or more but not more than 25 V
ex 8501 33 00 30 Electric drive for motor vehicles, with an output of not more than 315 kW, with: 0 % 31.12.2016 ex 8501 40 80 50 — an AC or DC motor with transmission, ex 8501 53 50 10 — power electronics connected by cable
ex 8501 51 00 30 AC synchronous servo motor with resolver and brake for a maximum speed of not 0 % 31.12.2016 more than 6000 rounds per minute, with:
ex 8501 52 20 50
— an output of 340 W or more but not more than 7,4 kW, — a flange of dimensions of not more than 180 mm × 180 mm, and — a length from flange to extreme end of resolver of not more than 271 mm
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8503 00 91 31 Rotor, at the innerside provided with one or two magnetic rings whether or not 0 % 31.12.2013 incorporated in a steel ring
ex 8503 00 99 32
ex 8503 00 99 31 Stamped collector of an electric motor, having an external diameter of not more than 0 % 31.12.2013 16 mm
ex 8503 00 99 33 Stator for brushless motor of electrical power steering with a roundness tolerance 0 % 31.12.2016 of 50 µm
ex 8503 00 99 34 Rotor for brushless motor of electrical power steering with a roundness tolerance of 0 % 31.12.2016 50 µm
ex 8503 00 99 35 Transmitter resolver for brushless motors of electrical power steering 0 % 31.12.2014 ex 8504 31 80 20 Transformer for use in the manufacture of inverters in LCD modules(1) 0 % 31.12.2012 ex 8504 31 80 30 Switching transformers, having a power handling capacity of not more than 1 kVA 0 % 31.12.2013
for use in the manufacture of static converters(1) ex 8504 40 90 20 Direct current to direct current converter 0 % 31.12.2013 ex 8504 40 90 30 Static converter comprising a power switch with insulated-gate bipolar transistors 0 % 31.12.2013
(IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 8516 50 00(1)
ex 8504 40 90 40 Semiconductor power modules comprising: 0 % 31.12.2013 — power transistors,
— integrated circuits, — whether or not containing diodes and with or without thermistors, — an operating voltage of not more than 600 V, — not more than three electrical outputs each containing two power switches (whether MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, and — a rms (root mean square) current rating of not more than 15,7 A
ex 8504 50 95 20 Inductor with an inductance of not more than 62 mH 0 % 31.12.2013
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8504 50 95 30 Multilayer monolithic inductors, contained in a housing of the SMD (surface 0 % 31.12.2013 mounted device) type the exterior dimensions of which do not exceed 1,8 mm x 3,4
mm, for use in the manufacture of products falling within subheading 8517 11 00, 8517 12 00 or 8517 69 31(1)
ex 8504 50 95 40 Coil choke with: 0 % 31.12.2015 — an inductance of 4,7 µH (± 20 %),
— a DC resistance of not more than 0,1 Ohms, — an insulation resistance of 100 MOhms or more at 500 V (DC) for use in the manufacture of LCD and LED module power boards (1)
ex 8504 90 11 10 Ferrite cores, other than for deflection yokes 0 % 31.12.2013 ex 8505 11 00 31 Ferrite magnet having a remanence of 455 mT (±15 mT) 0 % 31.12.2013 ex 8505 11 00 33 Magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a 0 % 31.12.2013
rounded rectangle with measurements of not more than 15 mm x10 mm x 2 mm, or in
the shape of a disc with a diameter of not more than 90 mm, whether or not
containing a hole in the centre
ex 8505 19 90 31 Neodymium-ferro ring with an external diameter of not more than 13 mm, an internal 0 % 31.12.2013
diameter of not more than 9 mm
ex 8505 20 00 30 Electromagnetic clutch, for use in the manufacture of compressors of air conditioning 0 % 31.12.2013
machines of motor vehicles(1)
ex 8505 90 20 91 Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal 0 % 31.12.2013
DC of 0,08 A, for use in the manufacture of products falling within heading No
8517(1)
ex 8506 50 90 10 Lithium iodine single cell battery the dimensions of which do not exceed 9 mm 0 % 31.12.2013
× 23 mm × 45 mm and a voltage of not more than 2,8 V
ex 8506 50 90 20 Unit consisting of not more than 2 lithium batteries embedded in a socket for 0 % 31.12.2013
integrated circuits (battery-buffered socket), with not more than 32 connections and
incorporating a control circuit
ex 8506 50 90 30 Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of 0 % 31.12.2013
not more than 28 mm x 45 mm x 15 mm and a capacity of not less than 1,05 Ah
ex 8507 10 20 80 Lead acid starter battery, with: 0 % 31.12.2015
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— a charge acceptance capacity of 200 % or more of the level of an equivalent conventional flooded battery during the first 5 seconds of charge, — a liquid electrolyte, for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with high regenerative alternator controls (1)
ex 8507 30 20 30 Cylindrical nickel-cadmium accumulator, with a length of 65,3 mm (±1,5 mm) and a 0 % 31.12.2013 diameter of 14,5 mm (±1 mm), having a nominal capacity of 1 000 mAh or more, for
use in the manufacture of rechargeable batteries(1) ex 8507 50 00 20 Rectangular accumulator, with a length of not more than 69 mm, a width of not more 0 % 31.12.2013
than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of
ex 8507 60 00 20 rechargeable batteries(1)
ex 8507 50 00 30 Cylindrical nickel-hydride accumulator, of a diameter of not more than 14,5 mm, for 0 % 31.12.2013 the manufacture of rechargeable batteries(1)
ex 8507 60 00 30 Cylindrical lithium-ion accumulator, with a length of 63 mm or more and a diameter 0 % 31.12.2014 of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the
manufacture of rechargeable batteries(1) ex 8507 60 00 60 Lithium-ion rechargeable batteries, with: 0 % 31.12.2015
— a length of 1 213 mm or more, but not more than 1 575 mm, — a width of 245 mm or more but not more than 1 200 mm, — a height of 265 mm or more, but not more than 755 mm, — a weight of 265 kg or more but not more than 294 kg, — a nominal capacity of 66,6 Ah, put up in packs of 48 modules
ex 8507 60 00 70 Rectangular modules for incorporation in lithium-ion rechargeable batteries: 0 % 31.12.2015 — of a length of 350 mm or 312 mm,
— of a width of 79,8 mm or 225 mm, — of a height of 168 mm or 35 mm, — of a weight of 6,2 kg or 3,95 kg,
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— with a rating of 129 Ah or 66,6 Ah
ex 8507 60 00 80 Rectangular lithium-ion-accumulator, with 0 % 31.12.2015 — a metal casing,
— a length of 171 mm (± 3 mm), — a width of 45,5 mm (± 1 mm), — a height of 115 mm (± 1 mm), — a nominal voltage of 3,75 V and — a nominal capacity of 50 Ah for use in the manufacture of rechargeable batteries for motor vehicles (1)
ex 8508 70 00 10 Electronic circuit card without separate housing for actuating and controlling vacuum 0 % 31.12.2015 cleaner brushes powered by not more than 300 W
ex 8537 10 99 96
ex 8508 70 00 20 Electronic circuit cards that 0 % 31.12.2015 ex 8537 10 99 98 — are connected by wire or radio frequency to each other and the motor
controller card, and — regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program, — whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)
ex 8516 90 00 60 Ventilation sub-assembly of an electric deep-fat fryer 0 % 31.12.2014 — fitted with a motor having a power rating of 8 W at 4600 revolutions per
minute, — governed by an electronic circuit, — operating at ambient temperatures above 110 °C, — fitted with a thermoregulator
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8518 30 95 20 Headphone and earphone for hearing aids, contained in a housing the exterior 0 % 31.12.2013 dimensions of which, excluding connecting points, do not exceed 5 mm × 6
mm × 8 mm ex 8518 40 80 91 Circuit board sub-assembly, comprising digital audio signal decoding, audio signal 0 % 31.12.2014
processing and amplification with dual and/or multi-channel functionality ex 8518 40 80 92 Circuit board sub-assembly, comprising power supply, active equalizer and power 0 % 31.12.2015
amplifier circuits ex 8518 90 00 91 Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided 0 % 31.12.2013
with a cylinder, for use in the manufacture of loudspeakers(1) ex 8519 81 35 10 Unmounted or incomplete assembly, comprising at least one optical unit and DC 0 % 31.12.2013
motors and operational control circuit, with digital/analogue converter, for use in the
manufacture of CD players, radio-broadcast receivers of a kind used in motor
vehicles or navigational aid apparatus(1)
ex 8521 90 00 20 Digital video recorder: 0 % 31.12.2014
— without a hard disk drive,
— with or without a DVD-RW drive,
— with either motion detection or capability of motion detection through IP
connectivity via LAN connector
— with or without a USB serial port,
for use in the manufacture of Closed-circuit television (CCTV) surveillance systems
(1)
ex 8522 90 49 50 Electronic assembly for a laser read-head of a compact disc player, comprising: 0 % 31.12.2013
— a printed circuit,
— a photo-detector, in the form of a monolithic integrated circuit, contained
in a housing,
— not more than 3 connectors,
— not more than 1 transistor,
— not more than 3 variable and 4 fixed resistors,
— not more than 5 capacitors,
the whole mounted on a support
ex 8522 90 49 60 Printed circuit board assembly comprising: 0 % 31.12.2014
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8527 99 00 10 — a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities,
ex 8529 90 65 25
— a microprocessor capable of receiving remote control messages and controlling the tuner chipset, for use in the manufacture of home entertainment systems(1)
ex 8522 90 49 65 Printed circuit board subassembly, comprising: 0 % 31.12.2014 ex 8527 99 00 20 — a radio tuner, capable of receiving and decoding radio signals and
transmitting those signals within the assembly, with a signal decoder, ex 8529 90 65 40
— a radio frequency (RF) remote control receiver, — an infrared remote control signal transmitter, — a SCART signal generator — a TV state sensor for use in the manufacture of home entertainment systems (1)
ex 8522 90 49 70 Assembly, comprising at least a flexible printed circuit, a laser driver integrated 0 % 31.12.2013 circuit and a signal converter integrated circuit
ex 8522 90 80 30 Holder, fixing item or internal stiffener of metal, for use in the manufacture of 0 % 31.12.2016 televisions, monitors and video players(1)
ex 8529 90 92 30
ex 8522 90 80 65 Assembly for optical discs, comprising at least an optical unit and DC motors, 0 % 31.12.2013 whether or not capable of double layer recording
ex 8522 90 80 70 Video tape recording/reproducing assembly comprising at least a motor and a printed 0 % 31.12.2013 circuit board containing integrated circuits with driver or control functions, whether
or not incorporating a transformer, for use in the manufacture of products falling within heading No 8521(1)
ex 8522 90 80 75 Optical reading head for CD player, consisting of one laser diode, one photodetector 0 % 31.12.2013 integrated circuit and one beam splitter
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8522 90 80 80 Laser optical drive unit assembly (so called mecha units) for the recording and/or 0 % 31.12.2013 reproduction of digital video and/or audio signals, comprising at least a laser optical
reading and/or writing unit, one or more DC motors and not containing a printed
circuit board or containing a printed circuit board not capable of signal processing for
sounds and images, for use in the manufacture of products falling within headings
No 8519, 8521, 8526, 8527, 8528 or 8543(1)
ex 8522 90 80 81 Laser optical pick up unit for the reproduction of optical signals from CD or DVD 0 % 31.12.2016
and the recording of optical signal on DVD, comprising at least
— a laser diode,
— a laser driver integrated circuit,
— a photo detector integrated circuit,
— a front monitor integrated circuit and an actuator,
for use in the manufacture of products falling within heading No 8521(1)
ex 8522 90 80 83 Blu-ray optical pick-up unit, whether or not recordable, for use with Blu-ray, DVD 0 % 31.12.2013
and CD discs, comprising at least:
— laser diodes operating at three different wavelengths,
— a photo detector integrated circuit and
— an actuator,
for the manufacture of products falling within heading 8521 (1)
ex 8522 90 80 84 Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and 0 % 31.12.2013
CD discs, comprising at least:
— an optical pick up unit with laser diodes operating at three different
wavelengths,
— a spindle motor,
— a stepping motor
ex 8522 90 80 85 Video head drum, with video heads or with video and audio heads and an electric 0 % 31.12.2013 motor, for use in the manufacture of products falling within heading No 8521(1)
ex 8522 90 80 95 Drive-unit capable of magnetooptical signal recording and optical signal 0 % 31.12.2013 reproduction, comprising at least an optical unit, DC motors and a printed circuit on
which are mounted integrated circuits providing drive and signal processing functions for reading optical discs having an external diameter of not more than 70 mm, not comprising circuits with amplification functions or power supply drive functions ex 8522 90 80 96 Hard disk drive, for incorporation in products of heading 8521(1) 0 % 31.12.2012
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8522 90 80 97 Tuner transforming high-frequency signals into mid-frequency signals, for use in the 0 % 31.12.2016 manufacture of products falling under n° 8521 and n° 8528(1)
ex 8529 90 65 50
ex 8525 80 19 20 Assembly for television cameras of dimensions of not more than 10 × 15 × 18 mm, 0 % 31.12.2013 comprising an image sensor, an objective and a color processor, having an image
resolution of not more than 1024 × 1280 pixel, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 8517 12 00(1)
ex 8525 80 19 25 Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), 0 % 31.12.2014 with:
— a sensitivity in the wavelength area of 8 µm or more, but not more than 14 µm, — a resolution of 324 × 256 pixels, — a weight of not more than 400 g, — measurements of not more than 70 mm × 67 mm × 75 mm, — a waterproof housing and an automotive- qualified plug and — a deviation of the output signal over the entire work temperature range of not more than 20 %
ex 8525 80 19 31 Closed circuit television (CCTV) camera: 0 % 31.12.2013 ex 8525 80 91 10 — of a weight of not more than 5,9 kg,
— whether or not contained in a housing, — of dimensions of not more than 405 mm × 315 mm, — with a single Charge-Couple-Device (CCD) or Complementary Metal– Oxide–Semiconductor (CMOS) sensor, — with effective pixels of not more than 5 megapixels, for use in CCTV surveillance systems (1)
ex 8525 80 19 35 Image scanning cameras, using: 0 % 31.12.2014 — a „Dynamic overlay lines“ system
— an output NTSC video signal
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— a voltage of 6,5 V — an illuminance of 0,5 lux or more
ex 8525 80 19 40 Assembly for cameras used in computer notebooks of dimensions of not more than 0 % 31.12.2016 15 x 25 x 25 mm, comprising an image sensor, an objective and a colour processor,
having an image resolution of not more than 1600 x 1200 pixel, whether or not fitted
with cable and/or housing, whether or not mounted on a base and containing a LED
chip(1)
ex 8526 91 20 80 Integrated audio module (IAM) with a digital video output for connection to an LCD 0 % 31.12.2015
touch screen monitor, interfaced over the Media Oriented Systems
ex 8528 59 80 10 Transport (MOST) network and transported over the MOST High protocol, with:
— a Printed circuit board (PCB) containing a Global Positioning System (GPS) receiver, a gyroscope, and a Traffic Message Channel (TMC) tuner, — a hard disk drive supporting multiple maps, — a HD radio, — a voice recognition system, — a connection to an external CD and DVD drive, — Bluetooth, MP3 and USB input connectivity, — a voltage of 10 V or more but not more than 16 V, for the use in the manufacture of vehicles in Chapter 87 (1)
ex 8527 91 99 10 Assembly consisting of at least: 0 % 31.12.2014 ex 8529 90 65 35 — an audio frequency amplifier unit, comprising at least an audio frequency
amplifier and a sound generator, — a transformer and — a radio broadcast receiver
ex 8528 49 10 10 Video monitor comprising: 0 % 31.12.2013 — a flat screen monochrome cathode-ray tube with a diagonal measurement
of the screen of not more than 110 mm and equipped with a deflector yoke, and
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer, the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus(1)
ex 8528 59 40 20 Liquid crystal display colour video monitor having a DC input voltage of 7 V or 0 % 31.12.2013 more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm
or less, suitable for the incorporation into goods of chapters 84 to 90 and 94 ex 8529 10 80 20 Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a 0 % 31.12.2013
frequency of 10,7 MHz (±30 kHz), contained in a housing ex 8529 10 80 35 Ceramic filter for a centre frequency of 450 kHz or more but not more than 470 kHz, 0 % 31.12.2013
with a bandwidth of not more than 13 kHz at 3 dB, contained in a housing ex 8529 10 80 50 Ceramic filter for a centre frequency of 450 kHz (±1,5 kHz) or 455 kHz (±1,5 kHz), 0 % 31.12.2013
with a bandwidth of not more than 30 kHz at 6 dB and not more than 70 kHz at 40 dB, contained in a housing
ex 8529 10 80 60 Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or 0 % 31.12.2013 more but not more than 1 990 MHz with an insertion loss of not more than 3,5 dB,
contained in a housing ex 8529 90 65 30 Parts of TV-apparatus, having micro-processor and video-processor functions, 0 % 31.12.2013
comprising at least a micro-controller and a video-processor, mounted on a leadframe
ex 8548 90 90 44 and contained in a plastic housing
ex 8529 90 65 45 Satellite radio receiver module transforming satellite high frequency signals to digital 0 % 31.12.2014 audio coded signal, for use in the manufacture of products falling within heading
8527(1) ex 8529 90 65 55 Ambient light LED board to be incorporated in goods of heading 8528 (1) 0 % 31.12.2015 ex 8529 90 65 60 Tuner transforming high frequency signals to mid frequency signals for use in the 0 % 31.12.2016
manufacture of satellite or terrestrial TV receivers for set-top boxes(1) ex 8529 90 65 65 Printed circuit board for distributing supply voltage and control signals directly to a 0 % 31.12.2015
control circuit on a TFT glass panel of a LCD module ex 8529 90 65 70 Unit driver consisting of an electronic integrated circuit and a flexible printed circuit, 0 % 31.12.2016
for use in the manufacture of LCD modules(1) ex 8529 90 65 75 Modules comprising at least semiconductor chips for: 0 % 31.12.2012
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— the generation of driving signals for pixel addressing, or — driving addressing pixels
ex 8529 90 65 80 Scan driver boards for generating electric pulses for scanning to certain electrodes in 0 % 31.12.2012 a glass panel, comprising at least semiconductor chips
ex 8529 90 92 25 LCD modules, not combined with touch screen facilities, solely consisting of: 0 % 31.12.2015 — one or more TFT glass or plastic cells,
— a die cast heat sink, — a backlight unit, — one printed circuit board with micro controller, and — LVDS (Low Voltage Differential Signalling) interface, for use in the manufacture of radios for motor vehicles (1)
ex 8529 90 92 32 Optical unit for video projection, comprising a colour separation system, a 0 % 31.12.2013 positioning mechanism and lenses, for use in the manufacture of products falling
within heading No 8528(1) ex 8529 90 92 40 Assembly comprising prisms, digital micromirror device (DMD) chips and electronic 0 % 31.12.2013
control circuits, for the manufacture of television projection equipments or video projectors(1)
ex 8529 90 92 41 Digital micromirror device (DMD)-chips, for use in the manufacture of video 0 % 31.12.2013 projectors(1)
ex 8529 90 92 42 Heat sinks and cooling fins of aluminium, for maintaining the operating temperature 0 % 31.12.2013 of transistors and integrated circuits in television sets(1)
ex 8529 90 92 43 Plasma display module incorporating only address and display electrodes, with or 0 % 31.12.2013 without driver and/or control electronics for pixel address only and with or without a
power supply ex 8529 90 92 44 LCD modules, solely consisting of one or more TFT glass or plastic cells, not 0 % 31.12.2013
combined with touch screen facilities, with or without backlight unit, with or without
inverters and one or more printed circuit boards with control electronics for pixel
addressing only
ex 8529 90 92 45 Integrated circuit package with TV reception functionality containing a channel 0 % 31.12.2013
decoder die, tuner die, power management die, GSM filters and discrete as well as
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats
ex 8529 90 92 47 Area image sensors ("progressive scan" Interline CCD-Sensor) for digital video 0 % 31.12.2014 cameras in the form of analogue, monolithic integrated circuit with pixels of less than
10 µm x 10 µm and with viewing panel, either polychromic or monochromic, and with a lenslet (micro lens) array with one lenslet mounted on each individual pixel
ex 8529 90 92 48 Aluminium die cast heat sink, for maintaining the operating temperature of transistors 0 % 31.12.2014 and integrated circuits, for use in the manufacture of products falling within heading
8527(1) ex 8529 90 92 49 AC Socket with a noise filter, composed of: 0 % 31.12.2014 ex 8536 69 90 83 — AC socket (for power cord connection) of 230 V,
— integrated noise filter composed of capacitors and inductors, — cable connector for connecting an AC Socket with the PDP Power Supply Unit, whether or not equipped with a metal support, which joins the AC Socket to the PDP TV set
ex 8529 90 92 50 Colour LCD display panel for LCD monitors of heading 8528: 0 % 31.12.2015 — with a diagonal measurement of the screen of 14,48 cm or more but not
more than 31,24 cm, — with background lighting, micro-controller, — with a CAN (Controller area network)-controller with LVDS (Lowvoltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface, — in a housing with an aluminium heat sink at the back of the housing, — without a signal-processing module, for use in the manufacture of vehicles of heading 8703(1)
ex 8529 90 97 60 Frame for use in the manufacture of high frequency tuners(1) 0 % 31.12.2013 ex 8531 80 95 40 Electro-accoustic transducer 0 % 31.12.2013 ex 8535 90 00 20 Printed circuit board in the form of plates consisting of isolating material with 0 % 31.12.2013
electrical connections and solder points, for use in the manufacture of back light units for LCD modules(1)
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8535 90 00 30 Semiconductor module switch in a casing: 0 % 31.12.2015 ex 8536 50 80 83 — consisting of an IGBT transistor chip and a diode chip on one or more
lead frames, — for a voltage of 600 V or 1200 V
ex 8536 30 30 11 Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap 0 % 31.12.2013 action switch, for direct mounting on an electric motor coil, contained in a
hermetically sealed housing ex 8536 49 00 91 Thermal relays contained in a hermetically sealed glass cartridge of not more than 35 0 % 31.12.2013
mm in length excluding wires, with a maximum leakage rate of 10 -6 cm 3 He/sec at
one bar in the temperature range 0 to 160 °C, to be incorporated into compressors for refrigerating equipment(1)
ex 8536 50 11 31 Switch of the printed circuit mount type, operating at a force of 4,9 N (±0,9 N), 0 % 31.12.2013 contained in a housing
ex 8536 50 11 32 Mechanical tact switch for connecting electronic circuits, operating at a voltage of 0 % 31.12.2013 not more than 60 V and at a current strength of not more than 50 mA, for use in the
manufacture of television sets(1) ex 8536 50 19 91 Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, 0 % 31.12.2013
contained in a housing with 3 connections ex 8536 50 19 93 Devices, having adjustable controller and switching functions, comprising one ore 0 % 31.12.2013
more monolithic integrated circuits whether or not combined with semiconductor
ex 8536 50 80 97 elements, mounted together on a leadframe and contained in a plastic housing
ex 8536 50 80 81 Mechanical speed governer switches for connecting electrical circuits, with: 0 % 31.12.2014 — a voltage of 240 V or more but not more than 250 V,
— an amperage of 4 A or more but not more than 6 A, for use in the manufacture of machines falling within heading 8467 (1)
ex 8536 50 80 82 Mechanical switches for connecting electrical circuits, with: 0 % 31.12.2014 — a voltage of 240 V or more but not more than 300 V,
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— an amperage of 3 A or more but not more than 15 A, for use in the manufacture of machines falling within heading 8467 (1)
ex 8536 50 80 93 Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a 0 % 31.12.2013 switching time of not more than 50 ms and an actuating current of not more than 500
mA at a voltage of 12 V ex 8536 50 80 95 Reed switch having a switching power of 20 W or more within the range of 17 - 43 0 % 31.12.2013
A.turn, in the form of a glass capsule, not containing mercury, the dimensions of which do not exceed 3 × 21 mm, for use in the manufacture of automotive airbag shock-sensors(1)
ex 8536 50 80 98 Mechanical push-button switch for connecting electronic circuits, operating at a 0 % 31.12.2013 voltage of 220 V or more but not more than 250 V and at a current strength of not
more than 5 A, for use in the manufacture of television sets(1) ex 8536 69 90 81 Pitch connector for use in the manufacture of LCD television reception apparatus(1) 0 % 31.12.2012 ex 8536 69 90 82 Modular jack connector for local area networks, integrating at least: 0 % 31.12.2014
— a pulse transformer, including a wide-band ferrite core, — a common mode coil, — a resistor, — a capacitor, for use in the manufacture of products falling within heading 8521 and 8528(1)
ex 8536 69 90 84 Universal serial bus (USB) female connector in a single or multiple form for 0 % 31.12.2015 connecting with other USB devices, for use in the manufacture of goods falling
within headings 8521 and 8528 (1)
ex 8536 69 90 85 Jacks, built into a plastic or metal housing, with no more than 8 pins, for use in the 0 % 31.12.2016 manufacture of products falling within heading 8521 and 8528(1)
ex 8536 69 90 86 High-Definition Multimedia Interface (HDMI) type connectors, built into a plastic or 0 % 31.12.2016 metal housing, with 19 or 20 pins in 2 rows, for use in the manufacture of products
falling within heading 8521 and 8528 (1)
ex 8536 69 90 87 D-subminiature (D-sub) type connectors, built into a plastic or metal housing, with 0 % 31.12.2016
EN 138 EN
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
and 8528(1) ex 8536 70 00 10 Optical female connector, for use in the manufacture of goods falling within headings 0 % 31.12.2016
8521 and 8528(1) ex 8536 70 00 20 Metal plugs, sockets and connectors in plastic or metal housing for optically and 0 % 31.12.2016
mechanically aligning optical fibre cables: — having an operating temperature of −20° C or more, but not more than 70° C, — having a signal transmission speed of not more than 25 Mbps, — having a supply voltage of −0,5 V or more, but not more than 7 V, — having an input voltage of −0,5 V or more, but not more than 7,5 V, — without an integrated circuit, for use in the manufacture of products of headings 8521 and 8528 (1)
ex 8536 90 85 92 Metallic stamped frame with connections 0 % 31.12.2013 ex 8536 90 85 94 Elastomeric connector, of rubber or silicone, consisting of one or more conductor 0 % 31.12.2013
elements ex 8544 49 93 10
ex 8536 90 85 96 Keypads, wholly of either silicone or polycarbonate, including printed keys with 0 % 31.12.2015 electrical contacting elements
ex 8538 90 99 94 ex 8543 90 00 50
ex 8536 90 85 97 Secure Digital (SD) type memory card slot, push-push or push-pull type, for use in 0 % 31.12.2016 the manufacture of goods falling within headings 8521 and 8528 (1)
ex 8537 10 99 92 Touch sensitive screen panel, consisting of a conductive grid between two glass or 0 % 31.12.2013 plastic plates or sheets, fitted with electric conductors and connectors
ex 8537 10 99 93 Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle 0 % 31.12.2013 mounted temperature control systems(1)
ex 8537 10 99 94 Unit consisting of two junction field effect transistors contained in a dual lead frame 0 % 31.12.2013 housing
ex 8543 70 90 20
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8537 10 99 95 Unit consisting of two metal oxide semiconductor field effect transistors contained in 0 % 31.12.2013 a dual lead frame housing
ex 8543 70 90 25
ex 8537 10 99 97 Electronic controller card for actuating and controlling of a single-phase electric AC 0 % 31.12.2015 commutator motor, with an output of 750 W or more and an input power of more
than 1600 W but not more than 2700 W ex 8538 90 99 92 Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a 0 % 31.12.2013
cylindrical casing, the exterior dimensions of which do not exceed 5 × 48 mm ex 8539 39 00 20 Cold cathode (CCFL) or External Electrode (EEFL) fluorescent lamps, of a diameter 0 % 31.12.2016
of not more than 5 mm and with a length of more than 120 mm but not more than 1570 mm
ex 8540 11 00 93 Colour cathode-ray tube equipped with electron guns placed side by side (in-line 0 % 31.12.2016 technology), with a diagonal measurement of the screen of 79 cm or more
ex 8540 11 00 94 Colour cathode-ray tube equipped with an electron gun and a deflection yoke, with a 0 % 31.12.2013 screen width/height ratio of 4/3 and a diagonal measurement of the screen of more
than 72 cm ex 8540 11 00 95 Colour cathode-ray tube with a screen width/height ratio of 16/9 and a diagonal 0 % 31.12.2013
measurement of the screen of 39,8 cm (± 0,3 cm) ex 8540 20 80 91 Photomultiplier consisting of a photocathode tube with 9 or 10 diodes, for light of a 0 % 31.12.2016
wavelength of 160 nm or more but not more than 930 nm, of a diameter of not more than 14 mm and a height of not more than 94 mm
ex 8540 71 00 20 Continuous wave magnetron with a fixed frequency of 2 460 MHz, packaged magnet, 0 % 31.12.2013 probe output, for use in the manufacture of products falling within subheading
8516 50 00(1) ex 8540 89 00 91 Displays in the form of a tube consisting of a glass housing mounted on a board the 0 % 31.12.2013
dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube
contains one or more rows of characters or lines arranged in rows, each character or
line consisting of fluorescent or phosphorescent elements. These elements are
mounted on a metallised base which is covered with fluorescent substances or
phosphorescent salts which give off light when bombarded with electrons
ex 8540 89 00 92 Vacuum fluorescent display tube 0 % 31.12.2013
ex 8540 91 00 32 Electron gun of colour cathode-ray tubes with an anode voltage of 27,5 kV or more 0 % 31.12.2013
but not more than 36 kV
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 8540 91 00 40 Deflection yoke of cathode-ray tubes 0 % 31.12.2013 ex 8540 91 00 50 Metal anode button to enable electrical contact with the anode inside the colour 0 % 31.12.2013
picture tube ex 8540 91 00 95 Slit or slot mask ("shadow mask"), excluding masks with continuously vertical slits, 0 % 31.12.2012
with a diagonal measurement of 697.5 mm or more, but not more than 782.9 mm ex 8540 91 00 96 Assembly for cathode-ray tubes with 2 or more but not more than 6 coils, a plastic 0 % 31.12.2013
support and a metal fixing ring, for the adjustment of display sharpness and/or convergence
ex 8543 70 90 30 Amplifier, consisting of active and passive elements mounted on a printed circuit, 0 % 31.12.2013 contained in a housing
ex 8543 70 90 35 Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or 0 % 31.12.2013 more but not more than 870 MHz, capable of switching VHF and UHF signals,
consisting of active and passive elements mounted on a printed circuit, contained in a housing
ex 8543 70 90 40 High-frequency amplifier comprising one or more integrated circuits and discrete 0 % 31.12.2015 capacitor chips on a metal flange in a housing
ex 8543 70 90 45 Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 0 % 31.12.2013 1,8 MHz to 67 MHz, contained in a housing
ex 8543 70 90 55 Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), 0 % 31.12.2013 whether or not equipped with an integrated driving circuit, and one photodiode with
amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or
more light-emitting diodes and at least 2 photodiodes with an amplifier circuit,
whether or not with an integrated logic gate arrays circuit or other integrated circuits,
contained in a housing
ex 8543 70 90 60 Oscillator, with a centre frequency of 20 GHz or more but not more than 42 GHz, 0 % 31.12.2013
consisting of active and passive elements not mounted on a substrate, contained in a
housing
ex 8543 70 90 65 Audio recording and reproducing circuit, capable of stereo audio data storage and 0 % 31.12.2013
simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits
mounted on a printed circuit or a lead frame, contained in a housing
ex 8543 70 90 80 Temperature compensated oscillator, comprising a printed circuit on which are 0 % 31.12.2013
mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a
housing
ex 8543 70 90 85 Voltage controlled oscillator (VCO), other than temperature compensated oscillators, 0 % 31.12.2013
consisting of active and passive elements mounted on a printed circuit, contained in a
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
housing ex 8543 70 90 90 Fuel cell module containing at least polymer electrolyte membrane fuel cells in a 0 % 31.12.2013
housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems(1)
ex 8543 70 90 95 Mobile telephone view and control module comprising of: 0 % 31.12.2015 — a mains power/ CAN (Controller area network) output socket,
— a Universal Serial Bus (USB) and Audio IN/OUT ports and — incorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST), for use in the manufacture of vehicles of chapter 87 (1)
ex 8543 90 00 20 Stainless steel cathode in the form of a plate with a hanger bar, whether or not with 0 % 31.12.2013 plastic side strips
ex 8543 90 00 30 Assembly of products falling within heading No 8541 or 8542 mounted on a printed 0 % 31.12.2013 circuit, contained in a housing
ex 8543 90 00 40 Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh 0 % 31.12.2012 of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of
titanium, fixed via ribs of titanium, of which both pans are fixed together back to back
ex 8544 42 90 10 Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, 0 % 31.12.2013 with:
— a voltage of 1,25 V (± 0,25 V) — connectors fitted at one or both ends, at least one of which contains pins with a pitch of 0,5 mm, — outer screening shielding, used solely for communication between LCD or PDP panel and video processing electronic circuits
ex 8544 49 93 20 PET/PVC insulated flexible cable with: 0 % 31.12.2013 — a voltage of not more than 60 V,
— a current of not more than 1 A — a heat resistance of not more than 105 °C, — individual wires of a thickness of 0,05 mm (± 0,01 mm) and a width of
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
not more than 0,65 mm (± 0,03 mm) — distance between conductors of not more than 0,5 mm and — pitch (distance from centreline to centreline of conductors) of not more than 1,08 mm
ex 8545 19 00 20 Carbon electrodes, for use in the manufacture of zinc-carbon batteries(1) 0 % 31.12.2013 ex 8545 90 90 20 Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes 0 % 31.12.2015 ex 8547 10 00 10 Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, 0 % 31.12.2013
metallised, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not more than 250 mm, for the manufacture of vacuum interrupters(1)
ex 8548 10 29 10 Spent lithium-ion or nickel metal hydride electric accumulators 0 % 31.12.2016 ex 8548 90 90 41 Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or 0 % 31.12.2013
more but not more than 40 MHz and a capacitor, contained in a housing ex 8548 90 90 43 Contact image sensor 0 % 31.12.2013 ex 8548 90 90 47 Unit consisting of two or more light emitting diode chips operating at a typical 0 % 31.12.2013
wavelength of 440 nm or more but not more than 660 nm, contained in a lead frame housing whose exterior dimensions - without fittings – do not exceed 12 x 12 mm
ex 8548 90 90 48 Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical 0 % 31.12.2013 wavelength of 635 nm or more but not more than 815 nm
ex 8548 90 90 49 LCD modules, solely consisting of one or more TFT glass or plastic cells, combined 0 % 31.12.2013 with touch screen facilities, with or without backlight unit, with or without inverters
and one or more printed circuit boards with control electronics for pixel addressing only
ex 8704 23 91 20 Motor chassis with a self-ignition capacity of at least 8 000 cm³, fitted with a cabin 0 % 31.12.2012 on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing
working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm (1)
ex 8708 30 91 10 Drum type parking brake: 0 % 31.12.2015 — operating within the service brake disk,
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
— with a diameter of 170 mm or more but not more than 175 mm, for use in the manufacture of motor vehicles (1)
ex 8708 99 97 20 Metal housing caps for incorporation into balancing-arms or spherical bearings used 0 % 31.12.2016 in the suspension systems for the front wheels of motor vehicles(1)
ex 9001 10 90 10 Image reverser made up from an assembly of optical fibres 0 % 31.12.2013 ex 9001 20 00 10 Material consisting of a polarising film, whether or not on rolls, supported on one or 0 % 31.12.2012
both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film
ex 9001 20 00 20 Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not 0 % 31.12.2013 possessing polarising properties, specifically cut
ex 9001 90 00 55
ex 9001 90 00 21 Multi-Optical-Path (MOP) film, in rolls, based on polyethylene terephthalate (PET) 0 % 31.12.2014 material:
— having a total thickness of 100 µm or more, but not more than 240 µm, — having a total transmittance of more than 55 % but not more than 65 %, determined by standard method JIS K7105 related to ASTM D1003 and — haze more than 70 % but not more than 80 %, determined by standard method JIS K7105 related to ASTM D1003
ex 9001 90 00 35 Rear projection screen, comprising a lenticular plastic plate 0 % 31.12.2013 ex 9001 90 00 45 Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at 0 % 31.12.2013
both ends ex 9001 90 00 60 Reflector or diffuser sheets in rolls 0 % 31.12.2013 ex 9001 90 00 65 Optical film with a minimum of 5 multi-layer structures, including a back side 0 % 31.12.2014
reflector, a front side coating and a contrast filter with a pitch of not more than 0,65 µm, for use in the manufacture of front projection screens(1)
ex 9001 90 00 70 Polyethylene terephthalate film with a thickness of less than 300 µm according to 0 % 31.12.2016 ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90°
and a prism pitch of 50 µm
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 9001 90 00 75 Front filter comprising glass panels with special printing and film coating, for use in 0 % 31.12.2012 the manufacture of plasma display modules(1)
ex 9001 90 00 76 Plasma display panel (PDP) filter 0 % 31.12.2013 ex 9001 90 00 85 Light guide panel made of poly(methyl methacrylate), 0 % 31.12.2015
— whether or not cut, — whether or not printed, for use in the manufacture of backlight units for flat screen TVs (1)
ex 9002 11 00 10 Adjustable lens unit, having a focal length of 90 mm or more but not more than 0 % 31.12.2013 180 mm and comprising a combination of between 4 and 8 glass or methacrylic
lenses with a diameter of 120 mm or more but not more than 180 mm, each lens
coated on at least one side with a magnesium fluoride layer, for use in the
manufacture of video projectors(1)
ex 9002 11 00 50 Lens unit, having a focal length of 25 mm or more but not more than 150 mm, 0 % 31.12.2013
consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more
than 190 mm
ex 9002 20 00 10 Filter, consisting of a plastic polarising membrane, a glass plate and a transparent 0 % 31.12.2013
protective film, mounted on a metal frame, for use in the manufacture of products
falling within heading 8528(1)
ex 9002 90 00 20 Lens, mounted, having a fixed focal length of 3,8 mm (±0,19 mm) or 8 mm 0 % 31.12.2013
(±0,4 mm), with a relative aperture of F2.0 and a diameter of not more than 33 mm,
for use in the manufacture of charged-coupled (CCD) cameras(1)
ex 9002 90 00 30 Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and 0 % 31.12.2013
with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between
2 plastic plates
ex 9012 90 90 10 Energy filters, to be installed on the column of electron microscopes 0 % 31.12.2016
ex 9013 20 00 10 Carbon dioxide laser, stimulated by high frequency, having an output power of 12 W 0 % 31.12.2013
or more, but not more than 200 W
ex 9013 20 00 20 Laser head assemblies for use in the manufacture of measuring or checking machines 0 % 31.12.2013
for semiconductor wafers or devices(1)
ex 9013 20 00 30 Laser for use in the manufacture of measuring or checking machines for 0 % 31.12.2013
semiconductor wafers or devices(1)
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 9022 30 00 10 X-ray tube with a target voltage of 4 kV or more but not more than 30 kV, a power of 0 % 31.12.2013 not more than 9 W and a target current of not more than 2 mA
ex 9022 90 00 10 Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a 0 % 31.12.2013 glass plate with a matrix of thin-film transistors, covered with a film of amorphous
silicon, coated with a scintillator layer of caesium iodide and a metallised protective
layer, with an active surface of 409.6 mm² x 409.6 mm² and a pixel size of
200 µm² x 200 µm²
ex 9027 10 90 10 Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of 0 % 31.12.2013
a zirconium-ceramic element in a metal housing
ex 9031 80 34 30 Apparatus for measuring the angle and direction of rotation of motor vehicles, 0 % 31.12.2013
consisting of at least one yaw rate sensor in the form of a monocrystalline quartz,
whether or not combined with one or more measuring sensors, the whole contained in
a housing
ex 9031 80 38 10 Acceleration measurement device for automotive applications, comprising one or 0 % 31.12.2013
more active and/or passive elements and one or more sensors, the whole contained in
a housing
ex 9031 90 85 20 Assembly for a laser align sensor, in the form of a printed circuit comprising optical 0 % 31.12.2013
filters and a charge-coupled image (CCD) sensor, the whole contained in a housing
ex 9032 10 89 20 Thermostat, damper or bimetal with, 0 % 31.12.2012
— an opening temperature of +7 °C (± 1.5°C ), closing temperature of -
4°C(± 1.5°C )for damper thermostat,
— an opening temperature of +8°C (± 3°C ) for bimetal thermostat;
for use in the manufacture of frost free refrigerators(1)
ex 9032 89 00 20 Automotive airbag shock-sensor, comprising a contact capable of switching a current 0 % 31.12.2013
of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm
ex 9032 89 00 30 Electronic controller of electric power steering (EPS controller) 0 % 31.12.2013
ex 9032 89 00 40 Digital valve controller for controlling liquids and gases 0 % 31.12.2012
ex 9405 40 35 10 Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of 0 % 31.12.2013
a diameter of 3,0 mm (±0,2 mm), of a length of 420 mm (±1 mm) or more, but not
more than 600 mm (±1 mm), for the manufacture of goods of heading 8528(1)
ex 9405 40 39 10 Ambient light module with a length of 300 mm or more, but not more than 600 mm, 0 % 31.12.2013
based on a light engine of a series of 3 or more, but not more than 9 specific one chip
red green and blue light emitting diodes mounted on a PCB, with light coupled to the
front and/or back of the Flat TV set(1)
Rate of Date
CN code TARIC Description autonomous foreseen for
duty mandatory review
ex 9405 40 39 20 LED array of white silicone, containing: 0 % 31.12.2013
— an LED matrix module measuring 38.6 mm x 20.6 mm (± 0.1 mm), equipped with 128 red and green LED chips, and — a flexible printed circuit board, equipped with a Negative Temperature Coefficient Thermistor
ex 9405 40 39 30 Electric light assembly containing: 0 % 31.12.2015
— printed circuit boards and — Light Emitting Diodes (LED) for the manufacture of backlight units for flat TV sets (1)
ex 9503 00 75 10 Plastic cable car scale models, whether or not with a motor, for printing (1) 0 % 31.12.2015 ex 9503 00 95 10 ex 9608 91 00 10 Non-fibrous plastic pen-tips with an internal canal 0 % 31.12.2013 ex 9608 91 00 20 Felt tips and other porous-tips for markers, without internal canal 0 % 31.12.2013 ex 9612 10 10 10 Ribbons of plastic with segments of different colours, providing the penetration of 0 % 31.12.2013
dyes by heat into a support (so called dye-sublimation)
(1) Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No. 2454/93 (OJ L 253 11.10.1993, p. 1).
(2) However, no suspension shall apply where processing is carried out by retail or catering undertakings.
(3) The specific additional duty is applicable.
(4) A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Article 308d of the Commission Regulation (EEC) No 2454/93.
LEGISLATIVE FINANCIAL STATEMENT FOR PROPOSALS HAVING A
BUDGETARY IMPACT EXCLUSIVELY LIMITED TO THE REVENUE SIDE
1. NAME OF THE PROPOSAL:
Proposal for a Council Regulation suspending the autonomous Common Customs
Tariff duties on certain agricultural, fishery and industrial products.
2. BUDGET LINES:
Chapter and Article: Chapter 12, Article 120 Amount budgeted for the year 2012: 19 171 200 000 € (DB 2012)
3. FINANCIAL IMPACT:
Proposal has no financial implications
X Proposal has no financial impact on expenditure but has a financial impact on
revenue; the effect is as follows:
Budget line Revenue 3 [Year: 2012 – 2016]
Article 120 Impact on own resources - 774 000 000 (per year)
4. ANTI-FRAUD MEASURES
Checks on the end-use of some of the products covered by this Council Regulation will be carried out in accordance with Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 laying down provisions for the implementation of the Community
Customs Code.
5. OTHER REMARKS
This Regulation replaces existing Council Regulation (EC) No 1255/1996 i. The Annex of the existing Regulation has 1472 product lines and results in estimated amount of uncollected customs duties of a total amount of 997 Mio € for the year 2011. This figure is obtained on the basis of Eurostat Comext data concerning the total value of imports of products falling under autonomous tariff suspensions in 2010, multiplied by the respective ad valorem duty rate of the common Customs Tariff for the specific tariff lines. The total amount above already excludes the
3 Regarding traditional own resources (agricultural duties, sugar levies, customs duties) the amounts
indicated must be net amounts, i.e. gross amounts after deduction of 25 % of collection costs
uncollected duties for products which will no longer be suspended after the entry into force of this Regulation and the abrogation of Regulation (EC) No 1255/1996 i. In addition to the aforementiond suspended products lines, this proposal contains 128 new product lines to be suspended. This addendum to the existing Annex of Regulation (EC) No 1255/1996 i would entail the non-collection of additional customs duties estimated to the amount of 35 Mio €. Thus the uncollected duties corresponding to the suspensions listed in the Annex of this proposal, calculated on the basis of expected imports into the requesting Member State for 2012 until 2016, are in total 1 032 Mio €/year. Estimated cost of this operation The impact on the loss of revenue resulting from this Regulation may be estimated at MEUR (gross amount, expenses incurred in collection included) 1 032 x 75% = 774 MEUR/year for the period 01.01.2012 - 31.12.2016.
The EU Monitor enables its users to keep track of the European process of lawmaking, focusing on the relevant dossiers. It automatically signals developments in your chosen topics of interest. Apologies to unregistered users, we can no longer add new users.This service will discontinue in the near future.