Regulation 2010/66 - EU Ecolabel
Please note
This page contains a limited version of this dossier in the EU Monitor.
Contents
official title
Regulation (EC) No 66/2010 of the European Parliament and of the Council of 25 November 2009 on the EU Ecolabel| Legal instrument | Regulation |
|---|---|
| Number legal act | Regulation 2010/66 |
| Original proposal | COM(2008)401  |
| CELEX number63 | 32010R0066 |
| Document | 25-11-2009; Date of signature |
|---|---|
| Publication in Official Journal | 30-01-2010; OJ L 27, 30.1.2010,Special edition in Croatian: Chapter 15 Volume 016 |
| Effect | 19-02-2010; Entry into force Date pub. + 20 See Art 20 |
| End of validity | 31-12-9999 |
30.1.2010 |
EN |
Official Journal of the European Union |
L 27/1 |
REGULATION (EC) No 66/2010 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 25 November 2009
on the EU Ecolabel
(Text with EEA relevance)
THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty establishing the European Community, and in particular Article 175(1) thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Economic and Social Committee (1),
Having regard to the opinion of the Committee of the Regions (2),
Acting in accordance with the procedure laid down in Article 251 of the Treaty (3),
Whereas:
(1) |
The aim of Regulation (EC) No 1980/2000 of the European Parliament and of the Council of 17 July 2000 on a revised Community eco-label award scheme (4) was to establish a voluntary ecolabel award scheme intended to promote products with a reduced environmental impact during their entire life cycle and to provide consumers with accurate, non-deceptive, science-based information on the environmental impact of products. |
(2) |
The experience gained during the implementation of Regulation (EC) No 1980/2000 has shown the need to amend that ecolabel scheme in order to increase its effectiveness and streamline its operation. |
(3) |
The amended scheme (hereinafter ‘the EU Ecolabel scheme’) should be implemented in compliance with the provisions of the Treaties, including, in particular, the precautionary principle as laid down in Article 174(2) of the EC Treaty. |
(4) |
It is necessary to ensure coordination between the EU Ecolabel scheme and the establishment of the requirements in the context of Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy related products (5). |
(5) |
The EU Ecolabel scheme is part of the sustainable consumption and production policy of the Community, which aims at reducing the negative impact of consumption and production on the environment, health, climate and natural resources. The scheme is intended to promote those products which have a high level of environmental performance through the use of the EU Ecolabel. To this effect, it is appropriate to require that the criteria with which products must comply in order to bear the EU Ecolabel be based on the best environmental performance achieved by products on the Community market. Those criteria should be simple to understand and to use and should be based on scientific evidence, taking into consideration the latest technological developments. Those criteria should be market oriented and limited to the most significant environmental impacts of products during their whole life cycle. |
(6) |
In order to avoid the proliferation of environmental labelling schemes and to encourage higher environmental performance in all sectors for which environmental impact is a factor in consumer choice, the possibility of using the EU Ecolabel should be extended. However, for food and feed product groups, a study should be undertaken to ensure that criteria are feasible and that added value can be guaranteed. For food and feed products, as well as unprocessed agricultural products that lie within the scope of Council Regulation (EC) No 834/2007 of 28 June 2007 on organic production and labelling of organic products (6), the option that only those products certified as organic would be eligible for award of the EU Ecolabel should be considered, to avoid confusion for consumers. |
(7) |
The EU Ecolabel should aim at substituting hazardous substances by safer substances, wherever technically possible. |
(8) |
For the acceptance by the general public of the EU Ecolabel scheme, it is essential that environmental non-governmental... |
More
This text has been adopted from EUR-Lex.
This dossier is compiled each night drawing from aforementioned sources through automated processes. We have invested a great deal in optimising the programming underlying these processes. However, we cannot guarantee the sources we draw our information from nor the resulting dossier are without fault.
This page is also available in a full version containing the summary of legislation, de geconsolideerde versie, the legal context, de Europese rechtsgrond, other dossiers related to the dossier at hand and finally the related cases of the European Court of Justice.
The full version is available for registered users of the EU Monitor by ANP and PDC Informatie Architectuur.
The EU Monitor enables its users to keep track of the European process of lawmaking, focusing on the relevant dossiers. It automatically signals developments in your chosen topics of interest. Apologies to unregistered users, we can no longer add new users.This service will discontinue in the near future.
- 1.Regulation (EC) No 1980/2000 of the European Parliament and of the Council of 17 July 2000 on a revised Community Ecolabel award scheme
- 2.Life cycle thinking (LCT) is the process of taking into account, as far as possible, all resources consumed and all environmental and health implications that are associated with the life cycle of a product (good or service), considering eg the extraction of resources, production, use, transport, recycling, and waste treatment and disposal. This process helps to avoid the 'shifting of burdens', i.e. of impacts or resource consumption, among life cycle stages, geographic areas, and environmental and human health problem fields, such as Climate Change, Summer Smog, Acid Rain, or Resource Depletion etc. Life Cycle Assessment (LCA) is the standardised quantitative method for compilation and evaluation of the inputs, outputs and the potential environmental impacts of a product system throughout its life cycle (ISO 14040 ff).
- 3.(IPP) (COM (2003) 302 final)
- 4.(Decision No 1600/2002/EC)
- 8.Regulation (EC) No 1980/2000 of the European Parliament and of the Council of 17 July 2000 on a revised Community Ecolabel award scheme
- 9.OJ C , , p. .
- 10.OJ C , , p. .
- 11.OJ C , , p. .
- 12.OJ C , , p. .
- 13.OJ L 237, 21.9.2000, p. 1.
- 14.OJ L 189, 20.7.2007, p. 1
- 15.OJ L 184, 17.7.1999, p. 23.
- 16.OJ L 31, 1.2.2002, p. 1
- 17.Life cycle thinking (LCT) is the process of taking into account, as far as possible, all resources consumed and all environmental and health implications that are associated with the life cycle of a product (good or service), considering eg the extraction of resources, production, use, transport, recycling, and waste treatment and disposal. This process helps to avoid the 'shifting of burdens', i.e. of impacts or resource consumption, among life cycle stages, geographic areas, and environmental and human health problem fields, such as Climate Change, Summer Smog, Acid Rain, or Resource Depletion etc. Life Cycle Assessment (LCA) is the standardised quantitative method for compilation and evaluation of the inputs, outputs and the potential environmental impacts of a product system throughout its life cycle (ISO 14040 ff).
- 18.(IPP) (COM (2003) 302 final)
- 19.(IPP) (COM (2003) 302 final)
- 20.Life cycle thinking (LCT) is the process of taking into account, as far as possible, all resources consumed and all environmental and health implications that are associated with the life cycle of a product (good or service), considering eg the extraction of resources, production, use, transport, recycling, and waste treatment and disposal. This process helps to avoid the 'shifting of burdens', i.e. of impacts or resource consumption, among life cycle stages, geographic areas, and environmental and human health problem fields, such as Climate Change, Summer Smog, Acid Rain, or Resource Depletion etc. Life Cycle Assessment (LCA) is the standardised quantitative method for compilation and evaluation of the inputs, outputs and the potential environmental impacts of a product system throughout its life cycle (ISO 14040 ff).
- 21.Regulation (EC) No 1980/2000 of the European Parliament and of the Council of 17 July 2000 on a revised Community Ecolabel award scheme
- 22.(Decision No 1600/2002/EC)
- 23.(IPP) (COM (2003) 302 final)
- 24.Non-differentiated appropriations hereafter referred to as NDA
- 25.Expenditure that does not fall under Chapter xx 01 of the Title xx concerned.
- 26.Expenditure within article xx 01 04 of Title xx.
- 27.Expenditure within chapter xx 01 other than articles xx 01 04 or xx 01 05.
- 28.See points 19 and 24 of the Interinstitutional agreement.
- 29.Additional columns should be added if necessary i.e. if the duration of the action exceeds 6 years
- 30.Reference should be made to the specific legislative financial statement for the Executive Agency(ies) concerned.
- 31.C12000 - Committee for the adaptation to technical progress and application of the Community award scheme for an eco-label (ECO-LABEL).
- 32.Regulation (EC) No 1980/2000 of the European Parliament and of the Council of 17 July 2000 on a revised Community Ecolabel award scheme
- 33.Life cycle thinking (LCT) is the process of taking into account, as far as possible, all resources consumed and all environmental and health implications that are associated with the life cycle of a product (good or service), considering eg the extraction of resources, production, use, transport, recycling, and waste treatment and disposal. This process helps to avoid the 'shifting of burdens', i.e. of impacts or resource consumption, among life cycle stages, geographic areas, and environmental and human health problem fields, such as Climate Change, Summer Smog, Acid Rain, or Resource Depletion etc. Life Cycle Assessment (LCA) is the standardised quantitative method for compilation and evaluation of the inputs, outputs and the potential environmental impacts of a product system throughout its life cycle (ISO 14040 ff).
- 34.(IPP) (COM (2003) 302 final)
- 35.(Decision No 1600/2002/EC)
- 39.Regulation (EC) No 1980/2000 of the European Parliament and of the Council of 17 July 2000 on a revised Community Ecolabel award scheme
- 40.OJ C , , p. .
- 41.OJ C , , p. .
- 42.OJ C , , p. .
- 43.OJ C , , p. .
- 44.OJ L 237, 21.9.2000, p. 1.
- 45.OJ L 189, 20.7.2007, p. 1
- 46.OJ L 184, 17.7.1999, p. 23.
- 47.OJ L 31, 1.2.2002, p. 1
- 48.Life cycle thinking (LCT) is the process of taking into account, as far as possible, all resources consumed and all environmental and health implications that are associated with the life cycle of a product (good or service), considering eg the extraction of resources, production, use, transport, recycling, and waste treatment and disposal. This process helps to avoid the 'shifting of burdens', i.e. of impacts or resource consumption, among life cycle stages, geographic areas, and environmental and human health problem fields, such as Climate Change, Summer Smog, Acid Rain, or Resource Depletion etc. Life Cycle Assessment (LCA) is the standardised quantitative method for compilation and evaluation of the inputs, outputs and the potential environmental impacts of a product system throughout its life cycle (ISO 14040 ff).
- 49.(IPP) (COM (2003) 302 final)
- 50.(IPP) (COM (2003) 302 final)
- 51.Life cycle thinking (LCT) is the process of taking into account, as far as possible, all resources consumed and all environmental and health implications that are associated with the life cycle of a product (good or service), considering eg the extraction of resources, production, use, transport, recycling, and waste treatment and disposal. This process helps to avoid the 'shifting of burdens', i.e. of impacts or resource consumption, among life cycle stages, geographic areas, and environmental and human health problem fields, such as Climate Change, Summer Smog, Acid Rain, or Resource Depletion etc. Life Cycle Assessment (LCA) is the standardised quantitative method for compilation and evaluation of the inputs, outputs and the potential environmental impacts of a product system throughout its life cycle (ISO 14040 ff).
- 52.Regulation (EC) No 1980/2000 of the European Parliament and of the Council of 17 July 2000 on a revised Community Ecolabel award scheme
- 53.(Decision No 1600/2002/EC)
- 54.(IPP) (COM (2003) 302 final)
- 55.Non-differentiated appropriations hereafter referred to as NDA
- 56.Expenditure that does not fall under Chapter xx 01 of the Title xx concerned.
- 57.Expenditure within article xx 01 04 of Title xx.
- 58.Expenditure within chapter xx 01 other than articles xx 01 04 or xx 01 05.
- 59.See points 19 and 24 of the Interinstitutional agreement.
- 60.Additional columns should be added if necessary i.e. if the duration of the action exceeds 6 years
- 61.Reference should be made to the specific legislative financial statement for the Executive Agency(ies) concerned.
- 62.C12000 - Committee for the adaptation to technical progress and application of the Community award scheme for an eco-label (ECO-LABEL).
- 63.Deze databank van de Europese Unie biedt de mogelijkheid de actuele werkzaamheden (workflow) van de Europese instellingen (Europees Parlement, Raad, ESC, Comité van de Regio's, Europese Centrale Bank, Hof van Justitie enz.) te volgen. EURlex volgt alle voorstellen (zoals wetgevende en begrotingsdossiers) en mededelingen van de Commissie, vanaf het moment dat ze aan de Raad of het Europees Parlement worden voorgelegd.
- 64.EUR-lex provides an overview of the proposal, amendments, citations and legality.