Annexes to COM(2023)255 - Amending Regulation 2021/2278 suspending the Common Customs Tariff duties on certain agricultural and industrial products

Please note

This page contains a limited version of this dossier in the EU Monitor.

dossier COM(2023)255 - Amending Regulation 2021/2278 suspending the Common Customs Tariff duties on certain agricultural and industrial products.
document COM(2023)255 EN
date June 16, 2023
ANNEX

The Annex to Regulation (EU) 2021/2278 is amended as follows:

(1)the entries with the following serial numbers are deleted: 0.2425, 0.3140, 0.3966, 0.4030, 0.4140, 0.4305, 0.4609, 0.4733, 0.4893, 0.5018, 0.5187, 0.5788, 0.6629, 0.6654, 0.6689, 0.6781, 0.7489, 0.7972, 0.8111, 0.8112, 0.8140 and 0.8311;

(2)the following entries replace those entries that have the same serial numbers:

Serial NumberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate envisaged for mandatory review
‘0.32272846 90 30

2846 90 40

2846 90 50

2846 90 60

2846 90 70

2846 90 90
Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 000  %-31.12.2023
0.7389ex 2914 29 00551-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) with a purity by weight of more than 90 %0  %-31.12.2024
0.7722ex 2919 90 0055Reaction products of phosphoryl trichloride and 2-methyloxirane (CAS RN 1244733-77-4)0  %-31.12.2024
0.4058ex 3204 20 0010Colourant C.I. Fluorescent Brightener 184 (CAS RN 7128-64-5) and preparations based thereon with a colourant C.I. Fluorescent Brightener 184 content of 20 % or more by weight0  %-31.12.2026
0.4922ex 3601 00 0020Pyrotechnical mixture in cylindrical shape or granulate form, composed of strontium nitrate or copper nitrate or basic copper nitrate in a matrix of nitroguanidine or guanidine nitrate, also containing a binder and additives, used as a component of airbag inflators (1)0  %-31.12.2026
0.4410ex 3903 90 9086Mixture containing by weight:

—45 % or more but not more than 65 % of polymers of styrene,

—30 % or more but not more than 45 % of poly(phenylene ether), and

—not more than 11 % of additives
0  %-31.12.2023
0.6351ex 3907 29 2050Poly(p-phenylene oxide) in the form of powder with:

—a glass-transition temperature of 210 °C or more,

—a weight average molecular weight (Mw) of 35 000 or more but not more than 80 000 ,

—an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram
0  %-31.12.2024
0.5506ex 3920 51 0030Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 125 μm0  %-31.12.2023
0.8438ex 3920 62 1928Non-transparent film of poly(ethylene terephthalate) or poly(vinyl difluoride):

—each outer layer with a thickness of 7 μm or more but not more than 80 μm,

—with a tensile strength of 300 N/cm2 or more (ASTM D-882),

—with a total thickness of 200 μm or more but not more than 350 μm, and

—with a width of 600 mm or more but not more than 1 600 mm,

—covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites
0  %-31.12.2027
0.7056ex 7019 61 00

ex 7019 63 00
70

30
E-fibre glass fabrics:

—having a weight of 20 g/m2 or more, but not more than 214 g/m2,

—surface treated with an organosilane coupling agent,

—in rolls,

—having a humidity content by weight of 0,13 % or less, and

—having not more than 3 hollow fibres out of 100 000 fibres,

for the exclusive use in the manufacture of prepregs and copper clad laminates (1)
0  %m231.12.2026
0.8300ex 8408 90 65

ex 8408 90 67

ex 8408 90 81
20

20

20
Compression-ignition internal combustion piston engines:

—of the inline type,

—with a cylinder capacity of 7 000 cm3 or more but not more than 18 100 cm3,

—with a power of 205 kW or more but not more than 597 kW,

—with an exhaust after-treatment module,

—with external width/height/depth dimensions of not more than 1 310 /1 300 /1 040 mm or 2 005 /1 505 /1 300 mm or 2 005 /1 505 /1 800 mm,

for use in the manufacture of crushing, screening, separation or compost turning machines (1)
0  %-31.12.2026
0.6627ex 8501 10 9975Permanently excited DC motor with

—a multiple-phase winding,

—an external diameter of 24 mm or more but not more than 38 mm,

—a rated speed of not more than 12 000 rpm,

—a power supply voltage of 8 V or more but not more than 27 V,

—with or without a pulley,

—with or without a gear wheel
0  %-31.12.2025
0.2838ex 8501 10 9979DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least – 20 °C to + 70 °C0  %-31.12.2023
0.7789ex 8505 19 1020Arc segments of permanent magnets of agglomerated ferrite, with:

—a length of 16,8 mm or more, but not more than 110,2 mm,

—a width of 14,8 mm or more, but not more than 75,2 mm,

—a thickness of 4,8 mm or more, but not more than 13,2 mm,

for use in the manufacture of electromotor rotors (1)
0  %-31.12.2024
0.6703ex 8507 60 0033Lithium-ion accumulator, with:

—a length of 150 mm or more, but not more than 1 310 mm,

—a width of 100 mm or more, but not more than 1 000 mm,

—a height of 200 mm or more, but not more than 1 500 mm,

—a weight of 75 kg or more, but not more than 200 kg,

—a nominal capacity not less than 58 Ah and not more than 500 Ah,

—a nominal output voltage of 230V AC (line to neutral) or a nominal voltage of 50V (± 10 %)
1,3  %-31.12.2023
0.7796ex 8536 49 0060Relay in the shape of a cube with:

—a coil operating voltage of 12 VDC (Voltage Direct Current) or more, but not more than 24 VDC (Voltage Direct Current),

—a contact current carrying capacity of 5A or more, but not more than 15A,

—a contact voltage of 80 VAC (Voltage Alternating Current) or more, but not more than 270 VAC (Voltage Alternating Current),

—outer dimensions of 19 mm (± 0,4 mm) x 15,2 mm (± 0,4 mm) x 15,5 mm (± 0,4 mm),

for use in the production of control board of household appliances (1)
0  %-31.12.2024
0.4616ex 8536 69 9083AC socket with a noise filter, composed of:

—AC socket (for power cord connection) of 230 V,

—integrated noise filter composed of capacitors and inductors,

—cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,

whether or not equipped with a metal support, which joins the AC socket to the PDP TV set
0  %p/st31.12.2024
0.6507ex 8537 10 9850Electronic control unit BCM (Body Control Module) or IBM (Integrated Body Control Module) or similar:

—comprising at least a plastic box with printed circuit board, with operating direct voltage of 9 V or more, but not more than 16 V,

—whether or not with metal holder,

—able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,

of a kind used in the manufacture of goods of Chapter 87
0  %p/st31.12.2024
0.7409ex 8540 91 0020Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), with electric connectors

—with or without a metal housing,

—with or without a graphite carbon shield mounted in a mini-Vogel type system,

—with or without separate pyrolytic carbon blocks used as heating elements, and

—a cathode temperature of less than 1 800 K at a filament current of 1,26 A
0  %-31.12.2027
0.2434ex 8548 00 9044Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing0  %p/st31.12.2023
0.8279ex 8708 40 2080Transmission gearbox without torque converter, with:

—dual clutch,

—7 or more forward gears,

—1 reverse gear,

—a maximum torque of 390 Nm,

—whether or not with electric motor integrated,

—a height of 400 mm or more but not more than 600 mm,

—a width 350 mm or more but not more than 600 mm, and

—a weight of 70 kg or more but not more than 110 kg,

for use in the manufacture of motor vehicles of Heading 8703  (1)
0  %p/st31.12.2026
0.7710ex 8714 99 50

ex 8714 99 50
11

91
Derailleur gears, consisting of:

—rear derailleur and mounting articles,

—with or without front derailleur,

for use in the manufacture of bicycles (including electric bicycles) (1)
0  %p/st31.12.2024
0.7708ex 8714 99 9040Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles) (1)0  %p/st31.12.2024
0.7973ex 9002 11 0023Lens with:

—motorized focus, zoom, aperture,

—electronically switchable infrared cut filter,

—an adjustable focal length not less than 2,7 mm and not more than 55mm,

—a weight of not more than 120 g,

—a length of less than 70 mm,

—a diameter of not more than 70 mm
0  %-31.12.2025

(3)the following entries are inserted according to the numerical order of the CN and TARIC codes in the second and third columns:

Serial NumberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate envisaged for mandatory review
‘0.8448ex 2835 10 0040Calcium phosphinate (CAS RN 7789-79-9) with a purity by weight of 98 % or more0  %-31.12.2027
0.8520ex 2840 20 9020Barium borate (CAS RN 13701-59-2) with a purity by weight of 99 % or more0  %-31.12.2027
0.8492ex 2903 99 80181-Fluoronaphthalene (CAS RN 321-38-0) with a purity by weight of 99 % or more0  %-31.12.2027
0.8482ex 2907 29 00134,4'-Methylenedi-2,6-xylenol (CAS RN 5384-21-4) with a purity by weight of 98,5 % or more0  %-31.12.2027
0.8495ex 2915 90 3020Chloromethyl dodecanoate (CAS RN 61413-67-0) with a purity by weight of 97 % or more0  %-31.12.2027
0.8457ex 2915 90 70533-Chloro-2,2-dimethylpropanoyl chloride (CAS RN 4300-97-4) with a purity by weight of 98 % or more0  %-31.12.2027
0.8489ex 2916 39 9040Ethyl 4-bromo-3-(bromomethyl)benzoate (CAS RN 347852-72-6) with a purity by weight of 97 % or more0  %-31.12.2027
0.8509ex 2918 19 9825(S)-2-Hydroxy-2-phenylacetic acid (CAS RN 17199-29-0) with a purity by weight of 99 % or more0  %-31.12.2027
0.8511ex 2920 90 1085Diethyl carbonate (CAS RN 105-58-8) with a purity by weight of 99,9 % or more3,2  %-31.12.2023
0.8490ex 2920 90 70704,4,5,5-Tetramethyl-1,3,2-dioxaborolane (CAS RN 25015-63-8) with a purity by weight of 97 % or more, containing not more than 1 % of the stabiliser triethylamine (CAS RN 121-44-8)0  %-31.12.2027
0.8477ex 2921 19 9935N-Ethyl-N-isopropylpropan-2-amine 2-(difluoromethoxy)acetate with a purity by weight of 98 % or more0  %-31.12.2027
0.8473ex 2922 50 0045(S)-2-Amino-2-(3-fluoro-5-methoxyphenyl)ethanol hydrochloride (CAS RN 2095692-22-9) with a purity by weight of 98 % or more0  %-31.12.2027
0.8462ex 2926 90 7031Lambda-cyhalothrin (ISO) (CAS RN 91465-08-6) with a purity by weight of 97 % or more0  %-31.12.2027
0.8474ex 2928 00 9053Ethyl chloro[(4-methoxyphenyl)hydrazono]acetate (CAS RN 27143-07-3) with a purity by weight of 98 % or more0  %-31.12.2027
0.8451ex 2929 10 0065Ethyl isocyanate (CAS RN 109-90-0) with a purity by weight of 98 % or more0  %-31.12.2027
0.8510ex 2930 90 9836Anhydrous potassium О-isopentyl-dithiocarbonate (CAS RN 928-70-1) with a purity by weight of 90 % or more0  %-31.12.2027
0.8447ex 2930 90 9839Thiodiacetic acid (CAS RN 123-93-3) with a purity by weight of 98 % or more0  %-31.12.2027
0.8481ex 2930 90 98412,2'-Diallyl-4,4'-sulphonyldiphenol (CAS RN 41481-66-7) with a purity by weight of 96 % or more0  %-31.12.2027
0.8478ex 2932 20 9028(R)-3-(3,4-difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl)furan-2(5H)-one (CAS RN 2875066-35-4) with a purity by weight of 98 % or more0  %-31.12.2027
0.8452ex 2933 29 9038Cyazofamid (ISO) (CAS RN 120116-88-3) with a purity by weight of 94 % or more0  %-31.12.2027
0.8485ex 2933 39 9908Fluazinam (ISO) (CAS RN 79622-59-6) with a purity by weight of 97 % or more0  %-31.12.2027
0.8456ex 2933 59 95325-Chloro-3-nitropyrazolo[1,5-a]pyrimidine (CAS RN 1363380-51-1) with a purity by weight of 98 % or more0  %-31.12.2027
0.8484ex 2933 59 95441,4,5,6-Tetrahydro-1,2-dimethylpyrimidine (CAS RN 4271-96-9) with a purity by weight of 98 % or more0  %-31.12.2027
0.8488ex 2933 59 9546Trilaciclib (CAS RN 1374743-00-6) with a purity by weight of 99 % or more0  %-31.12.2027
0.8455ex 2933 99 80434-([1,2,4]Triazolo[1,5-a]pyridin-7-yloxy)-3-methylaniline (CAS RN 937263-71-3) with a purity by weight of 98 % or more0  %-31.12.2027
0.8487ex 2934 99 9007Cedazuridine (INN) (CAS RN 1141397-80-9) with a purity by weight of 99 % or more0  %-31.12.2027
0.8472ex 2934 99 9008(R)-tert-butyl 2-(6-(5-chloro-2-((tetrahydro-2H-pyran-4-yl)amino)pyrimidin-4-yl)-1-oxoisoindolin-2-yl)propanoate (CAS RN 2095665-45-3) with a purity by weight of 98 % or more0  %-31.12.2027
0.8449ex 2934 99 90093-[2-{(2R,3S)-3-[(1R)-1-{[tert-butyl(dimethyl)silyl]oxy}ethyl]-4-oxoazetidin-2-yl}propanoyl]-4,4-dimethyl-1,3-oxazolidin-2-one (isomeric mixture of CAS RNs 114341-89-8 and 114418-63-2) with a purity by weight of 99 % or more0  %-31.12.2027
0.8479ex 2935 90 90162-Bromo-N-(4,5-dimethyl-1,2-oxazol-3-yl)-N-(methoxymethyl) benzene-1-sulfonamide (CAS RN 415697-57-3) with a purity by weight of 97 % or more0  %-31.12.2027
0.8467ex 2935 90 90265-(2-Fluorophenyl)-1-(pyridin-3-ylsulfonyl)-1H-pyrrole-3-carbaldehyde (CAS RN 881677-11-8) with a purity by weight of 97 % or more0  %-31.12.2027
0.8471ex 3824 99 9273Tri-C8-10-alkyl amines (CAS RN 68814-95-9) with a purity by weight of 95 % or more0  %-31.12.2027
0.8463ex 3824 99 9274Reaction mass containing by weight:

—22,4 % or more, but not more than 26,4 % of 3-methylphenyl diphenyl phosphate (CAS RN 69500-28-3);

—17,3 % or more, but not more than 21,3 % of 4-methylphenyl diphenyl phosphate (CAS RN 78-31-9);

—5 % or more, but not more than 9 % of bis(3-methylphenyl) phenyl phosphate (CAS RN 34909-68-7);

—8,9 % or more, but not more than 12,9 % of 3-methylphenyl 4-methylphenyl phenyl phosphate (CAS RN 222165-66-4);

—26,9 % or more, but not more than 30,9 % of triphenyl phosphate (CAS RN 115-86-6)
0  %-31.12.2027
0.8486ex 3824 99 9275Mixture, containing by weight:

—not more than 75 % of tetrabutyltin (CAS RN 1461-25-2),

—not more than 20 % of tributyltin chloride (CAS RN 1461-22-9),

—not more than 4 % of dibutyltin dichloride (CAS RN 683-18-1),

for use in the production of butyltin compounds used in glass manufacture and tributyltin chloride used as a catalyst in the pharmaceutical industry (2)
3,2  %-31.12.2027
0.8506ex 3824 99 9279Mixture, containing by weight:

—tributyltin chloride (CAS RN 1461-22-9) with a purity by weight of 80 % or more,

—not more than 5 % tetrabutyltin (CAS RN 1461-25-2),

—not more than 6 % dibutyltin dichloride (CAS RN 683-18-1),

—not more than 11 % o-xylene (CAS RN 95-47-6),

for use in the production of tributyltin chloride used as a catalyst in the pharmaceutical industry (2)
3,2  %-31.12.2027
0.8517ex 3824 99 92831-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) with a purity by weight of 70 % or more, but not more than 90 %0  %-31.12.2024
0.8499ex 3824 99 9286Tall oil N,N-dimethyl fatty amides (CAS RN 68308-74-7) with a purity by weight of 99 % or more0  %-31.12.2027
0.8498ex 3824 99 9333Preparation containing by weight

—60 % or more but not more than 70 % of calcium rel-(1R,2S)-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1),

—30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1),

—1 % or more but not more than 5 % of CI Pigment Blue 29 (CAS RN 57455-37-5) and

—1 % or more but not more than 5 % of CI Pigment Violet 15 (CAS RN 12769-96-9)
0  %-31.12.2027
0.8497ex 3824 99 9336Preparation containing by weight 60 % or more but not more than 70 % of calcium rel-(1R,2S)-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1) and 30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1)0  %-31.12.2027
0.8514ex 3824 99 96432-(Ethylthio)ethanethiol functionalized silicagel with a purity by weight of 98 % or more0  %-31.12.2027
0.8491ex 3907 29 9970Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) (CAS RN 29658-26-2) containing by weight not more than 35 % of additives0  %-31.12.2027
0.8504ex 4009 31 00

ex 4009 32 00
10

20
Multilayered rubber pipe, reinforced with aramide fabric, whether or not having polyamide connection elements and steel clamps, for use in the manufacture of automotive heat exchangers and/or condenser in automotive air conditioning systems (2)0  %-31.12.2027
0.8480ex 7326 90 9860Vane ring of a kind for fastening gas flow control blades:

—of iron or steel alloy,

—with a heat resistance of 830 °C or more but not more than 1 050  °C,

—with an external diameter of not more than 92 mm,

—with holes for holding the gas flow control blades,

for use in the manufacture of turbochargers (2)
0  %-31.12.2027
0.8512ex 7326 90 9870Disc of a kind for ensuring the gas flow channel width:

—of iron or steel alloy,

—with a heat resistance of 830 °C or more but not more than 1 050  °C,

—with an external diameter of not more than 92,5 mm,

—with an internal diameter of not more than 62 mm,

for use in the manufacture of turbochargers (2)
0  %-31.12.2027
0.8464ex 7609 00 0040Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers:

—with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm,

—with a weight of 0,02 kg or more, but not more than 0,25 kg,

for use in the manufacture of cooling system in vehicles of Chapter 87 (2)
0  %p/st31.12.2027
0.8503ex 7609 00 0050Machined aluminium components:

—containing by weight 0,55 %, or more but not more than 0,61 % of magnesium,

—containing by weight 0,55 %, or more but not more than 0,61 % of silicon,

—with a hardening state of T5 or T6,

—with a mass of 0,05 kg or more, but not more than 0,2 kg,

for use in the manufacture of CO2 cooling systems in motor vehicles (2)
0  %p/st31.12.2027
0.8493ex 7609 00 0060Aluminium connection block:

—with a weight of 3 g or more but not more than 400 g,

—manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade,

—being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly,

—with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line),

—with sockets designed for brazing or fastening,

—with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm,

for the manufacture of automotive cooling and air conditioning systems (2)
0  %p/st31.12.2027
0.8466ex 8409 91 0033Camshaft carrier for a spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, with:

—a weight of 4,0 kg or more but not more than 5,5 kg,

—a wall thickness of 2,0 mm or more but not more than 6,0 mm,

for use in the manufacture of motor vehicle engines (2)
0  %p/st31.12.2027
0.8469ex 8409 91 0038Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, for use in the manufacture of motor vehicle engines (2)0  %-31.12.2027
0.8483ex 8414 90 0015Fan assembly made of aluminium and magnesium alloy:

—with an outer diameter of 54 mm or more but not more than 130 mm,

—with a height of 8 mm or more but not more than 30 mm,

—with two discs connected by blades of involute shape,

—with or without dowel, and with or without washer,

for use in the manufacture of electromotors (2)
0  %-31.12.2027
0.8494ex 8414 90 0025Scroll type compressor housing of an aluminium alloy of a kind with:

—a heat resistance of 200 °C or more but not more than 250 °C,

—one or more fixing points suitable for mounting an actuator,

for use in the manufacture of turbochargers (2)
0  %-31.12.2027
0.8465ex 8415 90 0015Electrically welded manifolds for the condenser in automotive air conditioning systems:

—consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding,

—containing internal baffles responsible for the proper flow of coolant,

—with a length of 190 mm or more, but not more than 460 mm,

—with a diameter of 9 mm or more, but not more than 42 mm,

—with a weight of 0,01 kg or more, but not more than 0,45 kg,

—whether or not having aluminium connection blocks,

used in the production of air conditioning systems in vehicles of Chapter 87 (2)
0  %p/st31.12.2027
0.8458ex 8501 53 5050Asynchronous traction motor, with:

—a continuous power of 140 kW or more but not more than 180 kW,

—a liquid cooled system,

—a total length of 580 mm or more but not more than 730 mm,

—a total width of 550 mm or more but not more than 670 mm,

—a total height of 510 mm or more but not more than 630 mm,

—with a weight of not more than 390 kg,

—with or without reduction gear,

—with or without starter generator,

—2 mounting points,

for use in the manufacture of the electric drive of hybrid buses (2)
0  %-31.12.2027
0.8508ex 8505 11 1078Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions:

—a length of 200 mm or more but not more than 205 mm,

—a width of 58 mm or more but not more than 62 mm,

—a height of 25 mm or more but not more than 30 mm,

with a stud mounted in the middle
0  %-31.12.2027
0.8453ex 8512 30 9040Device for simulating engine sound at reduced speed of a hybrid or electric vehicle:

—containing at least printed circuit board and loudspeaker,

—in a plastic housing with a holder,

for use in the manufacture of goods of Chapter 87 (2)
0  %-31.12.2027
0.8460ex 8537 10 9143Electronic suspension control unit with:

—a printed circuit board in plastic housing,

—LIN and CAN buses,

—a programmable memory,

—a signal processor,

—an operating direct current voltage of 9 V or more but not more than 16 V,

—at least one connector,

—whether or not with metal mounting bracket,

for use in the manufacture of goods of Chapter 87 (2)
0  %-31.12.2027
0.8461ex 8708 50 2018Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of:

—two cardan rods,

—central universal joint,

—central bearing with suspension in a plastic cover,

—universal joints on both ends of the shaft,

—slip, tube and end yokes,

—of a length of 1,4 m or more but not more than 2,4 m,

for use in the production of goods of Chapter 87 (2)
0  %-31.12.2027
0.8507ex 8714 99 9050Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the manufacture of bicycles, including electrical bicycles (2)0  %-31.12.2027


(1) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’;

(2) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’.