Annexes to COM(2007)856 - Emission performance standards for new passenger cars as part of the EC's integrated approach to reduce CO2 emissions from light-duty vehicles - Main contents
Please note
This page contains a limited version of this dossier in the EU Monitor.
| dossier | COM(2007)856 - Emission performance standards for new passenger cars as part of the EC's integrated approach to reduce CO2 emissions from ... |
|---|---|
| document | COM(2007)856  |
| date | April 23, 2009 |
SPECIFIC EMISSIONS TARGETS
1. The specific emissions of CO2 for each new passenger car, measured in grams per kilometre, shall, for the purposes of the calculations in this Annex, be determined in accordance with the following formulae:
| (a) | From 2012 to 2015: Specific emissions of CO2 = 130 + a × (M – M0) Where:
|
| (b) | From 2016: Specific emission of CO2 = 130 + a × (M – M0) Where:
|
2. The specific emissions target for a manufacturer in a calendar year shall be calculated as the average of the specific emissions of CO2 of each new passenger car registered in that calendar year of which it is the manufacturer.
ANNEX II
MONITORING AND REPORTING EMISSIONS
PART A — Collection of data on new passenger cars and determination of CO2 monitoring information
1. For the calendar year commencing 1 January 2010 and each subsequent calendar year, Member States shall record the following details for each new passenger car registered in its territory:
| (a) | the manufacturer; |
| (b) | its type, variant and version; |
| (c) | its specific emissions of CO2 (g/km); |
| (d) | its mass (kg); |
| (e) | its wheel base (mm); and |
| (f) | its track width (mm). |
2. The details referred to in point 1 shall be taken from the certificate of conformity for the relevant passenger car. Where the certificate of conformity specifies both a minimum and a maximum mass for a passenger car, Member States shall use only the maximum figure for the purposes of this Regulation. In the case of bi-fuelled vehicles (petrol/gas) the certificates of conformity of which bear specific CO2 emission figures for both types of fuel, Member States shall use only the figure measured for gas.
3. For the calendar year commencing 1 January 2010 and each subsequent calendar year, each Member State shall determine, in accordance with the methods described in Part B, for each manufacturer:
| (a) | the total number of new passenger cars registered in its territory; |
| (b) | the average specific emissions of CO2, as specified in point 2 of Part B of this Annex; |
| (c) | the average mass, as specified in point 3 of Part B of this Annex; |
| (d) | for each version of each variant of each type of new passenger car:
|
PART B — Methodology for determining CO2 monitoring information for new passenger cars
Monitoring information which Member States are required to determine in accordance with point 3 of Part A shall be determined in accordance with the methodology in this Part.
1. Number of new passenger cars registered (N)
Member States shall determine the number of new passenger cars registered within their territory in the respective monitoring year (N).
2. Average specific emissions of CO2 of new passenger cars (Save)
The average specific emissions of CO2 of all new passenger cars newly registered in a Member State's territory in the monitoring year (Save) is calculated by dividing the sum of the specific emissions of CO2 of each individual new passenger car (S) by the number of new passenger cars (N).
Save = (1/N) × Σ S
3. Average mass of new passenger cars
The average mass of all new passenger cars registered in a Member State's territory in the monitoring year (Mave) is calculated by dividing the sum of the mass of each individual new passenger car (M) by the number of new passenger cars (N).
Mave = (1/N) × Σ M
4. The distribution by version of new passenger cars
For each version of each variant of each type of new passenger car, the number of newly registered passenger cars, the mass of the vehicles, the specific emissions of CO2 and the footprint of the car are to be recorded.
5. Footprint
The footprint of the car shall be calculated by multiplying the wheelbase of the car by the track width of the car.
PART C — Format for the transmission of data
For each year, Member States shall report the data described in point 3 of Part A for each manufacturer in the following formats:
Aggregated data:
| Year: | ||||
| Manufacturer | Total number of new passenger cars registered | Average specific emissions of CO2 (g/km) | Average mass (kg) | Average footprint (m2) |
| (Manufacturer 1) | … | … | … | … |
| (Manufacturer 2) | … | … | … | … |
| … | … | … | … | … |
| Total all manufacturers | … | … | … | … |
Detailed data at manufacturer level:
| Year | Manufacturer | Type of car | Variant | Version | Innovative technology (1) or group of innovative technologies, or alternative- fuel vehicle (2) | Make | Commercial name | Total new registrations | Specific emissions of CO2 (g/km) | Mass (kg) | Foot-print (m2) | Emissions reduction through innovative technologies (1) or alternative-fuel capability (2) |
| Year 1 | (Name of manufacturer 1) | (name of type 1) | (name of variant 1) | (name of version 1) | … | … | … | … | … | … | … | |
| Year 1 | (Name of manufacturer 1) | (name of type 1) | (name of variant 1) | (name of version 2) | … | … | … | … | … | … | … | |
| Year 1 | (Name of manufacturer 1) | (name of type 1) | (name of variant 2) | (name of version 1) | … | … | … | … | … | … | … | |
| Year 1 | (Name of manufacturer 1) | (name of type 1) | (name of variant 2) | (name of version 2) | … | … | … | … | … | … | … | |
| Year 1 | (Name of manufacturer 1) | (name of type 2) | (name of variant 1) | (name of version 1) | … | … | … | … | … | … | … | |
| Year 1 | (Name of manufacturer 1) | (name of type 2) | (name of variant 1) | (name of version 2) | … | … | … | … | … | … | … | |
| Year 1 | (Name of manufacturer 1) | (name of type 2) | (name of variant 2) | (name of version 1) | … | … | … | … | … | … | … | |
| Year 1 | (Name of manufacturer 1) | (name of type 2) | (name of variant 2) | (name of version 2) | … | … | … | … | … | … | … | |
| Year 1 | (Name of manufacturer 1) | … | … | … | … | … | … | … | … | … | … | |
| Year 1 | (Name of manufacturer 1) | … | … | … | … | … | … | … | … | |||
| Year 1 | (Name of manufacturer 1) | … | … | … | … | … | … | … | … | … | ||
| Year 1 | (Name of manufacturer 1) | … | … | … | … | … | … | … | … | |||
| Year 1 | (Name of manufacturer 1) | … | … | … | … | … | … | … | … | … | … |
(1) In accordance with Article 12.
(2) In accordance with Article 6.