Annexes to COM(2006)750 - Amendment of Regulation (EC) No 1255/96 temporarily suspending the autonomous common customs tariff duties on certain industrial, agricultural and fishery products

Please note

This page contains a limited version of this dossier in the EU Monitor.

dossier COM(2006)750 - Amendment of Regulation (EC) No 1255/96 temporarily suspending the autonomous common customs tariff duties on certain ...
document COM(2006)750 EN
date December 19, 2006
ANNEX

‘

ANNEX

CN codeTARICDescriptionRate of autonomous dutyValidity end date
ex 0302 69 9910Sturgeons, fresh, chilled or frozen, for processing (1)  (2)0 %1.1.2007 — 31.12.2008
ex 0303 79 9810
ex 0302 69 9920Lump fish (Cyclopterus lumpus) with roe, fresh or chilled, for processing (1)0 %1.1.2007 — 31.12.2008
ex 0302 69 9930Red snapper (Lutjanus purpureus), fresh, chilled or frozen, for processing (1)  (3)0 %1.1.2007 — 31.12.2008
ex 0303 79 9820
ex 0302 70 0011Hard fish roes, fresh, chilled or frozen0 %1.1.2007 — 31.12.2008
ex 0302 70 0031
ex 0302 70 0041
ex 0302 70 0082
ex 0302 70 0083
ex 0302 70 0084
ex 0302 70 0089
ex 0303 80 9010
ex 0303 80 9019
ex 0303 11 0012Pacific salmon (Oncorhynchus spp.), frozen and headless, for the processing industry for manufacture into pastes or spreads (1)0 %1.1.2007 — 31.12.2008
ex 0303 11 0018
ex 0303 19 0012
ex 0303 19 0018
ex 0304 19 3945Fillets and meat of dogfish (Squalus acanthias), fresh, chilled or frozen6 %1.1.2007 — 31.12.2008
ex 0304 19 9960
ex 0304 29 6110
ex 0304 99 9921
ex 0305 20 0011Hard fish roes, salted or in brine0 %1.1.2007 — 31.12.2008
ex 0305 20 0018
ex 0305 20 0019
ex 0305 20 0021
ex 0305 20 0030
ex 0306 19 9010Krill for processing (1)0 %1.1.2007 — 31.12.2008
ex 0306 29 9010
ex 0603 90 0010Flowers, flower buds, foliage, leaves and other parts of plants, not further prepared than dried, dyed or bleached, for use in the manufacture of pot pourri of subheading 3307 49 00 (1)0 %1.1.2007 — 31.12.2008
ex 0604 99 9010
ex 0710 21 0010Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness not exceeding 6 mm, to be used, in their pods, in the manufacture of prepared meals (1)  (3)0 %1.1.2007 — 31.12.2008
ex 0710 80 9550Bamboo shoots, frozen, not put up for retail sale0 %1.1.2007 — 31.12.2008
ex 0711 59 0011Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry (1)0 %1.1.2007 — 31.12.2011
ex 0712 32 0010Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale (1)  (3)0 %1.1.2007 — 31.12.2008
ex 0712 33 0010
ex 0712 39 0031
ex 0804 10 0010Dates, fresh or dried, not put up for retail sale0 %1.1.2007 — 31.12.2008
ex 0810 40 5010Fruit of the species Vaccinium macrocarpon, fresh0 %1.1.2007 — 31.12.2008
ex 0810 90 9510Rose-hips, fresh0 %1.1.2007 — 31.12.2008
0811 90 50Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %1.1.2007 — 31.12.2008
0811 90 7069
ex 0811 90 95
ex 0811 90 9520Boysenberries, frozen, not containing added sugar, not put up for retail sale0 %1.1.2007 — 31.12.2008
ex 0811 90 9530Pineapple (Ananas comosus), in pieces, frozen0 %1.1.2007 — 31.12.2008
ex 0811 90 9540Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %1.1.2007 — 31.12.2008
ex 1511 90 1910Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:

—industrial monocarboxylic fatty acids of subheading 3823 19 10,

—mixtures of methyl esters of fatty acids of subheading 3824 90 98,

—methyl esters of fatty acids of heading 2915 or 2916,

—stearic acid of subheading 3823 11 00 or

—goods of heading No 3401

 (1)
0 %1.1.2007 — 31.12.2008
ex 1511 90 9110
ex 1513 11 1010
ex 1513 19 3010
ex 1513 21 1010
ex 1513 29 3010
ex 1515 90 9992Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid0 %1.1.2007 — 31.12.2008
ex 1517 90 9910Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % arachidonic acid or 35 % or more but not more than 50 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO)0 %1.1.2007 — 31.12.2011
ex 1518 00 9110Soya-bean oil, modified with maleic acid, for the manufacture of cosmetic products (1)0 %1.1.2007 — 31.12.2008
ex 1604 11 0020Pacific salmon (Oncorhynchus spp.), for the processing industry for manufacture into pastes or spreads (1)0 %1.1.2007 — 31.12.2008
ex 1604 20 1020
ex 1604 30 9010Hard fish roes, washed, cleaned of adherent organs and simply salted or in brine, for processing (1)0 %1.1.2007 — 31.12.2008
ex 1605 10 0011Crabs of the species “King” (Paralithodes camchaticus), “Hanasaki” (Paralithodes brevipes), “Kegani” (Erimacrus isenbecki), “Queen” and “Snow” (Chionoecetes spp.), “Red” (Geryon quinquedens), “Rough stone” (Neolithodes asperrimus), Lithodes antarctica, “Mud” (Scylla serrata), “Blue” (Portunus spp.), simply boiled in water and shelled, whether or not frozen, in immediate packings of a net content of 2 kg or more0 %1.1.2007 — 31.12.2008
ex 1605 10 0019
ex 1605 10 0092Crabs of the species Paralomis granulosa0 %1.1.2007 — 31.12.2008
ex 1605 10 0094
ex 1902 30 1010Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale0 %1.1.2007 — 31.12.2008
ex 1903 00 0020
ex 2005 91 0010Bamboo shoots, prepared or preserved, in immediate packings of a net content exceeding 5 kg0 %1.1.2007 — 31.12.2008
ex 2106 10 2010Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate0 %1.1.2007 — 31.12.2008
ex 2309 90 9920Calcium sodium phosphate, with a fluorine content of 0,005 % or more but less than 0,2 % by weight on the dry anhydrous product, for use in the manufacture of additives for animal feeding (1)0 %1.1.2007 — 31.12.2008
ex 2707 99 1110Crude light oils containing by weight:

—10 % or more of vinyltoluenes,

—10 % or more of indene and

—1 % or more but not more than 5 % of naphthalene
0 %1.1.2007 — 31.12.2008
ex 2710 11 2510Mixture of isomers 2,4,4-trimethylpent-1-ene and 2,4,4-trimethylpent-2-ene0 %1.1.2007 — 31.12.2008
ex 2805 30 1010Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium0 %1.1.2007 — 31.12.2008
ex 2805 30 1020Alloy of lanthanum and other rare-earth metals, containing by weight 43 % or more of lanthanum0 %1.1.2007 — 31.12.2008
ex 2805 30 9010Lanthanum of a purity by weight of 99 % or more0 %1.1.2007 — 31.12.2008
ex 2811 19 8010Sulfamidic acid0 %1.1.2007 — 31.12.2008
ex 2811 22 0010Silicon dioxide in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)0 %1.1.2007 — 31.12.2008
ex 2811 29 9010Tellurium dioxide0 %1.1.2007 — 31.12.2008
ex 2812 90 0010Nitrogen trifluoride0 %1.1.2007 — 31.12.2008
ex 2812 90 0020Silicon tetrafluoride0 %1.1.2007 — 31.12.2008
ex 2818 30 0010Aluminium hydroxide oxide in the form of pseudo-boehmite4 %1.1.2007 — 31.12.2008
2819 10 00Chromium trioxide0 %1.1.2007 — 31.12.2011
ex 2819 90 9010Dichromium trioxide:

—of a specific surface of 37 m2/g or more (as determined by the BET method),

—of a purity by weight of 99,5 % or more calculated on the dry substance,

—of a specific gravity of 1,2 g/cm3 or less,

for the manufacture of magnetic chromium dioxide (1)
0 %1.1.2007 — 31.12.2008
ex 2820 90 9010Manganese (II, III) oxide containing by weight 70 % or more of manganese0 %1.1.2007 — 31.12.2008
ex 2821 10 0010Diiron trioxide, in the form of powder, of a purity by weight of 99,2 % or more, for the manufacture of goods of heading No 8504 (1)0 %1.1.2007 — 31.12.2008
ex 2823 00 0010Titanium dioxide, of a purity by weight of 99,9 % or more, with an average grain-size of 1,2 μm or more but not exceeding 1,8 μm, for the manufacture of goods of heading No 8 532 or 8533 (1)0 %1.1.2007 — 31.12.2008
ex 2825 50 0010Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride0 %1.1.2007 — 31.12.2008
ex 2826 90 8010Potassium hexafluorophosphate0 %1.1.2007 — 31.12.2008
ex 2827 39 8510Copper monochloride of a purity by weight of 96 % or more but not exceeding 99 %0 %1.1.2007 — 31.12.2008
ex 2827 60 0010Titanium tetraiodide0 %1.1.2007 — 31.12.2008
ex 2830 10 0010Disodium tetrasulfide, containing by weight 38 % or less of sodium calculated on the dry weight0 %1.1.2007 — 31.12.2008
ex 2830 90 8510Zinc sulfide containing:

—20,0 mg/kg or less of chloride,

—0,2 mg/kg or less of copper,

—0,5 mg/kg or less of iron and

—1,0 mg/kg or less of lead
0 %1.1.2007 — 31.12.2008
ex 2833 29 9010Manganese sulphate monohydrate0 %1.1.2007 — 31.12.2008
ex 2836 91 0020Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:

—2 mg/kg or more of arsenic,

—200 mg/kg or more of calcium,

—200 mg/kg or more of chlorides,

—20 mg/kg or more of iron,

—150 mg/kg or more of magnesium,

—20 mg/kg or more of heavy metals,

—300 mg/kg or more of potassium,

—300 mg/kg or more of sodium,

—200 mg/kg or more of sulfates,

determined according to the methods specified in the European Pharmacopœia
0 %1.1.2007 — 31.12.2008
ex 2836 99 1710Zirconium (IV) basic carbonate0 %1.1.2007 — 31.12.2008
ex 2837 19 0010Zinc cyanide0 %1.1.2007 — 31.12.2008
ex 2837 19 0020Copper cyanide0 %1.1.2007 — 31.12.2008
ex 2837 20 0010Tetrasodium hexacyanoferrate (II)0 %1.1.2007 — 31.12.2011
ex 2839 90 9010Lead silicate hydrate, of a lead content by weight of (84,5 ± 1,5) %, evaluated as lead monoxide, in the form of powder0 %1.1.2007 — 31.12.2008
ex 2839 90 9020Calcium silicate0 %1.1.2007 — 31.12.2008
ex 2842 90 8010Ammonium sulfamidate0 %1.1.2007 — 31.12.2008
ex 2843 29 0010Silver oxide, nitrate- and carbonate-free, with a silver content of at least 99,99 % by weight of the metal content, for the manufacture of silver oxide batteries (1)0 %1.1.2007 — 31.12.2011
ex 2843 90 9020Palladium monoxide0 %1.1.2007 — 31.12.2008
ex 2843 90 9030Mixture of palladium phthalocyanines0 %1.1.2007 — 31.12.2008
2845 10 00Heavy water (deuterium oxide) (Euratom)0 %1.1.2007 — 31.12.2008
2845 90 10Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)0 %1.1.2007 — 31.12.2008
ex 2846 10 0010Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight0 %1.1.2007 — 31.12.2008
ex 3824 90 9848
ex 2846 10 0020Dicerium tricarbonate, whether or not hydrated0 %1.1.2007 — 31.12.2008
ex 2846 10 0030Cerium lanthanum carbonate, whether or not hydrated0 %1.1.2007 — 31.12.2008
ex 2846 10 0040Cerium lanthanum neodymium praseodymium carbonate, whether or not hydrated0 %1.1.2007 — 31.12.2008
2846 90 00Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 000 %1.1.2007 — 31.12.2008
ex 2848 00 0010Phosphine0 %1.1.2007 — 31.12.2008
ex 2850 00 2010Silane0 %1.1.2007 — 31.12.2008
ex 2850 00 2020Arsine0 %1.1.2007 — 31.12.2008
ex 2903 39 9010Carbon tetrafluoride (tetrafluoromethane)0 %1.1.2007 — 31.12.2008
ex 2903 39 90201,1,1,2,3,3,3-Heptafluoropropane0 %1.1.2007 — 31.12.2008
ex 2903 39 9030Perfluoroethane0 %1.1.2007 — 31.12.2008
ex 2903 39 90401,1-Difluoroethane0 %1.1.2007 — 31.12.2008
ex 2903 39 90501,1,1,3,3-Pentafluoropropane0 %1.1.2007 — 31.12.2008
ex 2903 39 90701,1,1,2 Tetrafluoroethane, certified odourless containing a maximum :

—600 ppm by weight of 1,1,2,2-Tetrafluorethane,

—2 ppm by weight of pentafluoroethane,

—2 ppm by weight of chlorodifluoromethane,

—2 ppm by weight of chloropentafluoroethane,

—2 ppm by weight of dichlorodifluoromethane

For use in the manufacture of pharmaceutical grade propellant for medical metred dose inhalers (1)
0 %1.1.2007 — 31.12.2011
ex 2903 39 9080Hexafluoropropene0 %1.1.2007 — 31.12.2011
ex 2903 43 00101,1,1-Trichlorotrifluoroethane0 %1.1.2007 — 31.12.2008
ex 2903 49 1010Chloro-1,1,1-trifluoroethane0 %1.1.2007 — 31.12.2008
ex 2903 49 80201-Bromo-3-chloropropane0 %1.1.2007 — 31.12.2011
ex 2903 59 80101,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene0 %1.1.2007 — 31.12.2008
ex 2903 59 8020Hexachlorocyclopentadiene0 %1.1.2007 — 31.12.2008
ex 2903 59 8030Octafluorocyclopentene0 %1.1.2007 — 31.12.2011
ex 2903 69 9010Di- or tetrachlorotricyclo[8.2.2.24,7]hexadeca-1(12),4,6,10,13,15-hexaene, mixed isomers0 %1.1.2007 — 31.12.2008
ex 2903 69 90201,2-Bis(pentabromophenyl)ethane0 %1.1.2007 — 31.12.2008
ex 2903 69 90402,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing:

—0,001 mg/kg or less of tetrachlorodibenzodioxines,

—0,001 mg/kg or less of tetrachlorodibenzofurans,

—0,2 mg/kg or less of tetrachlorobiphenyls
0 %1.1.2007 — 31.12.2008
ex 2903 69 90501-(Chloromethyl)naphthalene0 %1.1.2007 — 31.12.2008
ex 2903 69 9060α-Chloro(ethyl)toluenes0 %1.1.2007 — 31.12.2008
ex 2904 10 0030Sodium p-styrenesulfonate0 %1.1.2007 — 31.12.2008
ex 2904 20 0010Nitromethane0 %1.1.2007 — 31.12.2008
ex 2904 20 0020Nitroethane0 %1.1.2007 — 31.12.2008
ex 2904 20 00301-Nitropropane0 %1.1.2007 — 31.12.2008
ex 2904 20 00402-Nitropropane0 %1.1.2007 — 31.12.2008
ex 2904 20 00502,2'-Dinitro-bibenzyl0 %1.1.2007 — 31.12.2008
ex 2904 90 2010Tosyl chloride0 %1.1.2007 — 31.12.2008
ex 2904 90 4010Trichloronitromethane, for the manufacture of goods of subheading 3808 92 (1)0 %1.1.2007 — 31.12.2008
ex 2904 90 8510Quintozene (ISO)0 %1.1.2007 — 31.12.2008
ex 2904 90 85201-Chloro-2,4-dinitrobenzene0 %1.1.2007 — 31.12.2008
ex 2904 90 85305-Nitro-1,2,4-trichlorobenzene0 %1.1.2007 — 31.12.2008
ex 2904 90 85403-Bromo-5-nitro-trifluoromethyl benzene0 %1.1.2007 — 31.12.2008
ex 2905 19 0011Potassium tert-butanolate (potassium tert-butoxide), whether or not in the form of a solution in tetrahydrofuran0 %1.1.2007 — 31.12.2008
ex 3824 90 9856
ex 2905 19 00302,6-Dimethylheptan-4-ol0 %1.1.2007 — 31.12.2008
ex 2905 39 8520Hexa-1,5-diene-3,4-diol0 %1.1.2007 — 31.12.2008
ex 2905 49 1010Ethylidynetrimethanol0 %1.1.2007 — 31.12.2008
2906 11 00Menthol0 %1.1.2007 — 31.12.2008
ex 2906 19 0010Cyclohex-1,4-ylenedimethanol0 %1.1.2007 — 31.12.2008
ex 2906 19 00204,4'-Isopropylidenedicyclohexanol0 %1.1.2007 — 31.12.2008
ex 2906 29 00102,2'-(m-Phenylene)dipropan-2-ol0 %1.1.2007 — 31.12.2008
ex 2906 29 00201-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene0 %1.1.2007 — 31.12.2008
ex 2907 19 90102,3,5-Trimethylphenol0 %1.1.2007 — 31.12.2008
ex 2907 21 0010Resorcinol0 %1.1.2007 — 31.12.2008
ex 2907 29 0010Disodium 1,4-dihydroanthracene-9,10-diolate, in the form of an aqueous solution0 %1.1.2007 — 31.12.2008
ex 2907 29 00204,4'-(3,3,5-Trimethylcyclohexylidene)diphenol0 %1.1.2007 — 31.12.2008
ex 2907 29 00304,4',4"-Ethylidynetriphenol0 %1.1.2007 — 31.12.2008
ex 2907 29 0040Mixture of isomers of methylenediphenol0 %1.1.2007 — 31.12.2008
ex 2907 29 00506,6',6"-Tricyclohexyl-4,4',4"-butane-1,1,3-triyltri(m-cresol)0 %1.1.2007 — 31.12.2008
ex 2907 29 00604,4'-(1,3-Phenylenediisopropylidene)diphenol0 %1.1.2007 — 31.12.2008
ex 2907 29 00702,2',2",6,6',6"-Hexa-tert-butyl-α,α',α "-(mesitylene-2,4,6-triyl)tri-p-cresol0 %1.1.2007 — 31.12.2008
ex 2907 29 0080Pyrogallol0 %1.1.2007 — 31.12.2008
ex 2907 29 0085Phloroglucinol whether or not hydrated0 %1.1.2007 — 31.12.2008
ex 2908 99 1010Disodium 3-hydroxynaphthalene-2,7-disulfonate0 %1.1.2007 — 31.12.2008
ex 2908 99 1020Dipotassium 7-hydroxynaphthalene-1,3-disulfonate0 %1.1.2007 — 31.12.2008
ex 2908 99 10306-Hydroxynaphthalene-2-sulfonic acid and its salts0 %1.1.2007 — 31.12.2008
ex 3824 90 9874
ex 2908 99 90104-Nitroso-o-cresol0 %1.1.2007 — 31.12.2008
ex 2908 99 90304-Nitrophenol0 %1.1.2007 — 31.12.2008
ex 2908 99 90403-Nitro-p-cresol0 %1.1.2007 — 31.12.2008
ex 2909 19 00101,2-Bis(2-chloroethoxy)ethane0 %1.1.2007 — 31.12.2008
ex 2909 19 0020Bis(2-chloroethyl) ether0 %1.1.2007 — 31.12.2008
ex 2909 19 0030Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more0 %1.1.2007 — 31.12.2008
ex 2909 19 0040Bis(2-ethoxyethyl)ether0 %1.1.2007 — 31.12.2008
ex 2909 19 00503-Ethoxy-perfluoro-2-methylhexane0 %1.1.2007 — 31.12.2011
ex 2909 30 3810Bis(pentabromophenyl) ether0 %1.1.2007 — 31.12.2008
ex 2909 30 90104-(p-Tolyloxy)biphenyl0 %1.1.2007 — 31.12.2008
ex 2909 30 90201,2-Bis(m-tolyloxy)ethane0 %1.1.2007 — 31.12.2008
ex 2909 30 90301,2-Diphenoxyethane0 %1.1.2007 — 31.12.2008
ex 2909 44 00102-Hexyloxyethanol0 %1.1.2007 — 31.12.2008
ex 2909 49 18101-tert-Butoxypropan-2-ol0 %1.1.2007 — 31.12.2008
ex 2909 50 90104-(2-Methoxyethyl)phenol0 %1.1.2007 — 31.12.2008
ex 2909 60 0010Bis(α, α-dimethylbenzyl) peroxide0 %1.1.2007 — 31.12.2008
ex 2910 90 00302,3-Epoxypropan-1-ol (glycidol)0 %1.1.2007 — 31.12.2008
ex 2910 90 0040Perfluoroepoxypropane0 %1.1.2007 — 31.12.2008
ex 2910 90 00601,2-Epoxyoctadecane, of a purity by weight of 82 % or more0 %1.1.2007 — 31.12.2008
ex 3824 90 9859
ex 2910 90 0070(Epoxyethyl)benzene (styrene oxide)0 %1.1.2007 — 31.12.2008
ex 2912 29 0010Terephthalaldehyde0 %1.1.2007 — 31.12.2008
ex 2912 29 0020p-Phenylbenzaldehyde0 %1.1.2007 — 31.12.2008
ex 2912 49 00103-Phenoxybenzaldehyde0 %1.1.2007 — 31.12.2008
ex 2912 49 00204-Hydroxybenzaldehyde0 %1.1.2007 — 31.12.2011
ex 2914 19 90103,3-Dimethylbutan-2-one0 %1.1.2007 — 31.12.2008
2914 21 00Camphor0 %1.1.2007 — 31.12.2008
ex 2914 29 0010Estr-4-ene-3,17-dione0 %1.1.2007 — 31.12.2008
ex 2914 29 0020Cyclohexadec-8-enone0 %1.1.2007 — 31.12.2008
ex 2914 39 0010Benz[de]anthracen-7-one0 %1.1.2007 — 31.12.2008
ex 2914 50 00302'-Hydroxyacetophenone0 %1.1.2007 — 31.12.2008
ex 2914 50 00404'-Hydroxyacetophenone0 %1.1.2007 — 31.12.2008
ex 2914 50 00506'-Methoxy-2'-acetonaphthone0 %1.1.2007 — 31.12.2008
ex 2914 69 90102-Ethylanthraquinone0 %1.1.2007 — 31.12.2008
ex 2914 69 90202-Pentylanthraquinone0 %1.1.2007 — 31.12.2008
ex 2914 69 90301,4-Dihydroxyanthraquinone0 %1.1.2007 — 31.12.2008
ex 2914 69 90402,3-Dihydro-1,4-dihydroxyanthraquinone0 %1.1.2007 — 31.12.2008
ex 2914 69 90502-Methylanthraquinone0 %1.1.2007 — 31.12.2008
ex 2914 70 00101-Chloro-3,3-dimethylbutan-2-one0 %1.1.2007 — 31.12.2008
ex 2914 70 00304,4'-Dibromobenzil0 %1.1.2007 — 31.12.2008
ex 2914 70 0040Perfluoro(2-methylpentan-3-one)0 %1.1.2007 — 31.12.2008
ex 2914 70 00503'-Chloropropiophenone0 %1.1.2007 — 31.12.2008
ex 2915 29 0010Antimony triacetate0 %1.1.2007 — 31.12.2008
ex 2915 39 80205α-Bromo-6β-hydroxy-17-oxo-androstan-3β-yl acetate0 %1.1.2007 — 31.12.2008
ex 2915 39 8030But-3-ene-1,2-diyl di(acetate)0 %1.1.2007 — 31.12.2008
ex 2915 39 8040tert-Butyl acetate0 %1.1.2007 — 31.12.2008
ex 2915 39 80503-Acetylphenyl acetate0 %1.1.2007 — 31.12.2008
ex 2915 39 80601-Phenylethyl acetate0 %1.1.2007 — 31.12.2008
ex 2915 40 0010Vinyl chloroacetate0 %1.1.2007 — 31.12.2008
ex 2915 90 8020Trimethyl orthoacetate0 %1.1.2007 — 31.12.2008
ex 2915 90 80302-Ethylbutyric acid0 %1.1.2007 — 31.12.2008
ex 2915 90 8040Nonanoic acid (pelargonic acid)0 %1.1.2007 — 31.12.2008
ex 2916 12 90102-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate0 %1.1.2007 — 31.12.2008
ex 2916 12 90202-Ethoxyethyl acrylate0 %1.1.2007 — 31.12.2008
ex 2916 12 9030Isobutyl acrylate0 %1.1.2007 — 31.12.2008
ex 2916 12 90402,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate0 %1.1.2007 — 31.12.2008
ex 2916 13 0010Hydroxyzinc methacrylate, in the form of powder0 %1.1.2007 — 31.12.2008
ex 2916 13 0020Zinc dimethacrylate, in the form of powder0 %1.1.2007 — 31.12.2008
ex 2916 14 90102,3-Epoxypropyl methacrylate0 %1.1.2007 — 31.12.2008
ex 2916 19 7020Methyl 3,3-dimethylpent-4-enoate0 %1.1.2007 — 31.12.2008
ex 2916 20 0010Methyl 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate0 %1.1.2007 — 31.12.2008
ex 2916 20 0030Empenthrin (ISO)0 %1.1.2007 — 31.12.2008
ex 2916 20 0050Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate0 %1.1.2007 — 31.12.2008
ex 2916 39 0015Biphenyl-4-carboxylic acid0 %1.1.2007 — 31.12.2008
ex 2916 39 00203,5-Dichlorobenzoyl chloride3,6 %1.1.2007 — 31.12.2008
ex 2916 39 0025p-Toluic acid0 %1.1.2007 — 31.12.2008
ex 2916 39 0035o-Chlorophenylacetic acid0 %1.1.2007 — 31.12.2008
ex 2916 39 0040Vinyl 4-tert-butylbenzoate0 %1.1.2007 — 31.12.2008
ex 2916 39 00503,5-Dimethylbenzoyl chloride0 %1.1.2007 — 31.12.2008
ex 2916 39 00604-Ethylbenzoyl chloride0 %1.1.2007 — 31.12.2008
ex 2916 39 0070Ibuprofen (INN)0 %1.1.2007 — 31.12.2008
ex 2916 39 0080Ethyl 2-(4-nitrophenyl)butyrate0 %1.1.2007 — 31.12.2008
ex 2916 39 00852,6-Difluorobenzoic acid0 %1.1.2007 — 31.12.2008
ex 2917 11 0020Bis(p-methylbenzyl) oxalate0 %1.1.2007 — 31.12.2008
ex 2917 19 9020Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulfonate0 %1.1.2007 — 31.12.2008
ex 2917 19 9040Dodecanedioic acid, of a purity by weight of more than 98,5 %0 %1.1.2007 — 31.12.2008
ex 2917 19 9050Glutaric anhydride0 %1.1.2007 — 31.12.2008
ex 2917 19 9060Diethyl isobutylmalonate0 %1.1.2007 — 31.12.2008
ex 2917 19 9070Itaconic acid0 %1.1.2007 — 31.12.2008
ex 2917 20 00301,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride0 %1.1.2007 — 31.12.2008
ex 2917 20 00403-Methyl-1,2,3,6-tetrahydrophthalic anhydride0 %1.1.2007 — 31.12.2008
ex 2917 34 9010Diallyl phthalate0 %1.1.2007 — 31.12.2008
ex 2917 39 8010Dimethyl naphthalene-2,6-dicarboxylate0 %1.1.2007 — 31.12.2008
ex 2917 39 8020Benzene-1,2,4,5-tetracarboxylic acid (pyromellitic acid)0 %1.1.2007 — 31.12.2008
ex 2917 39 8030Benzene-1,2:4,5-tetracarboxylic dianhydride (pyromellitic dianhydride)0 %1.1.2007 — 31.12.2008
ex 2917 39 8040Biphenyl-3,4:3',4'-tetracarboxylic dianhydride0 %1.1.2007 — 31.12.2008
ex 2918 13 0010L-(-)-Di-p-toluoyltartaric acid0 %1.1.2007 — 31.12.2008
ex 2918 19 8520L-Malic acid0 %1.1.2007 — 31.12.2008
ex 2918 19 85302,2-Bis(hydroxymethyl)butyric acid0 %1.1.2007 — 31.12.2008
ex 2918 19 8550DL-mandelic acid0 %1.1.2007 — 31.12.2008
ex 2918 29 1010Monohydroxynaphthoic acids0 %1.1.2007 — 31.12.2008
ex 2918 29 8010Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate]0 %1.1.2007 — 31.12.2008
ex 2918 29 8020Gallic acid, of a purity by weight of 98,5 % or more calculated on the dry weight (measured by acidimetry)0 %1.1.2007 — 31.12.2008
ex 2918 29 8030Octadecyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate0 %1.1.2007 — 31.12.2011
ex 2918 30 00202-(4-Ethylbenzoyl)benzoic acid0 %1.1.2007 — 31.12.2008
ex 2918 99 90103,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate0 %1.1.2007 — 31.12.2008
ex 2918 99 9020Methyl 3-methoxyacrylate0 %1.1.2007 — 31.12.2008
ex 2918 99 9030Methyl 2-(4-hydroxyphenoxy)propionate0 %1.1.2007 — 31.12.2008
ex 2918 99 9040trans-4-Hydroxy-3-methoxycinnamic acid0 %1.1.2007 — 31.12.2008
ex 2918 99 9050Methyl 3,4,5-trimethoxybenzoate0 %1.1.2007 — 31.12.2008
ex 2918 99 90603,4,5-Trimethoxybenzoic acid0 %1.1.2007 — 31.12.2008
ex 2918 99 9070methyl 5-methoxy-3-oxopentanoate0 %1.1.2007 — 31.12.2008
ex 2919 90 90102,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt0 %1.1.2007 — 31.12.2008
ex 2919 90 9020Diammonium salt of tetramyristoylcardiolipin0 %1.1.2007 — 31.12.2008
ex 2919 90 9030Aluminium hydroxybis[2,2'-methylenebis(4,6-di-tert-butylphenyl)phosphate]0 %1.1.2007 — 31.12.2008
ex 2919 90 9040Tri-n-hexylphosphate0 %1.1.2007 — 31.12.2008
ex 2920 19 0010Fenitrothion (ISO)0 %1.1.2007 — 31.12.2008
ex 2920 19 0020Tolclofos-methyl (ISO)0 %1.1.2007 — 31.12.2008
ex 2920 90 1010Diethyl sulfate0 %1.1.2007 — 31.12.2008
ex 2920 90 1020Diallyl 2,2'-oxydiethyl dicarbonate0 %1.1.2007 — 31.12.2008
ex 2920 90 10304-Ethyl-1,3-dioxolan-2-one0 %1.1.2007 — 31.12.2008
ex 2920 90 1040Dimethyl carbonate0 %1.1.2007 — 31.12.2008
ex 2920 90 1050Di-tert-butyl dicarbonate0 %1.1.2007 — 31.12.2008
2920 90 30Trimethyl phosphite0 %1.1.2007 — 31.12.2008
ex 2920 90 8510O, O'-Dioctadecyl pentaerythritol bis(phosphite)0 %1.1.2007 — 31.12.2008
ex 2920 90 8540Tritolyl phosphite0 %1.1.2007 — 31.12.2008
ex 2920 90 8550Triisooctylphosphite0 %1.1.2007 — 31.12.2008
ex 2921 19 8010Triallylamine0 %1.1.2007 — 31.12.2008
ex 2921 19 8020Ethyl(2-methylallyl)amine0 %1.1.2007 — 31.12.2008
ex 2921 19 8030Allylamine0 %1.1.2007 — 31.12.2008
ex 2921 29 0010N, N,N ' ,N '-Tetrabutylhexamethylenediamine0 %1.1.2007 — 31.12.2008
ex 2921 29 0020Tris[3-(dimethylamino)propyl]amine0 %1.1.2007 — 31.12.2008
ex 2921 29 0030Bis[3-(dimethylamino)propyl]methylamine0 %1.1.2007 — 31.12.2008
ex 2921 29 0040N, N'-Di-tert-butylethylenediamine0 %1.1.2007 — 31.12.2008
ex 2921 30 9910Dicyclohexyl(methyl)amine0 %1.1.2007 — 31.12.2008
ex 2921 30 9920Cyclohex-1,3-ylenebis(methylamine), for the manufacture of dishwashing products (1)0 %1.1.2007 — 31.12.2008
ex 2921 42 10102,6-Dichloro-4-nitroaniline0 %1.1.2007 — 31.12.2008
ex 2921 42 10154-Amino-3-nitrobenzenesulphonic acid0 %1.1.2007 — 31.12.2008
ex 2921 42 10202-Bromo-4,6-dinitroaniline0 %1.1.2007 — 31.12.2008
ex 2921 42 1025Sodium hydrogen 2-aminobenzene-1,4-disulphonate0 %1.1.2007 — 31.12.2008
ex 2921 42 10304-Aminobenzene-1,3-disulfonic acid and its salts0 %1.1.2007 — 31.12.2008
ex 2921 42 10352-Nitroaniline0 %1.1.2007 — 31.12.2008
ex 2921 42 10402-Bromo-6-chloro-4-nitroaniline0 %1.1.2007 — 31.12.2008
ex 2921 42 10452,4,5-Trichloroaniline0 %1.1.2007 — 31.12.2008
ex 2921 42 10503-Aminobenzenesulfonic acid0 %1.1.2007 — 31.12.2008
ex 2921 42 10702-Aminobenzene-1,4-disulfonic acid0 %1.1.2007 — 31.12.2008
ex 2921 42 10804-Chloro-2-nitroaniline0 %1.1.2007 — 31.12.2008
ex 2921 42 10853,5-Dichloroaniline0 %1.1.2007 — 31.12.2008
ex 2921 43 00105-Amino-2-chlorotoluene-4-sulfonic acid0 %1.1.2007 — 31.12.2008
ex 2921 43 00204-Amino-6-chlorotoluene-3-sulfonic acid0 %1.1.2007 — 31.12.2008
ex 2921 43 00303-Nitro-p-toluidine0 %1.1.2007 — 31.12.2008
ex 2921 43 00404-Aminotoluene-3-sulphonic acid0 %1.1.2007 — 31.12.2008
ex 2921 44 0010Methyldiphenylamine0 %1.1.2007 — 31.12.2008
ex 2921 44 0020Diphenylamine0 %1.1.2007 — 31.12.2008
ex 2921 45 0010Sodium hydrogen 3-aminonaphthalene-1,5-disulfonate0 %1.1.2007 — 31.12.2008
ex 2921 45 00202-Aminonaphthalene-1,5-disulfonic acid and its sodium salts0 %1.1.2007 — 31.12.2008
ex 2921 45 00302-Aminonaphthalene-1-sulfonic acid0 %1.1.2007 — 31.12.2008
ex 2921 45 00401-Naphthylamine0 %1.1.2007 — 31.12.2008
ex 2921 49 1020Pendimethalin (ISO)3,5 %1.1.2007 — 31.12.2008
ex 2921 49 80108-Anilinonaphthalene-1-sulfonic acid0 %1.1.2007 — 31.12.2008
ex 2921 49 8020N-1-Naphthylaniline0 %1.1.2007 — 31.12.2008
ex 2921 51 1920Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight0 %1.1.2007 — 31.12.2008
ex 2921 51 19302-Methyl-p-phenylenediamine sulphate0 %1.1.2007 — 31.12.2008
ex 2921 59 9010Mixture of isomers of 3,5-diethyltoluenediamine0 %1.1.2007 — 31.12.2008
ex 2921 59 90204-(4-Aminoanilino)-3-nitrobenzenesulfonic acid0 %1.1.2007 — 31.12.2008
ex 3824 90 9868
ex 2921 59 90404,4'-diaminostilbene-2,2'-disulphonic acid0 %1.1.2007 — 31.12.2008
ex 2922 19 80104,4-Dimethoxybutylamine0 %1.1.2007 — 31.12.2008
ex 2922 19 8030N, N,N',N'-Tetramethyl-2,2'-oxybis(ethylamine)0 %1.1.2007 — 31.12.2008
ex 2922 19 80402-Amino-2-methylpropanol, for use in the manufacture of goods of subheadings3004 90 and 3305 30 (1)0 %1.1.2007 — 31.12.2008
ex 2922 19 80502-(2-Methoxyphenoxy)ethylamine0 %1.1.2007 — 31.12.2008
ex 2922 19 8060N, N,N'-trimethyl-N'-(2-hydroxy-ethyl) 2,2'-oxybis(ethylamine)0 %1.1.2007 — 31.12.2008
ex 2922 19 8070D-(-)-threo-2-amino-1-(p-nitrophenyl)propane-1,3-diol0 %1.1.2007 — 31.12.2011
ex 2922 21 00102-Amino-5-hydroxynaphthalene-1,7-disulfonic acid and its salts, of a purity by weight of 60 % or more0 %1.1.2007 — 31.12.2008
ex 2922 21 00204-Hydroxy-7-methylaminonaphthalene-2-sulfonic acid0 %1.1.2007 — 31.12.2008
ex 2922 21 00306-Amino-4-hydroxynaphthalene-2-sulfonic acid0 %1.1.2007 — 31.12.2008
ex 2922 21 00407-Amino-4-hydroxynaphthalene-2-sulfonic acid0 %1.1.2007 — 31.12.2008
ex 2922 21 0050Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate0 %1.1.2007 — 31.12.2008
ex 2922 29 00102-Methyl-N-phenyl-p-anisidine0 %1.1.2007 — 31.12.2008
ex 2922 29 0015N-Methyl-2-(3,4-dimethoxyphenyl)ethylamine0 %1.1.2007 — 31.12.2008
ex 2922 29 00203-Aminophenol0 %1.1.2007 — 31.12.2008
ex 2922 29 00255-Amino-o-cresol0 %1.1.2007 — 31.12.2008
ex 2922 29 00304-Amino-5-methoxy-2-methylbenzenesulfonic acid0 %1.1.2007 — 31.12.2008
ex 2922 29 00352-Amino-4,6-dinitrophenol sodium salt, containing at least 20 % water0 %1.1.2007 — 31.12.2011
ex 2922 29 00402-Amino-4-tert-pentyl-6-nitrophenol0 %1.1.2007 — 31.12.2008
ex 2922 29 0045Anisidines0 %1.1.2007 — 31.12.2008
ex 2922 29 00506-Methoxy-m-toluidine0 %1.1.2007 — 31.12.2008
ex 2922 29 00603,5-Dichloro-4-(1,1,2,2-tetrafluoroethoxy)aniline0 %1.1.2007 — 31.12.2008
ex 2922 29 00704-Nitro-o-anisidine0 %1.1.2007 — 31.12.2008
ex 2922 29 00803-Diethylaminophenol0 %1.1.2007 — 31.12.2008
ex 2922 39 00101-Amino-4-bromo-9,10-dioxoanthracene-2-sulfonic acid and its salts0 %1.1.2007 — 31.12.2008
ex 2922 39 00201-Aminoanthraquinone0 %1.1.2007 — 31.12.2008
ex 2922 39 00301-Bromo-4-methylaminoanthraquinone0 %1.1.2007 — 31.12.2008
ex 2922 39 00401,4-Diamino-2,3-dichloroanthraquinone0 %1.1.2007 — 31.12.2008
ex 2922 39 00502-Aminoanthraquinone0 %1.1.2007 — 31.12.2008
ex 2922 39 00601,4-Diamino-2,3-dihydroanthraquinone0 %1.1.2007 — 31.12.2008
ex 2922 39 0070p-[(2-Chloroethyl)ethylamino]benzaldehyde0 %1.1.2007 — 31.12.2011
ex 2922 43 0010Anthranilic acid0 %1.1.2007 — 31.12.2008
ex 2922 49 9510Ornithine aspartate (INNM)0 %1.1.2007 — 31.12.2008
ex 2922 49 952012-Aminododecanoic acid0 %1.1.2007 — 31.12.2008
ex 2922 49 9530DL-Aspartic acid0 %1.1.2007 — 31.12.2008
ex 2922 49 9540Norvaline0 %1.1.2007 — 31.12.2008
ex 2922 49 9550D-(-)-Dihydrophenylglycine0 %1.1.2007 — 31.12.2008
ex 2922 50 00302-(3-Amino-4-chlorobenzoyl)benzoic acid0 %1.1.2007 — 31.12.2008
ex 2922 50 00502-(4-Dibutylaminosalicyloyl)benzoic acid0 %1.1.2007 — 31.12.2008
ex 2922 50 00702-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate0 %1.1.2007 — 31.12.2008
ex 2923 90 0010Tetramethylammonium hydroxide, in the form of an aqueous solution containing:

—(25 ± 0,5) % by weight of tetramethylammonium hydroxide,

—500 mg/kg or less of carbonate,

—200 mg/kg or less of chloride and

—5 mg/kg or less of potassium
0 %1.1.2007 — 31.12.2008
ex 2923 90 00153-Chloro-2-hydroxypropyldimethyldodecylammoniumchloride in the form of an aqueous solution0 %1.1.2007 — 31.12.2008
ex 2923 90 0030Tetramethylammonium hydroxide pentahydrate, of a purity by weight of 98 % or more0 %1.1.2007 — 31.12.2008
ex 2923 90 0035Tetrabutylammonium fluoride trihydrate0 %1.1.2007 — 31.12.2011
ex 2923 90 0040Benzyldimethyl(octadecyl)ammonium salts, for use in the manufacture of toner for photocopiers (1)0 %1.1.2007 — 31.12.2008
ex 2923 90 0050Tetraethylammonium hydroxide, in the form of an aqueous solution containing:

—(35 ± 0,5) % by weight of tetraethylammonium hydroxide,

—2 000 mg/kg or less of chloride,

—2 mg/kg or less of iron and

—10 mg/kg or less of potasium
0 %1.1.2007 — 31.12.2008
ex 2923 90 0060Tetrabutylammonium hydroxide, in the form of an aqueous solution containing by weight:

—(55 ± 1,0) % of tetrabutylammonium hydroxide,

—0,5 % or less of bromide,

—0,4 % or less of tributylamine,

—0,3 % or less of carbonate and

—0,2 % or less of potassium and sodium taken together
0 %1.1.2007 — 31.12.2008
ex 2923 90 0070Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:

—(40 ± 2) % by weight of tetrapropylammonium hydroxide,

—0,3 % by weight or less of carbonate,

—0,1 % by weight or less of tripropylamine,

—500 mg/kg or less of bromide and

—25 mg/kg or less of potassium and sodium taken together
0 %1.1.2007 — 31.12.2008
ex 2923 90 0080Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride0 %1.1.2007 — 31.12.2008
ex 2924 19 00102-Acrylamido-2-methylpropanesulfonic acid and its sodium or ammonium salts0 %1.1.2007 — 31.12.2008
ex 2924 19 0030Methyl 2-acetamido-3-chloropropionate0 %1.1.2007 — 31.12.2008
ex 2924 19 0040N-(1,1-Dimethyl-3-oxobutyl)acrylamide0 %1.1.2007 — 31.12.2008
ex 2924 19 0050Acrylamide0 %1.1.2007 — 31.12.2008
ex 2924 21 90104,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts0 %1.1.2007 — 31.12.2008
ex 3824 90 9862
ex 2924 29 9510Alachlor (ISO)0 %1.1.2007 — 31.12.2008
ex 2924 29 9515Acetochlor (ISO)0 %1.1.2007 — 31.12.2008
ex 2924 29 95203'-Amino-4'-methoxyacetanilide0 %1.1.2007 — 31.12.2008
ex 2924 29 95253'-Diethylaminoacetanilide0 %1.1.2007 — 31.12.2008
ex 2924 29 9530Propachlor (ISO)0 %1.1.2007 — 31.12.2008
ex 2924 29 9535Diethofencarb (ISO)0 %1.1.2007 — 31.12.2008
ex 2924 29 95407-Acetamido-4-hydroxynaphthalene-2-sulfonic acid and its sodium salts0 %1.1.2007 — 31.12.2008
ex 2924 29 95453'-Diethylamino-4'-methoxyacetanilide0 %1.1.2007 — 31.12.2008
ex 2924 29 95505-[N-(2-Acetoxyethyl)acetoxyacetamido]-N, N'-bis(2,3-diacetoxypropyl)-2,4,6-triiodoisophthalamide0 %1.1.2007 — 31.12.2008
ex 2924 29 95554'-Amino-N-methylacetanilide0 %1.1.2007 — 31.12.2008
ex 2924 29 9560Beflubutamid (ISO)0 %1.1.2007 — 31.12.2008
ex 2924 29 95652-(4-Hydroxyphenyl)acetamide0 %1.1.2007 — 31.12.2008
ex 2924 29 95704-Acetamido-2-aminobenzenesulfonic acid0 %1.1.2007 — 31.12.2008
ex 2924 29 95753-Amino-p-anisanilide0 %1.1.2007 — 31.12.2008
ex 2924 29 95805'-Chloro-3-hydroxy-2',4'-dimethoxy-2-naphtanilide0 %1.1.2007 — 31.12.2008
ex 2924 29 9585p-Aminobenzamide0 %1.1.2007 — 31.12.2008
ex 2924 29 95913-Hydroxy-2'-methoxy-2-naphthanilide0 %1.1.2007 — 31.12.2008
ex 2924 29 95923-Hydroxy-2-naphthanilide0 %1.1.2007 — 31.12.2008
ex 2924 29 95933-Hydroxy-2'-methyl-2-naphthanilide0 %1.1.2007 — 31.12.2008
ex 2924 29 95942'-Ethoxy-3-hydroxy-2-naphthanilide0 %1.1.2007 — 31.12.2008
ex 2924 29 9595N-{3-[3-(Dimethylamino)prop-2-enoyl]phenyl}-N-ethylacetamide0 %1.1.2007 — 31.12.2008
ex 2924 29 95964'-Chloro-3-hydroxy-2',5'-dimethoxy-2-naphthanilide0 %1.1.2007 — 31.12.2008
ex 2924 29 95971,1-Cyclohexanediacetic acid monoamide0 %1.1.2007 — 31.12.2008
ex 2925 11 0020Saccharin and its sodium salt0 %1.1.2007 — 31.12.2008
ex 2925 19 9510N-Phenylmaleimide0 %1.1.2007 — 31.12.2008
ex 2925 19 9520N-(9-Fluorenylmethoxycarbonyloxy)succinimide0 %1.1.2007 — 31.12.2008
ex 2925 29 0010Dicyclohexylcarbodiimide0 %1.1.2007 — 31.12.2008
ex 2926 90 9510Methacrylonitrile0 %1.1.2007 — 31.12.2008
ex 2926 90 9515Cyano(3-phenoxyphenyl)methyl 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate0 %1.1.2007 — 31.12.2008
ex 2926 90 95202-(m-Benzoylphenyl)propiononitrile0 %1.1.2007 — 31.12.2008
ex 2926 90 9525Aminoacetonitrile hydrochloride0 %1.1.2007 — 31.12.2008
ex 2926 90 95302-Amino-5-nitrobenzonitrile0 %1.1.2007 — 31.12.2008
ex 2926 90 95352-Bromo-2(bromomethyl)pentanedinitrile0 %1.1.2007 — 31.12.2008
ex 2926 90 95452-Cyanoacetamide0 %1.1.2007 — 31.12.2008
ex 2926 90 9550Alkyl or alkoxyalkyl esters of cyanoacetic acid0 %1.1.2007 — 31.12.2008
ex 2926 90 9555Methyl-2-cyano-2-phenylbutyrate0 %1.1.2007 — 31.12.2011
ex 2926 90 9560Cyanoacetic acid in crystalline form0 %1.1.2007 — 31.12.2008
ex 2926 90 9565Malononitrile0 %1.1.2007 — 31.12.2008
ex 2926 90 9570Tetrachloroterephthalonitrile0 %1.1.2007 — 31.12.2008
ex 2926 90 9575Ethyl 2-cyano-2-ethyl-3-methylhexanoate0 %1.1.2007 — 31.12.2008
ex 2926 90 9580Ethyl 2-cyano-2-phenylbutyrate0 %1.1.2007 — 31.12.2008
ex 2926 90 9585Ethyl 2-allyl-2-cyano-3-methylhexanoate0 %1.1.2007 — 31.12.2008
ex 2926 90 9586Ethylenediaminetetraacetonitrile0 %1.1.2007 — 31.12.2008
ex 2926 90 9587Nitrilotriacetonitrile0 %1.1.2007 — 31.12.2008
ex 2926 90 95881,3-Propylenediaminetetraacetonitrile0 %1.1.2007 — 31.12.2008
ex 2926 90 9589Butyronitrile0 %1.1.2007 — 31.12.2008
ex 2927 00 00102,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride0 %1.1.2007 — 31.12.2008
ex 2927 00 00204-Anilino-2-methoxybenzenediazonium hydrogen sulfate0 %1.1.2007 — 31.12.2008
ex 2927 00 00304'-Aminoazobenzene-4-sulfonic acid0 %1.1.2007 — 31.12.2008
ex 3824 90 9869
ex 2927 00 00402-Hydroxynaphthalene-1-diazonium-4-sulfonate0 %1.1.2007 — 31.12.2008
ex 2927 00 00502-Hydroxy-6-nitronaphthalene-1-diazonium-4-sulfonate, of a purity by weight of 60 % or more0 %1.1.2007 — 31.12.2008
ex 3824 90 9841
ex 2927 00 00604,4'-Dicyano-4,4'-azodivaleric acid0 %1.1.2007 — 31.12.2008
ex 2928 00 90103,3'-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N, N '-bipropionamide0 %1.1.2007 — 31.12.2008
ex 2928 00 90151,1'-(Hydroxyimino)bis-(2-propanol)0 %1.1.2007 — 31.12.2011
ex 2928 00 90202,4,6-Trichlorophenylhydrazine0 %1.1.2007 — 31.12.2008
ex 2928 00 9040O-Ethylhydroxylamine, in the form of an aqueous solution0 %1.1.2007 — 31.12.2008
ex 2928 00 9050N-Isopropylhydroxylamine, in the form of an aqueous solution0 %1.1.2007 — 31.12.2008
ex 2928 00 9060Adipohydrazide0 %1.1.2007 — 31.12.2008
ex 2928 00 9070Tetrakis(4-methylpentan-2-oximino)silane0 %1.1.2007 — 31.12.2008
ex 2928 00 9080Cyflufenamid (ISO)0 %1.1.2007 — 31.12.2008
ex 2929 10 9010Methylenedicyclohexyl diisocyanates0 %1.1.2007 — 31.12.2008
ex 2929 10 90303,3'-Dimethylbiphenyl-4,4'-diyl diisocyanate0 %1.1.2007 — 31.12.2008
ex 2929 10 9040m-Isopropenyl-α, α-dimethylbenzyl isocyanate0 %1.1.2007 — 31.12.2008
ex 2929 10 9050m-Phenylenediisopropylidene diisocyanate0 %1.1.2007 — 31.12.2008
ex 2929 10 9060Trimethylhexamethylene diisocyanate, mixed isomers0 %1.1.2007 — 31.12.2008
ex 2929 10 90709,9'-(3-Heptyl-4-pentylcyclohex-1,2-ylene)dinonyl diisocyanate0 %1.1.2007 — 31.12.2008
ex 2929 90 0020Ethyl isocyanoacetate0 %1.1.2007 — 31.12.2008
ex 2930 90 8510Thiophenol0 %1.1.2007 — 31.12.2008
ex 2930 90 8515Ethoprophos (ISO)0 %1.1.2007 — 31.12.2008
ex 2930 90 85203,3-Dimethyl-1-methylthiobutanone oxime0 %1.1.2007 — 31.12.2008
ex 2930 90 8525Thiophanate-methyl (ISO)0 %1.1.2007 — 31.12.2008
ex 2930 90 85304-(4-Isopropoxyphenylsulfonyl)phenol0 %1.1.2007 — 31.12.2008
ex 2930 90 8535Glutathione0 %1.1.2007 — 31.12.2011
ex 2930 90 85403,3'-Thiodi(propionic acid)0 %1.1.2007 — 31.12.2008
ex 2930 90 85452-[(p-Aminophenyl)sulfonyl]ethyl hydrogen sulfate0 %1.1.2007 — 31.12.2008
ex 2930 90 85502-Chlorophenylsulfonyl isocyanate, in the form of a solution in xylene0 %1.1.2007 — 31.12.2008
ex 3824 90 9851
ex 2930 90 8560Methyl phenyl sulfide0 %1.1.2007 — 31.12.2008
ex 2930 90 8565Diiodomethyl p-tolyl sulfone0 %1.1.2007 — 31.12.2008
ex 2930 90 85702-Aminophenyl phenyl sulfone, of a purity by weight of 75 % or more0 %1.1.2007 — 31.12.2008
ex 3824 90 9871
ex 2930 90 85754,4'-[Methylenebis(oxyethylenethio)]diphenol0 %1.1.2007 — 31.12.2008
ex 2930 90 85762,2'-Dithiodi(benzoic acid)0 %1.1.2007 — 31.12.2008
ex 2930 90 85774-[4-(2-Propenyloxy)phenylsulphonyl]phenol0 %1.1.2007 — 31.12.2008
ex 2930 90 8580Captan (ISO)0 %1.1.2007 — 31.12.2008
ex 2930 90 8585Mesotrione (ISO)0 %1.1.2007 — 31.12.2008
ex 2930 90 85864-Hydroxybenzenethiol0 %1.1.2007 — 31.12.2008
ex 2930 90 85873-Sulfinobenzoic acid0 %1.1.2007 — 31.12.2008
ex 2930 90 8588Methylene dithiocyanate0 %1.1.2007 — 31.12.2008
ex 2930 90 8589Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates0 %1.1.2007 — 31.12.2011
2931 00 10Dimethyl methylphosphonate0 %1.1.2007 — 31.12.2008
ex 2931 00 9505Butylethylmagnesium, in the form of a solution in heptane0 %1.1.2007 — 31.12.2008
ex 2931 00 95102-Diphenylphosphinobenzoic acid0 %1.1.2007 — 31.12.2008
ex 2931 00 9520Bis(2-chloroethyl) 2-chloroethylphosphonate0 %1.1.2007 — 31.12.2008
ex 2931 00 9525Sodium phenylphosphinate0 %1.1.2007 — 31.12.2008
ex 2931 00 9530Bis(2-chloroethyl) vinylphosphonate0 %1.1.2007 — 31.12.2008
ex 2931 00 9535Sodium tetraphenylborate0 %1.1.2007 — 31.12.2008
ex 2931 00 9540N-(Phosphonomethyl)iminodiacetic acid0 %1.1.2007 — 31.12.2008
ex 2931 00 9545Tributylphosphine0 %1.1.2007 — 31.12.2008
ex 2931 00 9550Bis(2,4,4-trimethylpentyl)phosphinic acid0 %1.1.2007 — 31.12.2008
ex 2931 00 9555Dimethyl[dimethylsilyldiindenyl]hafnium0 %1.1.2007 — 31.12.2008
ex 2931 00 9560Trioctylphosphine oxide0 %1.1.2007 — 31.12.2008
ex 2931 00 9565Triethylborane0 %1.1.2007 — 31.12.2008
ex 2931 00 9570N, N-Dimethylanilinium tetrakis(pentafluorophenyl)borate0 %1.1.2007 — 31.12.2008
ex 2931 00 9575{2,7-Di-tert-butyl-9-[(η 5-cyclopentadienyl)bis(4-triethylsilylphenyl)methyl]-4a,4b,8a,9,9a-η-fluorene}dimethylhafnium, in the form of a solution in hexane0 %1.1.2007 — 31.12.2008
ex 2931 00 9584Methylbis(4-methylpentan-2-oximino)vinylsilane0 %1.1.2007 — 31.12.2008
ex 2931 00 9585Tributyl(tetradecyl)phosphonium chloride, whether or not in the form of an aqueous solution0 %1.1.2007 — 31.12.2008
ex 2931 00 9586Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane0 %1.1.2007 — 31.12.2008
ex 2931 00 9587Tris(4-methylpentan-2-oximino)methylsilane0 %1.1.2007 — 31.12.2008
ex 2931 00 9588Tris(4-methylpentan-2-oximino)vinylsilane0 %1.1.2007 — 31.12.2008
ex 2931 00 9589Tetrabutylphosphonium acetate, in the form of an aqueous solution0 %1.1.2007 — 31.12.2008
ex 2931 00 9591Trimethylsilane0 %1.1.2007 — 31.12.2011
ex 2931 00 9595Trichloro(3-chloropropyl)silane0 %1.1.2007 — 31.12.2008
ex 2931 00 95963-(Hydroxyphenylphosphinoyl)propionic acid0 %1.1.2007 — 31.12.2008
ex 2931 00 9597Potassium 4-tolylphosphinate, in the form of an aqueous solution0 %1.1.2007 — 31.12.2008
ex 2932 13 0010Tetrahydrofurfuryl alcohol0 %1.1.2007 — 31.12.2008
ex 2932 19 0040Furan of a purity by weight of 99 % or more0 %1.1.2007 — 31.12.2008
ex 2932 19 00502,3-Dihydrofuran0 %1.1.2007 — 31.12.2008
ex 2932 19 0070Furfurylamine0 %1.1.2007 — 31.12.2008
ex 2932 19 0075Tetrahydro-2-methylfuran0 %1.1.2007 — 31.12.2008
ex 2932 19 0080Octafluorotetrahydrofuran0 %1.1.2007 — 31.12.2008
ex 2932 29 85102'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one0 %1.1.2007 — 31.12.2008
ex 2932 29 851513,14,15,16-Tetranorlabdano-12,8α-lactone0 %1.1.2007 — 31.12.2008
ex 2932 29 85252'-(2-Chloroanilino)-6'-dibutylaminospiro[isobenzofuran-1(3H),9'-xanthen]-3-one0 %1.1.2007 — 31.12.2008
ex 2932 29 85302'-Anilino-3'-methyl-6'-methyl(propyl)aminospiro[isobenzofuran-1(3H),9'-xanthen]-3-one0 %1.1.2007 — 31.12.2008
ex 2932 29 85356'-Diethylamino-3'-methyl-2'-(2,4-xylidino)spiro[isobenzofuran-1(3H),9'-xanthen]-3-one0 %1.1.2007 — 31.12.2008
ex 2932 29 85402'-Anilino-6'-(N-ethyl-p-toluidino)-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one0 %1.1.2007 — 31.12.2008
ex 2932 29 85452'-Anilino-6'-ethyl(isobutyl)amino-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one0 %1.1.2007 — 31.12.2008
ex 2932 29 85502'-Anilino-6'-cyclohexyl(methyl)amino-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one0 %1.1.2007 — 31.12.2008
ex 2932 29 85556-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide0 %1.1.2007 — 31.12.2008
ex 2932 29 85703',6'-Bis(ethylamino)-2',7'-dimethylspiro[isobenzofuran-1(3H),9'-[9H]-xanthen]-3-one0 %1.1.2007 — 31.12.2008
ex 2932 29 8575Rofecoxib (INN)0 %1.1.2007 — 31.12.2008
ex 2932 29 8580Gibberellic acid with a minimum purity by weight of 88 %0 %1.1.2007 — 31.12.2008
ex 2932 99 7010Bendiocarb (ISO)0 %1.1.2007 — 31.12.2008
ex 2932 99 7020Androsta-1,4-diene-3,17-dione 17-(2,2-dimethylpropylene) acetal0 %1.1.2007 — 31.12.2008
ex 2932 99 70401,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol0 %1.1.2007 — 31.12.2008
ex 2932 99 70505-Propyl-1,3-benzodioxole0 %1.1.2007 — 31.12.2008
ex 2932 99 7060Calcium bis[4-O-(β-D-galactopyranosyl)-D-gluconate] dihydrate0 %1.1.2007 — 31.12.2008
ex 2932 99 70701,3:2,4—bis-O-Benzylidene-D-glucitol0 %1.1.2007 — 31.12.2011
ex 2932 99 70753-(3,4-Methylenedioxyphenyl)-2-methylpropanal0 %1.1.2007 — 31.12.2011
ex 2932 99 70801,3:2,4—bis-O-(4-Methylbenzylidene)-D-glucitol0 %1.1.2007 — 31.12.2011
ex 2932 99 8520(2-Butylbenzofuran-3-yl) (4-hydroxy-3,5-diiodophenyl) ketone0 %1.1.2007 — 31.12.2008
ex 2932 99 8530Carbofuran (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 19 90104,5-Diamino-l-(2-hydroxyethyl)-1H-pyrazole sulfate0 %1.1.2007 — 31.12.2008
ex 2933 19 90204-Amino-1-methyl-3-propylpyrazole-5-carboxamide0 %1.1.2007 — 31.12.2008
ex 2933 19 90303-Methyl-1-p-tolyl-5-pyrazolone0 %1.1.2007 — 31.12.2008
ex 2933 19 9040Edaravone (INN)0 %1.1.2007 — 31.12.2008
ex 2933 19 9050Fenpyroximate (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 21 0010Hydantoin0 %1.1.2007 — 31.12.2008
ex 2933 21 00202-(3-Benzyl-2,5-dioxoimidazolidin-1-yl)-2'-chloro-5'-(3-dodecylsulfonyl-2-methylpropionamido)-4,4-dimethyl-3-oxovaleranilide0 %1.1.2007 — 31.12.2008
ex 2933 21 00401-[1,3-Bis(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]-1,3-bis(hydroxymethyl)urea0 %1.1.2007 — 31.12.2008
ex 2933 21 00501-Bromo-3-chloro-5,5-dimethylhydantoin0 %1.1.2007 — 31.12.2011
ex 2933 21 0060DL-p-Hydroxyphenylhydantoin0 %1.1.2007 — 31.12.2011
ex 2933 29 9020Reaction product consisting of the methyl esters of (±)-6-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-m-toluic acid and (±)-2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-p-toluic acid (Imazamethabenz-methyl)4 %1.1.2007 — 31.12.2008
ex 2933 29 9040Triflumizole (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 29 90501,3-Dimethylimidazolidin-2-one0 %1.1.2007 — 31.12.2008
ex 2933 39 9910Cloperastine fendizoate (INNM)0 %1.1.2007 — 31.12.2008
ex 2933 39 9915Pyridine-2,3-dicarboxylic acid0 %1.1.2007 — 31.12.2008
ex 2933 39 99205-Methyl-2-pyridylamine0 %1.1.2007 — 31.12.2008
ex 2933 39 9925Imazethapyr (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 39 99304,4'-Trimethylenedipiperidine0 %1.1.2007 — 31.12.2008
ex 2933 39 9935Aminopyralid (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 39 99402-Chloropyridine0 %1.1.2007 — 31.12.2008
ex 2933 39 99453-(Carboxymethyl)pyridinium chloride0 %1.1.2007 — 31.12.2008
ex 2933 39 99602-Fluoro-6-(trifluoromethyl)pyridine0 %1.1.2007 — 31.12.2008
ex 2933 39 9965Acetamiprid (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 39 9970Etoricoxib (INN)0 %1.1.2007 — 31.12.2008
ex 2933 39 9975Picolinafen (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 49 1010Quinmerac (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 49 90205,7-Dichloro-4-(4-fluorophenoxy)quinoline0 %1.1.2007 — 31.12.2008
ex 2933 49 9040N-Ethyl-5,6,7,8-tetrahydroquinolinium p-toluenesulfonate, in the form of a solution in water0 %1.1.2007 — 31.12.2008
ex 2933 49 9050Methyl 2-[(S)-3-{(E)-3-[2-(7-chloro-2-quinolyl)vinyl]phenyl}-3-hydroxypropyl] benzoate monohydrate0 %1.1.2007 — 31.12.2008
ex 2933 49 90605,6,7,8-Tetrahydroquinoline0 %1.1.2007 — 31.12.2008
ex 2933 49 9070Quinolin-8-ol0 %1.1.2007 — 31.12.2008
ex 2933 52 0010Malonylurea (barbituric acid)0 %1.1.2007 — 31.12.2011
ex 2933 59 95101-Ethyl-6-fluoro-1,4-dihydro-4-oxo-7-piperazin-1-yl-1,8-naphthyridine-3-carboxylic acid and its salts and esters0 %1.1.2007 — 31.12.2008
ex 2933 59 9515(2R)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3—a] pyrazin-7(8H)-yl]-1-(2,4,5-trifluorophenyl)butyl-2-ammonium phosphate monohydrate0 %1.1.2007 — 31.12.2008
ex 2933 59 95202,4-Diamino-6-chloropyrimidine0 %1.1.2007 — 31.12.2008
ex 2933 59 95252,5-Diamino-4,6-dihydroxypyrimidine monohydrochloride monohydrate0 %1.1.2007 — 31.12.2008
ex 2933 59 9530Mepanipyrim (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 59 95354-Amino-2,6-dichloropyrimidine0 %1.1.2007 — 31.12.2011
ex 2933 59 9540Guanine0 %1.1.2007 — 31.12.2008
ex 2933 59 95501-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate)0 %1.1.2007 — 31.12.2008
ex 2933 59 95602,6-Dichloro-4,8-dipiperidinopyrimido[5,4—d]pyrimidine0 %1.1.2007 — 31.12.2008
ex 2933 59 9570N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine0 %1.1.2007 — 31.12.2008
ex 2933 59 9580N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-(4-hydroxyphenyl)glycine0 %1.1.2007 — 31.12.2008
ex 2933 59 9585Adenine0 %1.1.2007 — 31.12.2008
ex 2933 69 80201,3,5-Tris[(3,5-di-tert-butyl-4-hydroxyphenyl)methyl]-1,3,5-triazine-2,4,6(1H,3H,5H)-trione0 %1.1.2007 — 31.12.2008
ex 2933 69 8040Cyanazine (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 69 80501,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione0 %1.1.2007 — 31.12.2008
ex 2933 69 8060Hexazinone (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 69 8080Tris(2-hydroxyethyl)-1,3,5-triazinetrione0 %1.1.2007 — 31.12.2008
ex 2933 79 0010Ezetimibe (INN)0 %1.1.2007 — 31.12.2008
ex 2933 99 3010Azepane, for the manufacture of goods of subheading 3808 93 (1)0 %1.1.2007 — 31.12.2008
ex 2933 99 30205H-Dibenz[b, f]azepine-5-carbonyl chloride0 %1.1.2007 — 31.12.2008
ex 2933 99 90102-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol0 %1.1.2007 — 31.12.2008
ex 2933 99 90152-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol0 %1.1.2007 — 31.12.2008
ex 2933 99 90202-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol0 %1.1.2007 — 31.12.2008
ex 2933 99 90256,6'-Di-2H-benzotriazol-2-yl-4,4'-bis(1,1,3,3-tetramethylbutyl)-2,2'-methylenediphenol0 %1.1.2007 — 31.12.2008
ex 2933 99 9030Quizalofop-P-ethyl (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 99 9035Indoline0 %1.1.2007 — 31.12.2008
ex 2933 99 9040trans-4-Hydroxy-L-proline0 %1.1.2007 — 31.12.2008
ex 2933 99 9045Maleic hydrazide (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 99 9050Metconazole (ISO)3,2 %1.1.2007 — 31.12.2008
ex 2933 99 90555-Nitroindole0 %1.1.2007 — 31.12.2008
ex 2933 99 90601,3-Bis(3-isocyanatomethylphenyl)-1,3-diazetidine-2,4-dione (dimeric 2,4-toluene diisocyanate)0 %1.1.2007 — 31.12.2008
ex 2933 99 9065Candesartan cilexetil (INNM)0 %1.1.2007 — 31.12.2008
ex 2933 99 9069[(3R)-4-(4-chlorobenzyl)-7-fluoro-5-(methylsulphonyl)-1,2,3,4-tetrahydrocyclopenta[b]indole-3-yl]acetic acid0 %1.1.2007 — 31.12.2011
ex 2933 99 90706,7-Dihydro-5H-cyclopenta[b]pyridine0 %1.1.2007 — 31.12.2008
ex 2933 99 90752,3-Dichloropyrazine0 %1.1.2007 — 31.12.2008
ex 2933 99 90801-Methyltetrazole-5-thiol0 %1.1.2007 — 31.12.2008
ex 2933 99 9086Pyridaben (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 99 9087Pyridate (ISO)0 %1.1.2007 — 31.12.2008
ex 2933 99 90882,6-Dichloroquinoxaline0 %1.1.2007 — 31.12.2008
ex 2933 99 9089Carbendazim (ISO)0 %1.1.2007 — 31.12.2008
ex 2934 10 0010Hexythiazox (ISO)0 %1.1.2007 — 31.12.2008
ex 2934 10 00202-(4-Methylthiazol-5-yl)ethanol0 %1.1.2007 — 31.12.2008
ex 2934 10 00305-[(2,4-Dioxo-5-thiazolidinyl)methyl]-2-methoxy-N-{[4-(trifluoromethyl)phenyl] methyl}benzamide0 %1.1.2007 — 31.12.2008
ex 2934 20 80104-Chloro-1,3-benzothiazol-2(3H)-one0 %1.1.2007 — 31.12.2008
ex 2934 20 8020S-(1,3-Benzothiazol-2-yl) (Z)-2-(2-aminothiazol-4-yl)-2-(methoxyimino)thioacetate0 %1.1.2007 — 31.12.2008
ex 2934 20 8030Benthiavalicarb-isopropyl (ISO)0 %1.1.2007 — 31.12.2008
ex 2934 99 90107-Chloro-5-methyl-2H—1,4-benzothiazin-3-(4H)-one0 %1.1.2007 — 31.12.2008
ex 2934 99 9015Carboxin (ISO)0 %1.1.2007 — 31.12.2008
ex 2934 99 90204-[4-(Tridecyl[branched]oxy)phenyl]-1,4-thiazinane 1,1-dioxide0 %1.1.2007 — 31.12.2008
ex 2934 99 9025Oxycarboxin (ISO)0 %1.1.2007 — 31.12.2008
ex 2934 99 9030Etridiazole (ISO)0 %1.1.2007 — 31.12.2008
ex 2934 99 9035Dimethenamide (ISO)0 %1.1.2007 — 31.12.2008
ex 2934 99 90402,3,5,6-Tetrahydroxy-1,4-diisobutyl-1,4-dioxo-1,4-diphosphinane0 %1.1.2007 — 31.12.2008
ex 2934 99 9045Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione0 %1.1.2007 — 31.12.2008
ex 2934 99 90501-[2-(1,3-Dioxan-2-yl)ethyl]-2-ethylpyridinium bromide0 %1.1.2007 — 31.12.2008
ex 2934 99 9055Olmesartan medoxomil (INN)0 %1.1.2007 — 31.12.2008
ex 2934 99 9060DL-Homocysteine thiolactone hydrochloride0 %1.1.2007 — 31.12.2008
ex 2934 99 9065Methyl 3-aminothiophene-2-carboxylate0 %1.1.2007 — 31.12.2008
ex 2934 99 90721-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione0 %1.1.2007 — 31.12.2008
ex 2934 99 9073N-(5-Mercapto-1,3,4-thiadiazol-2-yl)acetamide0 %1.1.2007 — 31.12.2008
ex 2934 99 9075(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate0 %1.1.2007 — 31.12.2011
ex 2934 99 90762,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole)0 %1.1.2007 — 31.12.2011
ex 2934 99 9077Potassium 5-methyl-1,3,4-oxadiazole-2-carboxylate0 %1.1.2007 — 31.12.2011
ex 2934 99 9080Oblimersen sodium (INNM)0 %1.1.2007 — 31.12.2008
ex 2934 99 9085Aprepitant (INN)0 %1.1.2007 — 31.12.2008
ex 2935 00 9010Salts of sulfathiazole (INN)0 %1.1.2007 — 31.12.2008
ex 2935 00 9015Flupyrsulfuron-methyl-sodium (ISO)0 %1.1.2007 — 31.12.2008
ex 2935 00 9020Toluenesulfonamides0 %1.1.2007 — 31.12.2008
ex 2935 00 9025Triflusulfuron-methyl (ISO)0 %1.1.2007 — 31.12.2008
ex 2935 00 9030Mixture of isomers consisting of N-ethyltoluene-2-sulfonamide and N-ethyltoluene-4-sulfonamide0 %1.1.2007 — 31.12.2008
ex 2935 00 9035Chlorsulfuron (ISO)0 %1.1.2007 — 31.12.2008
ex 2935 00 90401-(4,6-Dimethoxypyrimidin-2-yl)-3-(2-ethylsulfonylimidazo[1,2-a]pyridin-3-ylsulfonyl)urea (sulfosulfuron)0 %1.1.2007 — 31.12.2008
ex 2935 00 9045Rimsulfuron (ISO)0 %1.1.2007 — 31.12.2008
ex 2935 00 90504,4'-Oxydi(benzenesulfonohydrazide)0 %1.1.2007 — 31.12.2008
ex 2935 00 9055Thifensulfuron-methyl (ISO)0 %1.1.2007 — 31.12.2008
ex 2935 00 90605-Amino-N-(2,6-dichloro-m-tolyl)-1H—1,2,4-triazole-3-sulfonamide0 %1.1.2007 — 31.12.2008
ex 2935 00 9065Tribenuron-methyl (ISO)0 %1.1.2007 — 31.12.2008
ex 2935 00 9070Methyl 3-aminosulfonylthiophene-2-carboxylate0 %1.1.2007 — 31.12.2008
ex 2935 00 9075Metsulfuron-methyl (ISO)0 %1.1.2007 — 31.12.2008
ex 2935 00 90764-Toluenesulphonyl urea0 %1.1.2007 — 31.12.2011
ex 2935 00 9080N-(3-Amino-2-hydroxy-4-phenylbutyl)-N-(2-methylpropyl)-4-aminobenzenesulfonamide0 %1.1.2007 — 31.12.2008
ex 2935 00 90814-Amino-N-(4-aminophenyl)benzenesulphonamide0 %1.1.2007 — 31.12.2008
ex 2935 00 9082N-(5,7-Dimethoxy[1,2,4]triazolo[1,5-a]pyrimidin-2-yl)-2-methoxy-4-(trifluoromethyl)pyridine-3-sulphonamide0 %1.1.2007 — 31.12.2008
ex 2935 00 9085N-[4-(Isopropylaminoacetyl)phenyl]methanesulfonamide hydrochloride0 %1.1.2007 — 31.12.2008
ex 2935 00 90864-(m-Tolylamino)pyridine-3-sulfonamide0 %1.1.2007 — 31.12.2008
ex 2935 00 90874'-Sulfamoylacetanilide0 %1.1.2007 — 31.12.2008
ex 2935 00 9088N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulfonamide sesquisulfate monohydrate0 %1.1.2007 — 31.12.2008
ex 2935 00 90893-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N, N-dimethyl-1,2,4-triazol-1-sulphonamide0 %1.1.2007 — 31.12.2011
ex 2938 90 9010Hesperidin0 %1.1.2007 — 31.12.2008
3201 20 00Wattle extract0 %1.1.2007 — 31.12.2008
ex 3201 90 9010Tanning extracts of eucalyptus3,2 %1.1.2007 — 31.12.2008
ex 3201 90 9020Tanning extracts derived from gambier and myrobalan fruits0 %1.1.2007 — 31.12.2008
ex 3204 13 0010C.I. Basic Red 1 dye0 %1.1.2007 — 31.12.2011
ex 3204 15 0010Dye C.I. Vat Orange 70 %1.1.2007 — 31.12.2008
ex 3204 15 0020Dye C.I. Vat Red 150 %1.1.2007 — 31.12.2008
ex 3204 15 0030Dye C.I. Vat Red 140 %1.1.2007 — 31.12.2008
ex 3204 15 0040Dye C.I. Vat Brown 570 %1.1.2007 — 31.12.2008
ex 3204 15 0050Dye C.I. Vat Blue 470 %1.1.2007 — 31.12.2008
ex 3204 15 0060Dyestuff C.I. Vat Blue 40 %1.1.2007 — 31.12.2008
ex 3204 17 0010Dye C.I. Pigment Yellow 810 %1.1.2007 — 31.12.2008
ex 3204 19 0010Nickel bis{4-methoxy-2-[6-(pentafluoroethylthio)benzothiazol-2-ylazo]-5-(dipropylamino)benzenesulfonate}0 %1.1.2007 — 31.12.2008
ex 3204 19 00154-{4-[3-(4-Methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1—f]chromen-3-yl]phenyl}morpholine0 %1.1.2007 — 31.12.2008
ex 3204 19 002013-Ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1—f]chromen-13-ol0 %1.1.2007 — 31.12.2008
ex 3204 19 0025Cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate0 %1.1.2007 — 31.12.2008
ex 3204 19 003013-Isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo [h]indeno[2,1—f]chromen-13-ol0 %1.1.2007 — 31.12.2008
ex 3204 19 003513-Butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo [h]indeno[2,1—f]chromene0 %1.1.2007 — 31.12.2008
ex 3204 19 0040Methyl 8'-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3'-naphtho[2,1—b][1,4]oxazine]-9'-carboxylate0 %1.1.2007 — 31.12.2008
ex 3204 19 00456,7-Dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1—f]chromene0 %1.1.2007 — 31.12.2008
ex 3204 19 0050Methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate0 %1.1.2007 — 31.12.2008
ex 3204 19 0060Ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate0 %1.1.2007 — 31.12.2008
ex 3204 19 00656-Methoxy-7-morpholino-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %1.1.2007 — 31.12.2008
ex 3204 19 0070Dye C.I. Solvent Red 490 %1.1.2007 — 31.12.2008
ex 3204 19 00756,7-Dimethoxy-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %1.1.2007 — 31.12.2008
ex 3204 19 0080((R) and (S) isomers of 6,7-Dimethoxy-13-ethyl-13-[2-(2-methoxyethoxy)-ethoxy]-3-(4-methoxyphenyl)-3-(4-fluorophenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %1.1.2007 — 31.12.2008
ex 3204 19 00816,11-Difluoro-3,3-di-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %1.1.2007 — 31.12.2008
ex 3204 19 00823-(4-Fluorophenyl)-3-(4-piperidinophenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %1.1.2007 — 31.12.2008
ex 3204 19 00836,7-Dimethoxy-11-cyano-3,3-di-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %1.1.2007 — 31.12.2008
ex 3205 00 0010Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry (1)0 %1.1.2007 — 31.12.2008
ex 3206 11 0010Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate0 %1.1.2007 — 31.12.2008
ex 3206 19 0010Preparation based on titanium dioxide, containing by weight 66 % or more but not more than 71 % of titanium dioxide and 1 % or more but not more than 2 % of isopropoxytitanium triisostearate0 %1.1.2007 — 31.12.2008
ex 3206 42 0010Lithopone0 %1.1.2007 — 31.12.2008
ex 3206 49 8010Black preparation of iron-oxide pigments, in liquid form, with a maximum particle size not exceeding 20 nanometres and containing by weight 25 % or more of iron evaluated as Fe2O3, for the manufacture of goods of heading No 3304 or 9608 (1)0 %1.1.2007 — 31.12.2008
3206 50 00Inorganic products of a kind used as luminophores0 %1.1.2007 — 31.12.2008
ex 3207 30 0010Preparation containing :

—not more than 85 % by weight of silver,

—not less than 2 % by weight of palladium,

—barium titanate,

—terpineol, and

—ethyl cellulose,

used for screen printing in the manufacture of multilayer ceramic capacitors (1)
0 %1.1.2007 — 31.12.2008
ex 3207 40 8020Glass flakes coated with silver, of an average diameter of 40 (± 10) μm0 %1.1.2007 — 31.12.2008
ex 3207 40 8030Glass frit, for use in the manufacture of cathode-ray tubes (1)0 %1.1.2007 — 31.12.2008
ex 3208 10 9010Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer0 %1.1.2007 — 31.12.2008
ex 3707 90 9060
ex 3208 20 1010Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer0 %1.1.2007 — 31.12.2008
ex 3208 20 1020Copolymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, partially quaternized by diethyl sulfate, in the form of a solution in ethanol0 %1.1.2007 — 31.12.2008
ex 3905 91 0092
ex 3208 20 1030Solution of diundecyl phthalate and a copolymer of dibutyl maleate and isobutyl methacrylate in a hydrocarbon solvent0 %1.1.2007 — 31.12.2008
ex 3208 20 1040Poly(1H,1H-heptafluorobutyl methacrylate) dissolved in a mixture of methyl perfluorobutyl ether and methyl perfluoroisobutyl ether0 %1.1.2007 — 31.12.2011
ex 3208 90 1910Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol0 %1.1.2007 — 31.12.2008
ex 3911 90 9935
ex 3208 90 1915Modified, chlorinated polyolefins, whether or not in a solution or dispersion0 %1.1.2007 — 31.12.2008
ex 3902 90 9094
ex 3208 90 1920Copolymer of polyurethane and silicone, in the form of a solution in a mixture of butanone, toluene and cyclohexanone, containing by weight 13 % or more but not more than 16 % of copolymer0 %1.1.2007 — 31.12.2008
ex 3208 90 1930Solution containing:

—(30 ± 5) % by weight of polyamide resin,

—(6,5 ± 3,5) % by weight of diazonaphthoquinone,

—(55 ± 5) % by weight of 1-methyl-2-pyrrolidone,

—1 000 μg/kg or less of chloride,

—1 000 μg/kg or less of potassium and

—1 000 μg/kg or less of iron
0 %1.1.2007 — 31.12.2008
ex 3208 90 1940Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane0 %1.1.2007 — 31.12.2008
ex 3208 90 1950Solution containing by weight:

—(65 ± 10) % of γ-butyrolactone,

—(30 ± 10) % of polyamide resin,

—(3,5 ± 1,5) % of naphthoquinone ester derivative and

—(1,5 ± 0,5) % of arylsilicic acid
0 %1.1.2007 — 31.12.2008
ex 3208 90 1960Copolymer of hydroxystyrene and either styrene or alkoxystyrene or both, dissolved in ethyl lactate0 %1.1.2007 — 31.12.2011
ex 3208 90 1985Mixture containing by weight :

—30~45 % Polyamide resin;

—2~10 % Diazonaphthoquinone;

—50~65 % γ-Butyrolactone.
0 %1.1.2007 — 31.12.2008
ex 3208 90 9910Solution based on chemically modified natural polymers, containing two or more of the following dyes:

—methyl 8'-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3'-naphtho[2,1—b][1,4]oxazine]-9'-carboxylate,

—methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

—13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1—f]chromen-13-ol,

—ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

—13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1—f]chromen-13-ol
0 %1.1.2007 — 31.12.2008
ex 3208 90 9920Solution based on chemically modified natural polymers, containing two or more of the following dyes:

—4-[4-(13,13-dimethyl-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1—f]chromen-3-yl)phenyl]morpholine,

—4-{4-[3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1—f]chromen-3-yl]phenyl}morpholine,

—cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

—ethoxycarbonylmethyl 6-acetoxy-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

—2-pentyl-7,7-diphenylbenzo[h]chromeno[6,5—d]-1,3-dioxin-4(7H)-one,

—13-butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo [h]indeno[2,1—f]chromene,

—3-(4-methoxyphenyl)-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1—f]chromene,

—6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1—f]chromene
0 %1.1.2007 — 31.12.2008
ex 3215 11 0010Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments0 %1.1.2007 — 31.12.2008
ex 3215 19 0010
ex 3215 90 8010Ink formulation, for use in the manufacture of ink-jet cartridges (1)0 %1.1.2007 — 31.12.2008
ex 3215 90 8020Heat sensitive ink fixed on a plastic film0 %1.1.2007 — 31.12.2008
ex 3215 90 8030Ink preparation, in the form of powder, for use in the manufacture of ink-filled bottles of a kind used in colour digital presses of heading No 8443 (1)0 %1.1.2007 — 31.12.2008
3301 12 10Essential oil of orange, not deterpenated0 %1.1.2007 — 31.12.2008
ex 3402 11 9010Surfactant mixture, of disodium salts of dodecyl (sulphophenoxy)benzenesulphonic acid and oxybis (dodecylbenzenesulphonic acid)0 %1.1.2007 — 31.12.2008
ex 3402 13 0010Vinyl copolymer surface active agent based on polypropylene glycol0 %1.1.2007 — 31.12.2008
ex 3402 90 1020Mixture of docusate sodium (INN) and sodium benzoate0 %1.1.2007 — 31.12.2008
ex 3402 90 1030Non-aqueous surface-active preparation, containing:

—polyethylene glycol alkylphenyl ether,

—2,4,7,9-tetramethyldec-5-yne-4,7-diol and

—phosphoric acid esters
0 %1.1.2007 — 31.12.2008
ex 3402 90 1040Amphoteric fluorinated surfactant in a mixture of water and ethanol, containing by weight 25 % or more but not more than 30 % surfactant.0 %1.1.2007 — 31.12.2008
ex 3402 90 9010Crystalline powder obtained by the reaction of trisodium phosphate with a mixture of sodium hypochlorite and sodium chloride (“chlorinated trisodium phosphate”), containing by weight:

—3,5 % or more of available chlorine, measured iodometrically and

—17,0 % or more of phosphorus evaluated as P2O5
0 %1.1.2007 — 31.12.2008
ex 3403 99 9010Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides0 %1.1.2007 — 31.12.2008
ex 3504 00 0010Purified antigens obtained from genetically manipulated yeast cells, for the manufacture of detection tests for hepatitis-C (1)0 %1.1.2007 — 31.12.2008
ex 3504 00 0020Glycoprotein 160 obtained from Human Immunodeficiency Virus, HIV-1 strain0 %1.1.2007 — 31.12.2008
ex 3505 10 5020O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch0 %1.1.2007 — 31.12.2008
ex 3506 10 0011Cartridge containing an adhesive based on a mixture of silicon modified polymer and aluminium hydroxide for use in the manufacture of deflection yokes (1)0 %1.1.2007 — 31.12.2008
ex 3506 91 0010Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)0 %1.1.2007 — 31.12.2008
ex 3506 91 0020Heat-activated adhesive based on phenolic resin and rubber, in the form of a film on a release paper, for use in the manufacture of brake pads for the automotive industry (1)0 %1.1.2007 — 31.12.2008
ex 3506 91 0030Two component microencapsulated epoxy adhesive dispersed in a solvent0 %1.1.2007 — 31.12.2008
ex 3507 90 9010Asparaginase0 %1.1.2007 — 31.12.2008
ex 3507 90 9020Enzymatic preparation based on thermolysine0 %1.1.2007 — 31.12.2008
ex 3507 90 9040Avian myeloblastosis virus (AMV) reverse transcriptase0 %1.1.2007 — 31.12.2008
ex 3507 90 9060Trypsin certified to be produced in compliance with EC Good Manufacturing Practice (cGMP) and having a specific enzyme activity of 0,45 μkat/mg or more, for the manufacture of goods of heading No 3004 (1)0 %1.1.2007 — 31.12.2008
ex 3507 90 9070Chymotrypsin0 %1.1.2007 — 31.12.2008
ex 3701 30 0010Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not exceeding 0,8 mm, not covered with a release film, of a total thickness not exceeding 1 mm0 %1.1.2007 — 31.12.2008
ex 3701 99 0010Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, for the manufacture of masks for the goods of heading No 8541 or 8542 (1)0 %1.1.2007 — 31.12.2008
ex 3702 31 9810Colour negative film, for the manufacture of instant-picture film-packs (1)0 %1.1.2007 — 31.12.2008
ex 3702 43 0010Photographic film, of a nominal width of 459, 669 or 761 mm, composed of several layers, including two polyester films, a carbon layer, an adhesive layer, whether or not with a layer of a copolymer of styrene with acrylonitrile0 %1.1.2007 — 31.12.2008
ex 3702 44 0010
ex 3703 90 1010Paper sheet, coated with silver halide emulsion, for the manufacture of goods of subheading 3701 20 00 (1)0 %1.1.2007 — 31.12.2008
ex 3707 10 0010Photosensitive emulsion for the sensitization of silicon discs (1)0 %1.1.2007 — 31.12.2008
ex 3707 10 0015Sensitising emulsion, consisting of diazooxonaphtalenesulphonic acid ester and phenolic resins, containing by weight not more than 12 % of diazooxonaphtalenesulfonic acid ester, in 2-methoxy-1-methylethyl acetate or ethyl lactate0 %1.1.2007 — 31.12.2008
ex 3707 10 0020Sensitising emulsion, consisting of diazooxonaphthalenesulfonic acid ester and phenolic resins, containing by weight not more than 6 % of diazooxonaphthalenesulfonic acid ester, in 2-methoxy-1-methylethyl acetate0 %1.1.2007 — 31.12.2008
ex 3707 10 0025Sensitising emulsion containing:

—phenolic or acrylic resins

—a maximum 2 % by weight of light sensitive acid precursor,

in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate
0 %1.1.2007 — 31.12.2008
ex 3707 10 0030Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate0 %1.1.2007 — 31.12.2008
ex 3707 10 0035Sensitising emulsion, consisting of acrylate and/or methacrylate polymers, containing by weight not more than 7 % photosensitive acid precursors dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate0 %1.1.2007 — 31.12.2011
ex 3707 90 3010Toner, in the form of powder, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines or computer printers (1)0 %1.1.2007 — 31.12.2008
ex 3707 90 3020Toner, based on a polyol resin, in the form of powder0 %1.1.2007 — 31.12.2008
ex 3707 90 3030Two-component toner, liquid, in the form of a set consisting of a container containing a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments, and a container containing isoparaffins0 %1.1.2007 — 31.12.2008
ex 3707 90 3040Polyester resin based toner, manufactured by a polymerisation process, for use as a developer in the manufacture of computer printer and copier cartridges (1)0 %1.1.2007 — 31.12.2008
ex 3707 90 9010Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in the form of a solution in 2-methoxy-1-methylethyl acetate and 1-methoxypropan-2-ol0 %1.1.2007 — 31.12.2008
ex 3707 90 9020Anti-reflection coating, consisting of a copolymer of hydroxystyrene and methyl methacrylate, modified with chromophore groups, containing by weight not more than 10 % of polymer, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate0 %1.1.2007 — 31.12.2008
ex 3707 90 9030Anti-reflection coating, in the form of an aqueous solution, containing by weight:

—not more than 2 % of perhalogenated sulfonic acid derivatives,

—not more than 1 % of a vinyl polymer
0 %1.1.2007 — 31.12.2008
ex 3824 90 9891
ex 3707 90 9040Anti-reflection coating, consisting of amino-resin and modified phenolic resin, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate, containing by weight 15 % or more but not more than 24 % of both polymers taken together0 %1.1.2007 — 31.12.2008
ex 3707 90 9050Anti-reflection coating, containing by weight:

—30 % or more but not more than 40 % of cyclohexanone,

—30 % or more but not more than 40 % of 1-methyl-2-pyrrolidone,

—20 % or more but not more than 30 % of tetrahydrofurfuryl alcohol
0 %1.1.2007 — 31.12.2008
ex 3801 20 9010Colloidal graphite in suspension in water, for use as internal coating in colour cathode-ray tubes (1)0 %1.1.2007 — 31.12.2008
3805 90 10Pine oil1,7 %1.1.2007 — 31.12.2008
ex 3808 91 9010Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide0 %1.1.2007 — 31.12.2008
ex 3808 91 9020Preparation containing by weight 2 % or more but not more than 4 % of azadirachtin (ISO), not put up for retail sale0 %1.1.2007 — 31.12.2008
ex 3808 91 9030Preparation containing endospores and protein crystals derived from the hybrid strain GC 91 of Bacillus thuringiensis Berliner subsp. aizawai and kurstaki0 %1.1.2007 — 31.12.2008
ex 3808 91 9040Spinosad (ISO)0 %1.1.2007 — 31.12.2008
ex 3808 92 9010Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale0 %1.1.2007 — 31.12.2008
ex 3808 92 9020Preparation based on diiodomethyl p-tolyl sulfone, not put up for retail sale0 %1.1.2007 — 31.12.2008
ex 3808 92 9030Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight 24 % or more but not more than 26 % of pyrithione zinc (INN)0 %1.1.2007 — 31.12.2008
ex 3808 94 2010Preparation containing by weight:

—58 % or more but not more than 62 % of 1-bromo-3-chloro-5,5-dimethylhydantoin,

—26 % or more but not more than 29 % of 1,3-dichloro-5,5-dimethylhydantoin,

—10 % or more but not more than 12 % of 1,3-dichloro-5-ethyl-5-methylhydantoin,

for the manufacture of swimming-pool disinfectants (1)
0 %1.1.2007 — 31.12.2008
ex 3808 94 90101-Dodecylguanidine hydrochloride, in the form of a solution in isopropanol and water, containing by weight 40 % or less of 1-dodecylguanidine hydrochloride0 %1.1.2007 — 31.12.2008
ex 3809 91 0010Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl) methylphosphonate0 %1.1.2007 — 31.12.2008
ex 3809 92 0010Paper anti-fading agent, consisting of a mixture of magnesium trisilicate and monosodium salt of 2,2'-methylenebis(4,6-di-tert-butylphenyl) phosphate0 %1.1.2007 — 31.12.2008
ex 3811 21 0010Salts of dinonylnaphthalenesulfonic acid, in the form of a solution in mineral oils0 %1.1.2007 — 31.12.2008
ex 3811 21 0020Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil0 %1.1.2007 — 31.12.2008
ex 3811 90 0010Dinonylnaphthylsulphonic acid salt, in a mineral oil solution0 %1.1.2007 — 31.12.2008
ex 3811 90 0020Corrosion inhibitor, containing reaction products of fatty acids and tall oil with formaldehyde and (Z)-N-9-octadecenyl-1,3-propanediamine0 %1.1.2007 — 31.12.2011
ex 3812 30 8020Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate0 %1.1.2007 — 31.12.2008
ex 3812 30 8030Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol0 %1.1.2007 — 31.12.2008
ex 3814 00 9010Mixture containing by weight 25 % or more but not more than 35 % of dimethyl sulfoxide and 65 % or more but not more than 75 % of monoethanolamine3 %1.1.2007 — 31.12.2008
ex 3814 00 9020Mixture containing by weight:

—69 % or more but not more than 71 % of 1-methoxypropan-2-ol,

—29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate
0 %1.1.2007 — 31.12.2008
ex 3814 00 9030Azeotrope mixture containing by weight 30 % or more but not more than 50 % of trans-dichloroethylene and a mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether0 %1.1.2007 — 31.12.2008
ex 3814 00 9040Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether0 %1.1.2007 — 31.12.2008
ex 3815 12 0010Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not exceeding 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver0 %1.1.2007 — 31.12.2008
ex 3815 12 0020Catalyst, consisting of palladium and rhenium, fixed on a support of active carbon, in the form of powder, containing:

—0,5 % or more but not more than 1,5 % by weight of palladium,

—3 % or more but not more than 5 % by weight of rhenium and

—0,1 mole % or more but not more than 1 mole % of alkaline metals,

for use in the manufacture of tetrahydrofuran (1)
0 %1.1.2007 — 31.12.2008
ex 3815 12 0030Catalyst, consisting of platinum and palladium fixed on a support, containing by weight:

—not more than 1,5 % of platinum,

—not more than 1,5 % of palladium and

—not more than 0,1 % of alkali metals,

for use in hydrogenation of white oils (1)
0 %1.1.2007 — 31.12.2008
ex 3815 19 9010Catalyst, consisting of chromium trioxide or dichromium trioxide fixed on a support of silicon dioxide, of a pore volume, as determined by the nitrogen absorption method, of 2 cm3/g or more0 %1.1.2007 — 31.12.2008
ex 3815 19 9015Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile (1)0 %1.1.2007 — 31.12.2008
ex 3815 19 9020Catalyst consisting of chromium oxides and titanium dioxide fixed on a support of silicon dioxide, aluminium oxide or aluminium phosphate0 %1.1.2007 — 31.12.2008
ex 3815 19 9030Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene (1)0 %1.1.2007 — 31.12.2008
ex 3815 19 9035Catalyst, in the form of rodlets of a length of 5,5 mm or more but not exceeding 6,5 mm, consisting of copper oxide and zinc oxide fixed on a support of aluminium oxide, containing by weight:

—55 % or more but not more than 60 % of copper oxide and

—30 % or more but not more than 35 % of zinc oxide
0 %1.1.2007 — 31.12.2008
ex 3815 19 9040Catalyst, in the form of spheres of a diameter of 4,2 mm or more but not exceeding 9 mm, consisting of a mixture of metals oxides containing predominantly oxides of molybdenum, vanadium and copper, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid (1)0 %1.1.2007 — 31.12.2008
ex 3815 19 9045Catalyst, consisting predominantly of dichromium copper tetraoxide and copper (II) oxide, containing by weight 38 % or more but not more than 48 % of copper, evaluated as copper (II) oxide, fixed on a support of silicon dioxide, for the hydrogenation of acetophenones (1)0 %1.1.2007 — 31.12.2008
ex 3815 19 9050Catalyst consisting of organo-metallic compounds of titanium, magnesium and aluminium on a support of silicon dioxide, in the form of a suspension in tetrahydrofuran0 %1.1.2007 — 31.12.2008
ex 3815 19 9055Catalyst consisting of a mixture of metal oxides containing chromium trioxide, fixed on a support of silicon dioxide0 %1.1.2007 — 31.12.2008
ex 3815 19 9060Catalyst consisting of dichromium trioxide, fixed on a support of aluminium oxide0 %1.1.2007 — 31.12.2008
ex 3815 19 9065Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide0 %1.1.2007 — 31.12.2008
ex 3815 19 9070Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide0 %1.1.2007 — 31.12.2008
ex 3815 19 9075Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide0 %1.1.2007 — 31.12.2008
ex 3815 19 9080Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil0 %1.1.2007 — 31.12.2008
ex 3815 19 9085Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder0 %1.1.2007 — 31.12.2008
ex 3815 19 9086Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins (1)0 %1.1.2007 — 31.12.2008
ex 3815 90 9015Catalyst, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, vanadium, nickel and antimony, whether or not mixed with porcelain balls, for use in the manufacture of acrylic acid (1)0 %1.1.2007 — 31.12.2008
ex 3815 90 9016Initiator based on dimethylaminopropyl urea for the manufacture of polyurethane foam systems (1)0 %1.1.2007 — 31.12.2008
ex 3815 90 9020Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight:

—20 % or more but not more than 30 % of titanium and

—55 % or more but not more than 72 % of chlorine
0 %1.1.2007 — 31.12.2008
ex 3815 90 9025Catalyst, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, bismuth, nickel, iron and silicon, whether or not mixed with porcelain balls, for use in the manufacture of acrylaldehyde (1)0 %1.1.2007 — 31.12.2008
ex 3815 90 9030Catalyst, in the form of a powder, containing by weight 82 % or more of copper and of a specific surface of 0,5 m2/g or more but not exceeding 8 m2/g0 %1.1.2007 — 31.12.2008
ex 3815 90 9035Catalyst, in the form of a suspension in oil, consisting of titanium trichloride and aluminium trichloride, containing by weight (on an oil-free basis):

—15 % or more but not more than 30 % of titanium and

—40 % or more but not more than 72 % of chlorine
0 %1.1.2007 — 31.12.2008
ex 3815 90 9040Catalyst, in the form of rodlets of a length of 5 mm or more but not exceeding 8 mm, consisting of a mixture of metals oxides containing predominantly oxides of iron, molybdenum and bismuth, whether or not containing silicon dioxide as filler, for use in the manufacture of acrylic acid (1)0 %1.1.2007 — 31.12.2008
ex 3815 90 9050Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium0 %1.1.2007 — 31.12.2008
ex 3815 90 9060Catalyst, in the form of rodlets, consisting of an acid aluminosilicate (zeolite):

—with a mole-ratio of silicon dioxide: dialuminium trioxide of not less than 500: 1 and

—containing by weight 0,2 % or more but not more than 0,8 % of platinum
0 %1.1.2007 — 31.12.2008
ex 3815 90 9065Catalyst based on a mordenite zeolite, in the form of granules, for use in the manufacture of mixtures of methylamines containing by weight 50 % or more of dimethylamine (1)0 %1.1.2007 — 31.12.2008
ex 3815 90 9070Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols0 %1.1.2007 — 31.12.2008
ex 3815 90 9075Catalyst, consisting of a mixture of 1,4-diazabicyclo[2.2.2]octane, 2-hydroxyethyliminodi(acetic acid) and dibutyltin di(acetate), containing by weight 5 % or more but not more than 10 % of 1,4-diazabicyclo[2.2.2]octane0 %1.1.2007 — 31.12.2008
ex 3815 90 9080Catalyst consisting predominantly of dinonylnaphthalenedisulfonic acid in the form of a solution in isobutanol0 %1.1.2007 — 31.12.2008
ex 3815 90 9081Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate0 %1.1.2007 — 31.12.2008
ex 3815 90 9082Catalyst, containing by weight 35 % or more but not more than 55 % of (2-hydroxy-1-methylethyl)trimethylammonium formate and formic acid0 %1.1.2007 — 31.12.2008
ex 3815 90 9083Catalyst, in the form of powder, containing aluminium magnesium hydroxide hydrate, rare-earth metals oxides and divanadium pentaoxide0 %1.1.2007 — 31.12.2008
ex 3815 90 9084Powder catalyst containing by weight a minimum 96 % of oxides of copper, chromium and iron0 %1.1.2007 — 31.12.2008
ex 3815 90 9085Catalyst based on aluminosilicate (zeolite), for the transalkylation of alkylaromatic hydrocarbons or the oligomerization of olefins (1)0 %1.1.2007 — 31.12.2008
ex 3815 90 9086Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metals oxides and less than 1 % of disodium oxide0 %1.1.2007 — 31.12.2008
ex 3815 90 9087Reaction initiator, consisting of diisopropyl peroxydicarbonate, in the form of a solution in diallyl 2,2'-oxydiethyl dicarbonate0 %1.1.2007 — 31.12.2008
ex 3815 90 9088Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis :

—4 % or more but not more than 10 % of titanium and

—10 % or more but not more than 20 % magnesium
0 %1.1.2007 — 31.12.2008
ex 3815 90 9089Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1)0 %1.1.2007 — 31.12.2011
ex 3817 00 8010Mixture of alkylnaphthalenes, containing by weight:

—88 % or more but not more than 98 % of hexadecylnaphthalene

—2 % or more but not more than 12 % of dihexadecylnaphthalene
0 %1.1.2007 — 31.12.2008
ex 3819 00 0020Fire resistant hydraulic fluid based on phosphate ester0 %1.1.2007 — 31.12.2008
ex 3823 19 1091Mixture of fatty acids containing by weight:

—2 % or more but not more than 6 % of hexanoic acid,

—53 % or more but not more than 60 % of octanoic acid,

—34 % or more but not more than 42 % of decanoic acid and

—not more than 2 % of dodecanoic acid
0 %1.1.2007 — 31.12.2008
ex 3824 90 1510Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets0 %1.1.2007 — 31.12.2008
ex 3824 90 6401Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora purpurea, whether or not dried0 %1.1.2007 — 31.12.2008
ex 3824 90 6402Cholic acid and 3α,12α-dihydroxy-5β-cholan-24-oic acid (deoxycholic acid), crude0 %1.1.2007 — 31.12.2008
ex 3824 90 6403Products obtained by the N-ethylation of sisomycin (INN)0 %1.1.2007 — 31.12.2008
ex 3824 90 6404Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora inyoensis, whether or not dried0 %1.1.2007 — 31.12.2008
ex 3824 90 6405Residues of manufacture containing by weight 40 % or more of 11β,17,20,21-tetrahydroxy-6-methylpregna-1,4-dien-3-one 21-acetate0 %1.1.2007 — 31.12.2008
ex 3824 90 6406Mixture of inosine (INN), dimepranol (INN) and acedoben (INN)0 %1.1.2007 — 31.12.2008
ex 3824 90 9801Colloidal diantimony pentaoxide0 %1.1.2007 — 31.12.2008
ex 3824 90 9802Mixture of nitromethane and 1,2-epoxybutane0 %1.1.2007 — 31.12.2008
ex 3824 90 9803Grains or granules, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight:

—70 % or more but not more than 78 % of dialuminium trioxide and

—19 % or more but not more than 26 % of zirconium dioxide
5,2 %1.1.2007 — 31.12.2008
ex 3824 90 9804Crude lithium hypochlorite0 %1.1.2007 — 31.12.2008
ex 3824 90 9805Polysilicate, modified with phosphoric acid, in the form of a solution in a mixture of ethanol, isopropanol and tetrahydrofuran, containing by weight 3 % or more but not more than 6 % of polysilicate0 %1.1.2007 — 31.12.2008
ex 3824 90 9806Preparation in the form:

—of powder, containing by weight 75 % or more of zinc bis[3,5-bis(1-phenylethyl)salicylate] or

—of aqueous dispersion, containing by weight 22 % or more but not more than 55 % of zinc bis[3,5-bis(1-phenylethyl)salicylate]
0 %1.1.2007 — 31.12.2008
ex 3824 90 9807Film consisting of the oxides of either barium or calcium and either titanium or zirconium, mixed with binding materials0 %1.1.2007 — 31.12.2008
ex 3824 90 9808Preparation consisting essentially of alkaline asphalt sulfonate, of:

—a specific gravity of 0,9 or more but not exceeding 1,5 and

—a solubility in water of 70 % by weight or more
0 %1.1.2007 — 31.12.2008
ex 3824 90 9809Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulfonic acid, either:

—on a support of mineral wax, whether or not modified chemically, or

—in the form of a solution in an organic solvent
0 %1.1.2007 — 31.12.2008
ex 3824 90 9810Calcined bauxite (refractory grade)0 %1.1.2007 — 31.12.2008
ex 3824 90 9811Magnetisable iron oxide, in the form of powder, containing by weight:

—30 % or more but not more than 38 % of bivalent iron in relation to the total iron and

—1 % or more but not more than 4 % of cobalt
0 %1.1.2007 — 31.12.2008
ex 3824 90 9812Oligomer of tetrafluoroethylene, having one iodoethyl end-group0 %1.1.2007 — 31.12.2008
ex 3824 90 9813Preparations containing not less than 92 % but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate0 %1.1.2007 — 31.12.2011
ex 3824 90 9814Calcium phosphonate phenate, dissolved in mineral oil0 %1.1.2007 — 31.12.2011
ex 3824 90 9815Mixture of disodium N-benzyloxycarbonyl-L-aspartate and sodium chloride, in the form of a solution in water0 %1.1.2007 — 31.12.2008
ex 3824 90 9816Disodium 9,10-dihydro-9,10-dioxoanthracene-2,7-disulfonate, containing by weight 10 % or more but not more than 20 % of sodium sulfate0 %1.1.2007 — 31.12.2008
ex 3824 90 9817Eutectic alloy wholly of potassium and sodium, containing by weight 77 % or more but not more than 79 % of potassium0 %1.1.2007 — 31.12.2008
ex 3824 90 98184-Methylmandelic acid, crude0 %1.1.2007 — 31.12.2011
ex 3824 90 9820Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:

—either an aluminium-alkyl compound,

—or an organic complex of tungsten

—or an organic complex of molybdenum
0 %1.1.2007 — 31.12.2008
ex 3824 90 9821Mixture of tris[2-chloro-1-(chloromethyl)ethyl] phosphate and oligomers of methylphosphonic acid and phosphoric acid with ethane-1,2-diol0 %1.1.2007 — 31.12.2008
ex 3824 90 9822Preparations containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol0 %1.1.2007 — 31.12.2011
ex 3824 90 9823Mixture of sucrose esters, derived from the esterification of sucrose with industrial stearic acid0 %1.1.2007 — 31.12.2008
ex 3824 90 9824Preparations consisting predominantly of phosphabicyclononanes and P-alkyl derivatives thereof, in the form of a solution in 4-tert-butyltoluene0 %1.1.2007 — 31.12.2008
ex 3824 90 9825Lithium tantalate wafers, undoped0 %1.1.2007 — 31.12.2008
ex 3824 90 9827Preparation based on: 2-pentanone, 4-methyl-O, O',O''-(methylsilylidyne)trioxime and 4-methyl-2-butanone-O, O',O'' ,O'''-silane tetrayl tetraoxime0 %1.1.2007 — 31.12.2008
ex 3824 90 9828Preparation consisting predominantly of ethylene glycol and N, N-dimethylformamide or ethylene glycol and γ-butyrolactone, for the manufacture of electrolytic capacitors (1)0 %1.1.2007 — 31.12.2008
ex 3824 90 9829Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors (1)0 %1.1.2007 — 31.12.2008
ex 3824 90 98302,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated0 %1.1.2007 — 31.12.2008
ex 3824 90 9831Copper zinc ferrite, coated with a silicone resin, in the form of granules of a size not exceeding 120 μm0 %1.1.2007 — 31.12.2008
ex 3824 90 9832Styrene oligomer0 %1.1.2007 — 31.12.2008
ex 3824 90 9833Preparation consisting of α-(4-allyloxycarbonylbenzoyl)-ω-allyloxypoly[oxy(2-methylethylene)oxyterephthaloyl] and either diallyl-2,2'-oxydiethyl dicarbonate or diallyl isophthalate0 %1.1.2007 — 31.12.2008
ex 3824 90 9834Mixture of phytosterols in the form of a crystalline waxy powder, containing by weight:

—36 % or more, but not more than 79 % of sitosterols,

—15 % or more, but not more than 34 % of sitostanols,

—4 % or more, but not more than 25 % of campesterols,

—0 % or more, but not more than 14 % of campestanols
0 %1.1.2007 — 31.12.2008
ex 3824 90 9835Nitrosylsulfuric acid of a purity by weight of 70 % or more but not exceeding 73 %0 %1.1.2007 — 31.12.2008
ex 3824 90 9839Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid0 %1.1.2007 — 31.12.2008
ex 3824 90 9840Azelaic acid of a purity by weight of 75 % or more but not exceeding 85 %0 %1.1.2007 — 31.12.2008
ex 3824 90 9842Mixed metals oxides, in the form of powder, containing by weight:

—either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,

—or 30 % or more of lead and 5 % or more of niobium,

for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors (1)
0 %1.1.2007 — 31.12.2008
ex 3824 90 98437-Aminonaphthalene-1,3,6-trisulfonic acid and its salts, of a purity by weight of 65 % or more0 %1.1.2007 — 31.12.2008
ex 3824 90 9845Preparations consisting predominantly of ethylene glycol and:

—either diethylene glycol, dodecandioic acid and ammonia water,

—or silicon oxide,

—or ammonium hydrogen azelate,

—or ammonium hydrogen azelate and silicon oxide,

—or dodecandioic acid, ammonia water and silicon oxide,

for the manufacture of electrolytic capacitors (1)
0 %1.1.2007 — 31.12.2008
ex 3824 90 9846Carboxylic acid anhydride based hardener for epoxyde resin, in liquid form, of a specific weight at 25 oC of 1,15 g/cm3 or more but not exceeding 1,18 g/cm30 %1.1.2007 — 31.12.2008
ex 3824 90 9849Mixed oxides of metals, in the form of powder, containing by weight:

—70 % or more but not more than 75 % of iron oxide,

—10 % or more but not more than 20 % of zinc oxide,

—10 % or more but not more than 15 % of magnesium oxide,

—1 % or more but not more than 5 % of manganese oxide and

—1 % or more but not more than 3 % of copper oxide
0 %1.1.2007 — 31.12.2008
ex 3824 90 9850Zeolites consisting of oxides of barium, aluminium and silicon, containing by weight 30 % or more but not more than 40 % of barium oxide, in the form of spheres of which 80 % or more by weight have a diameter of 0,3 mm or more but not more than 1,2 mm0 %1.1.2007 — 31.12.2008
ex 3824 90 98542-Hydroxybenzonitrile, in the form of a solution in N, N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile0 %1.1.2007 — 31.12.2008
ex 3824 90 9855Mixture containing by weight 75 % or more of pentaerythritol triallyl ether0 %1.1.2007 — 31.12.2008
ex 3824 90 9857Mixture of trialkylphosphine oxides0 %1.1.2007 — 31.12.2008
ex 3824 90 9858Platinum oxide fixed on a porous support of aluminium oxide, containing by weight 0,1 % or more but not more than 1 % of platinum and 0,5 % or more but not more than 5 % of ethylaluminium dichloride0 %1.1.2007 — 31.12.2008
ex 3824 90 9860α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]0 %1.1.2007 — 31.12.2008
ex 3824 90 9861Mixture of metal oxides, in the form of powder, containing by weight:

—20 % or more of barium,

—10 % or more of titanium and

—4 % or more of lead or 3 % or more of niobium or 0,7 % or more of zirconium,

for use as dielectric material in the manufacture of multilayer ceramic capacitors (1)
0 %1.1.2007 — 31.12.2008
ex 3824 90 9863Triethylborane, in the form of a solution in tetrahydrofuran0 %1.1.2007 — 31.12.2008
ex 3824 90 9864Aluminium sodium silicate, in the form of spheres of a diameter of:

—either 1,6 mm or more but not exceeding 3,4 mm,

—or 4 mm or more but not exceeding 6 mm
0 %1.1.2007 — 31.12.2008
ex 3824 90 9865Mixture of tris(alkoxycarbonylamino)-1,3,5-triazines in which alkoxy groups are methoxy and butoxy0 %1.1.2007 — 31.12.2008
ex 3824 90 9866Mixture of primary tert-alkylamines0 %1.1.2007 — 31.12.2008
ex 3824 90 9867Preparation consisting of indium tin oxide dispersed in organic solvents0 %1.1.2007 — 31.12.2008
ex 3824 90 9872Solution containing by weight 80 % or more of 2,4,6-trimethylbenzaldehyde in acetone0 %1.1.2007 — 31.12.2008
ex 3824 90 9873Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)0 %1.1.2007 — 31.12.2008
ex 3824 90 9877Diethylmethoxyborane, in the form of a solution in tetrahydrofuran0 %1.1.2007 — 31.12.2008
ex 3824 90 9880Preparation containing by weight 81 % or more but not more than 89 % bis (3,4-epoxy-cyclohexylmethyl)-adipate0 %1.1.2007 — 31.12.2008
ex 3824 90 9881Calcium oxide stabilised zirconia in the form of lumps of which 94 % or more by weight is retained on a 16 mm sieve, containing by weight:

—92 % or more of zirconium dioxide and

—2 % or more but not more than 6 % of calcium oxide
0 %1.1.2007 — 31.12.2008
ex 3824 90 9882α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]0 %1.1.2007 — 31.12.2008
ex 3907 40 0020
ex 3824 90 9883Mixture containing:

—unsaturated, dimerised fatty acids, hydrogenated and polymerized with ethylenediamine and octadecan-1-ol,

—white oil,

—2-methylpentane-2,4-diol and

—glycerides of decanoic and octanoic acids
0 %1.1.2007 — 31.12.2008
ex 3824 90 9884Reaction product, containing by weight:

—1 % or more but not more than 40 % of molybdenum oxide,

—10 % or more but not more than 50 % of nickel oxide,

—30 % or more but not more than 70 % of tungsten oxide
0 %1.1.2007 — 31.12.2008
ex 3824 90 9885Particles of magnesium sodium silicate on which are ionically bonded chiral complexes of tris(1,10-phenanthroline)ruthenium, for use in the manufacture of high performance liquid chromatography columns (HPLC) (1)0 %1.1.2007 — 31.12.2008
ex 3824 90 9888Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2-chloroethane)0 %1.1.2007 — 31.12.2008
ex 3824 90 9889Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups0 %1.1.2007 — 31.12.2008
ex 3824 90 9890Hollow spheres of fused aluminosilicate containing 65-80 % amorphous aluminosilicate, with the following characteristics:

—a melting point of between 1 600 oC and 1 800 oC,

—a density of 0,6 - 0,8 g/cm3,

for use in the manufacture of particle filters in motor vehicles (1)
0 %1.1.2007 — 31.12.2008
ex 3824 90 9892Bis{4-[(5-chloro-2-hydroxyphenyl)azo]-3-hydroxy-N-phenyl-2-naphthalene carboxyamidate}ferrate with a mixture of ammonium, sodium and hydrogen cations0 %1.1.2007 — 31.12.2008
ex 3824 90 9893Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 42 % or more but not more than 52 % of diallyl 2,2'-oxydiethyl dicarbonate and 33 % or more but not more than 43 % of a copolymer of terephthalic acid, propane-1,2-diol and allyl alcohol0 %1.1.2007 — 31.12.2008
ex 3824 90 9894Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 73 % or more of diallyl 2,2'-oxydiethyl dicarbonate0 %1.1.2007 — 31.12.2008
ex 3824 90 9895Mixture of phytosterols, in the form of flakes, containing by weight 80 % or more of sterols and not more than 4 % of stanols0 %1.1.2007 — 31.12.2008
ex 3824 90 9896Zirconium dioxide, stabilised with calcium oxide, in the form of a powder0 %1.1.2007 — 31.12.2008
ex 3824 90 9897Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents0 %1.1.2007 — 31.12.2008
ex 3825 69 0010Spent catalyst, in the form of rodlets of diameter of 1 mm or more but not exceeding 3 mm, containing a mixture of sulfides of tungsten and of nickel on a support of zeolite, containing by weight not more than 10 % of tungsten and not more than 10 % of nickel, for regeneration as a catalyst for hydrocarbon cracking (1)0 %1.1.2007 — 31.12.2008
ex 3901 10 1010Linear polyethylene, of a specific gravity of 0,928 or more but not exceeding 0,935 and of a melt flow index of less than 0,6 g/min, for the manufacture of shrinkmelt binder fibres (1)0 %1.1.2007 — 31.12.2008
ex 3901 10 9010Polyethylene for the manufacture of photo-resist film for semiconductors or printed circuits (1)0 %1.1.2007 — 31.12.2008
ex 3901 10 9020Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a Haze value not exceeding 6 % and an elongation at break (MD/TD) of 210/340 (1)0 %1.1.2007 — 31.12.2008
ex 3901 10 9030Polyethylene, in the form of granules, containing by weight 15 % or more of copper, for the purpose of protecting against static charge build up and corrosion0 %1.1.2007 — 31.12.2008
ex 3901 20 9010Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not exceeding 0,985, for the manufacture of films for typewriter ribbon or similar ribbon (1)0 %1.1.2007 — 31.12.2008
ex 3901 20 9020Polyethylene, containing by weight 35 % or more but not more than 45 % of mica0 %1.1.2007 — 31.12.2008
ex 3901 20 9030Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,940 or more but not exceeding 0,943 and a melt flow index of 27 g/10 min (± 5 g/10 min) (MFI 190 oC/2,16 kg as determined by the ISO 1133 method), for the manufacture of bicomponent spunbonded non-wovens (1)0 %1.1.2007 — 31.12.2008
ex 3901 90 9081Copolymer of ethylene and propylene, modified with maleic anhydride, containing by weight more than 55 % of ethylene and not more than 3 % of maleic anhydride0 %1.1.2007 — 31.12.2008
ex 3901 90 9082Polyethylene modified with maleic anhydride, containing by weight not more than 4 % of maleic anhydride, for use in the manufacture of fuel tanks for motor vehicles (1)0 %1.1.2007 — 31.12.2008
ex 3901 90 9091Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid4 %1.1.2007 — 31.12.2008
ex 3901 90 9092Chlorosulphonated polyethylene0 %1.1.2007 — 31.12.2008
ex 3901 90 9093Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets (1)0 %1.1.2007 — 31.12.2008
ex 3901 90 9094Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene0 %1.1.2007 — 31.12.2008
ex 3901 90 9095Copolymer of ethylene and butylene, having hydroxyl or acrylate end-groups, containing by weight 40 % or more but not more than 60 % of butylene0 %1.1.2007 — 31.12.2008
ex 3902 90 9095
ex 3901 90 9096Linear A-B block copolymer of polyisoprene, whether or not epoxidized, and either ethylene-butylene copolymer or styrene-ethylene-butylene copolymer, having hydroxyl end-groups0 %1.1.2007 — 31.12.2008
ex 3902 90 9096
ex 3903 90 9050
ex 3901 90 9097Chlorinated polyethylene, in the form of powder0 %1.1.2007 — 31.12.2008
ex 3902 10 0010Polypropylene containing no plasticizer and not more than:

—7 mg/kg of aluminium,

—2 mg/kg of iron,

—1 mg/kg of magnesium,

—8 mg/kg of chloride
0 %1.1.2007 — 31.12.2008
ex 3902 10 0020Polypropylene, containing no plasticiser,

—of a melting point of more than 150 oC (as determined by the ASTM D 3417 method),

—of a heat of fusion of 15 J/g or more but not exceeding 70 J/g,

—of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method),

—of a tensile modulus of 69 MPa or more but not exceeding 379 MPa (as determined by the ASTM D 638 method)
0 %1.1.2007 — 31.12.2008
ex 3902 10 0030Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses (1)0 %1.1.2007 — 31.12.2008
ex 3902 20 0010Polyisobutylene, of an average molecular weight (Mn) of 700 or more but not exceeding 8000 %1.1.2007 — 31.12.2008
ex 3902 30 0091A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 390 %1.1.2007 — 31.12.2008
ex 3903 90 9025
ex 3902 30 0094Chlorinated polypropylene, chemically modified with maleic anhydride, containing by weight 23 % or more but not more than 26 % of chlorine and less than 5 % of epoxy resin0 %1.1.2007 — 31.12.2008
ex 3902 90 9092Polymers of 4-methylpent-1-ene0 %1.1.2007 — 31.12.2008
ex 3902 90 9097Hydrogenated polyisobutene, in liquid form0 %1.1.2007 — 31.12.2008
ex 3902 90 9098Synthetic poly-alpha-olefin with a viscosity at 100o Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene0 %1.1.2007 — 31.12.2011
ex 3903 19 0020Polystyrene of a molecular weight (Mn) not exceeding 5 0000 %1.1.2007 — 31.12.2008
ex 3903 90 9010Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, whether or not containing a styrene-butadiene block copolymer, in one of the forms mentioned in note 6 (b) to Chapter 39, for the manufacture of sheetings for head-liners for cars (1)0 %1.1.2007 — 31.12.2008
ex 3903 90 9015Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, also partially esterified, of an average molecular weight (Mn) not exceeding 3 000, in one of the forms mentioned in note 6 (a) and (b) to Chapter 390 %1.1.2007 — 31.12.2008
ex 3903 90 9020Copolymer of styrene with 2-ethylhexyl acrylate or with n-butyl acrylate, containing:

—10 mole % or more but not more than 16 mole % of acrylate,

—0,2 mg/kg or less of sodium and

—0,1 mg/kg or less of calcium
0 %1.1.2007 — 31.12.2008
ex 3903 90 9035Copolymer of α-methylstyrene and styrene, having a softening point exceeding 113 oC0 %1.1.2007 — 31.12.2008
ex 3911 90 9930
ex 3903 90 9040Copolymer of styrene with α-methylstyrene and acrylic acid, of a molecular weight (Mn) of 500 or more but not exceeding 6 0000 %1.1.2007 — 31.12.2008
ex 3906 90 9040
ex 3911 90 9950
ex 3903 90 9055Copolymer of styrene, methyl methacrylate, butyl acrylate and either acrylic acid or hydroxyethyl methacrylate, of a molecular weight (Mn) of 500 or more but not exceeding 6 0000 %1.1.2007 — 31.12.2008
ex 3906 90 9045
ex 3903 90 9065Copolymer of styrene, butyl acrylate, butyl methacrylate, methyl methacrylate and acrylic acid, in the form of powder, containing by weight (81 ± 1) % of styrene, (6 ± 1) % of butyl acrylate, (5 ± 1) % of butyl methacrylate, (7 ± 1) % of methyl methacrylate and (1 ± 0,5) % of acrylic acid0 %1.1.2007 — 31.12.2008
ex 3903 90 9070Ammonium polystyrenesulfonate, in the form of an aqueous solution0 %1.1.2007 — 31.12.2008
ex 3903 90 9075Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1 % of sodium dodecyl sulfate, in the form of an aqueous emulsion, for the manufacture of goods of subheading 3305 20 00 or of hair dyes of subheading 3305 90 90 (1)0 %1.1.2007 — 31.12.2008
ex 3903 90 9080Granules of copolymer of styrene and divinylbenzene a minimum diameter of 150 μm and a maximum 800 μm and containing by weight :

—minimum 65 % styrene,

—maximum 25 % divinylbenzene

for use in the manufacture of ion exchange resins (1)
0 %1.1.2007 — 31.12.2008
ex 3904 22 0091Poly(vinyl chloride), dyed in the mass, in the form of flakes, grains, pebbles or rectangular chips, for use as decorative elements in floor and wall coverings (1)0 %1.1.2007 — 31.12.2008
ex 3926 90 9880
ex 3904 30 0010Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight:

—81,5 % or more but not more than 84,5 % of vinyl chloride,

—13,8 % or more but not more than 16,2 % of vinyl acetate and

—0,8 % or more but not more than 1,2 % of maleic acid,

for the manufacture of goods of heading No 3215 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1)
0 %1.1.2007 — 31.12.2008
ex 3904 30 0020Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight:

—80,5 % or more but not more than 81,5 % of vinyl chloride,

—16,5 % or more but not more than 17,5 % of vinyl acetate and

—1,5 % or more but not more than 2,5 % of maleic acid,

for use in heat-sealing of plastics onto steel substrate for industrial uses (1)
0 %1.1.2007 — 31.12.2008
ex 3904 40 0091Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:

—87 % or more but not more than 92 % of vinyl chloride,

—2 % or more but not more than 9 % of vinyl acetate and

—1 % or more but not more than 8 % of vinyl alcohol,

in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of heading No 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1)
0 %1.1.2007 — 31.12.2008
ex 3904 40 0092Copolymer of vinyl chloride, vinyl acetate, hydroxypropyl acrylate and maleic acid, containing by weight 80 % or more but not more than 83 % of vinyl chloride, 1,6 % or more but not more than 2 % of hydroxy groups and 0,25 % or more but not more than 0,38 % of carboxyl groups0 %1.1.2007 — 31.12.2008
ex 3904 40 0093Copolymer of vinyl chloride and methyl acrylate, containing by weight (80 ± 1) % of vinyl chloride and (20 ± 1) % of methyl acrylate, in the form of a aqueous emulsion0 %1.1.2007 — 31.12.2008
ex 3904 50 9091Copolymer of vinylidene chloride with vinyl chloride, containing by weight 79,5 % or more of vinylidene chloride, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of fibres, monofilament or strip (1)0 %1.1.2007 — 31.12.2008
ex 3904 61 0010Mixture of polytetrafluoroethylene and mica, in one of the forms mentioned in note 6 (b) to Chapter 390 %1.1.2007 — 31.12.2008
ex 3904 61 0020Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions0 %1.1.2007 — 31.12.2008
ex 3904 61 0030Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not exceeding 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm0 %1.1.2007 — 31.12.2008
ex 3904 61 0060Mixture of polytetrafluoroethylene (PTFE), sodium chloride and a nonionic surfactant0 %1.1.2007 — 31.12.2008
ex 3904 69 9092Copolymer of tetrafluoroethylene and trifluoro(trifluoromethoxy)ethylene0 %1.1.2007 — 31.12.2008
ex 3904 69 9093Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 390 %1.1.2007 — 31.12.2008
ex 3904 69 9094Copolymer of ethylene and tetrafluoroethylene0 %1.1.2007 — 31.12.2008
ex 3904 69 9096Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 390 %1.1.2007 — 31.12.2008
ex 3904 69 9097Copolymer of chlorotrifluoroethylene and vinylidene difluoride0 %1.1.2007 — 31.12.2008
ex 3905 29 0091Copolymer of vinyl acetate, dibutyl maleate and acrylic acid, in the form of a solution in isopropyl acetate and toluene0 %1.1.2007 — 31.12.2008
ex 3905 91 0091Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate0 %1.1.2007 — 31.12.2008
ex 3905 99 9093Poly(vinyl acetate phthalate)0 %1.1.2007 — 31.12.2008
ex 3905 99 9094Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water0 %1.1.2007 — 31.12.2008
ex 3905 99 9095Hexadecylated or eicosylated polyvinylpyrrolidone0 %1.1.2007 — 31.12.2008
ex 3905 99 9096Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a molecular weight (Mw) of 25 000 or more but not exceeding 150 000 and containing by weight:

—9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and

—5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol
0 %1.1.2007 — 31.12.2008
ex 3905 99 9097Povidone (INN)-iodine0 %1.1.2007 — 31.12.2008
ex 3905 99 9098Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups0 %1.1.2007 — 31.12.2008
ex 3906 10 0010Poly(methyl methacrylate), in the form of expansible beads containing 2-methylpentane as blowing agent0 %1.1.2007 — 31.12.2008
39 069 060Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide0 %1.1.2007 — 31.12.2008
ex 3906 90 9010Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading No 3003 or 3004 (1)0 %1.1.2007 — 31.12.2008
ex 3906 90 9020Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 (1)6 %1.1.2007 — 31.12.2008
ex 3906 90 9030Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a molecular weight (Mn) of 500 or more but not exceeding 6 0000 %1.1.2007 — 31.12.2008
ex 3906 90 9050Polymers of esters of acrylic acid with one or more of the following monomers in the chain:

—chloromethyl vinyl ether,

—chloroethyl vinyl ether,

—chloromethylstyrene,

—vinyl chloroacetate,

—methacrylic acid,

—butenedioic acid monobutyl ester,

containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39
0 %1.1.2007 — 31.12.2008
ex 3906 90 9055Mixtures containing copolymers of methyl acrylate and ethylene and polyether-ester copolymers containing terephthalic acid, in the form of granules or pellets0 %1.1.2007 — 31.12.2008
ex 3906 90 9060Copolymer of butyl acrylate and vinyl chloride, containing by weight (58 ± 1) % of butyl acrylate and (42 ± 1) % of vinyl chloride, in the form of a aqueous emulsion0 %1.1.2007 — 31.12.2008
ex 3906 90 9070Copolymer of ethylene dimethacrylate with either methyl methacrylate or dodecyl methacrylate0 %1.1.2007 — 31.12.2008
ex 3906 90 9075Copolymer of N-[4,5-dihydro-5-oxo-1-(2,4,6-trichlorophenyl)(1',4-bi-1H-pyrazol)-3-yl]= methacrylamide, butyl acrylate and styrene, in the form of powder0 %1.1.2007 — 31.12.2008
ex 3906 90 9080Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates)0 %1.1.2007 — 31.12.2008
ex 3906 90 9085Non aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends0 %1.1.2007 — 31.12.2008
ex 3907 20 1110Poly(ethylene oxide) of an average molecular weight (Mn) of 100 000 or more0 %1.1.2007 — 31.12.2008
ex 3907 20 2110Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone0 %1.1.2007 — 31.12.2008
ex 3907 20 2120Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with an average molecular weight of 3 500 (± 100)0 %1.1.2007 — 31.12.2008
ex 3907 20 2910Products containing co-polymers of dextrose, sorbitol and citric or phosphoric acid, containing not less than 90 % by weight of co-polymers on the ashfree and anhydrous basis0 %1.1.2007 — 31.12.2011
ex 3907 20 2920Poly[oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxy-(2-hydroxytrimethylene)], of an average molecular weight (Mw) of more than 26 000, in one of the forms mentioned in note 6 (b) to Chapter 390 %1.1.2007 — 31.12.2008
ex 3907 20 9910Bis{2-[ω-hydroxy-poly(ethyleneoxy)]ethyl} hydroxymethylphosphonate0 %1.1.2007 — 31.12.2008
ex 3907 20 9915Poly(oxypropylene) having alkoxysilyl end-groups0 %1.1.2007 — 31.12.2008
ex 3907 20 9930Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)0 %1.1.2007 — 31.12.2008
ex 3907 20 9935Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate0 %1.1.2007 — 31.12.2008
ex 3907 20 9940Polydimethylsiloxane grafted with a poly(ethylene oxide) having C20 and C22 fatty acids ester end-groups0 %1.1.2007 — 31.12.2008
ex 3907 20 9945Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups0 %1.1.2007 — 31.12.2008
ex 3907 20 9950Copolymer of ethylene oxide and propylene oxide, having 2-aminopropyl end-groups0 %1.1.2007 — 31.12.2008
ex 3907 30 0020Epoxyde resin in the form of powder, containing by weight 44 % or more but not more than 55 % of quartz and 0,5 % or more but not more than 1 % of diantimony trioxide, for the coating of film capacitors (1)0 %1.1.2007 — 31.12.2008
ex 3907 30 0030Epoxyde resin, without solvent, containing mineral fillers (silica), without glass fibre, of a specific weight at 25 oC of 1,55 g/cm3 or more but not exceeding 1,60 g/cm30 %1.1.2007 — 31.12.2008
ex 3907 30 0040Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of heading No 8533, 8535, 8536, 8541, 8542 or 8548 (1)0 %1.1.2007 — 31.12.2008
ex 3916 90 1510
ex 3926 90 9870
ex 3907 30 0050Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with:

—a zinc borate hydrate content not exceeding 40 % by weight,

—a diantimony trioxide content not exceeding 5 % by weight
0 %1.1.2007 — 31.12.2008
ex 3907 40 0010Copolymer of hexane-1,6-diol, cyclohexane-1,4-dimethanol and ethylene carbonate0 %1.1.2007 — 31.12.2008
ex 3907 60 8010Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol0 %1.1.2007 — 31.12.2008
ex 3907 60 8020Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups0 %1.1.2007 — 31.12.2008
39 077 000Poly(lactic acid)0 %1.1.2007 — 31.12.2008
ex 3907 91 9010Diallyl phthalate prepolymer, in the form of powder0 %1.1.2007 — 31.12.2008
ex 3907 99 1910Poly(oxy-1,4-phenylenecarbonyl), in the form of powder0 %1.1.2007 — 31.12.2008
ex 3907 99 9810
ex 3907 99 1920Liquid crystal copolyester with a melting point of not less than 270 oC, whether or not containing fillers0 %1.1.2007 — 31.12.2008
ex 3907 99 1940Copolymer of isophthalic acid and 5-sodiosulphoisophthalic acid with cyclohexanedimethanol and diethylene glycol0 %1.1.2007 — 31.12.2008
ex 3907 99 1950Semi-crystalline polycyclohexylenedimethylene terephthalate polymer resin, containing by weight 10 % or more but not more than 40 % of glass fibre, in the form of granules or pellets0 %1.1.2007 — 31.12.2011
ex 3908 90 0010Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 390 %1.1.2007 — 31.12.2008
ex 3908 90 0020Copolymer consisting of hexamethylenediamine, isophthalic acid and terephthalic acid, in one of the forms mentioned in note 6(b) to Chapter 390 %1.1.2007 — 31.12.2008
ex 3908 90 0030Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine0 %1.1.2007 — 31.12.2008
ex 3908 90 0040Thermoplastic polyamide resin having a fire point of more than 750 oC, for use in the manufacture of deflection yokes of cathode ray tubes (1)0 %1.1.2007 — 31.12.2008
ex 3909 40 0010Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm0 %1.1.2007 — 31.12.2008
ex 3910 00 00103-[(2-Aminoethyl)amino]propyl(methyl)cyclosiloxane0 %1.1.2007 — 31.12.2008
ex 3910 00 0020Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]0 %1.1.2007 — 31.12.2008
ex 3910 00 0040Biocompatible silicones for the manufacture of long term surgical implants (1)0 %1.1.2007 — 31.12.2011
ex 3911 90 1910Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4'-biphenylene)0 %1.1.2007 — 31.12.2008
ex 3911 90 9925Copolymer of vinyltoluene and α-methylstyrene0 %1.1.2007 — 31.12.2008
ex 3911 90 9940Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight0 %1.1.2007 — 31.12.2008
ex 3911 90 9945Copolymer of maleic acid and methyl vinyl ether0 %1.1.2007 — 31.12.2008
ex 3911 90 9955Solution containing:

—(36 ± 0,5) % by weight of polyamide with lateral ester groups,

—(2 ± 0,5) % by weight of acrylic ester,

—(48 ± 0,5) % by weight of 1-methyl-2-pyrrolidone,

—(12 ± 0,5) % by weight of bis(2-methoxyethyl) ether,

—500 μg/kg or less of potassium and

—500 μg/kg or less of iron,

for use in the manufacture of goods of heading No 8542 (1)
0 %1.1.2007 — 31.12.2008
ex 3911 90 9960Hydrocarbon prepolymer, obtained by the reaction of cyclopentadiene and 1,3-pentadiene0 %1.1.2007 — 31.12.2008
ex 3911 90 9965Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether0 %1.1.2007 — 31.12.2008
ex 3911 90 9975Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 220 μm or more but not exceeding 575 μm0 %1.1.2007 — 31.12.2008
ex 3926 90 9775
ex 3911 90 9980Poly[(8-methyl-8-methoxycarbonyltricyclo[5.2.1.02,6]decane-3,5-diyl)ethylene]0 %1.1.2007 — 31.12.2008
ex 3911 90 9985Polymer of ethylene and styrene, cross-linked with divinylbenzene, in the form of a suspension0 %1.1.2007 — 31.12.2008
ex 3911 90 9986Copolymer of methyl vinyl ether and maleic acid anhydride0 %1.1.2007 — 31.12.2011
ex 3912 11 0010Non-plasticized cellulose triacetate, in the form of flakes, for the manufacture of cellulose triacetate yarn (1)0 %1.1.2007 — 31.12.2008
ex 3912 39 1010Ethylcellulose, not plasticized0 %1.1.2007 — 31.12.2008
ex 3912 39 1020Ethylcellulose, in the form of aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulfate, containing by weight (27 ± 3) % of ethylcellulose0 %1.1.2007 — 31.12.2008
ex 3912 39 8010Cellulose, both hydroxyethylated and ethylated, insoluble in water0 %1.1.2007 — 31.12.2008
ex 3912 39 8020Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms0 %1.1.2007 — 31.12.2008
ex 3912 90 1010Cellulose acetate propionate, non-plasticised, in the form of powder:

—containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method) and

—of a viscosity not exceeding 120 poise (as determined by the ASTM D 817-72 method),

for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings (1)
0 %1.1.2007 — 31.12.2008
ex 3912 90 1020Hydroxypropyl methylcellulose phthalate0 %1.1.2007 — 31.12.2008
ex 3913 90 0092Protein, chemically modified by carboxylation and/or phthalic acid addition, having a molecular weight of 1000 00 to 3000 000 %1.1.2007 — 31.12.2008
ex 3913 90 0094Granules containing by weight:

—35 % or more but less than 75 % of a high amylose extruded biopolymer produced from corn starch,

—5 % or more but less than 16 % polyvinyl alcohol,

—10 % or more but less than 46 % of polyol plasticisers,

—0,25 % or more but less than 3 % of stearic acid,

—whether or not containing 30 % (± 10 %) of biodegradable polyester resin but never to a level that exceeds the amount of the high amylose biopolymer
0 %1.1.2007 — 31.12.2011
ex 3913 90 0095Chondroitinsulfuric acid, sodium salt0 %1.1.2007 — 31.12.2008
ex 3913 90 0096Powder consisting of 90 % (± 5 %) by weight of a high amylose extruded biopolymer produced from corn starch, 10 % (± 5 %) by weight of a synthetic polymer and 0,5 % (± 0,25 %) of stearic acid0 %1.1.2007 — 31.12.2011
ex 3913 90 0097Chitosonium pyrrolidonecarboxylate0 %1.1.2007 — 31.12.2008
ex 3913 90 0098Sodium hyaluronate0 %1.1.2007 — 31.12.2008
ex 3915 90 9010Waste, parings and scrap of photographic, cinematographic and radiographic films0 %1.1.2007 — 31.12.2008
ex 3916 90 9010Composite profile shape, reinforced with glass fibres, produced by pultrusion, for the manufacture of window frames (1)0 %1.1.2007 — 31.12.2008
ex 3917 32 1010Flexible pipe of silicone foam, with continuous channels, of a Shore A hardness of 7 or more but not exceeding 48 and a density of 0,28 g/cm3 or more but not exceeding 0,92 g/cm30 %1.1.2007 — 31.12.2008
ex 3917 32 3191Assembly of heat-shrinkable tubing of polyethylene with poly(vinyl acetate), arranged in parallel at equally spaced intervals and attached at one or both ends by perforated plastic strips, in rolls0 %1.1.2007 — 31.12.2008
ex 3917 32 9910
ex 3926 90 9745
ex 3917 32 3920Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not exceeding 110 μm0 %1.1.2007 — 31.12.2008
ex 3917 32 3930Thermo-shrinkable polystyrene tube for use in the manufacture of zinc-carbon batteries (1)0 %1.1.2007 — 31.12.2008
ex 3919 10 1910Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %1.1.2007 — 31.12.2008
ex 3919 10 3820
ex 3919 90 3810
ex 3920 99 2820
ex 3919 10 3110Reflecting laminated sheet, consisting of a film of polycarbonate totally embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material, whether or not covered on one side with an adhesive layer and a release sheet0 %1.1.2007 — 31.12.2008
ex 3919 10 3830
ex 3919 90 3150
ex 3920 61 0020
ex 3919 10 3810Self-adhesive tape of metallised polyurethane containing glass beads for use in the manufacture of marine life-saving equipment (1)0 %1.1.2007 — 31.12.2008
ex 3919 10 3840Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 16 cm wide, 140-200 m long and with a total thickness of 20 μm, not for retail sale0 %1.1.2007 — 31.12.2008
ex 3919 10 6191Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %1.1.2007 — 31.12.2008
ex 3919 90 6194
ex 3919 10 6192Black polyvinyl chloride film having a high gloss of more than 90 degrees as determined by test method ASTM D 2457 covered on one side with a protective polyethylene terephthalate film and on the other side a pressure sensitive adhesive with channels and a polyethylene terephthalate release liner0 %1.1.2007 — 31.12.2011
ex 3919 90 6195
ex 3919 10 6991Black acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 o of more than 25 N/cm (as determined by the ASTM D 3330 method)0 %1.1.2007 — 31.12.2008
ex 3919 90 6996
ex 3919 10 6995Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet0 %1.1.2007 — 31.12.2008
ex 3919 90 6998
ex 3919 90 1010Shaped sheet of plastic, with an adhesive layer containing polyisobutylene and pectin, for the manufacture of colostomy bags (1)0 %1.1.2007 — 31.12.2008
ex 3919 90 3115Poly(ethylene terephthalate) film, with a coloured layer on one side and a self adhesive layer on the other, coated on both sides with protective film, with an overall thickness of 100 (± 10) μm, in rolls, for the manufacture of optical filters (1)0 %1.1.2007 — 31.12.2008
ex 3919 90 3125Polyethylene terephthalate film:

—laminated on one side with a copper mesh of a line width of 10 to 15 μm,

—a coloured adhesive layer on the other,

—coated on both sides with a protective film,

—with a total thickness of 110–210 μm

for use in the manufacture of optical filters (1)
0 %1.1.2007 — 31.12.2008
ex 3919 90 3135Polyethylene terephthalate film, covered on one side with a tinted layer and on the other with an adhesive layer, coated on both sides with a protective film, with an overall thickness of 235 (± 5) μm, for the manufacture of optical filters (1)0 %1.1.2007 — 31.12.2008
ex 3919 90 3140Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers (1)0 %1.1.2007 — 31.12.2008
ex 3920 62 1920
ex 3920 62 9020
ex 3920 63 0030
ex 3920 69 0030
ex 3919 90 3160Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner0 %1.1.2007 — 31.12.2008
ex 3919 90 3170Poly(ethylene terephthalate) sheet, covered on one side with an antistatic layer and a hardcoat layer and on the other side with an adhesive layer and a release sheet, in rolls, for the manufacture of optical filters (1)0 %1.1.2007 — 31.12.2008
ex 3919 90 6192Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter not exceeding 100 μm0 %1.1.2007 — 31.12.2008
ex 3919 90 6992
ex 3919 90 6193Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for the protection of the surface of silicon discs (1)0 %1.1.2007 — 31.12.2008
ex 3919 90 6993
ex 3920 10 8925
ex 3919 90 6995Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, whether or not covered on one side with an adhesive layer and a release sheet0 %1.1.2007 — 31.12.2008
ex 3920 51 0030
ex 3920 10 2620Film of polyethylene, of a thickness of 20 μm or more but not exceeding 45 μm, containing calcium carbonate in the mass, for the manufacture of napkins for babies or of sanitary towels or of tampons or of disposable surgical gowns (1)0 %1.1.2007 — 31.12.2008
ex 3920 10 2630Film of a thickness not exceeding 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber (1)0 %1.1.2007 — 31.12.2008
ex 3920 10 8920
ex 3920 10 2640Film of polyethylene, of a kind used for typewriter ribbon0 %1.1.2007 — 31.12.2008
ex 3920 10 4091Synthetic paper pulp, in the form of moist sheets, made from unconnected finely-branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent0 %1.1.2007 — 31.12.2008
ex 3920 10 4092Laminated sheet or strip consisting of a film composed of a blend of a copolymer of ethylene with vinyl acetate and a modified ethylene-propylene-elastomer (EPM) or a modified ethylene-propylene-diene elastomer (EPDM), coated or covered on both sides with a film of a copolymer of ethylene with vinyl acetate0 %1.1.2007 — 31.12.2008
ex 3920 10 8935Reflecting film, consisting of a layer of polyethylene, a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, a hot-melt adhesive layer, covered on one side or on both sides with a release film0 %1.1.2007 — 31.12.2008
ex 3920 10 8940Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not exceeding 1,2 mm0 %1.1.2007 — 31.12.2011
ex 3920 20 2130Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm.0 %1.1.2007 — 31.12.2008
ex 3920 20 2991Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having:

—a thickness of 55 μm or more but not exceeding 97 μm,

—a tensile modulus in the machine direction of 0,75 GPa or more but not exceeding 1,45 GPa and

—a tensile modulus in the transverse direction of 0,20 GPa or more but not exceeding 0,55 GPa
0 %1.1.2007 — 31.12.2008
ex 3920 20 9091Synthetic paper pulp, in the form of moist sheets, made from unconnected finely-branched polypropylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent0 %1.1.2007 — 31.12.2008
ex 3920 20 9092Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not exceeding 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester0 %1.1.2007 — 31.12.2008
ex 3920 20 9093Polypropylene sheet, of a thickness of 0,5 mm or more but not exceeding 1,0 mm, having a tensile strength at break of 14,7 MPa or more but not exceeding 21 MPa (as determined by the ASTM D 638 method), in rolls of a width of 3,81 m0 %1.1.2007 — 31.12.2008
ex 3920 30 0020Laminated sheet or strip, consisting of a film composed of a blend of a thermoplastic elastomer (TPE) of styrene-butadiene-styrene (SBS) with polyethylene or polypropylene, of a thickness of 100 μm or more but not exceeding 200 μm, coated or covered on both sides with a film of polypropylene of a thickness not exceeding 20 μm0 %1.1.2007 — 31.12.2008
ex 3920 43 1091Reflecting sheeting, consisting solely of a single layer of poly(vinyl chloride), wholly embossed on one side in a regular pyramidal pattern0 %1.1.2007 — 31.12.2008
ex 3920 49 1091
ex 3920 43 1092Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not exceeding 80 μm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride)0 %1.1.2007 — 31.12.2008
ex 3920 43 1093Poly(vinyl chloride) sheet, with relief printing, of a kind used in the templates for textile printing0 %1.1.2007 — 31.12.2008
ex 3920 43 1094Film of a specular gloss of 70 or more, measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not exceeding 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1 000 mm or more but not exceeding 1 450 mm, for use in the manufacture of goods of heading No 9 403 (1)0 %1.1.2007 — 31.12.2008
ex 3920 49 1093
ex 3920 43 1095Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet0 %1.1.2007 — 31.12.2008
ex 3920 49 1092
ex 3920 43 1096Film, of a specular gloss of 70 or more measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), for coating panels and doors of a kind used in the manufacture of domestic appliances (1)0 %1.1.2007 — 31.12.2008
ex 3920 43 1097Film embossed to a depth of not more than 12 μm, of a specular gloss of 7 or more but not exceeding 17, measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of at least two layers of poly(vinyl chloride), of a total thickness not exceeding 0,5 mm, covered on the embossed side with a protective film, in rolls of a width of 1 400 mm or more but not exceeding 1 420 mm, for use in the manufacture of goods of heading No 9403 (1)0 %1.1.2007 — 31.12.2008
ex 3920 51 0010Poly(methyl methacrylate) plate, with an antistatic coating, of dimensions of 738 × 972 mm (± 1,5 mm)0 %1.1.2007 — 31.12.2008
ex 3920 51 0020Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not exceeding 19 mm0 %1.1.2007 — 31.12.2008
ex 3920 61 0010Polycarbonate film of a thickness not exceeding 15 μm, for the manufacture of film capacitors (1)0 %1.1.2007 — 31.12.2008
ex 3920 62 1901Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not exceeding 350 μm, consisting especially of a layer containing carbon black0 %1.1.2007 — 31.12.2008
ex 3920 62 1903
ex 3920 62 1904Poly(ethylene terephthalate) film, of a thickness of less than 11 μm, for the manufacture of audiodigital tapes for cassettes (1)0 %1.1.2007 — 31.12.2008
ex 3920 62 1906
ex 3920 62 1907Poly(ethylene terephtalate) film, not coated with an adhesive, of a thickness not exceeding 25 μm, either:

—only dyed in the mass, or

—dyed in the mass and metallized on one side
0 %1.1.2007 — 31.12.2008
ex 3920 62 1909
ex 3920 62 1911Film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %1.1.2007 — 31.12.2008
ex 3920 62 1913
ex 3920 62 1914Poly(ethylene terephthalate) film, of a thickness of 20 μm or more but not exceeding 150 μm, coated on one side with silicone, for use in the manufacture of window film (1)3 %1.1.2007 — 31.12.2011
ex 3920 62 1916
ex 3920 62 1917Laminated film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %1.1.2007 — 31.12.2008
ex 3920 62 1919
ex 3920 62 1921Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not exceeding 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm (1)0 %1.1.2007 — 31.12.2008
ex 3920 62 1923
ex 3920 62 1924Single ply film of poly(ethylene terephthalate) only, of a thickness not exceeding 120 μm, which only:

—contains a colouring and/or UV-absorbing material throughout the mass and

—is metallised on one side,

whether or not coated on one or both sides with a vinyl acrylate polymer but having no other coating or adhesive
0 %1.1.2007 — 31.12.2008
ex 3920 62 1926
ex 3920 62 1927Film of poly(ethylene terephthalate), of a total thickness not exceeding 120 μm, of a width of 100 mm or more but not exceeding 115 mm, coated on both sides with one or more layers containing different chemicals, for the manufacture of goods of subheading 3701 20 00 (1)0 %1.1.2007 — 31.12.2008
ex 3920 62 1929
ex 3920 62 1931Film of poly(ethylene terephthalate), on one side metallised and coated with white ink and a protective layer and on the other side coated with a thermosensitive seal layer, of a width of 100 mm or more but not exceeding 150 mm, for the manufacture of goods of subheading 3701 20 00 (1)0 %1.1.2007 — 31.12.2008
ex 3920 62 1933
ex 3920 62 1934Film of poly(ethylene terephthalate), coated on one side with a layer of modified polyester, of a thickness of 20 μm (± 0,7 μm) or of 30 μm (± 0,9 μm), for the manufacture of audio magnetic tapes of a total thickness of 33 μm or more (1)0 %1.1.2007 — 31.12.2008
ex 3920 62 1936
ex 3920 62 1937Poly(ethylene terephthalate) film, of a thickness not exceeding 12 μm, coated on one side with a layer of aluminium oxide of a thickness not exceeding 35 nm0 %1.1.2007 — 31.12.2008
ex 3920 62 1939
ex 3920 62 1941Poly(ethylene terephthalate) film, of a thickness of 18 μm or more but not exceeding 25 μm, having:

—a shrinkage of (3,4 ± 0,1) % in the machine direction (as determined by the ASTM D 1204 method) and

—a shrinkage of (0,3 ± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method)
0 %1.1.2007 — 31.12.2008
ex 3920 62 1943
ex 3920 62 1944Poly(ethylene terephthalate) film, of a thickness not exceeding 19 μm or of a weight of 20 g/m2 or more but not exceeding 26,7 g/m2, for use in the manufacture of photo-resist film (1)0 %1.1.2007 — 31.12.2008
ex 3920 62 1946
ex 3920 62 1947Film of poly(ethylene terephthalate), coated on both sides with a layer of epoxy acrylic resin, of a total thickness of 37 μm (± 3 μm)0 %1.1.2007 — 31.12.2008
ex 3920 62 1949
ex 3920 62 1951Film of poly(ethylene terephthalate), coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness not exceeding 300 μm and having a surface resistivity not exceeding 10 000 ohms (per square) (as determined by the ASTM D 257-93 method)0 %1.1.2007 — 31.12.2008
ex 3920 62 1953
ex 3920 62 1954Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45 o and 18 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method) and a width of 1 600 mm or more0 %1.1.2007 — 31.12.2008
ex 3920 62 1956
ex 3920 62 1957Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not exceeding 253 μm, coated on both sides with an antistatic layer0 %1.1.2007 — 31.12.2008
ex 3920 62 1959
ex 3920 62 1961Film of a total thickness of 4,5 μm (± 0,16 μm), consisting of a biaxially-oriented poly(ethylene terephthalate) film, of an elastic modulus (in the machine direction) of 12 kg/mm2 (± 2 kg/mm2) and a tensile strength (in the machine direction) of more than 28 kg/mm2, and of an anti-adherent coating0 %1.1.2007 — 31.12.2008
ex 3920 62 1963
ex 3920 62 1967Poly(ethylene terephthalate) film, coated with among other a scratch resistant layer based on polyacrylate and a thermoadhesive layer, of a nominal width of 790 mm and a total thickness of 23 μm or more but not exceeding 26 μm0 %1.1.2007 — 31.12.2008
ex 3920 62 1969
ex 3920 62 1971Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) or poly(ethylene naphthalate) and multiple layers of poly(methyl methacrylate), of a reflectance coefficient of 95 % or more (as determined by the ASTM E 1164-94 and ASTM E 387-95 methods) and a total thickness not exceeding 70 μm0 %1.1.2007 — 31.12.2008
ex 3920 69 0070
ex 3920 62 1972Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) and multiple layers of poly(methyl methacrylate), of a total thickness of 51 μm (± 10 %), for use in the manufacture of laminated solar-reflecting automotive glass (1)0 %1.1.2007 — 31.12.2008
ex 3920 62 1973Iridescent film of polyester and poly(methyl methacrylate)0 %1.1.2007 — 31.12.2008
ex 3920 69 0040
ex 3920 62 1974Multilayer film of a thickness not exceeding 150 μm, consisting of a polyester film coated on one side with polycarbonate resin, metallized on the other side with titanium coated with polycarbonate resin and other layers containing N, N'-diphenyl-N, N'-di-m-tolylbiphenyl-4,4'-ylenediamine0 %1.1.2007 — 31.12.2008
ex 3920 62 1976
ex 3920 62 1977Sheet of poly(ethylene terephthalate), containing:

—temperature-sensitive layers which form primary colours after heating,

—reflective layer,

—protective layer,

to be used in polychromatic thermal printers (1)
0 %1.1.2007 — 31.12.2008
ex 3920 62 1988Laminated sheet, consisting of a biaxially oriented film of poly(ethylene terephthalate), covered on one side or on both sides with a layer of poly(ethylene terephthalate), for use in the manufacture of identity cards, credit cards and similar products (including “smart” cards) (1)0 %1.1.2007 — 31.12.2008
ex 3920 62 9031Film of poly(ethylene terephthalate), of a thickness of 500 μm (± 25 μm)0 %1.1.2007 — 31.12.2008
ex 3920 62 9033
ex 3920 62 9040Strips of poly(ethylene terephthalate), covered on both sides with a layer of chemically modified polyester, of a width not exceeding 16 mm and a thickness of 0,5 mm or more but not exceeding 2 mm, having a tensile strength at break of 0,7 GPa or more (as determined by the ASTM D 638 method)0 %1.1.2007 — 31.12.2008
ex 3920 69 0020Film of poly(ethylene naphthalene-2,6-dicarboxylate)0 %1.1.2007 — 31.12.2008
ex 3920 69 0050Polycondensation product of terephthalic acid with a mixture of cyclohex-1,4-ylenedimethanol and ethane-1,2-diol, in the form of a film0 %1.1.2007 — 31.12.2008
ex 3920 69 0060Film of a copolymer of ethylene terephthalate and ethylene isophthalate, of a thickness not exceeding 2 μm0 %1.1.2007 — 31.12.2008
ex 3920 91 0091Poly(vinyl butyral) film having a graduated coloured band3 %1.1.2007 — 31.12.2008
ex 3920 91 0092Plasticized film of polyvinyl butyral, containing by weight:

—either 14,5 % or more but not more than 17,5 % of dihexyl adipate,

—or 14,5 % or more but not more than 28,5 % of dibutyl sebacate
0 %1.1.2007 — 31.12.2008
ex 3920 91 0093Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:

—a visible light transmission of 50 % or more,

—coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),

—a total thickness not exceeding 0,2 mm without taking the presence of poly(vinyl butyral) into account,

for use in the manufacture of heat-reflecting or decorative laminated glass (1)
0 %1.1.2007 — 31.12.2008
ex 3920 99 2810Reflecting sheet of metallised polyurethane, containing glass beads, coated with a hot-melt adhesive layer, covered on one or both sides with a release sheet, in rolls of a width of 1 020 mm (± 20 mm), for slitting into safety clothing reflecting strip (1)0 %1.1.2007 — 31.12.2008
ex 3920 99 2830Film of polyimide, not containing epoxyde resin and/or glass fibres:

—metallized by sputtering with copper on one side or on both sides,

—metallized by sputtering with copper and plated on one side or on both sides with refined copper or

—covered on one side or on both sides with a copper foil
0 %1.1.2007 — 31.12.2008
ex 3921 90 5510
ex 7410 21 0030
ex 3920 99 2840Mono-axially oriented polymer film containing the following monomers:

—Poly (tetramethylene ether glycol),

—Bis (4-isocyanotocyclohexyl) methane,

—1,4-Butanediol or 1,3-Butanediol,

—with a thickness of 0,25mm or more but not more than 5,0mm,

—embossed with a regular pattern on one surface,

—and covered with a release sheet
0 %1.1.2007 — 31.12.2008
39 209 953Ion-exchange membranes of fluorinated plastic material0 %1.1.2007 — 31.12.2008
ex 3920 99 5955
ex 3920 99 5920Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1 mm and containing by weight:

—2 % or less of unhydrolysed acetate groups evaluated as vinyl acetate and

—5 % or more but not more than 25 % of glycerol as plasticizer,

for the manufacture of roof-windows (1)
0 %1.1.2007 — 31.12.2008
ex 3920 99 5925Poly(1-chlorotrifluoroethylene) film0 %1.1.2007 — 31.12.2008
ex 3920 99 5930Film and sheet of a copolymer of ethylene with chlorotrifluoroethylene, of a thickness of 12 μm or more but not exceeding 400 μm0 %1.1.2007 — 31.12.2008
ex 3920 99 5935Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1 mm and of a width of 2,20 m or more, with an extension at break, in the transverse direction, of 350 % or more0 %1.1.2007 — 31.12.2008
ex 3920 99 5940Biaxially-oriented film of poly(vinyl alcohol), coated on both sides, of a total thickness of less than 1 mm0 %1.1.2007 — 31.12.2008
ex 3920 99 5945Iridescent film of polyester, polyethylene and an ethylene-vinyl acetate copolymer0 %1.1.2007 — 31.12.2008
ex 3920 99 5950Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019 mm or more but not exceeding 0,14 mm, impermeable to water vapour0 %1.1.2007 — 31.12.2008
ex 3920 99 5960Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not exceeding 90 μm, a tensile strength at break of 20 MPa or more but not exceeding 45 MPa and an elongation at break of 250 % or more but not exceeding 900 %0 %1.1.2007 — 31.12.2008
ex 3920 99 9010Biodegradeable sheet of a thickness not exceeding 1 mm containing by weight:

—90 % (± 5 %) starch,

—10 % (± 5 %)of a synthetic polymer,

—0,5 % (± 0,5 %) of stearic acid
0 %1.1.2007 — 31.12.2008
ex 3920 99 9020Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not exceeding 2 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD displays0 %1.1.2007 — 31.12.2011
ex 3921 13 1010Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not exceeding 0,100920 %1.1.2007 — 31.12.2008
ex 3921 14 0010Cellular film of regenerated cellulose, of a thickness not exceeding 350 μm0 %1.1.2007 — 31.12.2008
ex 3921 19 0091Microporous polypropylene film of a thickness not exceeding 100 μm0 %1.1.2007 — 31.12.2008
ex 3921 19 0092Microporous film consisting of mixtures of cellulose acetate and cellulose nitrate, of a thickness not exceeding 200 μm0 %1.1.2007 — 31.12.2008
ex 3921 19 0093Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment (1)0 %1.1.2007 — 31.12.2008
ex 3921 19 0094Polyethylene film, of a thickness of 16 μm or more but not exceeding 24 μm, having:

—a weight of 19 g/m2 (± 2 g/m2),

—a water vapour transmission rate of 5 000 g/m2 or more but not exceeding 30 000 g/m2 per day (as determined by the ASTM D 6701-01 method),

—an elongation in the transverse direction of 25 % or more at a load of 500 g or less,

—an elongation in the machine direction of 50 % or more but not exceeding 100 % (as determined by the ASTM D 882-91 method),

for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles (1)
0 %1.1.2007 — 31.12.2008
ex 3921 19 0095Film of polyethersulfone, of a thickness not exceeding 200 μm0 %1.1.2007 — 31.12.2008
ex 3921 19 0096Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not exceeding 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not exceeding 40 μm0 %1.1.2007 — 31.12.2008
ex 3921 90 1935Composite plate of polycarbonate and poly(butylene terephthalate), reinforced with glass fibres0 %1.1.2007 — 31.12.2008
ex 3921 90 1945Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres0 %1.1.2007 — 31.12.2008
ex 3921 90 6091Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulfonic acid groups, whether or not in the potassium or sodium salt form0 %1.1.2007 — 31.12.2008
ex 5407 71 0020
ex 5903 90 9910
ex 3921 90 6092Reinforced polypropylene sheet, of a thickness of 0,91 mm or more but not exceeding 1,12 mm, having a breaking strength of 890 N or more but not exceeding 1 500 N (as determined by the ASTM D 751 method), in rolls of a width of 3,81 m0 %1.1.2007 — 31.12.2008
ex 3921 90 6093Film, of a specular gloss of 30 or more but not exceeding 60 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), joined by a metallized adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances (1)0 %1.1.2007 — 31.12.2008
ex 3926 90 9220Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material0 %1.1.2007 — 31.12.2008
ex 3926 90 9710Microspheres of polymer of divinylbenzene, of a diameter of 4,5 μm or more but not exceeding 80 μm0 %1.1.2007 — 31.12.2008
ex 3926 90 9715Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems (1)0 %1.1.2007 — 31.12.2008
ex 3926 90 9720Tape pad, for use in the manufacture of goods of heading No 8 523 (1)0 %1.1.2007 — 31.12.2008
ex 3926 90 9725Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not exceeding 4,6 μm0 %1.1.2007 — 31.12.2008
ex 3926 90 9730Guide pin and pole, for use in the manufacture of goods of subheading 8523 29 15 (1)0 %1.1.2007 — 31.12.2008
ex 3926 90 9735Microspheres of polyalkylsiloxane, on which are covalently bonded organic compounds, of a diameter of 1 μm or more but not exceeding 30 μm0 %1.1.2007 — 31.12.2008
ex 3926 90 9740Hollow microspheres of a copolymer of isooctylacrylate and acrylic acid, having a diameter of 10 μm or more but not exceeding 1 000 μm, dispersed in water0 %1.1.2007 — 31.12.2008
ex 3926 90 9755Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not exceeding 1 200 μm and of a weight of 21 g/m2 or more but not exceeding 42 g/m20 %1.1.2007 — 31.12.2008
ex 4007 00 0010Siliconated vulcanised rubber thread and cord0 %1.1.2007 — 31.12.2008
ex 4008 11 0010Blocks or sheets of cellular vulcanised rubber of modified ethylene-propylene-diene (EPDM) blended with chloroprene, which satisfy the Underwriters Laboratories Flammability Standard UL94HF-10 %1.1.2007 — 31.12.2008
ex 4016 99 9920Soft rubber sealing stoppers for the manufacture of electrolytic capacitors (1)0 %1.1.2007 — 31.12.2008
4105 10 10Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 41140 %1.1.2007 — 31.12.2008
4105 10 90
4105 30 91
4105 30 99
4106 21 10Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 41140 %1.1.2007 — 31.12.2008
4106 21 90
4106 22 90
4106 31 10Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading No 41140 %1.1.2007 — 31.12.2008
4106 31 90
4106 32 10
4106 32 90
4106 40 90
4106 91 00
4106 92 00
ex 5004 00 1010Yarn spun entirely from silk, not put up for retail sale2,5 %1.1.2007 — 31.12.2008
ex 5004 00 9010
ex 5005 00 1010Yarn spun entirely from silk waste (noil), not put up for retail sale0 %1.1.2007 — 31.12.2008
ex 5005 00 9010
ex 5205 31 0010Six ply yarn of bleached cotton, measuring 925 dtex or more but not more than 989 dtex per single yarn, for the manufacture of tampons (1)0 %1.1.2007 — 31.12.2008
5208 11 10Fabrics for the manufacture of bandages, dressings and medical gauzes5,2 %1.1.2007 — 31.12.2008
ex 5402 45 0010Polyamide yarn, not textured, untwisted or with a twist not exceeding 22 turns per metre, of crimpable bicomponent filaments consisting of poly(hexamethylene adipamide) with a copolyamide, for the manufacture of:

—knee-length stockings of subheadings6115 10 90, 6115 30 11 and 6115 96 10,

—women's stockings of subheadings6115 30 19 and 6115 96 91 or

—panty hose (tights) of subheading 6115 21 00

 (1)
0 %1.1.2007 — 31.12.2008
ex 5402 45 0020Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid0 %1.1.2007 — 31.12.2008
ex 5402 47 0010Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1 650 decitex or more but not more than 1 800 decitex, consisting of 110 filaments or more but not more than 120 filaments, each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75 % or more but not exceeding 77 % of poly(ethylene terephthalate), for use in the manufacture of roofings (1)0 %1.1.2007 — 31.12.2011
ex 5402 49 0010Multifilaments yarn of polytetrafluoroethylene0 %1.1.2007 — 31.12.2008
ex 5402 69 9020
ex 5402 49 0030Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures (1)0 %1.1.2007 — 31.12.2008
ex 5402 49 0050Non-textured filament yarn of poly(vinyl alcohol)0 %1.1.2007 — 31.12.2008
ex 5402 59 9020
ex 5402 69 9040
ex 5402 49 0060Yarn wholly of poly(glycollic acid)0 %1.1.2007 — 31.12.2008
ex 5402 69 9010
ex 5402 49 0070Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1 000 continuous filaments or more but not more than 25 000 continuous filaments, of a weight per metre of 0,12 g or more but not exceeding 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn (1)0 %1.1.2007 — 31.12.2008
ex 5402 49 0080Polyethylene filament yarn, untwisted, of either 55, 110, 165 or 1 760 decitex, for the manufacture of goods of heading No 5607 (1)0 %1.1.2007 — 31.12.2008
ex 5402 49 0085Synthetic filament yarn, single, untwisted, wholly of poly(thio-1,4-phenylene)0 %1.1.2007 — 31.12.2008
ex 5404 19 0010Monofilament of polytetrafluoroethylene0 %1.1.2007 — 31.12.2008
ex 5404 19 0020Monofilament of poly(1,4-dioxanone)0 %1.1.2007 — 31.12.2008
ex 5404 19 0030Monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5-dione, for the manufacture of surgical sutures (1)0 %1.1.2007 — 31.12.2008
ex 5404 19 0040Monofilaments of a stabilised blend of polyester with polyurethane, of 67 decitex or more and of which no cross-sectional dimension exceeds 1 mm0 %1.1.2007 — 31.12.2008
ex 5404 19 0050Monofilaments of polyester or poly(butylene terephthalate), with crosssectional dimension of 0,5mm or more but not exceeding 1mm, for use in the manufacture of zippers (1)0 %1.1.2007 — 31.12.2008
ex 5404 90 9020Strip of polyimide0 %1.1.2007 — 31.12.2008
ex 5407 71 0010Woven fabrics of poly(vinyl alcohol) fibres, for machine embroidery0 %1.1.2007 — 31.12.2008
ex 5501 90 0010Poly(vinyl alcohol) tow0 %1.1.2007 — 31.12.2008
ex 5503 11 0010Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine), of a length not exceeding 7 mm0 %1.1.2007 — 31.12.2008
ex 5601 30 0040
ex 5503 90 1010Acetalized, multicomponent spun fibres with a matrix fibril structure, consisting of emulsion-polymerized poly(vinyl alcohol) and poly(vinyl chloride)0 %1.1.2007 — 31.12.2008
ex 5503 90 9030
ex 5503 90 9020Poly(vinyl alcohol) fibres, whether or not acetalized0 %1.1.2007 — 31.12.2008
ex 5506 90 9010
ex 5601 30 0010
ex 5503 90 9040Fibres wholly of poly(thio-1,4-phenylene)0 %1.1.2007 — 31.12.2008
ex 5601 30 0020Polyester fibres, measuring 0,56 decitex, of a length of 3 mm or more but not exceeding 5 mm0 %1.1.2007 — 31.12.2008
ex 5601 30 0030Acrylic fibres, measuring 0,11 and 0,56 decitex, of a length of 3 mm or more but not exceeding 5 mm0 %1.1.2007 — 31.12.2008
ex 5603 11 1010Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:

—of a thickness of 200 μm or more but not exceeding 280 μm and

—of a weight of 20 g/m2 or more but not exceeding 50 g/m2
0 %1.1.2007 — 31.12.2008
ex 5603 11 9010
ex 5603 12 1010
ex 5603 12 9010
ex 5603 91 1010
ex 5603 91 9010
ex 5603 92 1010
ex 5603 92 9010
ex 5603 11 1020Non-wovens, containing spunbonded fibres of polypropylene or of polypropylene and polyethylene, for the manufacture of napkins and napkin liners for babies and similar sanitary articles (1)0 %1.1.2007 — 31.12.2008
ex 5603 11 9020
ex 5603 12 1020
ex 5603 12 9050
ex 5603 12 9030Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles0 %1.1.2007 — 31.12.2008
ex 5603 13 9030
ex 5603 14 9010
ex 5603 92 9060
ex 5603 93 9040
ex 5603 94 9030
ex 5603 12 9060Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not exceeding 80 g/m2 and an air resistance (Gurley) of 8 s or more but not exceeding 36 s (as determined by the ISO 5636/5 method)0 %1.1.2007 — 31.12.2008
ex 5603 13 9060
ex 5603 12 9070Non-wovens of polypropylene, consisting of a meltblown layer, laminated on each side with spunbonded filaments of polypropylene, of a thickness not exceeding 550 μm and of a weight not exceeding 80 g/m2, in the piece or simply cut into squares or rectangles, not impregnated0 %1.1.2007 — 31.12.2008
ex 5603 13 9070
ex 5603 92 9040
ex 5603 93 9010
ex 5603 13 9040Non-wovens consisting of a central layer of polycarbonate fibres, laminated on each side with spunbonded filaments of polyester, of a weight of more than 130 g/m2 but not exceeding 200 g/m20 %1.1.2007 — 31.12.2008
ex 5603 14 9020
ex 5603 13 9080Polyethylene non-woven, covered on both sides with a non-woven of polypropylene and wood pulp, of a weight of 70 g/m2 or more but not exceeding 90 g/m2, in rolls, for use in the manufacture of wet wipes (1)0 %1.1.2007 — 31.12.2008
ex 5603 93 9030
ex 5603 14 9030Non-wovens, consisting of a central elastomeric film laminated on each side with spunbonded filaments of polypropylene, of a weight of 200 g/m2 or more but not exceeding 300 g/m20 %1.1.2007 — 31.12.2008
ex 5603 91 9030Nonwoven viscose rayon, with a watersoluble starch based binder and having a weight of 12 or more but not more than 18g/m20 %1.1.2007 — 31.12.2008
ex 5603 92 9020Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene0 %1.1.2007 — 31.12.2008
ex 5603 93 9020
ex 5603 92 9050Non-wovens of staple fibres, in rolls, of a width of 78 mm or more but not exceeding 252 mm, for the manufacture of floppy discs (1)0 %1.1.2007 — 31.12.2008
ex 5603 92 9070Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene, of a total thickness not exceeding 50 mm0 %1.1.2007 — 31.12.2008
ex 5603 93 9050
ex 5603 94 9040
ex 5603 94 9020Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips (1)0 %1.1.2007 — 31.12.2008
ex 5604 90 9060Strip, of:

—a polyester layer, laminated on one or both sides to a polymer layer containing glass beads,

—a maximum width of 1,2 mm,

—a maximum thickness of 0,05 mm
0 %1.1.2007 — 31.12.2008
ex 5607 50 9010Twine, unsterilised, wholly of poly(glycollic acid), plaited or braided, with an inner core, for the manufacture of surgical sutures (1)0 %1.1.2007 — 31.12.2008
ex 5803 00 1091Gauze of cotton, of a width of less than 1 500 mm0 %1.1.2007 — 31.12.2008
ex 5903 10 9010Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres0 %1.1.2007 — 31.12.2008
ex 5903 20 9010
ex 5903 90 9920
ex 5903 20 9020Tape of polyester fabric laminated with a metallised polyurethane film containing glass beads, for use in the manufacture of marine life-saving equipment (1)0 %1.1.2007 — 31.12.2008
ex 5906 99 9010Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine)0 %1.1.2007 — 31.12.2008
ex 5907 00 9010Textile fabrics, coated with adhesive in which are embedded spheres of a diameter not exceeding 75 μm0 %1.1.2007 — 31.12.2008
ex 5911 10 0010Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products (1)0 %1.1.2007 — 31.12.2008
ex 5911 90 9010Yarn and strip of impregnated polytetrafluoroethylene, whether or not oiled or graphited0 %1.1.2007 — 31.12.2008
ex 5911 90 9030Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness not exceeding 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more0 %1.1.2007 — 31.12.2008
ex 8421 99 0092
63 051 010Sacks and bags, of a kind used for the packing of goods, used, of jute or of other textile bast fibres of heading No 53030 %1.1.2007 — 31.12.2008
ex 6305 90 0010Sacks and bags, of a kind used for the packing of goods, used, of flax or of sisal0 %1.1.2007 — 31.12.2008
ex 6305 90 0093
ex 6305 90 0095
ex 6307 90 1010Sterile mesh-implant, consisting of a knitted fabric of polypropylene monofilaments, with rounded edges, in forms covered by a square of dimensions not exceeding 31 × 31 cm0 %1.1.2007 — 31.12.2008
ex 6805 10 0010Abrasive in the form of identically shaped particles on a support0 %1.1.2007 — 31.12.2008
ex 6805 20 0010
ex 6805 30 8010
ex 6813 89 0010Friction material, of a thickness of less than 20 mm, not mounted, for the manufacture of friction components of a kind used in automatic transmissions and clutches (1)0 %1.1.2007 — 31.12.2008
ex 6903 20 9010Yarn of continuous ceramic filaments, each filament containing by weight:

—12 % or more of diboron trioxide,

—26 % or less of silicon dioxide and

—60 % or more of dialuminium trioxide
0 %1.1.2007 — 31.12.2008
ex 6914 90 9010
ex 6903 90 9010Beryllium oxide, of a purity by weight of more than 99 %, in the form of blanks, bars, blocks or plates0 %1.1.2007 — 31.12.2008
ex 6909 19 0040
ex 6903 90 9020Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials0 %1.1.2007 — 31.12.2008
ex 6909 12 0020Plate, of dialuminium trioxide and titanium carbide, of dimensions not exceeding 48 × 48 mm, or of a diameter not exceeding 125 mm, for the manufacture of magnetic heads (1)0 %1.1.2007 — 31.12.2008
ex 6909 19 0030Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume not exceeding 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end0 %1.1.2007 — 31.12.2008
ex 6909 19 0050Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:

—2 % or more of diboron trioxide,

—28 % or less of silicon dioxide and

—60 % or more of dialuminium trioxide
0 %1.1.2007 — 31.12.2008
ex 6914 90 9020
ex 6909 19 0060Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume not exceeding 65 liters, having per cm2 of the surface of the cross section one or more closed channels at the tail end0 %1.1.2007 — 31.12.2008
ex 6914 90 9030Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm0 %1.1.2007 — 31.12.2008
ex 7002 10 0010Balls of E-glass, of a diameter of 20,3 mm or more but not exceeding 26 mm0 %1.1.2007 — 31.12.2008
ex 7006 00 9010Glass plate, coated on one side with chromium and/or with a mixture of diindium trioxide and tin dioxide, of dimensions of 260 × 320 mm or more but not exceeding 400 × 400 mm, of a thickness not exceeding 1,2 mm, for the manufacture of liquid crystal displays (1)0 %1.1.2007 — 31.12.2008
ex 7006 00 9020Colour filter, consisting of a glass plate with red, blue and green pixels, having a total thickness of 1,1 mm (± 0,1 mm) and exterior dimensions of 320 × 352 mm or more but not exceeding 320 × 400 mm, for the manufacture of liquid crystal displays (1)0 %1.1.2007 — 31.12.2008
ex 7006 00 9030Glass plate, uncoated, of dimensions of 320 × 352 mm or more but not exceeding 320 × 400 mm, of a thickness of 0,6 mm or more but not exceeding 1,2 mm, for the manufacture of liquid crystal displays (1)0 %1.1.2007 — 31.12.2008
ex 7007 19 2010Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not exceeding 185,42 cm (± 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP videomonitors or television sets (1)0 %1.1.2007 — 31.12.2008
ex 7007 29 0010Glass plate of a diagonal size of 81,28 cm (+/- 1,5cm) or more, but not exceeding 185,42 cm (+/- 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP videomonitors or television sets (1)0 %1.1.2007 — 31.12.2008
ex 7011 10 0010Glass lenses with a stippled front refractor or with a front refractor composed of prismatic elements, with an external diameter of more than 121 mm but not exceeding 125 mm0 %1.1.2007 — 31.12.2008
ex 7011 10 0020Parabolic glass cup, with an external diameter of more than 121 mm but not exceeding 125 mm0 %1.1.2007 — 31.12.2008
ex 7011 90 0010
ex 7011 20 0025Glass cone for cathode-ray tube, of a diagonal measurement of 912 mm (± 5 mm) and a distance from seal edge to the end of the neck of 454,3 mm (± 5 mm)0 %1.1.2007 — 31.12.2008
ex 7011 20 0040Glass face-plate:

—with a diagonal measurement of 366,4 mm (± 1,5 mm) and of dimensions of 246,4 × 315,4 mm (± 1,5 mm),

—with a diagonal measurement of 391 mm (± 1,5 mm) and of dimensions of 261,4 × 326,8 mm (± 1,5 mm),

—with a diagonal measurement of 442 mm (± 1,5 mm) and of dimensions of 293,4 × 369,2 mm (± 1,5 mm),

—with a diagonal measurement of 544,5 mm (± 1,6 mm) and of dimensions of 358 × 454 mm (± 1,6 mm), having a cylindrical curvature,

—with a diagonal measurement of 570,5 mm (± 1,6 mm) and of dimensions of 360 × 486 mm (± 1,6 mm),

—with a diagonal measurement of 629,8 mm (± 3 mm) and of dimensions of 406,5 × 519 mm (± 2 mm), having a cylindrical curvature, or

—with a diagonal measurement of 753 mm (± 1,6 mm) and of dimensions of 471 × 640 mm (± 1,6 mm),

and with a raised edge, for the manufacture of colour cathode-ray tubes (1)
0 %1.1.2007 — 31.12.2008
ex 7011 20 0075Glass face-plate:

—with a diagonal measurement of 604,5 mm (± 3 mm) and of dimensions of 340 × 541 mm (± 2 mm),

—with a diagonal measurement of 639,3 mm (± 3 mm) and of dimensions of 413,6 × 527 mm (± 2 mm),

—with a diagonal measurement of 708 mm (± 3 mm) and of dimensions of 404 × 633 mm (± 2 mm),

—with a diagonal measurement of 723 mm (± 3 mm) and of dimensions of 477 × 602 mm (± 2 mm), or

—with a diagonal measurement of 812,8 mm (± 3 mm) and of dimensions of 463,8 × 725,5 mm (± 2 mm),

having a cylindrical curvature, for the manufacture of colour cathode-ray tubes (1)
0 %1.1.2007 — 31.12.2008
ex 7011 20 0080Glass bulb for monochrome cathode-ray tube, of a diagonal measurement of 3,8 cm or more but not exceeding 51 cm and a nominal neck diameter of 13 mm, 20 mm, 29 mm or 37 mm0 %1.1.2007 — 31.12.2008
ex 7014 00 0010Optical elements of glass (other than those of heading No 7015), not optically worked, other than signalling glassware0 %1.1.2007 — 31.12.2008
ex 7019 12 0010Rovings, measuring 2 600 tex or more but not more than 3 300 tex and of a loss on ignition of 4 % or more but not exceeding 8 % by weight (as determined by the ASTM D 2584-94 method)0 %1.1.2007 — 31.12.2008
ex 7019 12 0015Rovings, measuring 650 tex or more but not more than 2 500 tex, coated with a layer of polyurethane whether or not mixed with other materials0 %1.1.2007 — 31.12.2008
ex 7019 12 0030Rovings, measuring 1 693 tex (± 10 %), coated with a layer of styrene-butadiene rubber (SBR)0 %1.1.2007 — 31.12.2008
ex 7019 12 0040Rovings, measuring 2 040 tex (± 10 %), coated with carbon0 %1.1.2007 — 31.12.2008
ex 7019 12 0050Rovings, measuring 392 tex or more but not more than 2 884 tex, coated with a layer of an acrylic copolymer0 %1.1.2007 — 31.12.2008
ex 7019 12 0060Rovings, measuring 517 tex or more but not more than 3 569 tex, coated with a layer of paraffin0 %1.1.2007 — 31.12.2008
ex 7019 12 0070Rovings, measuring 417 tex or more but not more than 3 180 tex, coated with a layer of poly(sodium acrylate) and poly(acrylic acid)0 %1.1.2007 — 31.12.2008
ex 7019 19 1010Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not exceeding 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers0 %1.1.2007 — 31.12.2008
ex 7019 19 1030Yarn of 22 tex (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 5 μm, in which filaments of a diameter of 4,2 μm or more but not exceeding 5,8 μm predominate0 %1.1.2007 — 31.12.2008
ex 7019 19 1040Yarn of 33, 34 or 51 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 6 μm, in which filaments of a diameter of 5,1 μm or more but not exceeding 6,9 μm predominate0 %1.1.2007 — 31.12.2008
ex 7019 19 1050Yarn of E-glass of 68 or 74 tex (± 7 %), obtained from continuous spun-glass filaments of a nominal diameter of 9 μm, in which filaments of a diameter of 8,1 μm or more but not exceeding 9,9 μm predominate, for the manufacture of woven fabrics for electrical laminates (prepregs) (1)0 %1.1.2007 — 31.12.2008
ex 7019 39 0030Sheet, consisting of a layer of glass fibres and polypropylene, containing by weight 40 % or more but not more than 60 % of glass fibres of a length of 12,7 mm (± 0,2 mm) and a diameter of 16 μm (± 1 μm), covered on one side with a plastic film and on the other side with a plastic layer, of a total thickness not exceeding 1 mm0 %1.1.2007 — 31.12.2008
ex 7019 39 0040Sheet, consisting of chopped glass fibres and thermoplastic polymer, containing by weight 30 % or more but not more than 70 % of glass fibres of a diameter of 16 μm (+/- 1 μm), whether or not covered on one or both sides with a protective plastic layer0 %1.1.2007 — 31.12.2008
ex 7019 39 0050Non-woven product of non-textile glass fibre, for the manufacture of air filters (1)0 %1.1.2007 — 31.12.2011
ex 7019 90 1010Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate0 %1.1.2007 — 31.12.2008
ex 7019 90 1020Non-textile E-glass fibres, of a length not exceeding 3 mm and a diameter of 5 μm, for the manufacture of catalysts for the purification of smokes (1)0 %1.1.2007 — 31.12.2008
ex 7019 90 9910Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulfonated polyethylene0 %1.1.2007 — 31.12.2008
ex 7019 90 9920Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)0 %1.1.2007 — 31.12.2008
ex 7019 90 9930High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)0 %1.1.2007 — 31.12.2008
ex 7116 20 9010Disc of silicon on sapphire0 %1.1.2007 — 31.12.2008
ex 7201 10 1110Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm0 %1.1.2007 — 31.12.2011
ex 7201 10 3010Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon0 %1.1.2007 — 31.12.2011
7202 50 00Ferro-silico-chromium0 %1.1.2007 — 31.12.2008
ex 7202 99 8010Ferro-silicon, nitrided, containing by weight 55 % or more of silicon and 25 % or more of nitrogen0 %1.1.2007 — 31.12.2008
ex 7326 20 8020Metal fleece, consisting of a mass of stainless steel wires of diameters ranging from 0,022 mm to 0,070 mm, compacted by sintering and rolling0 %1.1.2007 — 31.12.2011
ex 7409 19 0010Sheet or plate of polytetrafluoroethylene, with aluminium oxide or titanium dioxide as a filler or reinforced with glass-fibre fabric, laminated on both sides with copper foil0 %1.1.2007 — 31.12.2008
ex 7410 21 0010Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil0 %1.1.2007 — 31.12.2008
ex 7410 21 0040Sheet or plates

—consisting of a central layer of paper, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or

—consisting of multiple layers of paper, impregnated with phenolic resin,

coated on one or both sides with a copper film with a maximum thickness of 0,15 mm
0 %1.1.2007 — 31.12.2008
ex 7419 99 9091Disc (target) with deposition material, consisting of molybdenum silicide:

—containing 1 mg/kg or less of sodium and

—mounted on a copper or aluminium support
0 %1.1.2007 — 31.12.2008
ex 7616 99 9060
ex 7419 99 9092Disc (target) with deposition material, of tungsten or an alloy containing by weight 90 % of tungsten and 10 % of titanium:

—containing 100 μg/kg or less of sodium and

—mounted on a copper or aluminium support
0 %1.1.2007 — 31.12.2008
ex 7616 99 9070
ex 7419 99 9093Disc (target) with deposition material, of titanium:

—containing 50 μg/kg or less of sodium and

—mounted on a copper or aluminium support
0 %1.1.2007 — 31.12.2008
ex 7616 99 9080
ex 7605 19 0010Not alloyed aluminium wire, of a diameter of 2 mm or more but not exceeding 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not exceeding 0,117 mm0 %1.1.2007 — 31.12.2008
ex 7606 11 1020Tape of not alloyed aluminium, with a reflecting film, a transparent polyurethane topcoat, a netting and ceramic anti-skid particles0 %1.1.2007 — 31.12.2008
ex 7606 11 9120Strip with depth-etching, of band-anodic oxidation treated aluminium of a purity by weight of 99,9 % and a thickness of less than 3 mm, for incorporation in bodies for motor vehicles (1)0 %1.1.2007 — 31.12.2008
ex 7606 11 9320
ex 7607 11 9010Plain aluminium foil with the following parameters:

—an aluminium content of 99,98 % or more

—a thickness of 0,070 mm or more but not more than 0,115 mm

—with a cubic texture

of a kind used for high voltage etching (1)
0 %1.1.2007 — 31.12.2011
ex 7613 00 0020Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a capacity of 172 l (± 10 %) and an unfilled weight not exceeding 64 kg0 %1.1.2007 — 31.12.2008
ex 8708 99 9710
ex 7616 99 9015Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts0 %1.1.2007 — 31.12.2008
ex 7616 99 9050Discs of aluminium alloy, of a thickness not exceeding 0,84 mm, for the manufacture of goods of subheading 8523 29 15 (1)0 %1.1.2007 — 31.12.2008
ex 7905 00 0010Plate of an alloy of zinc, ground and polished on one surface and coated with an epoxide resin on the other surface, of rectangular or square shape, of a length of 300 mm or more but not exceeding 2 000 mm and of a width of 300 mm or more but not exceeding 1 000 mm, and containing:

—10 mg/kg or less of iron,

—10 mg/kg or less of lead,

—700 mg/kg or more but not more than 900 mg/kg of aluminium and

—500 mg/kg or more but not more than 900 mg/kg of magnesium,

for the manufacture of sensitised printing plates (1)
0 %1.1.2007 — 31.12.2008
ex 8103 90 9010Welded tube solely of tantalum, or solely of an alloy of tantalum with tungsten containing by weight 3,5 % or less of tungsten0 %1.1.2007 — 31.12.2008
8104 11 00Unwrought magnesium, containing at least 99,8 % by weight of magnesium0 %1.1.2007 — 31.12.2008
ex 8104 90 0010Ground and polished magnesium sheets, of dimensions not exceeding 1 500 × 2 000 mm, coated on one side with an epoxy resin insensitive to light0 %1.1.2007 — 31.12.2008
ex 8104 90 0020Sections, of extruded magnesium, of a length of 800 mm or more but not exceeding 2 900 mm and a width of 15 mm or more but not exceeding 70 mm0 %1.1.2007 — 31.12.2008
ex 8108 20 0010Titanium sponge0 %1.1.2007 — 31.12.2008
ex 8108 30 0010Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium0 %1.1.2007 — 31.12.2008
ex 8108 90 5010Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not exceeding 3,1 mm, of a width of 1 000 mm or more but not exceeding 1 254 mm, for the manufacture of goods of subheading 8714 19 00 (1)0 %1.1.2007 — 31.12.2008
ex 8108 90 5020Alloy of titanium, aluminium and vanadium, containing by weight 2,5 % or more but not more than 3,5 % of aluminium and 2,0 % or more but not more than 3,0 % of vanadium, in sheets or rolls, of a thickness of 0,6 mm or more but not exceeding 0,9 mm, of a width not exceeding 1 000 mm, for the manufacture of goods of subheading 8714 19 00 (1)0 %1.1.2007 — 31.12.2008
ex 8108 90 5030Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of exhaust systems for internal combustion engines (1)0 %1.1.2007 — 31.12.2011
ex 8109 20 0010Non-alloy zirconium, in the form of ingots, containing by weight more than 0,01 % of hafnium, for use in the manufacture of tubes for the chemical industry (1)0 %1.1.2007 — 31.12.2008
ex 8110 10 0010Antimony in the form of ingots0 %1.1.2007 — 31.12.2008
ex 8112 19 0010Beryllium, of a purity by weight of 94 % or more, in the form of bars, plates and sheets0 %1.1.2007 — 31.12.2008
ex 8112 99 3010Alloy of niobium (columbium) and titanium, in the form of bars and rods0 %1.1.2007 — 31.12.2008
ex 8305 20 0010Staples of a width of 12 mm (± 1 mm) and a depth of 8 mm (± 1 mm) for use in copiers and printers (1)0 %1.1.2007 — 31.12.2008
ex 8309 90 9010Aluminium can ends with so-called “ring pull” full aperture with a diameter of 136,5 mm (± 1 mm)0 %1.1.2007 — 31.12.2008
ex 8401 30 0020Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors (1)0 %1.1.2007 — 31.12.2008
ex 8407 31 0010Two stroke internal combustion engine, of a cylinder capacity not exceeding 30 cm3 for use in the manufacture of portable motorised scooters falling within subheading 8711 10 00 (1)0 %1.1.2007 — 31.12.2008
ex 8407 33 9010Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cc and a power of not less than 6 kW but not exceeding 15,5 kW, for the manufacture of:

—self-propelled lawn mowers, with a seat of sub-heading 8433 11 51

—tractors of subheading 8701 90 11, whose main function is that of a lawn mower or

—four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 8433 20 10

 (1)
0 %1.1.2007 — 31.12.2011
ex 8407 90 8010
ex 8407 90 9010
ex 8407 90 1010Four-stroke petrol engines of a cylinder capacity not exceeding 250 cm3 for use in the manufacture of lawnmowers of sub-heading 8433 11 or mowers with motor of subheading 8433 20 10 (1)0 %1.1.2007 — 31.12.2011
ex 8407 90 1020Two-stroke internal combustion engines, having a cylinder capacity not exceeding 125 cm3, for the manufacture of lawnmowers of sub-heading 8433 11 (1)0 %1.1.2007 — 31.12.2008
ex 8408 90 4120Diesel engines of a power not exceeding 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)0 %1.1.2007 — 31.12.2008
ex 8408 90 4320Diesel engines of a power not exceeding 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)0 %1.1.2007 — 31.12.2008
ex 8414 30 8920Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power exceeding 0,4 kW but not exceeding 10 kW0 %1.1.2007 — 31.12.2008
ex 8414 59 2020Axial fan of 170 mm (±10 mm) diameter and 50 mm (±0,10 mm) height, for use in the manufacture of products of CN 8525 (1)0 %1.1.2007 — 31.12.2008
ex 8414 90 0020Aluminium pistons, partially covered with polytetrafluoroethylene, for incorporation into compressors of air conditioning machines of motor vehicles (1)0 %1.1.2007 — 31.12.2008
ex 8414 90 0030Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles (1)0 %1.1.2007 — 31.12.2008
ex 8414 90 0040Drive part, for compressors of air conditioning machines of motor vehicles (1)0 %1.1.2007 — 31.12.2008
ex 8414 90 0050Cross-flow fan, of 97,4 mm (± 0,2 mm) diameter and 645 mm (±1 mm) or 873 mm (+0,5/-1 mm) height made from anti-static, anti-bacterial and heat-resistant, glass fiber reinforced plastic with a minimum temperature resistance of 70 oC, for use in the manufacture of indoor air conditioning units (1)0 %1.1.2007 — 31.12.2011
ex 8415 90 0020Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles (1)0 %1.1.2007 — 31.12.2011
ex 8418 99 9091Welded cooling micro-elements, of an alloy of aluminium, for the manufacture of condensers (1)0 %1.1.2007 — 31.12.2008
ex 8419 19 0010Heat accumulator for motor vehicles, of a coolant capacity of 4 l or more but not exceeding 10 l0 %1.1.2007 — 31.12.2008
ex 8419 89 9810Immersion-tube (coils) bundles, consisting of an assembly of plastic tubes terminating at each end in a honeycomb-structure (end-fitting) surrounded by a pipe-connector0 %1.1.2007 — 31.12.2008
ex 8421 99 0091Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder0 %1.1.2007 — 31.12.2008
ex 8421 99 0093Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not exceeding 3 700 mm and a diameter not exceeding 500 mm0 %1.1.2007 — 31.12.2008
ex 8421 99 0095Parts of equipment for the filtration of magnetic dispersions, consisting essentially of nylon-6 fibres, enclosed in a plastic casing of a diameter of 70 mm (± 2 mm) and a length of 520 mm (± 5 mm)0 %1.1.2007 — 31.12.2008
ex 8422 30 0010Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges (1)0 %1.1.2007 — 31.12.2008
ex 8479 89 9730
ex 8439 99 1010Suction-roll shells, not drilled, in the form of alloy-steel tubes, of a length of 5 207 mm or more and an external diameter of 754 mm or more, for use in machinery for making paper or paperboard (1)0 %1.1.2007 — 31.12.2008
ex 8439 99 9010
ex 8454 30 1010Casting machines for casting under pressure of metal alloys in thixotropic (semi-solid) form0 %1.1.2007 — 31.12.2008
ex 8455 90 0010Helical turn device for cold-rolling mill0 %1.1.2007 — 31.12.2008
ex 8456 10 0010Machine-tool operating by laser beam, for the cutting of slots on the surface of a cylindrical tube for use in the manufacture of endo-vascular prosthesis (so-called “stents”) (1)0 %1.1.2007 — 31.12.2008
ex 8473 40 1810Thermal printer head0 %1.1.2007 — 31.12.2008
ex 8477 80 9910Machines for casting or for surface modification of plastic membranes of heading No 39210 %1.1.2007 — 31.12.2008
ex 8479 89 9720Motor, whether or not mounted on a baseplate, for use in the manufacture of products falling within subheading 8517 12 00 or 8517 69 31 (1)0 %1.1.2007 — 31.12.2008
ex 8501 10 9978
ex 8481 80 5910Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines0 %1.1.2007 — 31.12.2008
ex 8481 80 9950Service valve, consisting a combination of a two way valve on the liquid line and a three way valve on the gas line with:

—a minimum enclosing pressure of 30 kgf/cm2,

—a minimum withstanding pressure of 45 kgf/cm2,

for use in the manufacture of outdoor air conditioning units (1)
0 %1.1.2007 — 31.12.2011
ex 8481 80 9960Four way valve, consisting of:

—a core plunger,

—a sealing plunger,

—a 220 V-240 V AC 50/60 Hz solenoid coil,

—a working pressure up to 4,3 Mpa,

—a housing

for directing the flow of the refrigerant, for use in the manufacture of outdoor air conditioning units (1)
0 %1.1.2007 — 31.12.2011
ex 8483 10 9520Integrally forged and roughly shaped generator and turbine shafts of a weight exceeding 215 tonnes0 %1.1.2007 — 31.12.2008
ex 8483 40 5120Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 (1)0 %1.1.2007 — 31.12.2008
ex 8483 40 5920Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 (1)0 %1.1.2007 — 31.12.2008
ex 8483 40 9020
ex 8501 10 9320Single phased 50 Hz, AC motor driven by permanent single capacitor and having a power output of less than 37 W, for use in the manufacture of indoor split air conditioning units (1)0 %1.1.2007 — 31.12.2011
ex 8501 10 9954DC motor, brushless, with an external diameter not exceeding 25,4 mm, a rated speed of 2 260 (±15 %) or 5 420 (±15 %) rpm, a supply voltage of 1,5 V or 3 V0 %1.1.2007 — 31.12.2008
ex 8501 10 9959DC stepping motor, with an angle of step of 1,8o (±0,09o), a holding torque of 0,156 Nm or more, a coupling flange the exterior dimensions of which do not exceed 43 × 43 mm, a chuck of a diameter of 4 mm (±0,1 mm), a two-phase winding and an output not exceeding 5 W0 %1.1.2007 — 31.12.2008
ex 8501 10 9973DC motor, whether or not mounted on a baseplate, for use in the manufacture of products falling within subheading 8471 70 50 (1)0 %1.1.2007 — 31.12.2008
ex 8501 10 9977DC motor, with brushes, with a typical running torque of 0,004 Nm (±0,001 Nm), with a coupling flange of a diameter of 32 mm (±0,5 mm) and a chuck of a diameter of 2 mm (±0,004 mm), with an internal rotor, a three-phase winding, a rated speed of 2 800 (±10 %) rpm and a supply voltage of 12 V (±15 %)0 %1.1.2007 — 31.12.2008
ex 8501 10 9979DC motor with brushes and an internal rotor with a three-phase winding, of a specified temperature range covering at least — 20 oC to + 70 oC0 %1.1.2007 — 31.12.2008
ex 8501 10 9981DC stepping motor, with an angle of step of 18 o or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 × 68 mm, a two phase winding and an output not exceeding 5 W0 %1.1.2007 — 31.12.2008
ex 8501 10 9982DC motor, brushless, with an external diameter not exceeding 29 mm, a rated speed of 1 500 (±15 %) or 6 800 (±15 %) rpm, a supply voltage of 2 V or 8 V0 %1.1.2007 — 31.12.2008
ex 8501 10 9983Multiphase DC motor, brushless, of a continuous output of 31 W (±5 W) calculated with 600 rpm, equipped with electronic circuit with sensor using Hall effect (electric power steering motor)0 %1.1.2007 — 31.12.2008
ex 8502 40 0020Rotary converter, with a ferrite core, having coils with 2 or 6 windings and a diameter of 0,1 mm, connected to a flexible printed circuit0 %1.1.2007 — 31.12.2008
ex 8503 00 9131Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring0 %1.1.2007 — 31.12.2008
ex 8503 00 9932
ex 8503 00 9931Stamped collector of an electric motor, having an external diameter not exceeding 16 mm0 %1.1.2007 — 31.12.2008
ex 8504 40 9020Direct current to direct current converter0 %1.1.2007 — 31.12.2008
ex 8504 40 9030Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 8516 50 00 (1)0 %1.1.2007 — 31.12.2008
ex 8504 50 9520Inductor with an inductance not exceeding 62 mH0 %1.1.2007 — 31.12.2008
ex 8504 50 9530Multilayer monolithic inductors, contained in a housing of the SMD (surface mounted device) type the exterior dimensions of which do not exceed 1,8 × 3,4 mm, for use in the manufacture of products falling within subheading 8517 11 00, 8517 12 00 or 8517 69 31 (1)0 %1.1.2007 — 31.12.2008
ex 8504 90 1110Ferrite cores, other than for deflection yokes0 %1.1.2007 — 31.12.2008
ex 8504 90 1832Part of a rotary transformer, comprising a ferrite core provided with circular grooves with copper wire windings0 %1.1.2007 — 31.12.2008
ex 8504 90 1840Trans coil for boosting DC voltage and isolating high and low voltages for use in the manufacture of products falling within subheading 8504 31 80 (1)0 %1.1.2007 — 31.12.2011
ex 8505 11 0031Ferrite magnet having a remanence of 455 mT (±15 mT)0 %1.1.2007 — 31.12.2008
ex 8505 11 0033Magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with measurements not exceeding 15 × 10 × 2 mm, or in the shape of disc with a diameter not exceeding 90 mm, whether or not containing a hole in the centre0 %1.1.2007 — 31.12.2008
ex 8505 19 9031Neodymium-ferro ring with an external diameter not exceeding 13 mm, an internal diameter not exceeding 9 mm0 %1.1.2007 — 31.12.2008
ex 8505 19 9032Magnet, for use in the manufacture of deflection yokes (1)0 %1.1.2007 — 31.12.2008
ex 8505 20 0020Electromagnetic wrap spring clutch with a diameter not exceeding 40 mm, for use in the manufacture of copiers and printers, including multi-functional copiers (1)0 %1.1.2007 — 31.12.2008
ex 8505 20 0030Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles (1)0 %1.1.2007 — 31.12.2008
ex 8505 90 1091Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading No 8517 (1)0 %1.1.2007 — 31.12.2008
ex 8505 90 1092Electro-mechanical throttle plate actuator for automotive engines0 %1.1.2007 — 31.12.2008
ex 8506 50 9010Lithium iodine single cell battery the dimensions of which do not exceed 9 × 23 × 45 mm and a voltage not exceeding 2,8 V0 %1.1.2007 — 31.12.2008
ex 8506 50 9020Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit0 %1.1.2007 — 31.12.2008
ex 8506 50 9030Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions not exceeding 28 × 45 × 15 mm and a capacity of not less than 1,05 Ah0 %1.1.2007 — 31.12.2008
ex 8507 30 2020Rectangular accumulator, with a length not exceeding 69 mm, a width not exceeding 36 mm and a thickness not exceeding 12 mm, for use in the manufacture of rechargeable batteries (1)0 %1.1.2007 — 31.12.2008
ex 8507 80 2020
ex 8507 80 3020
ex 8507 80 8020
ex 8507 30 2030Cylindrical nickel-cadmium accumulator, with a length of 65,3 mm (±1,5 mm) and a diameter of 14,5 mm (±1 mm), having a nominal capacity of 1 000 mAh or more, for use in the manufacture of rechargeable batteries (1)0 %1.1.2007 — 31.12.2008
ex 8507 80 2030Cylindrical nickel-hydride accumulator, of a diameter not exceeding 14,5 mm, for the manufacture of rechargeable batteries (1)0 %1.1.2007 — 31.12.2008
ex 8507 80 3030Cylindrical lithium-ion accumulator, with a length of 64,6 mm or more and a diameter of 18,1 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries (1)0 %1.1.2007 — 31.12.2008
ex 8516 90 0031Dual diode, consisting of a power rectifying diode connected with a transformer protector diode through a wire, with a peak reverse power rate of 2 J or more, for use in the manufacture of products falling within subheading 8516 50 00 (1)0 %1.1.2007 — 31.12.2008
ex 8516 90 0033Stainless steel soleplate with heating wire, for use in the manufacture of electric irons (1)0 %1.1.2007 — 31.12.2008
ex 8518 29 9520Loudspeaker having a power of 5 W and an impedance of 4 ohms, with a diameter not exceeding 50 mm, for use in the manufacture of portable phones (1)0 %1.1.2007 — 31.12.2008
ex 8518 30 9520Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 × 6 × 8 mm0 %1.1.2007 — 31.12.2008
ex 8518 40 8120Audio-frequency amplifier unit, comprising at least an audio-frequency amplifier, a static converter and a sound generator, for the manufacture of active loudspeaker boxes (1)0 %1.1.2007 — 31.12.2008
ex 8518 90 0091Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers (1)0 %1.1.2007 — 31.12.2008
ex 8522 90 4940Optical unit consisting of a laser diode with one photodiode, emitting light of a nominal wavelength of 780 nm, contained in a housing with a diameter of not more than 10 mm and a height of not more than 9 mm, with not more than 10 connections0 %1.1.2007 — 31.12.2008
ex 8522 90 4950Electronic assembly for a laser read-head of a compact disc player, comprising:

—a printed circuit,

—a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,

—not more than 3 connectors,

—not more than 1 transistor,

—not more than 3 variable and 4 fixed resistors,

—not more than 5 capacitors,

the whole mounted on a support
0 %1.1.2007 — 31.12.2008
ex 8522 90 4960Printed circuit board mounted with electronic circuits operating at a voltage of 12 V, for use in the manufacture of television sets combined with video units (1)0 %1.1.2007 — 31.12.2008
ex 8522 90 4970Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit0 %1.1.2007 — 31.12.2008
ex 8522 90 8030Thin-film recording and reproducing device, having at least 9 parallel channels for digital signals and at least 2 channels for analogue signals, to which a non-magnetic ceramic substrate is fixed, the whole rounded at one side, for use in the manufacture of magnetic heads for digital sound recording and digital/analogue sound reproducing apparatus of the cassette-type (1)0 %1.1.2007 — 31.12.2008
ex 8522 90 8035Cassette-deck sub-assembly for sound recording and reproducing apparatus, for use in the manufacture of telephone answering machines (1)0 %1.1.2007 — 31.12.2008
ex 8522 90 8040Sound reproducing assembly, comprising a tape deck mechanism of the cassette type, comprising a DC motor, for use in the manufacture of products falling within heading No 8519 (1)0 %1.1.2007 — 31.12.2008
ex 8522 90 8045Roll for magnetic tape guiding and winding, for use in the manufacture of products falling within heading No 8521 or 8522 (1)0 %1.1.2007 — 31.12.2008
ex 8522 90 8050Magnetic head for erasing video tapes, for use in the manufacture of products falling within heading No 8521 or 8522 (1)0 %1.1.2007 — 31.12.2008
ex 8522 90 8055Assembly consisting of a driver circuit, a tacho-sensor and a brushless DC motor0 %1.1.2007 — 31.12.2008
ex 8522 90 8060Analogue sound recording and reproducing assembly, comprising a record/playback head and a twin tape deck mechanism of the cassette type, not comprising circuits with amplification functions or power supply drive functions, for use in the manufacture of products falling within subheadings 8527 91 35 and 8527 91 99 (1)0 %1.1.2007 — 31.12.2008
ex 8522 90 8065Assembly for optical discs, comprising at least an optical unit and DC motors, capable or not of double layer recording0 %1.1.2007 — 31.12.2008
ex 8522 90 8070Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading No 8521 (1)0 %1.1.2007 — 31.12.2008
ex 8522 90 8075Optical reading head for CD player, consisting of one laser diode, one photodetector integrated circuit and one beam splitter0 %1.1.2007 — 31.12.2008
ex 8522 90 8080Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings No 8519, 8521, 8526, 8527, 8528 or 8543 (1)0 %1.1.2007 — 31.12.2008
ex 8548 90 9045
ex 8522 90 8081Laser optical pick up unit for the reproduction of optical signals from CD or DVD and the recording of optical signal on DVD, comprising at least

—a laser diode,

—a laser driver integrated circuit,

—a photo detector integrated circuit,

—a front monitor integrated circuit and an actuator,

for use in the manufacture of products falling within heading No 8521 (1)
0 %1.1.2007 — 31.12.2011
ex 8522 90 8085Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading No 8521 (1)0 %1.1.2007 — 31.12.2008
ex 8522 90 8090Magnetic head for playback of audio tapes, for use in the manufacture of products falling within heading 8519 (1)0 %1.1.2007 — 31.12.2008
ex 8522 90 8095Drive-unit capable of magnetooptical signal recording and optical signal reproducing, comprising at least an optical unit, DC motors and a printed circuit on which are mounted integrated circuits providing drive and signal processing functions for reading optical discs having an external diameter not exceeding 70 mm, not comprising circuits with amplification functions or power supply drive functions0 %1.1.2007 — 31.12.2008
ex 8525 80 1920Assembly for television cameras of dimensions not exceeding 10 × 15 × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution not exceeding 1 024 × 1 280 pixel, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 8517 12 00 (1)0 %1.1.2007 — 31.12.2008
ex 8525 80 1930Compact chassis-type closed circuit television (CCTV) cameras, of a weight of not more than 250 g, contained in a housing of dimensions not exceeding 50 × 60 × 89,5 mm, with a single sensor Charge-Couple Device (CCD), with effective pixels not exceeding 440 000, for use in CCTV surveillance systems (1)0 %1.1.2007 — 31.12.2008
ex 8525 80 1940Assembly for cameras used in computer notebooks of dimensions not exceeding 15 × 25 × 25 mm, comprising an image sensor, an objective and a color processor, having an image resolution not exceeding 1 600 × 1 200 pixel, wether or not fitted with cable and/or housing, wether or not mounted on a base and containing a LED chip (1)0 %1.1.2007 — 31.12.2011
ex 8528 49 1010Video monitor comprising:

—a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen not exceeding 110 mm and equipped with a deflector yoke, and

—a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,

the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus (1)
0 %1.1.2007 — 31.12.2008
ex 8528 59 9020Liquid cristal display colour video monitor having a DC input voltage of 7 V or more but not exceeding 30 V, with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of chapters 84 to 90 and 940 %1.1.2007 — 31.12.2008
ex 8529 10 8020Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (±30 kHz), contained in a housing0 %1.1.2007 — 31.12.2008
ex 8529 10 8025Ceramic filter for a centre frequency of 10,7 MHz, with a bandwidth not exceeding 330 kHz at 3 dB and not exceeding 950 kHz at 20 dB, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8529 10 8030Ceramic filters for frequencies of 4,5 MHz or more but not exceeding 6,6 MHz contained in a housing0 %1.1.2007 — 31.12.2008
ex 8529 10 8035Ceramic filter for a centre frequency of 450 kHz or more but not exceeding 470 kHz, with a bandwidth not exceeding 13 kHz at 3 dB, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8529 10 8040Ceramic filter for a frequency of 450 kHz, with a bandwidth not exceeding 18 kHz at 10 dB, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8529 10 8045Ceramic filter for a centre frequency of 455 kHz (±1,5 kHz), with a bandwidth not exceeding 25 kHz at 6 dB and not exceeding 60 kHz at 40 dB, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8529 10 8050Ceramic filter for a centre frequency of 450 kHz (±1,5 kHz) or 455 kHz (±1,5 kHz), with a bandwidth not exceeding 30 kHz at 6 dB and not exceeding 70 kHz at 40 dB, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8529 10 8055Radio frequency (RF) signal isolator for frequencies of 890 MHz or more but not exceeding 1 990 MHz, having an insertion loss not exceeding 0,7 dB, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8529 10 8060Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not exceeding 1 990 MHz with an insertion loss not exceeding 3,5 dB, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8529 10 8065Ceramic filter package, excluding surface acoustic wave filters, consisting of:

—a transmit filter with a centre frequency of 1 747,5 MHz and an insertion loss not exceeding 2,3 dB at a bandwidth of 75 MHz

and

—a receive filter with a centre frequency of 1 842,5 MHz and an insertion loss not exceeding 3,3 dB at a bandwidth of 75 MHz,

the whole contained in a housing
0 %1.1.2007 — 31.12.2008
ex 8529 10 8070Ceramic filter package, excluding surface acoustic wave filters, comprising 2 filters with one of the following combinations of characteristics:

—a transmit centre frequency of 902,5 MHz, a receive centre frequency of 947,5 MHz and an insertion loss not exceeding 3,2 dB at a bandwidth of 25 MHz

or

—a transmit centre frequency of 1 747,5 MHz, a receive centre frequency of 1 842,5 MHz and an insertion loss not exceeding 3,5 dB at a bandwidth of 75 MHz,

the whole contained in a housing
0 %1.1.2007 — 31.12.2008
ex 8529 10 9520Antenna switch, comprising:

—a transmit filter with a centre frequency of 942,5 MHz or more but not exceeding 1 990 MHz and

—a receive filter with a centre frequency of 847,5 MHz or more but not exceeding 1 990 MHz,

the whole contained in a housing
0 %1.1.2007 — 31.12.2008
ex 8529 90 6530Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing0 %1.1.2007 — 31.12.2008
ex 8548 90 9044
ex 8529 90 6540Analogue sound recording and reproducing assembly, comprising a record/playback head, a single tape deck mechanism of the cassette type, a spindle electric motor, a rotation direction change mechanism and a chassis0 %1.1.2007 — 31.12.2008
ex 8529 90 6550Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under no8521 and no8528 (1)0 %1.1.2007 — 31.12.2011
ex 8529 90 6560Tuner transforming high frequency signals to mid frequency signals for use in the manufacture of sattelite or terrestrial TV receivers for set-top boxes (1)0 %1.1.2007 — 31.12.2011
ex 8529 90 9232Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading No 8528 (1)0 %1.1.2007 — 31.12.2008
ex 8529 90 9234Assembly consisting of a lens unit, having an adjustable focal length of 4 mm or more but not exceeding 69 mm and comprising a zoom encoder, a stepping motor unit, a zoom motor unit, an iris motor unit and a photo interrupter0 %1.1.2007 — 31.12.2008
ex 8529 90 9235Video recording and reproducing assembly, comprising a tape deck mechanism of the cassette type, comprising a DC motor, for use in the manufacture of products falling within heading No 8525 (1)0 %1.1.2007 — 31.12.2008
ex 8529 90 9236Assembly consisting of a monochrome cathode-ray tube with a diagonal measurement of the screen of 143 mm or more but not exceeding 230 mm and a concave focus lens mounted on a liquid-filled cooling armature0 %1.1.2007 — 31.12.2008
ex 8529 90 9237Filter, consisting of 2 piezo-electric crystals each with a frequency of 21 MHz or more but not exceeding 30 MHz and seperately mounted on a bracket, with not more than 7 connections0 %1.1.2007 — 31.12.2008
ex 8529 90 9740
ex 8529 90 9240Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors (1)0 %1.1.2007 — 31.12.2008
ex 8529 90 9241Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors (1)0 %1.1.2007 — 31.12.2008
ex 8529 90 9242Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and integrated circuits in television sets (1)0 %1.1.2007 — 31.12.2008
ex 8529 90 9243Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply0 %1.1.2007 — 31.12.2008
ex 8529 90 9244LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only0 %1.1.2007 — 31.12.2008
ex 8529 90 9245Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats0 %1.1.2007 — 31.12.2008
ex 8529 90 9750Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, mounted on a printed circuit board containing at least integrated circuits for controlling the tape deck mechanism functions, video recording functions and TV-signal processing functions, for use in the manufacture of products falling within heading No 8 528 (1)0 %1.1.2007 — 31.12.2008
ex 8531 80 9520Indicator lamp, consisting of 4 light-emitting diodes made from silicon-cardide (SiC) semiconductor material, operating at a nominal wavelength of 481, 560 or 630 nm, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8531 80 9530Indicator lamp, consisting of 2 light-emitting diodes made from aluminium-gallium-arsenic (AlGaAs) or gallium-phosphor (GaP) semiconductor material, having a rectangular base, contained in a housing of the SMD (surface mounted device) type and having a lens0 %1.1.2007 — 31.12.2008
ex 8531 80 9540Electro-accoustic transducer0 %1.1.2007 — 31.12.2008
ex 8531 80 9550An electromagnetic display, consisting of 7 electromagnetic coils which by means of the residual magnetism in the stators provide that the last indication remains available (set state), and 7 pivoting light-reflecting segments each of which is attached to a bar magnet; assembly comprising such displays0 %1.1.2007 — 31.12.2008
ex 8536 30 3011Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing0 %1.1.2007 — 31.12.2008
ex 8536 30 9031
ex 8536 50 8096
ex 8536 41 1091Thermal relays contained in a hermetically sealed glass cartridge not exceeding 35 mm in length excluding wires, with a maximum leakage rate of 10-6 cm3 He/sec at one bar in the temperature range 0 to 160 oC, to be incorporated into compressors for refrigerating equipment (1)0 %1.1.2007 — 31.12.2008
ex 8536 41 9091
ex 8536 49 0091
ex 8536 50 1131Switch of the printed circuit mount type, operating at a force of 4,9 N (±0,9 N), contained in a housing0 %1.1.2007 — 31.12.2008
ex 8536 50 1132Mechanical tact switch for connecting electronic circuits, operating at a voltage not exceeding 60 V and at a current strength not exceeding 50 mA, for use in the manufacture of television sets (1)0 %1.1.2007 — 31.12.2008
ex 8536 50 1532Rotary switch in form of a wheel with a diameter of between 15 and 16 mm and contacts for closing the circuit, for a rated voltage of 12 V at 50 mA0 %1.1.2007 — 31.12.2008
ex 8536 50 1991Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections0 %1.1.2007 — 31.12.2008
ex 8536 50 1992Hydraulic pressure switch, incorporating a pressure sensitive snap action disc, operating at a supply voltage of 6 V or more but not exceeding 18 V0 %1.1.2007 — 31.12.2008
ex 8536 50 1993Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing0 %1.1.2007 — 31.12.2008
ex 8536 50 8097
ex 8536 50 8093Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time not exceeding 50 ms and an actuating current not exceeding 500 mA at a voltage of 12 V0 %1.1.2007 — 31.12.2008
ex 8536 50 8095Reed switch having a switching power of 20 W or more within the range of 17 — 43 A.turn, in the form of a glass capsule, not containing mercury, the dimensions of which do not exceed 3 × 21 mm, for use in the manufacture of automotive airbag shock-sensors (1)0 %1.1.2007 — 31.12.2008
ex 8536 50 8098Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not exceeding 250 V and at a current strength not exceeding 5 A, for use in the manufacture of television sets (1)0 %1.1.2007 — 31.12.2008
ex 8536 90 8592Metallic stamped frame with connections0 %1.1.2007 — 31.12.2008
ex 8536 90 8593Contact element with a hold-force of more than 3 N, in the form of 2 rectangular plastic frames interconnected by electric conductors0 %1.1.2007 — 31.12.2008
ex 8536 90 8594Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements0 %1.1.2007 — 31.12.2008
ex 8544 49 9310
ex 8537 10 9992Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors0 %1.1.2007 — 31.12.2008
ex 8537 10 9993Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems (1)0 %1.1.2007 — 31.12.2008
ex 8537 10 9994Unit consisting of two junction field effect transistors contained in a dual lead frame housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9020
ex 8537 10 9995Unit consisting of two metal oxide semiconductor field effect transistors contained in a dual lead frame housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9025
ex 8538 90 9992Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 × 48 mm0 %1.1.2007 — 31.12.2008
ex 8540 11 1191Colour cathode-ray tube with a slit or slot mask, equipped with electron guns placed side by side (in-line technology) and with a diagonal measurement of the screen of 12 cm or more but not exceeding 26 cm0 %1.1.2007 — 31.12.2008
ex 8540 11 1193Colour cathode-ray tube, equipped with one gun with three rays and with a diagonal measurement of the screen of 19 cm or more but not exceeding 26 cm0 %1.1.2007 — 31.12.2008
ex 8540 11 1391Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,42 mm and a diagonal measurement of the screen of 49 cm, for use in the manufacture of professional video monitors including security and medical monitor applications (1)0 %1.1.2007 — 31.12.2008
ex 8540 11 1520Full square curved screen colour cathode-ray tube, equipped with an electron gun and a deflection yoke and with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of 68 cm (± 2 mm)0 %1.1.2007 — 31.12.2011
ex 8540 11 1991Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 85 cm or more0 %1.1.2007 — 31.12.2008
ex 8540 11 9131Colour cathode-ray tube with a screen width/height ratio of 16/9 and a diagonal measurement of the screen of 39,8 cm (± 0,3 cm)0 %1.1.2007 — 31.12.2008
ex 8540 12 0082Monochrome cathode-ray tube with a diagonal measurement of the screen of 250 mm or more but not exceeding 320 mm and an anode voltage of 18 kV or more but not exceeding 22 kV0 %1.1.2007 — 31.12.2008
ex 8540 12 0083Monochrome cathode-ray tube, with a diagonal measurement of the screen of 150 mm or more but not exceeding 182 mm, a neck diameter of less than 30 mm and an anode voltage of 25 kV or more but not exceeding 32 kV0 %1.1.2007 — 31.12.2008
ex 8540 12 0084Flat screen monochrome cathode-ray tube, with a diagonal measurement of the screen not exceeding 102 mm0 %1.1.2007 — 31.12.2008
ex 8540 20 8091Photomultiplier consisting of a photocathode tube with 9 or 10 dyodes, for light of a wavelength of 160 nm or more but not exceeding 930 nm, of a diameter not exceeding 14 mm and a height not exceeding 94 mm0 %1.1.2007 — 31.12.2011
ex 8540 40 0031Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, with a diagonal measurement of the screen of more than 72 cm and a distance of less than 0,5 mm between dots of the same colour0 %1.1.2007 — 31.12.2008
ex 8540 60 0031
ex 8540 40 0032Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, having a diagonal measurement of the screen not exceeding 72 cm0 %1.1.2007 — 31.12.2008
ex 8540 60 0032
ex 8540 40 0033Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,35 mm and a diagonal measurement of the screen not exceeding 53 cm0 %1.1.2007 — 31.12.2008
ex 8540 40 0034Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,39 mm and a diagonal measurement of the screen of 33 cm or more but not exceeding 38 cm0 %1.1.2007 — 31.12.2008
ex 8540 40 0035Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,35 mm and a diagonal measurement of the screen not exceeding 72 cm, for use in the manufacture of monitors (1)0 %1.1.2007 — 31.12.2008
ex 8540 40 0036Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,30 mm and a diagonal measurement of the screen not exceeding 58 cm0 %1.1.2007 — 31.12.2008
ex 8540 50 0031Flat screen monochrome cathode-ray tube, with a diagonal measurement of the screen of 142 mm or more but not exceeding 190 mm, a luminescence of 300 lumen or more but not exceeding 2 000 lumen, a resolution of 0,06 mm or more but not exceeding 0,1 mm, phosphor types P1 or P22 or P53 or P55 or P56, an anode voltage of more than 34 kV, a focus voltage of more than 7 kV and a cathode current of 3 mA or more0 %1.1.2007 — 31.12.2008
ex 8540 60 0033
ex 8540 50 0032Monochrome cathode-ray tube with a diagonal measurement of the screen of 176 mm or more but not exceeding 520 mm and a neck diameter not exceeding 21 mm0 %1.1.2007 — 31.12.2008
ex 8540 60 0034
ex 8540 71 0020Continuous wave magnetron with a fixed frequency of 2 460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 8516 50 00 (1)0 %1.1.2007 — 31.12.2008
ex 8540 89 0091Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons0 %1.1.2007 — 31.12.2008
ex 8540 89 0092Vacuum fluorescent display tube0 %1.1.2007 — 31.12.2008
ex 8540 91 0031Electron gun, for use in the manufacture of colour cathode-ray tubes of subheading 8540 40 00 with a diagonal measurement of the screen of 34 cm or more but not exceeding 39 cm (1)0 %1.1.2007 — 31.12.2008
ex 8540 91 0032Electron gun of colour cathode-ray tubes with an anode voltage of 27,5 kV or more but not exceeding 36 kV0 %1.1.2007 — 31.12.2008
ex 8540 91 0036Flat masks, with:

—a width of 592,8 mm (+/- 0,5 mm)

—a height of 463,1 mm (+/- 0,5 mm)

—a thickness of 250 μm (+/- 10 μm)

—a width of the apertures in the centre of 180 μm (+/- 8 μm)

—a width of the apertures at the edge of 210 μm (+/- 8 μm)
0 %1.1.2007 — 31.12.2008
ex 8540 91 0092Slit or slot mask, excluding masks with continuously vertical slits, with a diagonal measurement of 69 cm or less0 %1.1.2007 — 31.12.2011
ex 8540 91 0093Electron gun for the production of monochrome cathode-ray tubes with a diagonal measurement of the screen of 7,6 cm or more but not exceeding 30,5 cm (1)0 %1.1.2007 — 31.12.2008
ex 8540 91 0096Assembly for cathode-ray tubes with 2 or more but not more than 6 coils, a plastic support and a metal fixing ring, for the adjustment of display sharpness and/or convergence0 %1.1.2007 — 31.12.2008
ex 8540 91 0097Slit mask, consisting of continuously vertical slits measuring more than 275 mm in the length0 %1.1.2007 — 31.12.2008
ex 8540 91 0098Frame of molybdenum chrome steel, for use in the manufacture of cathode-ray tubes (1)0 %1.1.2007 — 31.12.2008
ex 8540 99 0091Anode, cathode or output part, or an assembly comprising these components (magnetron core tube), for the manufacture of magnetrons of subheading 85 407 100 (1)0 %1.1.2007 — 31.12.2008
ex 8543 10 0010Electron beam accelerator systems, with an operating voltage not exceeding 1,5 MV and a beam current not exceeding 70 mA0 %1.1.2007 — 31.12.2008
ex 8543 70 9030Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9035Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not exceeding 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9040Rectifier assembly of power barrier diodes, consisting of 2 diodes with an average forward current not exceeding 600 A and a repetitive reverse peak voltage not exceeding 40 V, each contained in a housing and connected by a common cathode0 %1.1.2007 — 31.12.2008
ex 8543 70 9045Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9050Mechanical vibratory gyroscope driven by a 25 or 26 kHz oscillator, comprising a differential amplifier and a detector circuit, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9055Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9060Oscillator, with a centre frequency of 20 GHz or more but not exceeding 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9065Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9070Overvoltage suppression assembly, comprising 8 diodes, having a reverse stand-off voltage not exceeding 4,5 V, a reverse leakage current not exceeding 10 μA, a peak pulse current not exceeding 30 A and a nominal capacitance of 50 pF, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9075Charged coupled device (CCD) scanner assembly, for a real-time film scanning system, having optical functions, illumination functions and signal processing functions0 %1.1.2007 — 31.12.2008
ex 8543 70 9080Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9085Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8543 70 9090Fuel cell module consisting of:

—polymer electrolyte membrane fuel cells in a housing with an integrated cooling system,

—a voltage monitoring unit and connections,

for use in the manufacture of car propulsion systems (1)
0 %1.1.2007 — 31.12.2008
ex 8543 90 0020Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips0 %1.1.2007 — 31.12.2008
ex 8543 90 0030Assembly of products falling within heading No 8541 or 8542 mounted on a printed circuit, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8544 60 1010Anode cap cable, for use in the manufacture of fly back transformers (1)0 %1.1.2007 — 31.12.2008
ex 8545 19 9020Carbon electrodes, for use in the manufacture of zinc-carbon batteries (1)0 %1.1.2007 — 31.12.2008
ex 8545 90 9001Cell and battery carbon, in the form of rods, with a length of 34 mm or more but not exceeding 160 mm and a diameter not exceeding 12 mm0 %1.1.2007 — 31.12.2008
ex 8547 10 1010Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallized, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not exceeding 250 mm, for the manufacture of vacuum interrupters (1)0 %1.1.2007 — 31.12.2008
ex 8548 90 9038Parts, for use in the manufacture or the repair of products falling within subheading 8443 31 10 (1)0 %1.1.2007 — 31.12.2008
ex 8548 90 9040Infrared signal receiver unit, consisting of a photodiode and at least an amplifier in the form of a monolithic integrated circuit, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8548 90 9041Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not exceeding 40 MHz and a capacitor, contained in a housing0 %1.1.2007 — 31.12.2008
ex 8548 90 9042Clock/calendar circuit, consisting of a printed circuit on which are mounted at least a quartz oscillator and a monolithic integrated circuit, the whole contained in a housing0 %1.1.2007 — 31.12.2008
ex 9110 90 0094
ex 8548 90 9043Contact image sensor0 %1.1.2007 — 31.12.2008
ex 8548 90 9047Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 450 nm or more but not exceeding 660 nm, contained in a lead frame housing having a circular opening whose exterior dimensions without fittings — do not exceed 4 × 4 mm0 %1.1.2007 — 31.12.2008
ex 8548 90 9048Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not exceeding 815 nm0 %1.1.2007 — 31.12.2008
ex 8548 90 9049LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only0 %1.1.2007 — 31.12.2008
ex 8708 99 9720Metal housing caps for incorporation into balancing-arms or spherical bearings used in the suspension systems for the front wheels of motor vehicles (1)0 %1.1.2007 — 31.12.2011
ex 8711 10 0010Portable motorised scooter, presented unassembled or disassembled0 %1.1.2007 — 31.12.2008
ex 9001 10 9010Image reverser made up from an assembly of optical fibres0 %1.1.2007 — 31.12.2008
ex 9001 20 0010Material consisting of a polarising film, supported on one or both sides by transparent material0 %1.1.2007 — 31.12.2008
ex 9001 20 0020Diffuser sheets for use in the manufacture of LCD modules (1)0 %1.1.2007 — 31.12.2011
ex 9001 90 0055
ex 9001 20 0030Prism sheets for use in the manufacture of LCD modules (1)0 %1.1.2007 — 31.12.2011
ex 9001 90 0065
ex 9001 90 0020Rear projection screen, comprising a Fresnel lens of plastic and a polarising sheet of plastic, for use in the manufacture of products falling within heading No 8528 (1)0 %1.1.2007 — 31.12.2008
ex 9001 90 0025Lens of plastic, unmounted, having a focal length of 3,86 mm (±0,1 mm) and with a diameter not exceeding 8 mm, for use in the manufacture of compact disc players (1)0 %1.1.2007 — 31.12.2008
ex 9001 90 0030Optical fibre plate, for use in the manufacture of screens and photocathodes for image intensifiers (1)0 %1.1.2007 — 31.12.2008
ex 9001 90 0035Rear projection screen, comprising a lenticular plastic plate0 %1.1.2007 — 31.12.2008
ex 9001 90 0040Prism for the splitting of light, unmounted, for use in the manufacture of charged-coupled image (CCD) cameras (1)0 %1.1.2007 — 31.12.2008
ex 9001 90 0045Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends0 %1.1.2007 — 31.12.2008
ex 9001 90 0050Lens of plastic, unmounted, for use in the manufacture of products falling within subheading 9006 40 00 (1)0 %1.1.2007 — 31.12.2008
ex 9002 11 0010Adjustable lens unit, having a focal length of 90 mm or more but not exceeding 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not exceeding 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors (1)0 %1.1.2007 — 31.12.2008
ex 9002 11 0050Lens unit, having a focal length of 25 mm or more but not exceeding 150 mm, consisting of glass or plastic lenses, with a diameter of 60 mm or more but not exceeding 190 mm0 %1.1.2007 — 31.12.2008
ex 9002 11 0060Optical element, comprising one or more mounted lenses of plastic, for use in the manufacture of products falling within subheading 9006 40 00 (1)0 %1.1.2007 — 31.12.2008
ex 9002 19 0010Lens unit, having a focal length of 24,96 mm (±0,1 mm), a diameter of 16 mm and a length of 16 mm, for use in the manufacture of products falling within subheading 8443 31 10 (1)0 %1.1.2007 — 31.12.2008
ex 9002 20 0010Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 (1)0 %1.1.2007 — 31.12.2008
ex 9002 90 0020Lens, mounted, having a fixed focal length of 3,8 mm (±0,19 mm) or 8 mm (±0,4 mm), with a relative aperture of F2.0 and a diameter not exceeding 33 mm, for use in the manufacture of charged-coupled (CCD) cameras (1)0 %1.1.2007 — 31.12.2008
ex 9002 90 0030Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not exceeding 1,15 mm, embedded between 2 plastic plates0 %1.1.2007 — 31.12.2008
ex 9002 90 0040Lens and image gate assembly, for a real-time film scanning system, comprising a lens consisting of 9 or 11 elements and having an illumination function0 %1.1.2007 — 31.12.2008
ex 9002 90 0050Lenses, mounted, for use in the manufacture of projection TV (1)0 %1.1.2007 — 31.12.2008
ex 9006 91 0010Parts, for use in the manufacture of products falling within subheading 9006 40 00 (1)0 %1.1.2007 — 31.12.2008
ex 9013 80 9010Polarisation insensitive fibre-optic isolator, operating at a wavelength of 1 200 nm or more, contained in a cylindrical housing0 %1.1.2007 — 31.12.2008
ex 9013 80 9020Optical switch, comprising at least one optical input and two optical outputs and with electrical connectors0 %1.1.2007 — 31.12.2008
ex 9017 90 0010Thermal printer head, comprising at least 7 168 heater elements mounted on 2 or more ceramic supports, the whole contained in a housing the exterior dimensions of which exceed 21 × 39 × 639 mm0 %1.1.2007 — 31.12.2008
ex 9022 30 0010X-ray tube with a target voltage of 4 kV or more but not exceeding 30 kV, a power not exceeding 9 W and a target current not exceeding 2 mA0 %1.1.2007 — 31.12.2008
ex 9027 10 9010Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing0 %1.1.2007 — 31.12.2008
ex 9031 80 3430Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing0 %1.1.2007 — 31.12.2008
ex 9031 80 3830
ex 9031 80 3810Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing0 %1.1.2007 — 31.12.2008
ex 9031 80 3820Machines and apparatus for the automatic testing of the integrity of ink-jet cartridge housings (1)0 %1.1.2007 — 31.12.2008
ex 9031 90 8520Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing0 %1.1.2007 — 31.12.2008
ex 9032 10 8120Thermostat, comprising a snap-action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing0 %1.1.2007 — 31.12.2008
ex 9032 89 0020Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm0 %1.1.2007 — 31.12.2008
ex 9032 89 0030Electronic controller of eletric power steering (EPS controller)0 %1.1.2007 — 31.12.2008
ex 9106 90 1010Timer assembly, for use in the manufacture of goods of subheading 8516 50 00 (1)0 %1.1.2007 — 31.12.2008
ex 9107 00 0020Mechanical timer for use in the manufacture of no-frost refrigerators (1)0 %1.1.2007 — 31.12.2011
ex 9110 12 0091Assembly consisting of a printed circuit on which are mounted one quartz oscillator, at least one watch circuit and, whether or not integrated, at least one capacitor, of a thickness not exceeding 5 mm0 %1.1.2007 — 31.12.2008
ex 9110 90 0092Assembly consisting of a printed circuit on which is mounted a watch circuit or a watch circuit and a quartz oscillator, of a thickness not exceeding 5 mm0 %1.1.2007 — 31.12.2008
ex 9114 90 0091
ex 9110 90 0093Assembly consisting of a printed circuit on which is mounted at least one watch circuit, a quartz oscillator and a piezo-electric sound element, with a thickness exceeding 5 mm0 %1.1.2007 — 31.12.2008
ex 9405 40 3510Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (±0,2 mm), of a length of 420 mm (±1 mm) or more, but not exceeding 600 mm (±1 mm), for the manufacture of goods of heading 8528 (1)0 %1.1.2007 — 31.12.2008
ex 9608 91 0010Non-fibrous plastic pen-tips with an internal channel0 %1.1.2007 — 31.12.2008
ex 9608 91 0020Felt tips and other porous-tips for markers, without internal canal0 %1.1.2007 — 31.12.2008
ex 9612 10 1010Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)0 %1.1.2007 — 31.12.2008
ex 9613 90 0020Piezo-electric ignition mechanism, whether or not with complementary elements0 %1.1.2007 — 31.12.2008

’

(1) Entry under this subheading is subject to conditions laid down in the relevant Community provisions (see Articles 291 to 300 of Commission Regulation (EEC) No. 2454/93 — OJ L 253 11.10.1993 p. 1 and subsequent amendments).

(2) The suspension shall apply to fish intended to undergo any operation unless they are intended to undergo exclusively one or more of the following operations:

—cleaning, gutting, tailing, heading,

—cutting (excluding filleting or cutting of frozen blocks, or splitting of frozen interleaved fillet blocks),

—sampling, sorting,

—labelling,

—packing,

—chilling,

—freezing,

—deep freezing,

—thawing, separation.

The suspension is not allowed for products intended, in addition, to undergo treatment (or operations) qualifying for suspension where such treatment (or operations) is (are) carried out at retail or catering level. The suspension of customs duties shall apply only to fish intended for human consumption.

(3) However, the suspension is not allowed where processing is carried out by retail or catering undertakings.